Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DSC”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Hydrothermal synthesis and luminescence properties of octahedral LiYbF{sub 4}: Er{sup 3+} microcrystals

Graphical abstract: LiYbF{sub 4}: Er{sup 3+} octahedral microcrystals have been successfully prepared through a facile hydrothermal method assisted with EDTA. SEM, HRTEM, RD, PL spectra are used to characterize the samples. It can be seen from SEM data that the complexing agent EDTA made to hydrothermal synthetic procedures result in formation of LiYbF{sub 4} octahedral microparticles with smooth surface. From the HRTEM images, the distances between the lattice fringes were measured to be 2.99 A and 2.57 A which correspond to the d-spacing for (1 1 2) and (2 0 0) planes, respectively. From the XRD patterns for the LiYb{sub 0.99}Er{sub 0.01}F{sub 4} in the absence of chelating agent EDTA and in the presence of EDTA, it is evident that the diffraction peaks of both patterns are highly crystalline and all of the peaks could be readily indexed to the LiYbF{sub 4} phase (JCPDS 71-1211). No other impurity peaks were detected. Under 976 nm excitation, the upconversion (UC) luminescence emission spectra of LiYbF{sub 4}: Er{sup 3+} microcrystals show the characteristic Er{sup 3+} emissions. The results show that the infrared light emissions at 792 nm of {sup 4}I{sub 9/2} {yields} {sup 4}I{sub 15/2} are dominantly strong unusually, while the green emissions at 526 and 545 nm assigned to {sup 2}H{sub 11/2} {yields} {sup 4}I{sub 15/2} and {sup 4}S{sub 3/2} {yields} {sup 4}I{sub 15/2}, respectively, and the red emission at 667 nm of {sup 4}F{sub 9/2} {yields} {sup 4}I{sub 15/2} are relatively weaker. Research highlights: {yields} Monodisperse and regular octahedral microcrystals LiYbF{sub 4}: Er{sup 3+} with smooth surface has been prepared. {yields} The characteristic emissions of Er{sup 3+} ions are observed in LiYbF{sub 4} microcrystals. {yields} The content of EDTA will influence the fluorescence intensity. {yields} Luminescence intensity increases gradually at the beginning and then decreases gradually with increasing temperature. -- Abstract: LiYbF{sub 4}: Er{sup 3+} octahedral microcrystals have been successfully prepared through a facile hydrothermal method assisted with EDTA (ethylenediaminetetraacetic acid). X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), Fourier transform infrared spectroscopy (FTIR), thermogravimetric and differential scanning calorimeters (TG-DSC), photoluminescence (PL) spectra are used to characterize the samples. Under 976 nm excitation, the upconversion (UC) luminescence emission spectra of LiYbF{sub 4}: Er{sup 3+} microcrystals show the characteristic Er{sup 3+} emissions. The results show that the infrared light emissions at 792 nm of {sup 4}I{sub 9/2} {yields} {sup 4}I{sub 15/2} are dominantly strong unusually, while the green emissions at 526 and 545 nm assigned to {sup 2}H{sub 11/2} {yields} {sup 4}I{sub 15/2} and {sup 4}S{sub 3/2} {yields} {sup 4}I{sub 15/2}, respectively, and the red emission at 667 nm of {sup 4}F{sub 9/2}{yields}{sup 4}I{sub 15/2} are relatively weaker. Most importantly, the samples show more efficient luminescence with further heat treatment.

36 MATERIALS SCIENCE↗

Synthesis and properties of new CdSe-AgI-As{sub 2}Se{sub 3} chalcogenide glasses

Research highlights: {yields} Determination of the glass-forming region in the pseudo-ternary CdSe-AgI-As{sub 2}Se{sub 3} system. {yields} Characterization of macroscopic properties of the new CdSe-AgI-As{sub 2}Se{sub 3} glasses. {yields} Far infrared transmission of chalcogenide glasses. {yields} Characterization of the total conductivity of CdSe-AgI-As{sub 2}Se{sub 3} glasses. -- Abstract: The glass-forming region in the pseudo-ternary CdSe-AgI-As{sub 2}Se{sub 3} system was determined. Measurements including differential scanning calorimetry (DSC), density, and X-ray diffraction were performed. The effect resulting from the addition of CdSe or AgI has been highlighted by examining three series of different base glasses. The characteristic temperatures of the glass samples, including glass transition (T{sub g}), crystallisation (T{sub x}), and melting (T{sub m}) temperatures are reported and used to calculate their {Delta}T = T{sub x} - T{sub g} and their Hruby, H{sub r} = (T{sub x} - T{sub g})/(T{sub m} - T{sub x}), criteria. Evolution of the total electrical conductivity {sigma} and the room temperature conductivity {sigma}{sub 298} was also studied. The terahertz transparency domain in the 50-600 cm{sup -1} region was pointed for different chalcogenide glasses (ChGs) and the potential of the THz spectroscopy was suggested to obtain structural information on ChGs.

