Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CHEMICAL COMPOSITION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Characterization of Arsenic and Selenium in Coal Fly Ash to Improve Evaluations for Disposal and Reuse Potential (Final Technical Report)

Coal fly ash is a high volume waste material that is discarded in landfills and surface water impoundments across the U.S. and is also widely recycled for a variety of applications. The leaching of potential of contaminants of concern, such as arsenic (As) and selenium (Se), is often the driver of risk assessments for coal ash disposal and reuse. The extent of leachable As and Se depends on several factors related to environmental conditions and fly ash characteristics. Previous studies employed various methods to delineate the concentration, chemical form, and distribution of As and Se in fly ash materials. However, few studies have attempted to directly correlate these properties to mobilization parameters relevant to disposal and reuse. Instead, the coal residuals industries often rely upon standardized leaching protocols that can be laborious or involve hazardous chemicals. The goals of the project were to: 1) Develop and evaluate a characterization protocol that can be used to screen fly ash samples for leachability of As and Se; 2) Characterize As, Se, and associated constituents of fly ash particles at multiple length scales (nanometer to micrometer) to determine if elemental associations differ as a function of the resolution of characterization; and 3) Establish a predictive model for the chemical composition of coal ash produced annually at major U.S. coal fired power facilities on 50-year national coal supply records. For the first objective, we performed leaching experiments with 52 fly ash samples collected from 15 different U.S. power plants and representing coal feedstocks from the three major domestic coal regions. For this work, we assessed the mobilization potential of As and Se in fly ash based on standardized leaching protocols and performed multivariate and lasso regression analyses to explore correlations of leachable As and Se contents with characteristics such as major element contents, loss on ignition (LOI) and pH. The results of regression models indicated that major elements (Fe, Ca, Al) for a wide range of fly ashes can serve as predictor variables for the leaching potential of As, but not for Se. LOI and pH were not important predictive variables in the models. Both regression approaches resulted in relatively strong fits for leachable As (correlation coefficient R 2 = 0.78 for both models) compared to models for leachable Se (R 2 = 0.49). Overall, these results suggest that correlation models combined with on-site elemental analysis with portable analyzers may enable a screening method for leachable As in coal ash. For the second objective, we utilized nanoscale 2-D imaging (30-50 nm spot size) with the Hard X-ray Nanoprobe (HXN) in combination with microprobe X-ray capabilities (~5 µm resolution) to determine As and Se elemental associations in fly ash particles. Speciation of As and Se was also measured at the nano- to microscale with X-ray absorption spectroscopy. The enhanced resolution of HXN showed As and Se that were diffusely located around or comingled with Ca- and Fe-rich particles. The results also showed nanoparticles of Se attached to the surface of fly ash grains. Overall, a comparison of As and Se species across scales highlights the heterogeneity and complexity of chemical associations for these trace elements of concern in coal fly ash. For the final objective, we developed a predictive model for major element composition of coal ash in reserve at disposal sites of major U.S. coal fired power plants. This model was constructed from coal purchase records of 705 power stations from 1973-2022 and was trained on coal ash composition data showing that coal ash elemental composition is strongly associated with the source of feedstock coal. The model showed regional shifts in the major element contents of ash produced by power plants in the last 50 years, particularly for calcium and iron (expressed as %CaO and %Fe 2 O 3 ), as coal-fired power stations changed their source of coal over this time frame. Our approach enables an estimation of coal ash chemical composition that is stored in waste impoundments at individual power stations. Such information can help delineate the regional market potential for material applications that would utilize coal ash harvested from disposal sites across the U.S.

