SEARCH · Engineering Papers

Results for “Agreements”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

All sources NASA NTRS DOE OSTI

NASA NTRS1981

Viscous-inviscid interaction method including wake effects for three-dimensional wing-body configurations

A viscous-inviscid interaction method has been developed by using a three-dimensional integral boundary-layer method which produces results in good agreement with a finite-difference method in a fraction of the computer time. The integral method is stable and robust and incorporates a model for computation in a small region of streamwise separation. A locally two-dimensional wake model, accounting for thickness and curvature effects, is also included in the interaction procedure. Computation time spent in converging an interacted result is, many times, only slightly greater than that required to converge an inviscid calculation. Results are shown from the interaction method, run at experimental angle of attack, Reynolds number, and Mach number, on a wing-body test case for which viscous effects are large. Agreement with experiment is good; in particular, the present wake model improves prediction of the spanwise lift distribution and lower surface cove pressure.

Streett, C. L.↗

NASA NTRS1982

Comparison of Flight Measured, Predicted and Wind Tunnel Measured Winglet Characteristics on a KC-135 Aircraft

One of the objectives of the KC-135 Winglet Flight Research and Demonstration Program was to obtain experimental flight test data to verify the theoretical and wind tunnel winglet aerodynamic performance prediction methods. Good agreement between analytic, wind tunnel and flight test performance was obtained when the known differences between the tests and analyses were accounted for. The flight test measured fuel mileage improvements for a 0.78 Mach number was 3.1 percent at 8 x 10(5) pounds W/delta and 5.5 percent at 1.05 x 10(6) pounds W/delta. Correcting the flight measured data for surface pressure differences between wind tunnel and flight resulted in a fuel mileage improvement of 4.4 percent at 8 x 10(5) pounds W/delta and 7.2 percent at 1.05 x 10(6) pounds W/delta. The performance improvement obtained was within the wind tunnel test data obtained from two different wind tunnel models. The buffet boundary data obtained for the baseline configuration was in good agreement with previous established data. Buffet data for the 15 deg cant/-4 deg incidence configuration showed a slight improvement, while the 15 deg cant/-2 deg incidence and 0 deg cant/-4 deg incidence data showed a slight deterioration.

Dodson, R. O., Jr.↗

NASA NTRS1984

Thermal response of Space Shuttle wing during reentry heating

A structural performance and resizing (SPAR) finite element thermal analysis computer program was used in the heat transfer analysis of the space shuttle orbiter that was subjected to reentry aerodynamic heatings. One wing segment of the right wing (WS 240) and the whole left wing were selected for the thermal analysis. Results showed that the predicted thermal protection system (TPS) temperatures were in good agreement with the space transportation system, trajectory 5 (STS-5) flight-measured temperatures. In addition, calculated aluminum structural temperatures were in fairly good agreement with the flight data up to the point of touchdown. Results also showed that the internal free convection had a considerable effect on the change of structural temperatures after touchdown.

Gong, L.↗

NASA NTRS1984

Three-dimensional unsteady viscous flow analysis over airfoil sections

A three-dimensional solution procedure for the approximate form of the Navier-Stokes equation was exercised in the two- and three-dimensional modes to compute the unsteady turbulent boundary layer on a flat plate corresponding to the data of Karlsson. The procedure is based on the use of a consistently split Linearized Block Implicit technique in conjunction with a QR operator scheme. New time-dependent upstream boundary conditions were developed that yielded realistic solutions for the interior in the vicinity of the upstream boundary. Comparisons of the computation employing these boundary conditions with the data indicate that both qualitative and quantitative agreement was obtained for the mean velocity and the in phase and out of phase components of the first harmonic of the velocity. In addition, the calculation gave results for the skin friction phase angle that had expected physical behavior for large distances downstream of the inflow boundary. For the three-dimensional case, the two-dimensional data of Karlsson was considered, but in a coordinate system skewed at 45 deg to the free stream direction. The results of the calculations were in excellent agreement with the data and the two-dimensional computations.

