Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Diffusion coefficient”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Interdiffusion in the Ni/TD-NiCr and Cr/TD-NiCr systems

The diffusion of Ni and Cr into TD-NiCr has been studied over the 900 to 1100 C temperature range. The diffusion couples were prepared by electroplating Cr and Ni on polished TD-NiCr wafers. Concentration profiles produced as a result of isothermal diffusion at 905, 1000, and 1100 C were determined by electron microprobe analysis. The Boltzmann-Matano analysis was used to determine concentration-dependent diffusion coefficients which were found to compare favorably with previously reported values. These data suggest that 2 vol % ThO2 distribution has no appreciable effect on the rates of diffusion in TD-NiCr with a large grain size. This supports the view that an inert dispersoid in an alloy matrix will not in itself lead to enhanced diffusion unless a short-circuit diffusion structure is stabilized.

Pawar, A. V.↗

Diffusion and solubility of oxygen in silver

The diffusion and solubility of oxygen in Ag in the temperature range between 412 and 862 C was determined. The following interpolation formula was found for the solubility: L = 8.19.1/100.exp(-11 860/RT)Mol O2/g.At.Ag.at 1/.5. The process obeys the Sieverts square root law within the limits of error. The dissolution of oxygen in Ag may be accompanied by the dissociation of the oxygen molecules into atoms. The tests on Ag-foils reveal that below a temperature of about 500 C a higher solubility is simulated by the adsorption of oxygen. The diffusion coefficient of oxygen in silver obeys the following equation: D = 2.72.1/100.exp(-11 000/RT)sq cm/s. The relatively low activation energy of 11 kcal/g.At suggests that the diffusion of oxygen takes places over interstitial sites.

Eichenauer, W.↗

Effect of lithium diffusion into Ga 2 O 3 thin films

The integration of lithium based compounds (e.g., Li:NiO/Ga 2 O 3 , LiGa 5 O 8 /Ga 2 O 3 ) in Ga 2 O 3 based pn-heterojunctions raises concerns about interface stability, i.e., Li diffusion effects on Ga 2 O 3 properties. In this work the ex-situ diffusion of Li is investigated in three different Ga 2 O 3 epilayers systems [(001) κ-Ga 2 O 3 and (−201) β-Ga2O3 heteroepitaxy on (001) α-Al 2 O 3 , and (010) β-Ga 2 O 3 homoepitaxy] at relevant temperatures for the synthesis / processing of Li-based epilayers. It is here experimentally demonstrated and quantified the Li diffusion in all the investigated Ga 2 O 3 epilayers systems and Li bulk (D Li,bulk ) and 2D defects (D Li,2D ) diffusion coefficients are provided. In the case of the (010) β-Ga 2 O 3 homoepitaxial layer (nominally free of structural defects), hybrid functional theory calculations foresee a diffusion mechanism mediated by Ga vacancies (VGa). Moreover, in the (010) β-Ga 2 O 3 homo-layer a significant effect on its functional properties (e.g., additional Raman vibrational modes, induced conductivity in an otherwise insulating sample) upon the Li-diffusion process is experimentally highlighted and tentatively related to the passivation of acceptor defects (i.e., formation of V Ga -nLi complexes).

Defects↗

Diffusion in intact secondary cell wall models of plants at different equilibrium moisture content

Secondary plant cell walls are composed of carbohydrate and lignin polymers, and collectively represent a significant renewable resource. Leveraging these resources depends in part on a mechanistic understanding for diffusive processes within plant cell walls. Common wood protection treatments and biomass conversion processes to create biorefinery feedstocks feature ion or solvent diffusion within the cell wall. X-ray fluorescence microscopy experiments have determined that ionic diffusion rates are dependent on cell wall hydration as well as the ionic species through non-linear relationships. In this work, we use classical molecular dynamics simulations to map the diffusion behavior of different plant cell wall components (cellulose, hemicellulose, lignin), ions (Na + , K + , Cu2 + , Cl - ) and water within a model for an intact plant cell wall at various hydration states (3-30 wt% water). From these simulations, we analyze the contacts between different plant cell wall components with each other and their interaction with the ions. Generally, diffusion increases with increasing hydration, with lignin and hemicellulose components increasing diffusion by an order of magnitude over the tested hydration range. Ion diffusion depends on charge. Positively charged cations preferentially interact with hemicellulose components, which include negatively charged carboxylates. As a result, positive ions diffuse more slowly than negatively charged ions. Measured diffusion coefficients are largely observed to best fit piecewise linear trends, with an inflection point between 10 and 15% hydration. These observations shed light onto the molecular mechanisms for diffusive processes within secondary plant cell walls at atomic resolution.