01 COAL, LIGNITE, AND PEAT↗
NASA NTRS2012

Submillimetric Spectroscopic Observations of Volatiles in Comet C-2004 Q2 (Machholz)

Submillimeter spectroscopic observations of comets provide an important tool for understanding their chemical composition and enable a taxonomic classification. Aims. We aim to determine the production rates of several parent- and product volatiles and the C-12/C-13 isotopic carbon ratio in the long-period comet C/2004 Q2 (Machholz), which is likely to originate from the Oort Cloud. Methods. The line emission from several molecules in the coma was measured with high signal-to-noise ratio in January 2005 at heliocentric distance of 1.2 AU by means of high-resolution spectroscopic observations using the Submillimeter Telescope (SMT) at the Arizona Radio Observatory (ARO). Results. We have obtained production rates of several volatiles (CH3OH, HCN, H(sup 13)CN, HNC, H2CO, CO, and CS) by comparing the observed and simulated line-integrated intensities. We calculated the synthetic profiles using a radiative transfer code that includes collisions between neutrals and electrons, and the effects of radiative pumping of the fundamental vibrational levels by solar infrared radiation. Furthermore, multiline observations of the CH3OH J = 7-6 series allow us to estimate the rotational temperature using the rotation diagram technique. We find that the CH3OH population distribution of the levels sampled by these lines can be described by a rotational temperature of 40 +/- 3 K. Derived mixing ratios relative to hydrogen cyanide are CO/CH3OH/H2CO/CS/HNC/HC-13N/HCN= 30.9/24.6/4.8/0.57/0.031/0.013/1 assuming a pointing offset of 8" due to the uncertain ephemeris at the time of the observations and the telescope pointing error. Conclusions. The measured relative molecular abundances in C/2004 Q2 (Machholz) are between low- to typical values of those obtained in Oort Cloud comets, suggesting that it has visited the inner solar system previously and undergone thermal processing. The HNC/HCN abundance ratio of approx 3.1% is comparable to that found in other comets, accounting for the dependence on the heliocentric distance, and could possibly be explained by ion-molecule chemical processes in the low-temperature atmosphere. From a tentative HC-13N detection, the measured value of 97 +/- 30 for the HC-12N/HC-13N isotopologue pair is consistent with a telluric value. The outgassing variability observed in the HCN production rates over a period of two hours is consistent with the rotation of the nucleus derived using different observational techniques.

chemical composition↗
NASA NTRS2009

NEOCAM: Near Earth Object Chemical Analysis Mission: Bridging the Gulf between Telescopic Observations and the Chemical and Mineralogical Compositions of Asteroids or Diogenes A: Diagnostic Observation of the Geology of Near Earth Spectrally-Classified Asteroids

Studies of meteorites have yielded a wealth of scientific information based on highly detailed chemical and isotopic studies possible only in sophisticated terrestrial laboratories. Telescopic studies have revealed an enormous (greater than 10(exp 5)) number of physical objects ranging in size from a few tens of meters to several hundred kilometers, orbiting not only in the traditional asteroid belt between Mars and Jupiter but also throughout the inner solar system. Many of the largest asteroids are classed into taxonomic groups based on their observed spectral properties and are designated as C, D. X, S or V types (as well as a wide range in sub-types). These objects are certainly the sources far the meteorites in our laboratories, but which asteroids are the sources for which meteorites? Spectral classes are nominally correlated to the chemical composition and physical characteristics of the asteroid itself based on studies of the spectral changes induced in meteorites due to exposure to a simulated space environment. While laboratory studies have produced some notable successes (e.g. the identification of the asteroid Vesta as the source of the H, E and D meteorite classes), it is unlikely that we have samples of each asteroidal spectral type in our meteorite collection. The correlation of spectral type and composition for many objects will therefore remain uncertain until we can return samples of specific asteroid types to Earth for analyses. The best candidates for sample return are asteroids that already come close to the Earth. Asteroids in orbit near 1 A.U. have been classified into three groups (Aten, Apollo & Amor) based on their orbital characteristics. These Near Earth Objects (NEOs) contain representatives of virtually all spectral types and sub-types of the asteroid population identified to date. Because of their close proximity to Earth, NEOs are prime targets for asteroid missions such as the NEAR-Shoemaker NASA Discovery Mission to Eros and the Japanese Hyabusa Mission to Itokawa. Also due to their close proximity to Earth, NEOs constitute the most likely set of celestial objects that will impact us in the relatively near future.

