Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ASPECT RATIO”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

OECD MCCI Project: 2-D Core Concrete Interaction (CCI) Tests: CCI-5 Quick Look Data Report

Ex-vessel debris coolability is an important light water reactor (LWR) safety issue. For existing plants, resolution of this issue will confirm the technical basis for severe accident management guidelines (SAMGs). For new reactors, understanding this issue will help confirm the effectiveness of the design and implementation of new accident mitigation features and severe accident management design alternatives (SAMDAs). The first OECD-MCCI program conducted reactor material experiments focused on achieving the following technical objectives: i) provide confirmatory evidence for various cooling mechanisms through separate effect tests and data for severe accident code model development, and ii) provide longer-term two-dimensional core-concrete interaction data for code assessment and improvement. At the 3rd PRG Meeting of the MCCI-2 Program, the MB approved activities required to conduct the CCI-5 test with the overall objective of increasing the test section aspect ratio (i.e., test section width/melt depth) to the greatest extent possible to more accurately mock up prototypic conditions. To this end, the project prepared two design documents [3,4] that were submitted to the PRG for review. On this basis, the design was finalized, the apparatus was assembled, and the experiment was conducted on September 25, 2008. Specifications for CCI-5 are provided. The initial corium composition and concrete types are the same as those of CCI-3, but the dimensions and design of the test section are different. In particular, CCI-3 was conducted with a test section that featured two-ablating sidewalls with an initial basemat cross-section of 50 cm x 50 cm, whereas the CCI-5 test section features one ablating concrete sidewall, an opposing MgO refractory sidewall, and a concrete basemat that is initially 50 cm x 79 cm in cross-sectional area. The input power for CCI-5 during the dry ablation phase is specified to be 145 kW, which is based on the requirement of providing an initial ‘prototypic’ heat flux of ~160 kW/m2 across all melt surfaces that are not in contact with insulating sidewall material. This is the same surface heat flux requirement used to specify the total input power for tests CCI-2 through CCI-4. The initial melt depth for CCI-5 is set at 25 cm, which is the same as that used in previous tests. Since the surface area of the CCI-5 basemat is larger than that of previous tests, the initial melt mass to achieve this depth is increased considerably to 590 kg. With these specifications, CCI-5 can be considered a repeat of CCI-3, but with the aspect ratio increased to the greatest extent possible using: i) available hardware and ii) an inert wall that provides a symmetry boundary condition on one side of the test section. The objective of this quick look data report is to provide early thermalhydraulic results from this test. To this end, a summary description of the test apparatus is provided first, followed by descriptions of the test operating procedure and key experiment results. A full length data report that includes the complete set of results of posttest examinations will be provided when that phase of the work is completed.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Magnet Design Considerations for Fusion Nuclear Science Facility

The Fusion Nuclear Science Facility (FNSF) is a nuclear confinement facility that provides a fusion environment with components of the reactor integrated together to bridge the technical gaps of burning plasma and nuclear science between the International Thermonuclear Experimental Reactor (ITER) and the demonstration power plant (DEMO). Compared with ITER, the FNSF is smaller in size but generates much higher magnetic field, i.e., 30 times higher neutron fluence with three orders of magnitude longer plasma operation at higher operating temperatures for structures surrounding the plasma. Input parameters to the magnet design from system code analysis include magnetic field of 7.5 T at the plasma center with a plasma major radius of 4.8 m and a minor radius of 1.2 m and a peak field of 15.5 T on the toroidal field (TF) coils for the FNSF. Both low-temperature superconductors (LTS) and high-temperature superconductors (HTS) are considered for the FNSF magnet design based on the state-of-the-art fusion magnet technology. The higher magnetic field can be achieved by using the high-performance ternary restacked-rod process Nb3Sn strands for TF magnets. The circular cable-in-conduit conductor (CICC) design similar to ITER magnets and a high-aspect-ratio rectangular CICC design are evaluated for FNSF magnets, but low-activation-jacket materials may need to be selected. The conductor design concept and TF coil winding pack composition and dimension based on the horizontal maintenance schemes are discussed. Neutron radiation limits for the LTS and HTS superconductors and electrical insulation materials are also reviewed based on the available materials previously tested. The material radiation limits for FNSF magnets are defined as part of the conceptual design studies for FNSF magnets.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Evolution of TiS and TiN in Fe-40 MassPctNi Austenitic Alloy During Heating at 1273 K (1000 °C)