09 BIOMASS FUELS↗

Thermal properties of HfN-MoW surrogate cermet fuel for nuclear thermal propulsion

Here, the thermal properties of MoW-HfN, a surrogate cermet for MoW-UN nuclear thermal propulsion fuel, were characterized over a wide range of elevated temperatures. Thermal diffusivity, coefficient of thermal expansion (CTE), and heat capacity were measured. Optical and scanning electron microscopy were performed to characterize the microstructure and draw structure–property correlations. The thermal diffusivity was obtained using the laser flash method. Diffusivity values ranged from about 0.18 cm 2 /s at 200°C to 0.15 cm 2 /s at 1800°C. The CTE was measured using push-rod dilatometry up to 1600°C, giving values between 6.0 and 9.0 μm/m. A scientific rationalization of the effective material properties is made using the rule-of-mixtures and other effective properties models.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Self-diffusion of carbon and oxygen in dolomite.

Self-diffusion of carbon and oxygen in dolomite was measured by isotopic exchange with CO2 at 645-785 C at 120-935 bars pressure. Several runs were also made with calcite under comparable experimental conditions. The principal findings of this study are that (1) the self-diffusion coefficients of both carbon and oxygen in dolomite are approximately 100 times larger than the values in calcite over the temperature range investigated and (2) oxygen self-diffusion in calcite is accelerated by high CO2 pressure.

Anderson, T. F.↗

Mass Dependency of Isotope Fractionation of Gases Under Thermal Gradient and Its Possible Implications for Planetary Atmosphere Escaping Process

Physical processes that unmix elements/isotopes of gas molecules involve phase changes, diffusion (chemical or thermal), effusion and gravitational settling. Some of those play significant roles for the evolution of chemical and isotopic compositions of gases in planetary bodies which lead to better understanding of surface paleoclimatic conditions, e.g. gas bubbles in Antarctic ice, and planetary evolution, e.g. the solar-wind erosion induced gas escaping from exosphere on terrestrial planets.. A mass dependent relationship is always expected for the kinetic isotope fractionations during these simple physical processes, according to the kinetic theory of gases by Chapman, Enskog and others [3-5]. For O-bearing (O16, -O17, -O18) molecules the alpha O-17/ alpha O-18 is expected at 0.5 to 0.515, and for S-bearing (S32,-S33. -S34, -S36) molecules, the alpha S-33/ αlpha S-34 is expected at 0.5 to 0.508, where alpha is the isotope fractionation factor associated with unmixing processes. Thus, one isotope pair is generally proxied to yield all the information for the physical history of the gases. However, we recently] reported the violation of mass law for isotope fractionation among isotope pairs of multiple isotope system during gas diffusion or convection under thermal gradient (Thermal Gradient Induced Non-Mass Dependent effect, TGI-NMD). The mechanism(s) that is responsible to such striking observation remains unanswered. In our past studies, we investigated polyatomic molecules, O2 and SF6, and we suggested that nuclear spin effect could be responsible to the observed NMD effect in a way of changing diffusion coefficients of certain molecules, owing to the fact of negligible delta S-36 anomaly for SF6.. On the other hand, our results also showed that for both diffusion and convection under thermal gradient, this NMD effect is increased by lower gas pressure, bigger temperature gradient and lower average temperature, which indicate that the nuclear spin effect may not be the significant contributor as the energies involved in the hyperfine effect are much smaller than those with molecular collisions, especially under convective conditions.