Nuth, Joseph A.↗
DOE OSTI2021

An Intermediate-age Alpha-rich Galactic Population in K2

We explore the relationships between the chemistry, ages, and locations of stars in the Galaxy using asteroseismic data from the K2 mission and spectroscopic data from the Apache Point Galactic Evolution Experiment survey. Previous studies have used giant stars in the Kepler field to map the relationship between the chemical composition and the ages of stars at the solar circle. Consistent with prior work, we find that stars with high [α/Fe] have distinct, older ages in comparison to stars with low [α/Fe]. We provide age estimates for red giant branch (RGB) stars in the Kepler field, which support and build upon previous age estimates by taking into account the effect of α-enrichment on opacity. Including this effect for [α/Fe]-rich stars results in up to 10% older ages for low-mass stars relative to corrected solar mixture calculations. This is a significant effect that Galactic archeology studies should take into account. Looking beyond the Kepler field, we estimate ages for 735 RGB stars from the K2 mission, mapping age trends as a function of the line of sight. We find that the age distributions for low- and high-[α/Fe] stars converge with increasing distance from the Galactic plane, in agreement with suggestions from earlier work. We find that K2 stars with high [α/Fe] appear to be younger than their counterparts in the Kepler field, overlapping more significantly with a similarly aged low-[α/Fe] population. This observation may suggest that star formation or radial migration proceeds unevenly in the Galaxy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Revealing the roles of the solid–electrolyte interphase in designing stable, fast-charging, low-temperature Li-ion batteries

Designing the solid–electrolyte interphase (SEI) is critical for stable, fast-charging, low-temperature Li-ion batteries. Fostering a “fluorinated interphase,” SEI enriched with LiF, has become a popular design strategy. Although LiF possesses low Li-ion conductivity, many studies have reported favorable battery performance with fluorinated SEIs. Such a contradiction suggests that optimizing SEI must extend beyond chemical composition design to consider spatial distributions of different chemical species. In this work, we demonstrate that the impact of a fluorinated SEI on battery performance should be evaluated on a case-by-case basis. Sufficiently passivating the anode surface without impeding Li-ion transport is key. We reveal that a fluorinated SEI containing excessive and dense LiF severely impedes Li-ion transport. In contrast, a fluorinated SEI with well-dispersed LiF (i.e., small LiF aggregates well mixed with other SEI components) is advantageous, presumably due to the enhanced Li-ion transport across heterointerfaces between LiF and other SEI components. An electrolyte, 1 M LiPF 6 in 2-methyl tetrahydrofuran (2MeTHF), yields a fluorinated SEI with dispersed LiF. This electrolyte allows anodes of graphite, μSi/graphite composite, and pure Si to all deliver a stable Coulombic efficiency of 99.9% and excellent rate capability at low temperatures. Pouch cells containing layered cathodes also demonstrate impressive cycling stability over 1,000 cycles and exceptional rate capability down to −20 °C. Through experiments and theoretical modeling, we have identified a balanced SEI-based approach that achieves stable, fast-charging, low-temperature Li-ion batteries.

25 ENERGY STORAGE↗
DOE OSTI2021

Evidence of an oxidation induced phase transformation for a delta phase plutonium-gallium alloy

The oxidation of an ~1.5 at% Ga plutonium metal alloy in dry air as a function of time was studied using a combination of FIB-SEM, AES, and XRD. Analysis of SEM images of FIB cross-sections of the oxide allowed for direct measurement of the oxide thickness as well as determination of heterogeneity in the extent of the oxide. AES analysis performed on cross-sections of the oxide allowed for quantitative analysis of the atomic composition and semi-quantitative analysis of the chemical composition. Initial preparation of the sample was found to induce a martensitic transformation to α' - Pu with an average thickness of 233 nm. Electropolishing was found to be sufficient to fully remove the α' layer with creation of only a minimum oxide layer. Growth of the oxide in dry air was found to initially follow parabolic kinetics, with a parabolic rate constant orders of magnitude higher than expected for δ-Pu but in-line with values extrapolated to room temperature for α-Pu. Following complete oxidation of the initial α` layer, further regions of plutonium metal depleted in gallium were observed to form at the oxide / metal interface. However, gallium, as Ga 2 O 3 , was found to be enriched at the surface and present in the oxide in an amount comparable to the relative Ga:Pu ratio of the bulk metal alloy. Finally, the results presented here serve to bridge a diverse array of previous experimental and theoretical data and provide the first comprehensive view of the fate of the δ-stabilizer during formation of an oxide.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Highly swellable hydrogels prepared from extensively oxidized lignin