36 MATERIALS SCIENCE↗

Structural, thermal and dielectric studies on the novel solution grown (4-dimethylaminopyridinium) chloroantimonate(III) and chlorobismuthate(III) crystals

Research Highlights: {yields} The one-dimensional (1D) and the zero-dimensional (0D) anionic structure. {yields} The 'crystal bending' discovered in RMX{sub 4}-type analogue. {yields} The low frequency relaxation processes attributed to the dynamics of the organic cations. -- Abstract: The single crystals of the following 4-dimethylaminopyridinium chloroantimonates(III) and chlorobismuthates(III) have been grown by the solvent evaporation method: (C{sub 7}H{sub 11}N{sub 2})SbCl{sub 4}, (C{sub 7}H{sub 11}N{sub 2})BiCl{sub 4} and (C{sub 7}H{sub 11}N{sub 2}){sub 4}Bi{sub 2}Cl{sub 10}. The one-dimensional (1D) structures for (C{sub 7}H{sub 11}N{sub 2})SbCl{sub 4} or (C{sub 7}H{sub 11}N{sub 2})BiCl{sub 4} and the zero-dimensional (0D) one for (C{sub 7}H{sub 11}N{sub 2}){sub 4}Bi{sub 2}Cl{sub 10} have been solved by the single-crystal X-ray diffraction method. (C{sub 7}H{sub 11}N{sub 2})SbCl{sub 4} and (C{sub 7}H{sub 11}N{sub 2})BiCl{sub 4} appeared to be isomorphous and crystallize in the monoclinic space group, C2/c, whereas (C{sub 7}H{sub 11}N{sub 2}){sub 4}Bi{sub 2}Cl{sub 10} in the orthorhombic one, Imma. The molecular arrangements in the subsequent crystal lattices have been studied. For all three compounds by using the differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) no structural phase transition has been detected in temperature region between 100 and 400 K. Nevertheless, the dielectric relaxation processes in temperature region 100-450 K and frequency range between 100 Hz and 2 MHz have been found in all crystals studied. The experimental results of the real and imaginary parts of the dielectric permittivity allow us to estimate the parameters of the relaxation processes, i.e. macroscopic relaxation times, {tau}, and activation energies, E{sub A}. The dynamics of the dipolar organic cations is expected to contribute to the relaxations process in the crystals under investigation.

36 MATERIALS SCIENCE↗

Sonochemical synthesis of (3-aminopropyl)triethoxysilane-modified monodispersed silica nanoparticles for protein immobilization

Graphical abstract: 3-Aminopropyltriethoxysilane modified monodispersed silica nanoparticles were synthesized by rapid sonochemical co-condensation to achieve high capability for protein immobilization. Highlights: {yields} Amino-modified monodispersed silica nanoparticles were synthesized by rapid co-condensation. {yields} Strong positive charge was created by aminopropyl-modification. {yields} Capability for immobilization of negatively charged protein was enhanced. {yields} Electrostatic interaction between proteins and surface contributed to the enhanced adsorption. -- Abstract: 3-Aminopropyltriethoxysilane modified monodispersed silica nanoparticles were synthesized by a rapid sonochemical co-condensation synthesis procedure. The chemical nature of surface organic modifier on the obtained modified silica nanoparticle was characterized by {sup 13}C and {sup 29}Si MAS Nuclear Magnetic Resonance (NMR) spectroscopies, Fourier-transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA)- differential scanning calorimetry (DSC). Due to the strengthened positive surface charge of the silica nanoparticles by the modification with aminopropyl groups, the capability for bovine serum albumin (BSA) adsorption was significantly increased as compared with bare silica nanoparticles. 80 mg/g BSA was adsorbed on modified silica nanoparticles, whereas only 20 mg/g BSA could be loaded on pure silica nanoparticles. The enhanced positive surface charge repelled proteins with net positive charge and the modified silica nanoparticles exhibited negligible adsorption of lysozyme, thus a selective adsorption of proteins could be achieved.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and thermal stability of W-doped VO{sub 2} nanocrystals