Weinberg, B. C.↗

NASA NTRS1984

Validation of an Active Gear, Flexible Aircraft Take-off and Landing analysis (AGFATL)

The results of an analytical investigation using a computer program for active gear, flexible aircraft take off and landing analysis (AGFATL) are compared with experimental data from shaker tests, drop tests, and simulated landing tests to validate the AGFATL computer program. Comparison of experimental and analytical responses for both passive and active gears indicates good agreement for shaker tests and drop tests. For the simulated landing tests, the passive and active gears were influenced by large strut binding friction forces. The inclusion of these undefined forces in the analytical simulations was difficult, and consequently only fair to good agreement was obtained. An assessment of the results from the investigation indicates that the AGFATL computer program is a valid tool for the study and initial design of series hydraulic active control landing gear systems.

Mcgehee, J. R.↗

NASA NTRS1984

Laser velocimeter measurements of dynamic stall

Laser velocimeter measurements were made during the study of a two-dimensional NACA 0012 airfoil undergoing conditions of dynamic stall. The measurements, which were obtained in the Ames 2 foot wind tunnel at reduced frequencies of 0.12 and 1.2, show significant flow field hysteresis around the static stall angle. Comparisons were also made with dual-plate interferograms and good agreement was found for the attached flow cases. For separated flow, characteristic vortex shedding caused poor agreement and significantly increased the measured Reynolds shear stresses.

Owen, F. K.↗

NASA NTRS1984

Flow-field measurements on an airfoil with an oscillating trailing-edge using holographic interferometry

Holographic interferometry data were acquired on an NACA 64A010 airfoil with an oscillating flap. The airfoil was installed in the Ames 11-Foot Transonic Wind Tunnel between splitter plates. Recordings were made at discrete phase angles of the oscillation. The interferometry results provided detailed flow visualization of the shock boundary-layer interaction and the separated flow. Quantitative results were extracted from the interferograms to produce pressure data. These results were compared to the surface pressures obtained with the surface pressure taps. Excellent agreement was found for low angles of incidence. At larger angles of incidence, the flow had greater three-dimensionality, and the results were not in good agreement in some regions of the flow field. Mach contours were traced for representative flow conditions. Wake profiles were also obtained using the assumption of constant pressure across the wake and the Crocco relationship.

Bachalo, W. D.↗

NASA NTRS1983

Self-regulated star formation in the galaxy

Assuming that star formation regions are supported against gravity by winds from low mass young objects, the stellar birthrate obtained for winds interacting in the momentum conservation stage is correlated with the molecular gas density of the parent fragment as n to the 13/8 power or n to the 5/8 power, respectively, for rates/unit volume or rates/unit mass. Birthrates derived from protostellar rotationally driven winds are in good agreement with the observed star production in the cloud B18. With the aid of observed Taurus-Auriga complex properties, the present model is extrapolated to the Galaxy as a whole, yielding a Milky Way predicted average rate that is in good agreement with standard estimates based on observations of the solar neighborhood.

Franco, J.↗

NASA NTRS1983

A modeling study of SO(x)-NO(x)-hydrocarbon plumes and their transport to the background troposphere

The behavior of a complex urban plume and its transport to the background troposphere are analyzed in terms of a model including sulfur oxide, nitrogen oxide and hydrocarbon (HC) photochemistry. A reaction mechanism consisting of 73 NO(x), SO(x) and HC reactions is employed in a model taking account of plume dilution, entrainment, deposition and the development of a diurnal mixing layer from a ground-based nocturnal inversion. When simulation results are compared with field measurements of the urban plumes leaving St. Louis and Milwaukee, and a power plant within the Milwaukee plume, the predicted concentration profiles of NO(x), SO2 and O3 are found to be in close agreement with the measurement, although agreement with the rate of transformation of SO2 to SO4(2-) is less good. Simulations made for a hypothetical urban location under a range of background concentrations and initial HC concentrations show particulate sulfate concentrations to depend strongly on the HC/NO(x) ratio, indicating that the homogeneous gas-phase transformation may occur at night.

