Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Aircraft design”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Transonic transport study: Structures and aerodynamics

The structural and aerodynamic aspects of a general study of advanced transonic transports are presented. Aircraft designed to cruise at Mach numbers of 0.90, 0.98, and 1.15 were comparatively analyzed. The wings of all three aircraft employ supercritical sections, and the two aircraft with the highest cruise Mach numbers also employ fuselage area ruling. Structural/aerodynamic characteristics and interactions are investigated both parametrically and with the aid of an automated configuration optimization program. The effects of replacing conventional aluminum airframe structure by advanced filamentary composite (carbon/epoxy) structure receive particular attention. The methods employed in the structural/aerodynamic analysis are discussed.

Ardema, M. D.↗
NASA NTRS1975

The application of measurement techniques to track flutter testing

The application is discussed of measurement techniques to captive flight flutter tests at the Supersonic Naval Ordnance Research Track (SNORT), U. S. Naval Ordnance Test Station, China Lake, California. The high-speed track, by its ability to prove the validity of design and to accurately determine the actual margin of safety, offers a unique method of flutter testing for the aircraft design engineer.

Roglin, H. R.↗
NASA NTRS1975

A brief study of the effects of turbofan-engine bypass ratio on short and long haul cruise aircraft

A brief study of the effects of turbofan-engine bypass ratio on Breguet cruise range and take-off distance for subsonic cruise aircraft showed significant differences between short- and long-haul aircraft designs. Large thrust lapse rates at high bypass ratios caused severe reductions in cruise range for short-haul aircraft because of increases in propulsion system weight. Long-haul aircraft, with a higher fuel fraction (ratio of propulsion weight plus total fuel weight to gross take-off weight), are less sensitive to propulsion-system weight and, accordingly, were not significantly affected by bypass-ratio variations. Both types of aircraft have shorter take-off distances at higher bypass ratios because of higher take-off thrust-weight ratios.

Keith, A. L., Jr.↗
NASA NTRS1978

A review of thrust-vectoring schemes for fighter applications

This paper presents a review of thrust vectoring schemes for advanced fighter applications. Results are presented from wind tunnel and system integration studies on thrust vectoring nozzle concepts. Vectoring data are presented from wind tunnel tests of axisymmetric C-D (convergent-divergent) and nonaxisymmetric wedge, C-D, single ramp and USB (upper-surface blowing) nozzle concepts. Results from recent airframe/nozzle integration studies on the impact of thrust vectoring on weight, cooling and performance characteristics are discussed. This review indicates that the aircraft designer has, at his disposal, a wide range of thrust vectoring schemes which offer potential for added or improved aircraft capability.

Berrier, B. L.↗
NASA NTRS1980

An assessment of the future roles of the National Transonic Facility and the Langley Transonic Dynamics Tunnel in aeroelastic and unsteady aerodynamic testing

The characteristics and capabilities of the two tunnels, that relate to studies in the fields of aeroelasticity and unsteady aerodynamics are discussed. Scaling considerations for aeroelasticity and unsteady aerodynamics testing in the two facilities are reviewed, and some of the special features (or lack thereof) of the Langley Research Center Transonic Dynamics Tunnel (TDT) and the National Transonic Facility (NTF) that will weigh heavily in any decisions conducting a given study in the two tunnels are discussed. For illustrative purposes a fighter and a transport airplane are scaled for tests in the NTF and in the TDT, and the resulting model characteristics are compared. The NTF was designed specifically to meet the need for higher Reynolds number capability for flow simulation in aerodynamic performance testing of aircraft designs. However, the NTF can be a valuable tool for evaluating the severity of Reynolds number effects in the areas of dynamic aeroelasticity and unsteady aerodynamics. On the other hand, the TDT was constructed specifically for studies and tests in the field of aeroelasticity. Except for tests requiring the Reynolds number capability of NTF, the TDT will remain the primary facility for tests of dynamic aeroelasticity and unsteady aerodynamics.

Hanson, P. W.↗
NASA NTRS1987

Unresolved issues in wind shear encounters

Much remains to be learned about the hazards of low altitude wind shear to aviation. New research should be conducted on the nature of the atmospheric environment, on aircraft performance, and on guidance and control aids. In conducting this research, it is important to distinguish between near-term and far-term objectives, between basic and applied research, and between uses of results for aircraft design or for real-time implementation. Advances in on-board electronics can be applied to assuring that aircraft of all classes have near optimal protection against wind shear hazards.

