Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Data search”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

COSMIC: Content-based Onboard Summarization to Monitor Infrequent Change

Interplanetary exploration occurs at vast distancesthat severely limit communication bandwidth to spacecraft exploringother planets. It is possible to collect much morescientific data than can ever be downlinked given current communicationcapabilities. Therefore, we are developing a systemcalled COSMIC (Content-based Onboard Summarization toMonitor Infrequent Change) that will opportunistically analyzedata onboard a Mars orbiter to alert scientists when meaningfulchanges have occurred. COSMIC will allow future spacecraftto continuously collect data to search for rare, transient phenomenasuch as fresh impacts or seasonally changing polarlandforms under a constrained downlink budget. In this paper,we describe the overall goals and architecture of COSMIC,plans to enable specific scientific studies, label acquisition toenable supervised approaches to surface landform classification,a new machine learning evaluation framework for analyzingthe trade-offs between classifier accuracy and computationalrequirements, and lessons learned about constraints that COSMICwill face operating onboard a spacecraft. In particular, wediscuss design considerations surrounding computational andstorage constraints, change detection strategies, and localizingdetected landforms of interest within a global coordinate frame.Finally, we describe challenges and open research questions thatmust be addressed prior to deploying COSMIC.

Trockman, Asher↗

Runway Configuration Management with Offline Reinforcement Learning

Runway configuration management (RCM) is a challenging task, and it affects the efficiency of the National Airspace System (NAS) and airport surface operations significantly. Each airport, depending on the geometry, capacity, local climate patterns, etc. has multiple configurations for the runway usage for arriving and departing flights. Many factors such as the incoming/outgoing traffic load, wind direction and speed, convective weather, cloud ceiling and other environmental factors might affect the choice of a runway configuration at any point in time. However, other factors such as safety measures and regulations, noise abatement, capacity of each configuration, and preference of the air traffic controllers (ATCs) can also play a significant role in selecting the configuration. A sub-optimal selection of the runway configuration, or delay in making configuration changes might result in significant increase in taxi times for aircraft on the surface of the airport, fuel and energy use of the aircraft, and maintenance costs. It can also lead to safety concerns, such as an aircraft performing one or more go-arounds before being able to land. All these factors make RCM an extremely important and challenging decision-making process for the ATCs. The current state of practice sets the runway configuration by the ATCs based on relevant information available at the time including weather, traffic, noise abatement, safety bounds, etc. This makes the decision-making process subjective based on the accuracy of the available information and the bias in human decision making. Unfortunately, this approach yields poor results (e.g., significant delays) if the predicted outcomes are uncertain and their relative impact is not well understood. This is especially evident when the uncertainty increases the size of possible predicted outcomes (combinatorial explosion in possible scenarios) that cannot be handled by human reasoning. On the other hand, an automated approach based on machine intelligence can make use of historical data and search through all (or significant amount of) possible scenarios under uncertainty and make well-informed decisions.

Milad Memarzadeh↗

Results of CUORE

The Cryogenic Underground Observatory for Rare Events (CUORE) at the Laboratori Nazionali del Gran Sasso, Italy, is the world's largest bolometric experiment. The detector consists of an array of 988 TeO 2 crystals, for a total mass of 742 kg. CUORE is presently in data taking, searching for the neutrinoless double beta decay of 130 Te. CUORE is operational since the spring of 2017. The initial science run already allowed to provide the most stringent limit on the neutrinoless double beta decay half-life of 130 Te, and to perform the most precise measurement of the two-neutrino double beta decay half-life. Up to date, we have more than doubled the collected exposure. In this talk, we presented the most recent results and discuss the present status of the CUORE experiment.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Evidence Against Correlations Between Nuclear Decay Rates and Earth-Sun Distance

We have reexamined our previously published data to search for evidence of correlations between the rates for the alpha, beta-minus, beta-plus, and electron-capture decays of {sup 22}Na, {sup 44}Ti, {sup 108}Ag{sup m}, {sup 121}Sn{sup m}, {sup 133}Ba, and {sup 241}Am and the Earth-Sun distance. We find no evidence for such correlations and set limits on the possible amplitudes of such correlations substantially smaller than those observed in previous experiments.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Evidence against correlations between nuclear decay rates and Earth-Sun distance

We have reexamined our previously published data to search for evidence of correlations between the rates for the alpha, beta-minus, beta-plus, and electron capture decays of 22Na, 44Ti, 108Agm, 121Snm, 133Ba, and 241Am and the Earth?Sun distance. We find no evidence for such correlations and set limits on the possible amplitudes of such correlations substantially smaller than those observed in previous experiments.