Highlights: {yields} The VO{sub 2} nanocrystals with a nearly spherical morphology with size ranging from 50 to 100 nm were synthesized by using V{sub 2}O{sub 5} and oxalic acid as precursors via a thermolysis method. {yields} The W dopant is in the W{sup 6+} form, and there is a small amount of V{sup 3+} in the VO{sub 2} nanocrystals. VO{sub 2} (R) nanocrystals with phase transition temperature at room temperature were obtained with 2.5 at% W-doing. {yields} A high stability upon heating-cooling cycles was observed with respect to MIT temperature, peak temperature and latent heat of the phase transition due to both the size effect and the existence of V{sup 3+} in the VO{sub 2} nanocrystals. -- Abstract: Pure and W-doped vanadium dioxide nanocrystals have been synthesized by using V{sub 2}O{sub 5} and oxalic acid as precursors via a thermolysis method. The VO{sub 2} nanocrystals have a nearly spherical morphology with size ranging from 50 to 100 nm. The metal-insulator transition (MIT) temperature of the nanocrystals decreases with increasing W-doping content. The successive heat-induced fatigue character of the MIT in W-doped VO{sub 2} nanocrystals was investigated by DSC analysis together with structural study, and a high stability upon heating-cooling cycles was found with respect to MIT temperature, peak temperature and latent heat of the phase transition.

36 MATERIALS SCIENCE↗

Structure, morphology and ionic conductivity of solid polymer electrolyte

Graphical abstract: Two-dimensional atomic force image of pure polyethylene oxide presents a crystallized network of regular spherulites developing spirals and branches of well distributed surface contours. Highlights: {yields} The incorporation of ceria significantly modifies the morphology of polyethylene oxide (PEO)-KI complex. {yields} The ionic conductivity increases by about two orders of magnitude by the addition of ceria nanoparticles. {yields} Ionic conductivity as a function of ceria concentration reveals two maxima. {yields} Grain boundary effect of nanofiller, strong Lewis acid-base interaction between PEO and nanosized ceria, change of conformation of PEO molecule and epitaxial effect of ceria nanoparticles control the ionic conductivity of composite polymer electrolyte. -- Abstract: Polyethylene oxide (PEO) complexed with potassium iodide (KI) is synthesized to investigate the ionic conductivity of alkaline based polymer electrolytes. The structural and morphological characterizations of the nanocomposite polymer electrolytes are performed by X-ray diffractometry (XRD), atomic force microscopy (AFM), differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FTIR) measurements. The ionic conductivity increases with the increase of KI concentration up to about 20 wt.%. The effect of nanosized ceria (CeO{sub 2} {approx} 10 nm) fillers on ionic conductivity in PEO-KI polymer electrolyte is also carried out, keeping PEO to KI wt.% ratio 80:20 and 85:15. The result reveals that the addition of ceria nanoparticles enhances the conductivity by two orders of magnitude. The presence of ceria at the highest concentration induces the same molecular environment within PEO chain as that of undoped PEO. Temperature dependence of ionic conductivity follows Arrhenius mechanism.

36 MATERIALS SCIENCE↗

Preparation and mechanical properties of silicon oxycarbide fibers from electrospinning/sol-gel process