Stengel, Robert F.↗
NASA NTRS2000

Performance of the OVERFLOW-MLP and LAURA-MLP CFD Codes on the NASA Ames 512 CPU Origin System

The shared memory Multi-Level Parallelism (MLP) technique, developed last year at NASA Ames has been very successful in dramatically improving the performance of important NASA CFD codes. This new and very simple parallel programming technique was first inserted into the OVERFLOW production CFD code in FY 1998. The OVERFLOW-MLP code's parallel performance scaled linearly to 256 CPUs on the NASA Ames 256 CPU Origin 2000 system (steger). Overall performance exceeded 20.1 GFLOP/s, or about 4.5x the performance of a dedicated 16 CPU C90 system. All of this was achieved without any major modification to the original vector based code. The OVERFLOW-MLP code is now in production on the inhouse Origin systems as well as being used offsite at commercial aerospace companies. Partially as a result of this work, NASA Ames has purchased a new 512 CPU Origin 2000 system to further test the limits of parallel performance for NASA codes of interest. This paper presents the performance obtained from the latest optimization efforts on this machine for the LAURA-MLP and OVERFLOW-MLP codes. The Langley Aerothermodynamics Upwind Relaxation Algorithm (LAURA) code is a key simulation tool in the development of the next generation shuttle, interplanetary reentry vehicles, and nearly all "X" plane development. This code sustains about 4-5 GFLOP/s on a dedicated 16 CPU C90. At this rate, expected workloads would require over 100 C90 CPU years of computing over the next few calendar years. It is not feasible to expect that this would be affordable or available to the user community. Dramatic performance gains on cheaper systems are needed. This code is expected to be perhaps the largest consumer of NASA Ames compute cycles per run in the coming year.The OVERFLOW CFD code is extensively used in the government and commercial aerospace communities to evaluate new aircraft designs. It is one of the largest consumers of NASA supercomputing cycles and large simulations of highly resolved full aircraft are routinely undertaken. Typical large problems might require 100s of Cray C90 CPU hours to complete. The dramatic performance gains with the 256 CPU steger system are exciting. Obtaining results in hours instead of months is revolutionizing the way in which aircraft manufacturers are looking at future aircraft simulation work. Figure 2 below is a current state of the art plot of OVERFLOW-MLP performance on the 512 CPU Lomax system. As can be seen, the chart indicates that OVERFLOW-MLP continues to scale linearly with CPU count up to 512 CPUs on a large 35 million point full aircraft RANS simulation. At this point performance is such that a fully converged simulation of 2500 time steps is completed in less than 2 hours of elapsed time. Further work over the next few weeks will improve the performance of this code even further.The LAURA code has been converted to the MLP format as well. This code is currently being optimized for the 512 CPU system. Performance statistics indicate that the goal of 100 GFLOP/s will be achieved by year's end. This amounts to 20x the 16 CPU C90 result and strongly demonstrates the viability of the new parallel systems rapidly solving very large simulations in a production environment.

Taft, James R.↗
NASA NTRSDate not supplied

Multidisciplinary Design Optimization of a Transonic Truss-Braced Wing using Physics-Based Models

Economic and environmental forces have placed pressure on the aviation industry to produce future aircraft designs with substantial improvements over those flying today. In order to meet these ambitious goals, new concepts such as the Transonic Truss-Braced Wing (TTBW) are being considered which diverge from the traditional tube-and-wing design. While this concept offers potential performance benefits over its traditional counterpart, it also features more coupling between various physics disciplines that must be considered during the design of the concept. This unique challenge provides a ripe opportunity for the application of multidisciplinary design optimization tool sets. The final work will couple together the mission analysis capability of Aviary with OpenAeroStruct for aerodynamic analysis and TACS for structural analysis. Using these tools we will preform a design optimization on the TTBW concept minimizing design fuel burn. The optimization will include design variables for mission trajectory, wing geometry, and structural sizing variables.

mbsae↗
NASA NTRS2018

Aeroacoustic Validation of Installed Low Noise Propulsion for NASA's N+2 Supersonic Airliner