Evolution of TiS in composition and morphology as well as the change in size distribution of TiS and TiN in Fe-40 masspctNi austenitic alloy during heating at 1273 K (1000 °C) was investigated using manual/automatic scanning electron microscopy energy-dispersive X-ray spectroscopy (SEM/EDS). Two types of TiS morphologies, spindle and spherical, were maintained during heating. The molar ratio of Ti/S of TiS increased while the aspect ratio of TiS was maintained in both alloys during heating. The number density of TiN inclusions was low compared with TiS in each alloy during heating. The pinning effect of TiS during heating was confirmed, and was stronger in alloy with a larger volume fraction of TiS. The results contribute to the establishment of optimum heat treatment processes for austenitic stainless steel to obtain better pitting corrosion resistance.

36 MATERIALS SCIENCE↗

Parametric Study of Cyclic Plasticity Behavior in a Directionally Solidified Superalloy with Partial Recrystallization by Crystal Plasticity Finite Element Simulation

To understand the influence of recrystallization on the low-cycle fatigue behavior of directionally solidified nickel-based DZ4 superalloy, crystal plasticity-based finite element (CPFE) analysis was carried out to study the cyclic plastic behaviors. Using the design of experiments (DOE) technique, a series of CPFE simulations were designed and performed for DZ4 superalloy with recrystallized grains to examine the cyclic plastic shear deformation at the carbide/matrix interface, at the recrystallized grain boundary/matrix, and in the matrix. Seven influence factors, i.e., applied strain, strain ratio, carbide modulus, dwell time, misorientation angle, carbide aspect ratio, and carbide size, were considered, and the effects of which were quantitatively evaluated by the maximum accumulated plastic shear strains via CPFE-based DOE analysis. The results showed that carbide and recrystallized grain boundary had competitively significant effects on fatigue crack initiation. Applied strain was the most influential parameter among all the studied parameters.

36 MATERIALS SCIENCE↗

WIDE BINARY EFFECTS ON ASYMMETRIES IN ASYMPTOTIC GIANT BRANCH CIRCUMSTELLAR ENVELOPES

Observations of increasingly higher spatial resolution reveal the existence of asymmetries in the circumstellar envelopes of a small fraction of asymptotic giant branch (AGB) stars. Although there is no general consensus for their origin, a binary companion star may be responsible. Within this framework, we investigate the gravitational effects associated with a sufficiently wide binary system, where Roche lobe overflow is unimportant, on the outflowing envelopes of AGB stars using three-dimensional hydrodynamic simulations. The effects due to individual binary components are separately studied, enabling the investigation of the stellar and circumstellar characteristics in detail. The reflex motion of the AGB star alters the wind velocity distribution, thereby determining the overall shape of the outflowing envelope. On the other hand, the interaction of the companion with the envelope produces a gravitational wake, which exhibits a vertically thinner shape. The two patterns overlap and form clumpy structures. To illustrate the diversity of shapes, we present the numerical results as a function of inclination angle. Not only is spiral structure produced by the binary interaction, but arc patterns are also found that represent the former structure when viewed at different inclinations. The arcs reveal a systematic shift of their centers of curvature for cases when the orbital speed of the AGB star is comparable to its wind speed. They take on the shape of a peanut for inclinations nearly edge-on. In the limit of slow orbital motion of the AGB star relative to the wind speed, the arc pattern becomes nearly spherically symmetric. We find that the aspect ratio of the overall oblate shape of the pattern is an important diagnostic probe of the binary as it can be used to constrain the orbital velocity of the AGB star, and moreover, the binary mass ratio.

79 ASTRONOMY AND ASTROPHYSICS↗

Impact of punctual flat magnetic shear on the field line transport

We investigate the magnetic field line transport for tokamak equilibria with monotonic magnetic shear perturbed by resonant fields. We show that when the local profile is flat at the plasma edge a transport barrier can be created leading to a field line transport reduction. This transport reduction is due to the field lines topological modifications, caused by a local flattened profile that reduces the global field lines escape pattern. The results are obtained by applying a symplectic map that describes perturbed magnetic field lines in large aspect ratio tokamaks.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Self-assembly and magnetic properties of MnAs nanowires on GaAs(001) substrate

The in-plane aligned MnAs nanowires have been grown by molecular-beam epitaxy on GaAs(001) substrates at high growth temperature ({>=}450 deg. C). A discontinuous growth with break intervals (50 s' interval per 10 s' growth) was employed. The obtained nanowires were identified to be mainly type-B hexagonal MnAs. The influences of growth temperature and As{sub 4}/Mn flux ratio on the nanowires' morphology were investigated. Both high growth temperature and high As{sub 4}/Mn flux ratio are necessary for the growth of uniaxially aligned MnAs nanowires with high aspect ratio. The magnetic anisotropy of the nanowires and their multimodal size distributions contribute to the large coercivity and special shape of the M-H loops along the magnetic easy axis, which is [1102]MnAs||[110]GaAs. However, the longer growth time would lead to the both azimuthal alignments of the MnAs wires and the weakening of the magnetic anisotropy.