Sun, Tao↗

Cs retention and diffusion in C-S-H at different Ca/Si ratio

Cement and concrete are commonly used in the construction of repository sites for radioactive wastes. The correct isolation of those contaminants requires good adsorption and low diffusion rates. Both parameters are highly affected by many factors, such as pH, temperature or composition. The large variability of experimental conditions and formulations makes it extraordinarily difficult to tackle the influence of each of them independently in experimental samples. To this effect, molecular dynamics simulations have been employed in this study to investigate the role of the composition in the capacity to retain Cs and diffusivity of these ions in calcium silicate hydrate (C-S-H) gel pores. The results indicate that the adsorption of Cs ions is worsened at high Ca/Si ratios due to a lower interaction of the cations with the C-S-H surface, while hydrophilicity of the C-S-H nanopore rises, resulting in higher long-range ordering and lower diffusion coefficients of Cs ions.

36 MATERIALS SCIENCE↗

Solid-State Hydroxide Ion Conductivity in Silver(I) Oxide, Ag 2 O

Silver (I) oxide, Ag 2 O, precipitated as microcrystals by combining aqueous silver(I) nitrate and KOH solutions, was found to be a solid-state hydroxide ion conductor with ionic conductivity on the order of 10 -3 S/cm. The proton chemical shifts at 4.87 and -7.35 ppm measured by solid-state 1H-NMR experiments are attributed to water molecules and in-lattice OH - coordinated to silver, respectively. The lack of spinning sidebands around the 4.87 ppm peak indicates rapid reorientation on the NMR timescale, suggesting that the water molecules are adsorbed to the surface of the Ag 2 O crystals. Pulsed field gradient measurements gave similar diffusion coefficients (2 x 10 -7 cm 2 /s at 298K) for all three proton environments indicating chemical exchange between sites on the millisecond timescale. The activation energy for OH - diffusion measured by NMR (0.18 eV) was comparable to that obtained by conductivity measurements and density functional theory (DFT) electronic structure calculations. Furthermore, the calculated Pourbaix diagram of Ag 2 O is consistent with the slightly lower sample density observed in He pycnometry and thermogravimetric measurements.

25 ENERGY STORAGE↗

Robust estimation of charge carrier diffusivity using transient photoluminescence microscopy

Transient microscopy has emerged as a powerful tool for imaging the diffusion of excitons and free charge carriers in optoelectronic materials. In many excitonic materials, extraction of diffusion coefficients can be simplified because of the linear relationship between signal intensity and local excited state population. However, in materials where transport is dominated by free charge carriers, extracting diffusivities accurately from multidimensional data is complicated by the nonlinear dependence of the measured signal on the local charge carrier density. To obtain accurate estimates of charge carrier diffusivity from transient microscopy data, statistically robust fitting algorithms coupled to efficient 3D numerical solvers that faithfully relate local carrier dynamics to raw experimental measurables are sometimes needed. Here, we provide a detailed numerical framework for modeling the spatiotemporal dynamics of free charge carriers in bulk semiconductors with significant solving speed reduction and for simulating the corresponding transient photoluminescence microscopy data. To demonstrate the utility of this approach, we apply a fitting algorithm using a Markov chain Monte Carlo sampler to experimental data on bulk CdS and methylammonium lead bromide (MAPbBr 3 ) crystals. Parameter analyses reveal that transient photoluminescence microscopy can be used to obtain robust estimates of charge carrier diffusivities in optoelectronic materials of interest, but that other experimental approaches should be used for obtaining carrier recombination constants. Additionally, simplifications can be made to the fitting model depending on the experimental conditions and material systems studied. Our open-source simulation code and fitting algorithm are made freely available to the scientific community.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Absorption of energetic protons by Saturn's Ring G

A reexamination of Pioneer 11 data for the distribution of energetic protons in Saturn's inner magnetosphere has yielded an improved value for the ratio of the cosmic ray albedo neutron decay source strength to the radial diffusion coefficient, and the use of the Blake et al. (1983) lower limit on the source strength is used to find an upper limit on the mean residence time against diffusion. By means of Voyager data on normal optical opacity and radial width, it is found that the particulates in Saturn's Ring G have an efective radius of more than about 0.035 cm, an areal mass density of 1.4 x 10 to the -6th g/sq cm, and an areal number density of 0.008/sq cm. It is reasonably certain that there are no satellites having a radius of the order of 1 km or larger associated with Ring G.