An aeroacoustic test was conducted at NASA Glenn Research Center on an integrated propulsion system designed to meet noise regulations of ICAO Chapter 4 with 10EPNdB cumulative margin. The test had two objectives: to demonstrate that the aircraft design did meet the noise goal, and to validate the acoustic design tools used in the design. Variations in the propulsion system design and its installation were tested and the results compared against predictions. Far-field arrays of microphones measured the acoustic spectral directivity, which was transformed to full scale as noise certification levels. Phased array measurements confirmed that the shielding of the installation model adequately simulated the full aircraft and provided data for validating RANS-based noise prediction tools. Particle image velocimetry confirmed that the flow field around the nozzle on the jet rig mimicked that of the full aircraft and produced flow data to validate the RANS solutions used in the noise predictions. The far-field acoustic measurements confirmed the empirical predictions for the noise. Results provided here detail the steps taken to ensure accuracy of the measurements and give insights into the physics of exhaust noise from installed propulsion systems in future supersonic vehicles.

aeroacousti↗
NASA NTRS2018

Aeroacoustic Validation of Installed Low Noise Propulsion for NASA's N+2 Supersonic Airliner

An aeroacoustic test was conducted at NASA Glenn Research Center on an integrated propulsion system designed to meet noise regulations of ICAO Chapter 4 with 10EPNdB cumulative margin. The test had two objectives: to demonstrate that the aircraft design did meet the noise goal, and to validate the acoustic design tools used in the design. Variations in the propulsion system design and its installation were tested and the results compared against predictions. Far-field arrays of microphones measured the acoustic spectral directivity, which was transformed to full scale as noise certification levels. Phased array measurements confirmed that the shielding of the installation model adequately simulated the full aircraft and provided data for validating RANS-based noise prediction tools. Particle image velocimetry confirmed that the flow field around the nozzle on the jet rig mimicked that of the full aircraft and produced flow data to validate the RANS solutions used in the noise predictions. The far-field acoustic measurements confirmed the empirical predictions for the noise. Results provided here detail the steps taken to ensure accuracy of the measurements and give insights into the physics of exhaust noise from installed propulsion systems in future supersonic vehicles.

supersonic↗
NASA NTRS1977

Modeling and parameter uncertainties for aircraft flight control system design

Values of plant dynamic uncertainties for some recent aircraft design and development programs are given. Histories of pertinent aerodynamic, inertial, and structural parameter variations are given for a period of time from program initiation to aircraft certification. These data can be used as typical of future vehicles so that control system design concepts are evaluated with due consideration to their sensitivity to uncertainties in plant dynamics.

Mcdonnell, J. D.↗
NASA NTRS1975

Estimation of transonic aircraft aerodynamics to high angles of attack

A recently developed method for estimating transonic aircraft aerodynamics to high angles of attack which is especially suited to computerized aircraft design and optimization studies is described. Following theoretical and empirical guidelines, explicit nonlinear equations are formulated for subsonic, transonic, and supersonic speeds; new algorithms are used for assessing compressibility effects and for analyzing transonic, shock-dominated flows which adhere to Laitone's limit Mach-number criterion. Viscous dominated flows are not analyzed. The transonic influence of viscosity is indirectly accommodated by assigning designated inputs rather than extracted solutions for the chordwise locations of shock and separation. The method is extended to complete aircraft configurations by including accounts for nose lift, the wing downwash field, and tail lift. Several comparisons of experiment and estimate are included.

Axelson, J. A.↗
NASA NTRS1976

The future of aeronautical transportation; Proceedings of the Princeton University Conference, Princeton, N.J., November 10, 11, 1975

Papers are presented on first and second generation supersonic transports, the Supersonic Cruise Aircraft Research Program, wide-body subsonic transports and vertical and short takeoff and landing transports. Aspects of aircraft design are examined including the airframe, propulsion and electronics. Government regulation, cost/benefit analysis of research and development, airline economics and aircraft financing are also considered. The environmental impact of air transportation is discussed with emphasis on atmospheric emissions (including stratospheric pollution) and noise pollution. Individual items are announced in this issue.