Graphical abstract: Ceramic fibers, silicon oxycarbide (SiOC) fibers were demonstrated and showed higher mechanical properties from electrospinning/sol-gel process at 1000 Degree-Sign C. Highlights: Black-Right-Pointing-Pointer SiOC fibers with low cost are promising to substitute the non-oxide fibers. Black-Right-Pointing-Pointer Successful preparation of SiOC fibers by electrospinning/sol-gel process. Black-Right-Pointing-Pointer Confirmation of the designed product using material characterization methods. Black-Right-Pointing-Pointer The SiOC fibers prepared at 1000 Degree-Sign C possess higher strength (967 MPa). -- Abstract: Silicon oxycarbide (SiOC) fibers were produced through the electrospinning of the solution containing vinyltrimethoxysilane and tetraethoxysilane in the course of sol-gel reaction with pyrolysis to ceramic. The effect of the amount of spinning agent Polyvinylpyrrolidone (PVP) on the dope spinnability was investigated. At a mass ratio of PVP/alkoxides = 0.05, the spinning sol exhibited an optimal spinnable time of 50 min and generated a large quantity of fibers. Electrospun fibers were characterized by Fourier transform infrared spectroscopy (FTIR), thermo gravimetric analysis-differential scanning calorimetry (TGA-DSC), scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). The SEM results revealed that the SiOC fibers had a smooth surface and dense cross-section, free of residue pores and cracks. The XPS results gave high content of SiC (13.99%) in SiOC fibers. The SiOC fibers prepared at 1000 Degree-Sign C had a high tensile strength of 967 MPa and Young's modulus of 58 GPa.

36 MATERIALS SCIENCE↗

3D hierarchical Zn{sub 3}(OH){sub 2}V{sub 2}O{sub 7}{center_dot}2H{sub 2}O and Zn{sub 3}(VO{sub 4}){sub 2} microspheres: Synthesis, characterization and photoluminescence

Highlights: Black-Right-Pointing-Pointer 3D hierarchical microspheres of Zn{sub 3}(OH){sub 2}V{sub 2}O{sub 7}{center_dot}2H{sub 2}O were gained with glycine-assisted hydrothermal method. Black-Right-Pointing-Pointer Zn{sub 3}(OH){sub 2}V{sub 2}O{sub 7}{center_dot}2H{sub 2}O can be transformed into Zn{sub 3}(VO{sub 4}){sub 2} with the similar morphologies by calcination. Black-Right-Pointing-Pointer The PL properties of Zn{sub 3}(OH){sub 2}V{sub 2}O{sub 7}{center_dot}2H{sub 2}O and Zn{sub 3}(VO{sub 4}){sub 2} were studied. -- Abstract: Via a simple glycine-assisted hydrothermal route, large-scale 3D hierarchical Zn{sub 3}(OH){sub 2}V{sub 2}O{sub 7}{center_dot}2H{sub 2}O microspheres have been fabricated. Their purity, crystalline phase, morphologies and thermal stability were characterized by X-ray diffraction (XRD), X-ray photoelectron spectra (XPS), Fourier transform IR (FTIR), scanning electron microscopy (SEM) and thermogravimetry-differential scanning calorimetry (TG-DSC). The SEM results indicate that the microspheres are self-assembled by numerous nanoflakes with mean thickness of 100 nm. Some factors influencing the morphologies of the Zn{sub 3}(OH){sub 2}V{sub 2}O{sub 7}{center_dot}2H{sub 2}O micro-/nanostructures have been systematically investigated, as well as quantity of glycine and the reaction time. The possible mechanism of the crystal growth and assembled procedure were also proposed. The as-prepared Zn{sub 3}(OH){sub 2}V{sub 2}O{sub 7}{center_dot}2H{sub 2}O can be transformed into Zn{sub 3}(VO{sub 4}){sub 2} with the similar morphologies by calcination in air at 600 Degree-Sign C. Furthermore, the photoluminescent properties of both Zn{sub 3}(OH){sub 2}V{sub 2}O{sub 7}{center_dot}2H{sub 2}O and Zn{sub 3}(VO{sub 4}){sub 2} were studied and exhibited different spectra.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Study on preparation and luminescent properties of Eu{sup 3+}-doped LaAlO{sub 3} and GdAlO{sub 3}