Van Allen, J. A.↗

Comment on 'Comparison of observed and calculated implanted ion distributions outside Comet Halley's bow shock' by T. I. Gombosi, M. Neugebauer, A. D. Johnstone, A. J. Coates, and D. E. Huddleston

It is argued that the formulation used by Gombosi (1991) does not distinguish between two fundamental types of resonant interactions (those between cometary pickup ions and LF electromagnetic waves). Two problems arise from using their overly simplified expressions. The wave polarization of the solar wind Alfven wave is not purely right-handed, and values from alpha sub com and alpha sub sw are not well known, nor are the 'polarizations' of the 'backward'-going waves in either case. Gombosi et al. discuss the antisunward vs the sunward propagating solar wind Alfven wave, and assume a reasonable value of 0.2 for alpha sub sw. However, alpha sub com is totally unknown. It is concluded that a more correct analysis of wave polarization can lead to significant changes in the formulation and results from Gombosi et al. In his reply Gombosi argues that his simplified wave-particle interaction model is consistent with Giotto observations and plasma kinetic simulations and it leads to a reasonable approximation of the implanted ion transport coefficients. The more complicated approach suggested by Tsurutani & Thorne (1993) requires the introduction of several ad hoc parameters and it does not lead to any change of the energy diffusion coefficient.

Tsurutani, Bruce T.↗

Calculating Mass Diffusion in High-Pressure Binary Fluids

A comprehensive mathematical model of mass diffusion has been developed for binary fluids at high pressures, including critical and supercritical pressures. Heretofore, diverse expressions, valid for limited parameter ranges, have been used to correlate high-pressure binary mass-diffusion-coefficient data. This model will likely be especially useful in the computational simulation and analysis of combustion phenomena in diesel engines, gas turbines, and liquid rocket engines, wherein mass diffusion at high pressure plays a major role.

Bellan, Josette↗

Transport coefficients of the quark-gluon plasma at the critical point and across the first-order line

A bottom-up Einstein-Maxwell-dilaton holographic model is used to compute, for the first time, the behavior of several transport coefficients of the hot and baryon-rich strongly coupled quark-gluon plasma at the critical point and also across the first-order phase transition line in the phase diagram. The observables under study are the shear and bulk viscosities, the baryon and thermal conductivities, the baryon diffusion, the jet quenching parameter $\hat{q}$, as well as the heavy-quark drag force and the Langevin diffusion coefficients. These calculations provide a phenomenologically promising estimate for these coefficients, given that our model quantitatively reproduces lattice QCD thermodynamics results, both at zero and finite baryon density, besides naturally incorporating the nearly perfect fluidity of the quark-gluon plasma. Here we find that the diffusion of baryon charge, and also the shear and bulk viscosities, are suppressed with increasing baryon density, indicating that the medium becomes even closer to perfect fluidity at large densities. On the other hand, the jet quenching parameter and the heavy-quark momentum diffusion are enhanced with increasing density. The observables display a discontinuity gap when crossing the first-order phase transition line, while developing an infinite slope at the critical point. The transition temperatures associated with different transport coefficients differ in the crossover region but are found to converge at the critical point.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Improved lithium storage capacity and high rate capability of nitrogen-doped graphite-like electrode materials prepared from thermal pyrolysis of graphene quantum dots

Adopting a solid-phase microwave-assisted technique followed by thermal pyrolysis of N-functionalized graphene quantum dots, novel nitrogen-doped graphite-like (NGL) electrode materials were synthesized in this work and served as the anode for Li-ion batteries. The NGL anode demonstrated reversible capacity of 530 mAh g -1 at 0.1C, superior rate capability at high C rate operation (420 mAh g -1 at 5C), remarkable initial coulombic efficiency (>95.7%), and excellent cyclic stability along with high efficiency (>99.1%) during entire cycling. The NGL anode nanostructure enables improved lithium ion mobility and reversible Li + storage during cycling. The analysis of the Ragone plots revealed that the specific energy of NGL anode reaches to ca. 840 Wh kg -1 at the power density of 4200 W kg -1 . The diffusion coefficient of Li ions was measured as 1.69 × 10 -9 cm 2 s -1 for the NGL anode material, substantially improving over commonly used graphite electrodes (15–26 times higher Li + diffusivity). The high-rate cyclability as well as the cyclic stability of the NGL anodes were also confirmed via long-term cycling of full pouch cells assembled with ternary cathode and NGL anode. The robust design of the NGL anode materials introduced in this work, paves the way for designing next-generation lithium-ion batteries operating at ultra-high C rates.