Biopolymers such as lignin are gaining renewed appeal due to the need for sustainable materials. Herein, we used chelator-mediated Fenton (CMF) chemistry to oxidize Kraft lignin to develop sustainable super absorbent materials. The CMF chemistry adds oxygen, opens aromatic rings and increases COOH content, producing hydrophilic lignin without depolymerization. UV absorption, molecular weight, elemental analysis, and titration were used to study the chemical compositions of CMF-processed lignin. Then the chemically modified hydrophilic lignin was used to produce lignin-based hydrogels utilizing an aqueous polymerization and cross-linking reaction that enabled tunable properties. The resulting lignin hydrogels absorbed water up to 96% and swelled up to 2400%, as well as being re-swellable in water. These lignin-based hydrogels may be applicable in water-absorbing products in consumer goods and agriculture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Multi-modal characterization methods of solid-electrolyte interphase in silicon-graphite composite electrodes

Composite silicon-graphite (Si-Gr) anodes can improve battery energy density, due to Si's high gravimetric capacity, while mitigating mechanical degradation of the anode and solid-electrolyte interphase (SEI) caused by Si volumetric expansion. Optimizing these anodes is challenging, in part due to difficulty characterizing the SEI structure and composition. In this work, we present multi-modal characterization of the SEI on composite Si-Gr anodes to relate SEI chemical composition and structure to functional properties. Discrepancies in elemental concentrations from X-ray photoelectron spectroscopy, Auger electron spectroscopy, and energy-dispersive X-ray spectroscopy (EDS) are attributed to varying information depth and lateral resolution of the individual probes. However, by combining quantitative composition information with spatially resolved element mapping from scanning transmission electron microscopy, EDS, and electron energy loss spectroscopy, a holistic picture of the SEI emerges. We observe the bilayer SEI structure and a direct correlation between elemental Li and F, suggesting that most Li in the SEI exists as lithium fluoride (LiF). Further, LiF concentration is directly proportional to the maximum SEI resistivity, as determined by scanning spreading resistance microscopy. Lastly, there is an inverse relationship between lithium carbonate and LiF concentration in the SEI, providing insight into the detailed chemistry of SEI formation and evolution.

25 ENERGY STORAGE↗
DOE OSTI2020

Hf‐W chronology of a macrochondrule from the L5/6 chondrite Northwest Africa 8192

Abstract A large, igneous‐textured, and 2 cm‐sized spherical object from the L5/6 chondrite NWA 8192 was investigated for its chemical composition, petrography, O isotopic composition, and Hf‐W chronology. The petrography and chemical data indicate that this object closely resembles commonly found chondrules in ordinary chondrites and is therefore classified as a “macrochondrule.* As a result of metal loss during its formation, the macrochondrule exhibits elevated Hf/W, which makes it possible to date this object using the short‐lived 182 Hf‐ 182 W system. The Hf‐W data provide a two‐stage model age for metal–silicate fractionation of 1.4 ± 0.6 Ma after Ca‐Al‐rich inclusion (CAI) formation, indicating that the macrochondrule formed coevally to normal‐sized chondrules from ordinary chondrites. By contrast, Hf‐W data for metal from the host chondrite yield a younger model age of ~11 Ma after CAIs. This younger age agrees with Hf‐W ages of other type 5–6 ordinary chondrites, and corresponds to the time of cooling below the Hf‐W closure temperature during thermal metamorphism on the parent body. The Hf‐W model age difference between the macrochondrule and the host metal demonstrates that the Hf‐W systematics of the bulk macrochondrule were not disturbed during thermal metamorphism, and therefore, that the formation age of such objects can still be determined even in strongly metamorphosed samples. Collectively, this study illustrates that chondrule formation was not limited to mm‐size objects, implying that the rarity of macrochondrules reflects either that this process was very inefficient, that subsequent nebular size‐sorting decimated large chondrules, or that large precursors were rare.