Balko, J. A.↗

NASA NTRS1983

Theoretical study of the AlO blue-green (B2Sigma + - X2Sigma +) band system

Two independent, extensive theoretical calculations are reported for the relative band strengths of the AlO (B2Sigma + - X2Sigma +) blue-green system and for the radiative lifetimes of the lowest few vibrational levels of the B2Sigma(+) state. The theoretical lifetimes, which include a small (less than -.5 percent) contribution from bound-bound transitions into the A2Pi state, are in excellent agreement with laser fluorescence studies. The theoretical lifetimes increase monotonically and very slowly with increasing vibrational quantum number. The relative band strengths for the blue-green system derived from the two theoretical calculations are in excellent agreement, but differ systematically from the relative band strengths of Linton and Nicholls (1969). The present results suggest that their self-absorption corrections are not large enough, resulting in relative intensities that are too large, especially for the weak bands with r centroids less than 1.5 A.

Partridge, H.↗

NASA NTRS1983

Si III line ratios in the sun

New atomic data for Si III have been used to predict level populations and emission-line intensity ratios for electron densities and temperatures appropriate to the solar transition region. The electron impact collision rates used here are substantially larger than those previously published owing to delineation of the complex resonance structures in the low-energy collision strengths. This together with small changes in the spontaneous radiative rates produces significant changes in the calculated intensity ratios. Generally good agreement is found with observations obtained using the Naval Research Laboratory slit spectrograph aboard Skylab, electron densities from three Si III ratios and from other methods normally agreeing to 0.2 dex or better for a wide variety of solar features. For a fourth ratio, incorporating lines with a wide wavelength separation, the agreement is less satisfactory, possibly owing to uncertainties in the observational data.

Dufton, P. L.↗

NASA NTRS1984

Transonic solutions for a multielement airfoil using the full-potential equation

Transonic flow solutions are obtained over a multielement airfoil (augmentor-wing) using the full-potential equation. Solutions obtained for a subcritical case and a strong shock case show good quantitative agreement with experiment in regions not dominated by viscous effects. In those regions where viscous effects are dominant, the results are still in good qualitative agreement. For the strong shock case, Mach number and angle-of-attack corrections were necessary to match experimental coefficient of lift. Typical results from the transonic augmentor-wing Potential Code on the Cray-1S computer require about 10 sec of CPU time for a three-order-of-magnitude drop in the maximum residual. The speed with which solutions can be generated, and the associated low cost, will make this code a practical tool for the design aerodynamicist.

Flores, J.↗

NASA NTRS1984

A flight study of tone radiation patterns generated by inlet rods in a small turbofan engine

This paper presents a flight study of tone radiation patterns from a small turbofan engine and compares results with similar static test stand data and a recently developed radiation theory. An interaction tone was produced by a circumferential array of inlet rods placed just upstream of the fan blades. Overhead and sideline flight directivity patterns showed cut-on of a dominant single mode occurred where predicted and the absence of any other significant circumferential or radial modes. In general, good agreement was found between measured flight and static data, with small differences being attributed to inlet geometry and/or forward speed effects. Good agreement was also obtained between flight data and theory for directivity pattern shape, however, the theory consistently predicted higher values for peak radiation angle over a wide range of frequency.

Preisser, J. S.↗

NASA NTRS1983

Balloon and aircraft measurement of stratospheric sulfate mixing ratio following the El Chichon eruption

Profiles of sulfate mixing ratio versus altitude over the range 15-28 km were obtained from filter samples collected aboard balloons and U-2 aircraft. Observations were made in the summer, fall, and winter following the March-April 1982, El Chichon eruption. Observed sulfate mixing ratios were approximately two orders of magnitude greater than typical background (not volcanically augmented) mixing ratios. The sulfate mixing ratios obtained form the aircraft filter measurements were in good agreement with the results from a wire impactor and a particle counter flown simultaneously. Computations of the amount of sulfate contained in a vertical column of sq m were in agreement with similar calculations from airborne lidar, balloon-borne particle counters, and Solar Mesosphere Explorer satellite radiance retrievals.