25 ENERGY STORAGE↗

Kinetics and transport of hydrogen in graphite at high temperature and the effects of oxidation, irradiation and isotopics

The kinetics of uptake and desorption impact the performance of graphite as a vector for tritium in high-temperature fission reactors and in the blanket of fusion reactors. Graphite components in these reactors are exposed to temperatures > 500 °C and H 2 partial pressures of few Pa and desorption temperatures are limited to < 1600 °C; limited data is available at these conditions. Here we review the mechanisms for uptake in, transport and desorption of hydrogen from graphite at high temperature, compiling data on uptake rates, diffusion coefficients and activation energies and providing a discussion of the impact of irradiation, pre-oxidation and isotope. At FHR conditions, trapping impacts uptake rates, leading to a reduction in apparent diffusivity by 35 to 80% compared to higher partial-pressure uptake. Timelines for desorption are not clearly defined; extrapolating from available data, at 1150 °C desorbing 80% of tritium uptaken at FHR conditions may take from 100 to 10,000 h.

36 MATERIALS SCIENCE↗

Effect of Solvent on the Local Structure, Dynamics, and Vibrational Density of States in Sn-BEA Zeolite

Lewis acid zeolites are attractive catalysts for epoxidation and biomass valorization, as they are highly active and selective in the liquid phase and can operate at or near ambient conditions. While a rich experimental literature exists on liquid-phase Lewis acid zeolite catalysis, our understanding of the molecular organization and solvent dynamics in the vicinity of Lewis acid sites with differing metal site speciation remains limited. In this work, we investigate the molecular coordination and diffusion of two common solvents (methanol and water) around the closed and open Sn-BEA zeolite active sites using molecular dynamics simulations with a machine-learned interatomic potential trained on ab initio molecular dynamics trajectories. Molecular dynamics simulations reveal that introducing active sites significantly enhances local order in the first and second solvation shells compared to the pure silica case. For methanol, both closed and open active sites are singly coordinated, while more than two water molecules coordinate the open site. In contrast to methanol, we observed that water molecules dissociate, leading to the formation of additional Sn-OH and silanol groups away from the active site. The diffusion coefficients of water and methanol are functions of the solvent population in the pore. Here, our work provides insights into how active site speciation in Lewis acid zeolites affects solvent coordination, diffusion, and vibrational signature. This information is foundational for catalyst design and optimization of liquid-phase catalytic processes in zeolites. It also demonstrates the suitability of machine-learned interatomic potentials for modeling reactive systems, enabling sufficiently long trajectories for appropriate statistical averaging.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Carbon nanotube porin diffusion in mixed composition supported lipid bilayers

Carbon nanotube porins (CNTPs), short pieces of carbon nanotubes capable of self-inserting into a lipid bilayer, represent a simplified model of biological membrane channels. We have used high-speed atomic force microscopy (HS-AFM) and all-atom molecular dynamics (MD) simulations to study the behavior of CNTPs in a mixed lipid membrane consisting of DOPC lipid with a variable percentage of DMPC lipid added to it. HS-AFM data reveal that the CNTPs undergo diffusive motion in the bilayer plane. Motion trajectories extracted from the HS-AFM movies indicate that CNTPs exhibit diffusion coefficient values broadly similar to values reported for membrane proteins in supported lipid bilayers. The data also indicate that increasing the percentage of DMPC leads to a marked slowing of CNTP diffusion. MD simulations reveal a CNTP-lipid assembly that diffuses in the membrane and show trends that are consistent with the experimental observations.

77 NANOSCIENCE AND NANOTECHNOLOGY↗