Graphical abstract: The optical property of Eu{sup 3+} ions is seriously influenced by the two kinds of host materials of LaAlO{sub 3} and GdAlO{sub 3}, especially the charge transfer (CT) band energy of Eu{sup 3+}-O{sup 2-}. We have discussed it in detail based on experiments and quantitative calculations. Highlights: Black-Right-Pointing-Pointer Ln{sub 1-x}AlO{sub 3}:Eu{sub x}{sup 3+} (Ln = La, Gd) phosphors were prepared by sol-gel method. Black-Right-Pointing-Pointer The optical properties of Ln{sub 1-x}AlO{sub 3}:Eu{sub x}{sup 3+} (Ln = La, Gd) phosphors have been investigated in detail. Black-Right-Pointing-Pointer We quantitatively calculated the bond lengths and bond covalency of Gd-O and La-O bonds. Black-Right-Pointing-Pointer The calculated charge transfer energies of Eu{sup 3+}-doped LnAlO{sub 3} (Ln = La, Gd) are in good agreement with our experimental results. -- Abstract: Eu{sup 3+}-doped trigonal LaAlO{sub 3} and orthorhombic GdAlO{sub 3} phosphors have been successfully synthesized by sol-gel method. The crystallization processes of the phosphors have been characterized by X-ray diffraction (XRD) and thermogravimetry-differential scanning calorimetry (TG-DSC). The optical properties of these phosphors were investigated using the photoluminescence (PL) and photoluminescence excitation (PLE) spectra. The influences of the different structures and bonding of the hosts on the luminescence performance of Eu{sup 3+} ion-doped LaAlO{sub 3} and GdAlO{sub 3} were investigated in detail based on chemical bond theory. Under appropriate UV-radiation, the reddish orange light emitted from GdAlO{sub 3}:Eu{sup 3+} was brighter than that from LaAlO{sub 3}:Eu{sup 3+}. Such a brightly luminescent phosphor could be considered as an ideal optical material for the development of new optical display systems.

36 MATERIALS SCIENCE↗

Solvothermal synthesis of monodispersed CoZr{sub 4}(PO{sub 4}){sub 6} microspheres and their application as microwave absorber

Graphical abstract: Monodispersed CoZr{sub 4}(PO{sub 4}){sub 6} porous microspheres with shell structure were synthesized via a combined solvothermal method and calcination route. The radar-wave absorbability of the purple sample calcined at 900 Degree-Sign C was strongest at the frequency of about 8.5 GHz. Highlights: Black-Right-Pointing-Pointer In this study we synthesized monodispersed CoZr{sub 4}(PO{sub 4}){sub 6} porous microspheres as microwave absorber. Black-Right-Pointing-Pointer The relationship between microstructures and the electromagnetic properties was indicated. Black-Right-Pointing-Pointer The radar-wave absorbability of the sample was included. -- Abstract: Monodispersed CoZr{sub 4}(PO{sub 4}){sub 6} microspheres with a diameter of 40 {mu}m were achieved via a combining solvothermal and calcination route. The crystallinity of the calcined microspheres with shell structure was improved, while the monodisperse property and morphologies remained. The possible formation mechanism of the porous CoZr{sub 4}(PO{sub 4}){sub 6} microspheres with nanoshell was proposed. The samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectra (FT-IR) technologies, thermal analysis (TG and DSC), nitrogen adsorption-desorption isotherms and network analyzer. The sample calcined at 900 Degree-Sign C shows a strongest absorbability in the radar-wave absorbability test.

36 MATERIALS SCIENCE↗

Synthesis and characterization of a new organic sulphate, [2,3-(CH{sub 3}){sub 2}C{sub 6}H{sub 3}NH{sub 3}]HSO{sub 4}·H{sub 2}O

Highlights: ► The packing of this hybrid compound shows strong and moderate non-centrosymmetrical structure. ► In all the studied temperature range, this conductivity increases with the temperature showing that this material has semi-conductor behaviour. ► The reported crystal could be an optically non-linear material. A study of this activity could open to it opportunities on applied plan. -- Abstract: Crystals of a new hybrid compound C{sub 8}H{sub 12}N{sup +}, HSO{sub 4}{sup −}·H{sub 2}O were synthesized in aqueous solution and characterized by X-ray diffraction and IR absorption spectroscopy. This compound crystallizes in the orthorhombic non-centrosymmetrical space group P2{sub 1}2{sub 1}2{sub 1} and an unit cell with a = 5.74(2) Å, b = 9.17(2) Å, c = 21.34(4) Å, V = 1124(6) Å{sup 3}, and Z = 4. Its crystal structure is a packing of alternated inorganic and organic layers parallel to (a,b) planes. The different components are connected by a bi-dimensional network of strong O-H…O and N-H…O hydrogen bonds. Then, in order to detect phase transitions and watch changes in the conductivity behaviour, investigations by DTA–TG and differential scanning calorimetry (DSC) and electrical conductivity measurements were carried out.