07 ISOTOPE AND RADIATION SOURCES↗

Search for Anomalous Production of Events with a Photon, Jet, b-quark Jet, and Missing Transverse Energy

We present a signature-based search for anomalous production of events containing a photon, two jets, of which at least one is identified as originating from a b quark, and missing transverse energy (/E{sub T}). The search uses data corresponding to 2.0 fb{sup -1} of integrated luminosity from p{bar p} collisions at a center-of-mass energy of {radical}s = 1.96 TeV, collected with the CDF II detector at the Fermilab Tevatron. From 6,697,466 events with a photon candidate with transverse energy ET > 25 GeV, we find 617 events with /E{sub T} > 25 GeV and two or more jets with E{sub T} > 15 GeV, at least one identified as originating from a b quark, versus an expectation of 607 {+-} 113 events. Increasing the requirement on /E{sub T} to 50 GeV, we find 28 events versus an expectation of 30 {+-} 11 events. We find no indications of non-standard-model phenomena.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Searches for New Physics at the Tevatron in Photon and Jet Final States

We present the results of searches for non-standard model phenomena in photon and jet final states. These searches use data from integrated luminosities of 0.7-2.7 fb{sup -1} of p{bar p} collisions at {radical}s = 1.96 TeV, collected with the CDF and D0 detectors at the Fermilab Tevatron. No significant excess in data has been observed. We report limits on the parameters of several models, including: large extra dimension, compositeness, leptoquarks, and supersymmetry.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Search for Standard Model Higgs Boson Production in Association with a W Boson using a Neural Network

We present a search for standard model Higgs boson production in association with a W boson in proton-antiproton collisions (p{bar p} {yields} W{sup {+-}}H {yields} {ell}{nu}b{bar b}) at a center of mass energy of 1.96 TeV. The search employs data collected with the CDF II detector that correspond to an integrated luminosity of approximately 1.9 fb{sup -1}. We select events consistent with a signature of a single charged lepton (e{sup {+-}}/{mu}{sup {+-}}), missing transverse energy, and two jets. Jets corresponding to bottom quarks are identified with a secondary vertex tagging method, a jet probability tagging method, and a neural network filter. We use kinematic information in an artificial neural network to improve discrimination between signal and background compared to previous analyses. The observed number of events and the neural network output distributions are consistent with the standard model background expectations, and we set 95% confidence level upper limits on the production cross section times branching fraction ranging from 1.2 to 1.1 pb or 7.5 to 102 times the standard model expectation for Higgs boson masses from 110 to 150 GeV/c{sup 2}, respectively.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Search for beyond standard model physics (non-SUSY) in final states with photons at the Tevatron

We present the results of searches for non-standard model phenomena in photon final states. These searches use data from integrated luminosities of {approx} 1-4 fb{sup -1} of p{bar p} collisions at {radical}s = 1.96 TeV, collected with the CDF and D0 detectors at the Fermilab Tevatron. No significant excess in data has been observed. We report limits on the parameters of several BSM models (excluding SUSY) for events containing photons.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Accelerated alloy discovery using synthetic data generation and data mining

The search for new alloys with improved properties is never ending with infinite combinations and amounts of alloying elements in the alloy. Advancements in machine learning have made navigating this enormous search space feasible. However, training the machine learning models and tuning their hyper-parameters to make accurate predictions can be time-consuming and often require high-performance computing resources. Furthermore, the quality of the predictions depend on the availability of sufficient training data. Here, we present a generic approach to accelerate alloy discovery by coupling high throughput CALPHAD calculations, synthetic data generation, and data mining. Finally, as a demonstration of the approach, we design super bainitic steels that form bainite at 200 C in lower transformation times.

36 MATERIALS SCIENCE↗

Searching for a cosmological preferred axis: Union2 data analysis and comparison with other probes