36 MATERIALS SCIENCE↗

Metal hydride heat exchanger and method of use

A heat exchanger incorporates a metal hydride heat exchanger and mitigates the fluid mixing process, and thus greatly improves the heat transfer efficiency and heat recovery processes. The metal hydride heat exchanger has a container for the metal hydride that has a large aspect ratio. A plurality of high aspect container for the metal hydride may be coupled with a manifold.

Bahar, Bamdad↗

How empty are disk gaps opened by giant planets?

Gap clearing by giant planets has been proposed to explain the optically thin cavities observed in many protoplanetary disks. How much material remains in the gap determines not only how detectable young planets are in their birth environments, but also how strong co-rotation torques are, which impacts how planets can survive fast orbital migration. We determine numerically how the average surface density inside the gap, Σ{sub gap}, depends on planet-to-star mass ratio q, Shakura-Sunyaev viscosity parameter α, and disk height-to-radius aspect ratio h/r. Our results are derived from our new graphics processing unit accelerated Lagrangian hydrodynamical code PEnGUIn and are verified by independent simulations with ZEUS90. For Jupiter-like planets, we find Σ{sub gap}∝q {sup –2.2}α{sup 1.4}(h/r){sup 6.6}, and for near brown dwarf masses, Σ{sub gap}∝q {sup –1}α{sup 1.3}(h/r){sup 6.1}. Surface density contrasts inside and outside gaps can be as large as 10{sup 4}, even when the planet does not accrete. We derive a simple analytic scaling, Σ{sub gap}∝q {sup –2}α{sup 1}(h/r){sup 5}, that compares reasonably well to empirical results, especially at low Neptune-like masses, and use discrepancies to highlight areas for progress.

79 ASTRONOMY AND ASTROPHYSICS↗

Analytic expression for poloidal flow velocity in the banana regime

The poloidal flow velocity in the banana regime is calculated by improving the l = 1 approximation for the Fokker-Planck collision operator [M. Taguchi, Plasma Phys. Controlled Fusion 30, 1897 (1988)]. The obtained analytic expression for this flow, which can be used for general axisymmetric toroidal plasmas, agrees quite well with the recently calculated numerical results by Parker and Catto [Plasma Phys. Controlled Fusion 54, 085011 (2012)] in the full range of aspect ratio.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The residual zonal flow in tokamak plasmas toroidally rotating at arbitrary velocity

Zonal flows, initially driven by ion-temperature-gradient turbulence, may evolve due to the neoclassic polarization in a collisionless tokamak plasma. In our previous work [D. Zhou, Nucl. Fusion 54, 042002 (2014)], the residual zonal flow in a tokamak plasma rotating toroidally at sonic speed is found to have the same form as that of a static plasma. In the present work, the form of the residual zonal flow is presented for tokamak plasmas rotating toroidally at arbitrary velocity. The gyro-kinetic equation is analytically solved for low speed rotation to give the expression of residual zonal flows, and the expression is then generalized for cases with arbitrary rotating velocity through interpolation. The zonal flow level decreases as the rotating velocity increases. The numerical evaluation is in good agreement with the former simulation result for high aspect ratio tokamaks.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The Effects of Shallow Cumulus Cloud Shape on Interactions Among Clouds and Mixing With Near-Cloud Environments

Cloud lifecycles are influenced by interactions among clouds and mixing with cloud-free environments. Cloud shapes dictate the length of cloud boundaries, which affects these interactions. This study uses a large eddy simulation to examine the relationships between the shallow cumulus cloud shapes, processes at their boundaries, and lifecycles. To characterize the shape of clouds, two metrics are newly defined: one reflects the overall horizontal cloud shape, and the other defines the cloud edge irregularity. Simulated clouds experience increased irregularity, but little changes in aspect ratio. Irregularity-driven cloud perimeter growth strongly indicates cloud splitting, with a more pronounced effect than aspect ratio-driven perimeter growth. Smaller cloud-shell gradients of properties across cloud boundaries are associated with more irregular clouds, suggesting enhanced mixing of clouds with the cloud-free environment. These findings indicate that the shallow cumulus evolution is partly driven by the irregularity of the cloud edge through lateral mixing and cloud splitting.