36 MATERIALS SCIENCE↗

Facile synthesis, phase transition, optical switching and oxidation resistance properties of belt-like VO{sub 2}(A) and VO{sub 2}(M) with a rectangular cross section

Highlights: ► Belt-like VO{sub 2}(A) with a rectangular cross section was synthesized. ► The formation mechanism of belt-like VO{sub 2}(A) was proposed. ► Belt-like VO{sub 2}(M) was prepared by the irreversible transformation of VO{sub 2}(A). ► VO{sub 2}(A) and VO{sub 2}(M) can be used as the optical switching materials. ► VO{sub 2}(A) and VO{sub 2}(M) have good oxidation resistance below 400 °C in air. -- Abstract: Belt-like VO{sub 2}(A) with a rectangular cross section (VA-RCS) was successfully synthesized using V{sub 2}O{sub 5}, H{sub 2}C{sub 2}O{sub 4}·2H{sub 2}O and H{sub 2}O as the starting materials by a facile hydrothermal approach. Some synthetic parameters, such as, the reaction time, reaction temperature and concentration of H{sub 2}C{sub 2}O{sub 4}·2H{sub 2}O, were systematically investigated to control the fabrication of belt-like VA-RCS. The formation mechanism of belt-like VA-RCS was proposed. Subsequently, belt-like VO{sub 2}(M) with a rectangular cross section (VM-RCS) was prepared by the irreversible transformation of VA-RCS at 700 °C for 2 h under the inert atmosphere. The phase transition temperature (T{sub c}) of VA-RCS and VM-RCS was evaluated by DSC test. The optical switching properties of VA-RCS and VM-RCS were studied by the variable-temperature infrared spectra, and it was found that the as-obtained VA-RCS and VM-RCS could be used as the optical switching materials. Furthermore, the oxidation resistance properties of VA-RCS and VM-RCS were investigated by TGA, indicating that they have good thermal stability and oxidation resistance below 400 °C in air.

36 MATERIALS SCIENCE↗

Martensitic transformation behaviors of rapidly solidified Ti–Ni–Mo powders

For the fabrication of bulk near-net-shape shape memory alloys and porous metallic biomaterials, consolidation of Ti–Ni–Mo alloy powders is more useful than that of elemental powders of Ti, Ni and Mo. Ti{sub 50}Ni{sub 49.9}Mo{sub 0.1} shape memory alloy powders were prepared by gas atomization, and transformation temperatures and microstructures of those powders were investigated as a function of powder size. XRD analysis showed that the B2–R–B19 martensitic transformation occurred in powders smaller than 150 μm. According to DSC analysis of the as-atomized powders, the B2–R transformation temperature (T{sub R}) of the 25–50 μm powders was 18.4 °C. The T{sub R} decreased with increasing powder size, however, the difference in T{sub R} between 25–50 μm powders and 100–150 μm powders is only 1 °C. Evaluation of powder microstructures was based on SEM examination of the surface and the polished and etched powder cross sections and the typical images of the rapidly solidified powders showed cellular morphology. Porous cylindrical foams of 10 mm diameter and 1.5 mm length were fabricated by spark plasma sintering (SPS) at 800 °C and 5 MPa. Finally these porous TiNi alloy samples are heat-treated for 1 h at 850 °C, and then quenched in ice water. The bulk samples have 23% porosity and 4.6 g/cm{sup 3} density and their T{sub R} is 17.8 °C.

36 MATERIALS SCIENCE↗

Nitrogen-doped graphene as transparent counter electrode for efficient dye-sensitized solar cells