Gandrud, B. W.↗

NASA NTRS1983

Space Shuttle, private enterprise and intellectual properties in the context of space manufacturing

It is a national policy to make the capabilities of the Space Transportat ion System available to a wide range of potential users. This includes its availability as a space manufacturing facility for commercial activities, which may be carried out on a reimbursable basis or as a joint endeavor with NASA, but with substantial private investment. In any high risk, long lead-time research and development activity directed towards commercialization, the protection afforded the results of the research and development under the laws relating to intellectual property rights may provide an important incentive for private investment. The paper reviews NASA's policies and practices for the protection of privately-established intellectual property rights involved in STS use, with particular emphasis on reimbursable launch agreements and joint endeavor agreements.

Hosenball, S. N.↗

NASA NTRS1984

The chemical durability of tektites - A laboratory study and correlation with long-term corrosion behavior

Leach tests carried out on tektite specimens (indochinites and australites) under high-dilution conditions show a common behavior characterized by low leach rates (0.00018 g/sq m per d, or 7.2 x 10 to the -12th m/d at 23 C) and an activation energy of (79,600 + or - 700 J/mol). The extent of selective leaching is very small, of the order of 10 to the -8th m. Extrapolation of test results over the lifetime of the tektites gives an excellent agreement with field observations on the extent of corrosion, and this is an important step in establishing the validity of laboratory tests as a basis for the development of models and predictions concerning long-term durabilities at least in the limiting case of high dilution or rapid flow. The results are also shown to be in agreement with various previous observations on the corrosion resistance of tektites. The chemical durability of tektites is observed to be consistent with their composition, highlighting requirements of high corrosion resistance in glasses; these requirements include a silica content in excess of 67 mol percent, an extremely low water content, and an alkali content which is low both absolutely and relative to the di- and poly-valent metal oxide levels. It is shown that artificial glasses which fulfil these criteria are no less corrosion-resistant than the corresponding natural glasses. These conclusions have bearing on the development, as well as on the evaluation, of glasses intended for very long service, such as radioactive waste vitrification media.

Barkatt, A.↗

NASA NTRS1984

Computer simulation of fracture using long range pair potentials

The behavior of a crack in iron is studied using computer simulation. A Morse interatomic potential is used which is of a longer ranged nature than the potentials used in previous studies. With this potential, blunting of the crack tip by spontaneous dislocation nucleation occurs under most conditions. The presence of hydrogen appears to inhibit this blunting and thus to encourage brittle fracture. In the absence of hydrogen, a temperature dependent brittle-ductile transition is observed for some loads. This behavior is quite different from that observed when shorter ranged potentials are used, and it appears to be in somewhat better agreement with experimental results. This agreement with experiment is not conclusive, however, indicating the need for further work to determine more accurate potentials.

Mullins, M.↗

NASA NTRS1984

A finite difference solution for the propagation of sound in near sonic flows

An explicit time/space finite difference procedure is used to model the propagation of sound in a quasi one-dimensional duct containing high Mach number subsonic flow. Nonlinear acoustic equations are derived by perturbing the time-dependent Euler equations about a steady, compressible mean flow. The governing difference relations are based on a fourth-order, two-step (predictor-corrector) MacCormack scheme. The solution algorithm functions by switching on a time harmonic source and allowing the difference equations to iterate to a steady state. The principal effect of the non-linearities was to shift aocustical energy to higher harmonics. With increased source strength, wave steepening was observed. This phenomenon suggests that the acoustical response may approach a shock behavior at higher sound pressure level as the throat Mach number approaches unity. On a peak level basis, good agreement between the nonlinear finite difference and linear finite element solutions was observed, even through a peak sound pressure level of about 150 dB occurred in the throat region. Nonlinear steady state waveform solutions are shown to be in excellent agreement with a nonlinear asymptotic theory. Previously announced in STAR as N83-30167

Hariharan, S. I.↗