We review, compare and extend recent studies searching for evidence for a preferred cosmological axis. We start from the Union2 SnIa dataset and use the hemisphere comparison method to search for a preferred axis in the data. We find that the hemisphere of maximum accelerating expansion rate is in the direction (l,b) = (309°{sup +23°}{sub −3°},18°{sup +11°}{sub −10°}) (Ω{sub 0m} = 0.19) while the hemisphere of minimum acceleration is in the opposite direction (l,b) = (129°{sup +23°}{sub −3°},−18°{sup +10°}{sub −11°}) (Ω{sub 0m} = 0.30). The level of anisotropy is described by the normalized difference of the best fit values of Ω{sub 0m} between the two hemispheres in the context of ΛCDM fits. We find a maximum anisotropy level in the Union2 data of ΔΩ{sub 0mmax} / Ω{sub 0m} = 0.43±0.06. Such a level does not necessarily correspond to statistically significant anisotropy because it is reproduced by about 30% of simulated isotropic data mimicking the best fit Union2 dataset. However, when combined with the axes directions of other cosmological observations (bulk velocity flow axis, three axes of CMB low multipole moments and quasar optical polarization alignment axis), the statistical evidence for a cosmological anisotropy increases dramatically. We estimate the probability that the above independent six axes directions would be so close in the sky to be less than 1%. Thus either the relative coincidence of these six axes is a very large statistical fluctuation or there is an underlying physical or systematic reason that leads to their correlation.

79 ASTRONOMY AND ASTROPHYSICS↗

Search for 100 MeV to 10 GeV γ-ray lines in the Fermi-LAT data and implications for gravitino dark matter in the μνSSM

We present that dark matter decay or annihilation may produce monochromatic signals in the γ-ray energy range. In this work we argue that there are strong theoretical motivations for studying these signals in the framework of gravitino dark matter decay and we perform a search for γ-ray spectral lines from 100 MeV to 10 GeV with Fermi-LAT data. In contrast to previous line searches at higher energies, the sensitivity of the present search is dominated by systematic uncertainties across most of the energy range considered. We estimate the size of systematic effects by analysing the flux from a number of control regions, and include the systematic uncertainties consistently in our fitting procedure. We have not observed any significant signals and present model-independent limits on γ-ray line emission from decaying and annihilating dark matter. We apply the former limits to the case of the gravitino, a well-known dark matter candidate in supersymmetric scenarios. In particular, the R-parity violating ''μ from ν'' Supersymmetric Standard Model μνSSM) is an attractive scenario in which including right-handed neutrinos solves the μ problem of the Minimal Supersymmetric Standard Model while simultaneously explaining the origin of neutrino masses. At the same time, the violation of R-parity renders the gravitino unstable and subject to decay into a photon and a neutrino. Finally, as a consequence of the limits on line emission, μνSSM gravitinos with masses larger than about 5 GeV, or lifetimes smaller than about 1028 s, are excluded at 95% confidence level as dark matter candidates.

79 ASTRONOMY AND ASTROPHYSICS↗

Search for top-quark decays t → Hq with 36 fb ₋1 of pp collision data at $\sqrt{s}$= 13 TeV with the ATLAS detector

A search for flavour-changing neutral current decays of a top quark into an up-type quark ( q = u, c ) and the Standard Model Higgs boson, t → Hq , is introduced. The search is based on a dataset of pp collisions at $\sqrt{s}$= 13 TeV recorded in 2015 and 2016 with the ATLAS detector at the CERN Large Hadron Collider and corresponding to an integrated luminosity of 36.1 fb ₋1 . Two complementary analyses are performed to search for top-quark pair events in which one top quark decays into Wb and the other top quark decays into Hq, and target the H→$b\bar{b}$ and H → τ + τ ₋ decay modes, respectively. The high multiplicity of b-quark jets, or the presence of hadronically decaying τ-leptons, is exploited in the two analyses respectively. Multivariate techniques are used to separate the signal from the background, which is dominated by top-quark pair production. No significant excess of events above the background expectation is found, and 95% CL upper limits on the t → Hq branching ratios are derived. The combination of these searches with ATLAS searches in diphoton and multilepton final states yields observed (expected) 95% CL upper limits on the t → Hc and t → Hu branching ratios of 1.1 × 10 ₋3 (8.3 × 10 ₋4 ) and 1.2 × 10 ₋3 (8.3 × 10 ₋4 ), respectively. The corresponding combined observed (expected) upper limits on the |λ tcH | and |λ tuH | couplings are 0.064 (0.055) and 0.066 (0.055), respectively.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A search for flavour changing neutral currents in top-quark decays in pp collision data collected with the ATLAS detector at √s = 7 TeV