Graphical abstract: Display Omitted Highlights: ► NG sheets are prepared through a hydrothermal reduction of graphite oxide. ► The transparent NG counter electrodes of DSCs are fabricated at room temperature. ► Transparent NG electrode exhibits excellent catalytic activity for the reduction of I{sub 3}{sup −}. ► The DSC with NG electrode achieves a comparable efficiency to that of the Pt-based cell. ► The efficiency of rear illumination is about 85% that of front illumination. -- Abstract: Nitrogen-doped graphene sheets are prepared through a hydrothermal reduction of graphite oxide in the presence of ammonia and applied to fabricate the transparent counter electrode of dye-sensitized solar cells. The atomic percentage of nitrogen in doped graphene sample is about 2.5%, and the nitrogen bonds display pyridine and pyrrole-like configurations. Cyclic voltammetry studies demonstrate a much higher electrocatalytic activity toward I{sup −}/I{sub 3}{sup −} redox reaction for nitrogen-doped graphene, as compared with pristine graphene. The dye-sensitized solar cell with this transparent nitrogen-doped graphene counter electrode shows conversion efficiencies of 6.12% and 5.23% corresponding to front-side and rear-side illumination, respectively. Meanwhile, the cell with a Pt counter electrode shows a conversion efficiency of 6.97% under the same experimental condition. These promising results highlight the potential application of nitrogen-doped graphene in cost-effective, transparent dye-sensitized solar cells.

36 MATERIALS SCIENCE↗

Dual phase polymer gel electrolyte based on non-woven poly(vinylidenefluoride-co-hexafluoropropylene)–layered clay nanocomposite fibrous membranes for lithium ion batteries

Graphical abstract: Display Omitted Highlights: ► P(VdF-co-HFP)–clay nanocomposite based electrospun membranes are prepared. ► The membranes are used as polymer gel electrolyte (PGE) in lithium ion batteries. ► The composite PGE shows ionic conductivity of 5.5 mS cm{sup −1} at room temperature. ► Li/PGE/LiFePO{sub 4} cell delivers initial discharge capacity of 160 mAh g{sup −1}. ► The use of prepared electrolyte significantly improved the cell performance. -- Abstract: A new approach for fabricating polymer gel electrolytes (PGEs) based on electrospun poly(vinylidenefluoride-co-hexafluoropropylene) (P(VdF-co-HFP)) incorporated with layered nanoclay has been employed to enhance the ionic conductivity and electrochemical properties of P(VdF-co-HFP) without compromising its mechanical strength. The effect of layered nanoclay on properties of membranes has been evaluated by X-ray diffraction (XRD), differential scanning calorimetry (DSC) and thermal gravimetric analysis (TGA). Surface morphology of the membranes has been studied using field-emission scanning electron microscopy (FE-SEM). Polymer gel electrolytes are prepared by soaking the fibrous membrane into 1 M LiPF{sub 6} in EC/DEC. The electrochemical studies show that incorporation of layered nanoclay into the polymer matrix greatly enhanced the ionic conductivity and compatibility with lithium electrodes. The charge–discharge properties and cycling performance of Li/LiFePO{sub 4} cells comprising nanocomposite polymer gel electrolytes have been evaluated at room temperature.

36 MATERIALS SCIENCE↗

Effect of n-HA content on the isothermal crystallization, morphology and mechanical property of n-HA/PLGA composites

Graphical abstract: Effect of n-HA content on the isothermal crystallization, morphology and mechanical property of n-HA/PLGA composites was studied in details. The results showed that the addition of higher content of g-n-HA was favorable to promote the crystallization better in g-n-HA/PLGA composites, but it could also cause more agglomeration in PLGA matrix, as a result of worse mechanical properties, and the addition content of 3 wt% g-n-HA to PLGA matrix was an appropriate proportion, which had the highest bending strength among these g-n-HA/PLGA composites, and it might be potential to be used in biomedical fields in future. Highlights: ► The effect of n-HA content on the n-HA/PLGA composites was studied in detail. ► Isothermal crystallization, microstructure and mechanical property were studied. ► The relation between n-HA content and properties of n-HA/PLGA composite was found. ► An appropriate proportion of n-HA in n-HA/PLGA composite was obtained. - Abstract: A serials of g-n-HA/PLGA composites with surface-modified g-n-HA of 1%, 3%, 6%, 10% and 15% in weight were prepared by solution mixing. The isothermal crystallization, morphology and mechanical property of g-n-HA/PLGA composites were investigated by differential scanning calorimeter (DSC), scanning electron microscope (SEM) and electromechanical universal tester. The results showed that Avrami equation was suitable for describing the isothermal crystallization process in this system, and the crystallization rate of g-n-HA/PLGA composites containing more than 3 wt% g-n-HA was basically accord with the relational expression of T{sub 110} {sub °C} > T{sub 105°C} > T{sub 115°C} > T{sub 120°C}. Moreover, at the same Tc, crystallization rate was greatly enhanced with the increasing of g-n-HA acting as nucleate. However, the addition of higher content of g-n-HA would cause more agglomeration in PLGA matrix, so that the mechanical properties of g-n-HA/PLGA composites would gradually decrease. In conclusion, the addition of higher content of g-n-HA was favorable to promote the crystallization better in g-n-HA/PLGA composites, but it could also cause more agglomeration in PLGA matrix, result in worse mechanical properties, and the addition content of 3 wt% g-n-HA to PLGA matrix was an appropriate proportion, which had the highest bending strength among these g-n-HA/PLGA composites, and it might be potential to be used in biomedical fields in future.