58 GEOSCIENCES↗
NASA NTRS1980

UV actinometer film

Cumulative UV radiation can be measured by low-cost polymer film that is unaffacted by visible light. Useful for virtually any surface, film can help paint and plastics manufacturers determine how well their products stand up against UV radiation. Actinometer film uses photochemically sensitive compound that changes its chemical composition in response to solar radiation. Extent of chemical conversion depends on length exposure and can be measured by examining film sample with spectrophotometer. Film can be exposed from several seconds up to month.

Coulbert, C. D.↗
NASA NTRS1989

A study of native oxides of beta-SiC using Auger electron spectroscopy

Thermal and anodic oxide films of beta-SiC are analyzed using Auger electron spectroscopy. Auger depth-composition profiles are obtained in order to determine the chemical composition of the oxide films. The position and shape of silicon spectral peaks are used to estimate the chemical bonding of the oxide constituents. It is found that the wet thermal oxide is almost stoichiometric but contains about 14 pct C. Dry oxide, on the other hand, has less than 3 pct C but is highly nonstoichiometric. The C content in the anodic oxide is 12 pct. Anodic oxide films, like dry-oxide films, are nonstoichiometric. A model of the SiC oxidation process is presented.

Chaudhry, M. Iqbal↗
NASA NTRS2019

Desert Dust, Industrialization and Agricultural Fires: Health Impacts of Outdoor Air Pollution in Africa

The African continent continuously experiences extreme aerosol load conditions, during which the World Health Organizational (WHO) clean air standard of 10 μgm(exp ‐3) of PM(2.5) mass is systematically exceeded. Africa holds the world largest source of desert dust emissions, undergoes strong industrial growth, and produces approximately a third of the Earth's biomass burning aerosol particles. Sub‐Saharan biomass burning is driven by agricultural practices, such as burning fields and bushes in the post‐harvest season for fertilization, land management and pest control. Thus, these emissions are predominantly anthropogenic. Here we use global atmospheric composition, climate, and health models to simulate the chemical composition of the atmosphere and calculate the mortality rates for Africa by distinguishing between purely natural, industrial/domestic and biomass burning emissions. Air quality related deaths in Africa rank within the top leading causes of death in Africa. Our results of ~780,000 premature deaths annually point to the extensive health impacts of natural emissions, high mortality rate caused by industrialization in Nigeria and South Africa, and to a smaller extent by fire emissions in Central and West Africa. 43,000 premature deaths in Africa are linked to biomass burning mainly driven by agriculture. Our results also show that natural sources, in particular windblown dust emissions, have large impacts on air quality and human health in Africa.

fires↗
NASA NTRSDate not supplied

A window on the composition of the early solar nebula: 2014MU69, Pluto, and Phoebe