Source record↗
NASA NTRS2001

Onyx-Advanced Aeropropulsion Simulation Framework Created

The Numerical Propulsion System Simulation (NPSS) project at the NASA Glenn Research Center is developing a new software environment for analyzing and designing aircraft engines and, eventually, space transportation systems. Its purpose is to dramatically reduce the time, effort, and expense necessary to design and test jet engines by creating sophisticated computer simulations of an aerospace object or system (refs. 1 and 2). Through a university grant as part of that effort, researchers at the University of Toledo have developed Onyx, an extensible Java-based (Sun Micro-systems, Inc.), objectoriented simulation framework, to investigate how advanced software design techniques can be successfully applied to aeropropulsion system simulation (refs. 3 and 4). The design of Onyx's architecture enables users to customize and extend the framework to add new functionality or adapt simulation behavior as required. It exploits object-oriented technologies, such as design patterns, domain frameworks, and software components, to develop a modular system in which users can dynamically replace components with others having different functionality.

Reed, John A.↗
NASA NTRS2015

Semi-Empirical Prediction of Aircraft Low-Speed Aerodynamic Characteristics

This paper lays out a comprehensive methodology for computing a low-speed, high-lift polar, without requiring additional details about the aircraft design beyond what is typically available at the conceptual design stage. Introducing low-order, physics-based aerodynamic analyses allows the methodology to be more applicable to unconventional aircraft concepts than traditional, fully-empirical methods. The methodology uses empirical relationships for flap lift effectiveness, chord extension, drag-coefficient increment and maximum lift coefficient of various types of flap systems as a function of flap deflection, and combines these increments with the characteristics of the unflapped airfoils. Once the aerodynamic characteristics of the flapped sections are known, a vortex-lattice analysis calculates the three-dimensional lift, drag and moment coefficients of the whole aircraft configuration. This paper details the results of two validation cases: a supercritical airfoil model with several types of flaps; and a 12-foot, full-span aircraft model with slats and double-slotted flaps.

Olson, Erik D.↗
NASA NTRS2018

Application of a Knowledge-Based Optimization Method for Aerodynamic Design

The current research is investigating the application of an optimization technique to an existing knowledge-based design tool. The optimization method, referred to as CODISC, helps improve the results from a knowledge-based design by eliminating the required advanced design knowledge, or help fine-tune a well-performing vehicle. Three CODISC designs are presented using a generic transonic transport, the Common Research Model (CRM). One design optimizes the baseline CRM to demonstrate the ability to improve a well-performing vehicle. Another design is performed from the CRM with camber and twist removed, which highlights the ability to use CODISC in the conceptual design phase. The final design implements laminar flow on the CRM, showing how CODISC can optimize the extent of laminar flow to find the best aerodynamic performance. All three CODISC designs reduced the vehicle drag compared to the baseline CRM, and highlight the new optimization technique’s versatility in the aircraft design industry.

CODISC↗
NASA NTRSDate not supplied

Application of Framework for Estimating Performance and Associated Uncertainty for Modified Aircraft Configurations Using NASA's X-57 Maxwell

A framework to estimate the performance and associated uncertainty of modified configurations of certified aircraft is applied to the X-57 Maxwell aircraft. In previous theoretical studies, the framework was shown to predict performance and uncertainty bounds accurately. The X-57 Maxwell is an experimental aircraft designed to demonstrate the benefits of distributed electric propulsion through a series of four incremental modifications to a Tecnam P2006T aircraft. The available models and data are first shown to be within the application domain of the framework. We then apply the framework to two X-57 Maxwell modifications. We compare the estimated performance and associated uncertainties against the airworthiness criteria. The results indicate that the framework is a promising tool for the certification by analysis workflow. We expect the framework to reduce and supplement the flight testing required to show compliance to airworthiness certification criteria for a modified configuration.

Uncertainty Quantification↗
NASA NTRSDate not supplied

Application of Framework for Estimating Performance and Associated Uncertainty for Modified Aircraft Configurations Using NASA's X-57 Maxwell

A framework to estimate the performance and associated uncertainty of modified configurations of certified aircraft is applied to the X-57 Maxwell aircraft. In previous theoretical studies, the framework was shown to predict performance and uncertainty bounds accurately. The X-57 Maxwell is an experimental aircraft designed to demonstrate the benefits of distributed electric propulsion through a series of four incremental modifications to a Tecnam P2006T aircraft. The available models and data are first shown to be within the application domain of the framework. We then apply the framework to two X-57 Maxwell modifications. We compare the estimated performance and associated uncertainties against the airworthiness criteria. The results indicate that the framework is a promising tool for the certification by analysis workflow. We expect the framework to reduce and supplement the flight testing required to show compliance to airworthiness certification criteria for a modified configuration.

Uncertainty Quantification↗