36 MATERIALS SCIENCE↗

Inducing multiple functionalities in ZnS nanoparticles by doping Ni{sup +2} ions

Graphical abstract: Figure shows spherical ZnS nanoparticle (light red) containing Ni as dopant ions (light green inside) exhibiting both optical (straight lines) as well as magnetic (elliptical field lines) activities simultaneously. Highlights: ► A simple method has been adopted to synthesize Ni{sup +2} doped ZnS nanoparticles. ► The enhancing and quenching of the PL intensity depended upon ‘purity of the phase’. ► The change in packing of the molecules in ZnS NPs directly depended on concentration of dopant. ► Magnetic and optical properties were found to be dopant dependent (e.g. Ni{sup +2} ions). ► Proper choice of solvent for synthesis shows a marked effect on magnetism. - Abstract: In this study, we propose that it is possible to induce multiple functionalities such as optical activity, electrical conductance and magnetism in single ZnS/Ni nanoparticles and exploit the same by only changing the external stimuli such as magnetic field, wavelength of light, electric field etc. Such type of material finds great significance in the field of electronics as well as in bioimaging. For the purpose, we have synthesized cubic ZnS:Ni{sup 2+} nanoparticles (NPs) using a simple wet-chemical method. Synthesized ZnS:Ni{sup 2+} NPs had been characterized by X-ray diffraction pattern (XRD) and energy dispersive X-ray (EDX) analysis. The amounts of Ni and Zn in the material were determined by inductively coupled plasma-atomic emission spectroscopy (ICP-AES). Morphology of the NPs is studied by transmission electron microscopy (TEM). Optical studies are carried out using UV–visible (UV–Vis) and Photoluminescence (PL) spectroscopies. Quantum efficiency of the material was also computed. The enhancement and quenching of the PL intensity are correlated with the ‘purity of the phase’. It is observed that change in packing of the molecules of the host material directly depended on concentration of dopant ion. The thermal study of the material was carried out using differential scanning calorimetry (DSC) to support the earlier proposition. Magnetic hysteresis behavior was studied using vibrating sample magnetometer (VSM). An interesting phenomenon of defect-induced magnetism was observed, which was enhanced on doping with Ni{sup +2}.

36 MATERIALS SCIENCE↗

Nickel nanofibers synthesized by the electrospinning method

Highlights: ► The nickel nanofibers have been obtained by electrospinning method. ► The nickel nanofibers had rough surface which was consisted of mass nanoparticles. ► The average diameter of nickel nanofibers is about 135 nm and high degree of crystallization. ► The Hc, Ms, and Mr were estimated to be 185 Oe, 51.9 and 16.9 emu/g respectively. - Abstract: In this paper, nickel nanofibers were prepared by electrospinning polyvinyl alcohol/nickel nitrate precursor solution followed by high temperature calcination in air and deoxidation in hydrogen atmosphere. The thermal stability of the as-electrospun PVA/Ni(NO{sub 3}){sub 2} composite nanofibers were characterized by TG–DSC. The morphologies and structures of the as-prepared samples were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), field-emission scanning electronmicroscope (FE-SEM) and field-emission transmission electron microscopy (FE-TEM). The hysteresis loops (M–H loops) were measured by Physical Property Measurement System (PPMS). The results indicate that: the PVA and the nickel nitrate were almost completely decomposed at 460 °C and the products were pure nickel nanofibers with face-centered cubic (fcc) structure. Furthermore, the as-prepared nickel nanofibers had a continuous structure with rough surface and high degree of crystallization. The average diameter of nickel nanofibers was about 135 nm. The nanofibers showed a stronger coercivity of 185 Oe than value of bulk nickel.

36 MATERIALS SCIENCE↗