The initial chemical composition of any solar nebula will depend upon the degree to which 1) organic and ice components form on dust grains, 2) organic and molecular species form in the gas phase, 3) organics and ices are exchanged between the gas and solid state, and 4) the precursor and newly formed (more complex) materials survive and are modified in the developing planetary system. Infrared and radio observations of star-forming regions reveal that complex chemistry occurs on icy grains, sometimes before stars even form. Additional processing, through the protosolar disk and within the solar nebula further modifies most, but probably not all, of the initial materials. In fact, the modern Solar System still carries a fraction of its interstellar inheritance [Alexander et al., 2017]. Here we focus on three examples of small bodies in our Solar System, each containing chemical and dynamical clues to its origin and evolution: the small, cold-classical Kuiper Belt object (KBO) 2014MU69 , Pluto and Saturn’s moon, Phoebe. The New Horizons flyby of 2014 MU69 has given the first view of an unaltered body composed of material originally in the solar nebula at ~45 AU. The spectrum reveals methanol ice (not commonly found), a possible detection of water ice (Stern et al. 2019). Pluto’s internal and surface inventory of volatiles and complex organics, together with active geological processes including cryo-volcanism, indicate a surprising level of activity on a body in the outermost region of the Solar System, and the fluid that emerges from subsurface reservoirs may contain material inherited from the solar nebula (Cruikshank et al. 2019). Meanwhile, Saturn's captured moon, Phoebe, carries high D/H in H2O [Clark et al. 2018)], and complex organics (Cruikshank et al. 2008), both consistent with its formation in, and inheritance from, the outer solar nebula. Together, these objects provide windows on the origin and evolution of our Solar System and constraints to be considered in future chemical and physical models of PPDs. The Spitzer Space telescope discovered the ring of dust around Saturn that emanated from the bombardment of Phoebe in the recent past, dislodging primitive Solar System material from deep within that satellite. In addition, Spitzer has provided detailed studies of the chemistry of star forming regions where methanol and other ices are readily observed. As a result of these and other observations, protoplanetary disk models are beginning to combine both dynamical and chemical complexities into their codes, resulting in new insights for exoplanetary systems.

Yvonne J. Pendleton↗
NASA NTRS1991

Physical-chemical processes in a protoplanetary cloud

Physical-chemical processes in a protoplanetary cloud are discussed. The following subject areas are covered: (1) characteristics of the chemical composition of molecular interstellar clouds; (2) properties and physico-chemical process in the genesis of interstellar dust grains; and (3) the isotope composition of volatiles in bodies of the Solar System.

Lavrukhina, Avgusta K.↗
DOE OSTI2020

Validation and Recalibration of the Solubility Models in Support of the Heater Test in Salt Formations

The US Department of Energy Office of Nuclear Energy is conducting a brine availability heater test to characterize the thermal, mechanical, hydrological and chemical response of salt at elevated temperatures. In the heater test, brines will be collected and analyzed for chemical compositions. In order to support the geochemical modeling of chemical evolutions of the brines during the heater test, we are recalibrating and validating the solubility models for the mineral constituents in salt formations up to 100°C, based on the solubility data in multiple component systems as well as simple systems from literature. In this work, we systematically compare the model-predicted values based on the various solubility models related to the constituents of salt formations, with the experimental data. As halite is the dominant constituent in salt formations, we first test the halite solubility model in the Na-Mg-Cl dominated brines. We find the existing halite solubility model systematically over-predict the solubility of halite. We recalibrate the halite model, which can reproduce halite solubilities in Na-Mg-Cl dominated brines well. As gypsum/anhydrite in salt formations controls the sulfate concentrations in associated brines, we test the gypsum solubility model in NaCl solutions up to 5.87 mol•kg –1 from 25 ° C to 50 ° C. The testing shows that the current gypsum solubility model reproduces the experimental data well when NaCl concentrations are less than 1 mol•kg –1 . However, at NaCl concentrations higher than 1, the model systematically overpredicts the solubility of gypsum. In the Na + —Cl – —SO 4 2– —CO 3 2– system, the validation tests up to 100 ° C demonstrate that the model excellently reproduces the experimental data for the solution compositions equilibrated with one single phase such as halite (NaCl) or thenardite (Na 2 SO 4 ), with deviations equal to, or less than, 1.5 %. The model is much less ideal in reproducing the compositions in equilibrium with the assemblages of halite + thenardite, and of halite + thermonatrite (Na 2 CO 3 •H 2 O), with deviations up to 31 %. The high deviations from the experimental data for the multiple assemblages in this system at elevated temperatures may be attributed to the facts that the database has the Pitzer interaction parameters for Cl – —CO 3 2– and SO 4 2– —CO 3 2– only at 25 ° C. Finally, in the Na + —Ca 2+ —SO 4 2– —HCO 3 – system, the validation tests also demonstrate that the model reproduces the equilibrium compositions for one single phase such as gypsum better than the assemblages of more than one phase.

36 MATERIALS SCIENCE↗