A search for flavour changing neutral current (FCNC) processes in top-quark decays by the ATLAS Collaboration is presented. Data collected from pp collisions at the LHC at a centre-of-mass energy of √s = 7 TeV during 2011, corresponding to an integrated luminosity of 2.1 fb⁻¹, were used. A search was performed for top-quark pair-production events, with one top quark decaying through the t → Zq FCNC (q = u, c) channel, and the other through the Standard Model dominant mode t → Wb. Only the decays of the Z boson to charged leptons and leptonic W-boson decays were considered as signal. Consequently, the final-state topology is characterised by the presence of three isolated charged leptons, at least two jets and missing transverse momentum from the undetected neutrino. No evidence for an FCNC signal was found. An upper limit on the t → Zq branching ratio of BR(t → Zq) < 0.73% is set at the 95% confidence level.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

New Data Source for Studying and Modelling the Topside Ionosphere

The existing uncertainties about density profiles in the topside ionosphere, i.e., in the height regime from hmF2 to approx. 2000 km, requires the search for new data sources. Millions of ionograms had been recorded by the ISIS and Alouette satellites in the sixties and seventies, that never were analyzed in terms of electron density profiles. In recent years an effort started to digitize the analog recordings to prepare the ionograms for computerized analysis. This paper shows how the digital ionograms are processed and the electron density profiles (from satellite orbit altitude, 1400 km for ISIS-2, down to the F peak) are calculated. The most difficult part of the task is the automatic scaling of the echo traces in the ISIS ionograms. Unlike the ionograms from modern ionosondes, the ISIS ionograms do not identify the wave polarization of the different echo traces, so physical logic must be applied to identify the ordinary ()) and extraordinary (X) traces, and this is not always successful. Characteristic resonance features seen in the topside ionograms occur at the gyro and plasma frequencies. An elaborate scheme was developed to identify these resonance frequencies in order to determine the local plasma and gyrofrequencies. This information helps in the identification of the O and X traces, and it provides the starting density of the electron density profile. The inversion of the echo traces into electron density profiles uses the same modified Chebyshev polynomial fitting technique that is successfully applied in the ground-based Digisonde network. The automatic topside ionogram scaler with true height algorithm TOPIST is successfully scaling approx. 70% of the ionograms. An 'editing process' is available to manually scale the more difficult ionograms. The home page for the ISIS project is at http://nssdc.gsfc.nasa.gov/space/isis/isis-status.html. It provides access to as of January 2001, 3000,000 digitized ISIS ionogram data and to related software. A search page lets users select data location, time, and a host of other search criteria. The automated processing of the ISIS ionograms will begin later this year and the electron density profiles will be made available from the project home page. The ISIS data restoration efforts are supported through NASA's Applied Systems and Information Research Program.

Huang, Xue-Qin↗

Big Data as a Service from an Urban Information System

Big Data has already proven itself as a valuable tool that lets geographers and urban researchers utilize large data re- sources to generate new insights. However, wider adoption of Big Data techniques in these areas is impeded by a number of difficulties in both knowledge discovery and data and sci- ence production. Typically users face such problems as dis- parate and scattered data, data management, spatial search- ing, insufficient computational capacity for data-driven anal- ysis and modelling, and the lack of tools to quickly visual- ize and summarize large data and analysis results. Here we propose an architecture for an Urban Information Sys- tem (UrbIS) that mitigates these problems by utilizing the Big Data as a Service (BDaaS) concept. With technolog- ical roots in High-performance Computing (HPC), BDaaS is based on the idea of outsourcing computations to dif- ferent computing paradigms, scalable to super-computers. UrbIS aims to incorporate federated metadata search, in- tegrated modeling and analysis, and geovisualization into a single seamless workflow. The system is under active devel- opment and is built around various emerging technologies that include hybrid and NoSQL databases, massively par- allel systems, GPGPU computing, and WebGL-based geo- graphic visualization. UrbIS is designed to facilitate using Big Data across multiple cities to better understand how ur- ban areas impact the environment and how climate change and other environmental change impact urban areas.

Sorokine, Alexandre↗

The Use of Weighting in Periodicity Searches in All-Sky Monitor Data: Applications to the GLAST LAT

The light curves produced by all-sky monitors, such as the Rossi X-ray Timing Explorer All-Sky Monitor and the Swift Burst Alert Telescope (BAT), generally have non-uniform error bars. In searching for periodic modulation in this type of data using power spectra it can be important to use appropriate weighting of data points to achieve the best sensitivity. It was recently demonstrated that for Swift BAT data a simple weighting scheme can actually sometimes reduce the sensitivity of the power spectrum depending on source brightness. Instead, a modified weighting scheme, based on the Cochran semi-weighted mean, gives improved results independent of source brightness. We investigate the benefits of weighting power spectra in period searches using simulated GLAST LAT observations of {gamma}-ray binaries.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