54 ENVIRONMENTAL SCIENCES↗

Drifts of electron orbits induced by toroidal electric field in tokamaks

The drifts of electron orbits induced by the toroidal electric field in tokamaks are analyzed. Based on the relativistic Hamiltonian equations for guiding centre motion, the formula for the drift velocity v{sub dr} is derived. It describes the outward drift of passing particles as well as the inward drift (the Ware pinch) of trapped particles. Unlike the approximate formula for v{sub dr} given in Guan et al. [Phys. Plasmas 17, 092502 (2010)] for circular electron orbits, it describes qualitatively new features of the outward drift of electron orbits. Particularly, the new formula describes the evolution of the orbit's shape, the formation of X-point and the associated separatrix. It is shown that the outward drift velocity is proportional to the inverse aspect ratio of tokamaks.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Wall pressure exerted by hydrogenation of sodium aluminum hydride.

Wall pressure exerted by the bulk expansion of a sodium aluminum hydride bed was measured as a function of hydrogen content. A custom apparatus was designed and loaded with sodium alanates at densities of 1.0, 1.1, and 1.16 g/cc. Four complete cycles were performed to identify variations in measured pressure. Results indicated poor correlation between exerted pressure and hydrogen capacity of the sodium alanate beds. Mechanical pressure due to the hydrogenation of sodium alanates does not influence full-scale system designs as it falls within common design factors of safety. Gas pressure gradients within the porous solid were identified and may limit reaction rates, especially for high aspect ratio beds.

08 HYDROGEN↗

The silver nanowires synthesized using different molecule weight of polyvinyl pyrrolidone for controlling diameter and length by one-pot polyol method

In this paper, we report our investigation on the effect of the molecular weight and molar ratio of polyvinyl pyrrolidone (PVP) and silver nitrate (AgNO{sub 3}) for controlling diameter and length of the silver nanowires synthesized with a high-aspect-ratio. The silver nanowires synthesized by one-pot polyol method at a constant temperature oil bath of 130°C. Different molecule weights of PVP, i.e. 55 K, 360 K, and 1300 K were used combined with different molar ratios of [PVP:Ag]. The UV–vis spectrophotometry and Field-emission scanning electron microscopy (FE-SEM) were employed to characterize the silver nanowires. The results show that the molecular weight and molar ratio of [PVP:Ag] are very important for controlling growth and properties of the silver nanowires. The diameter and length of silver nanowires are obtained 80 to 140 nm and 30 to 70 µm, respectively. The higher molecular weight of PVP, the greater diameter and length of silver nanowires.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

A method to measure nanomechanical properties of biological objects

We postulate that one will be able to quantitatively infer changes in the mechanical properties of proteins, cells, and other biological objects (BO) by measuring the shifts of several thermally excited resonance frequencies of atomic force microscopy cantilevers in contact with BOs. Here, we provide a method to extract spring constants and molecular damping factors of BOs in biologically relevant phosphate buffered saline medium and using compliant AFM cantilevers with a small aspect ratio (a ratio of length to width)

36 MATERIALS SCIENCE↗

Robustness to hydrodynamic instabilities in indirectly driven layered capsule implosions

Here, we report on a high convergence ratio liquid layer capsule implosion performed on the National Ignition Facility and contrast it to two previously reported layered implosions, in order to better understand how the capsule design impacts the hydrodynamic stability properties of implosions. Three implosions were performed with similar convergence ratios, fuel entropy, in-flight aspect ratios, and unablated shell mass; these qualities are important for determining hydrodynamic stability. Nevertheless, while two of these implosions exhibited robustness to asymmetries, including our recent experiment that had abnormally large amplitude long-wavelength capsule asymmetries, and produced more than 80% or the yield predicted by one-dimensional (1D) simulations, which do not account for the impacts of hydrodynamic instabilities, the third implosion produced only 14% of the yield from a 1D simulation. We perform a detailed computational analysis of these three shots, which suggests that the combination of several large asymmetry seeds result in the significantly degraded performance: a large 30 μm fill tube, the presence of a microstructure in the high density carbon ablator, and a higher level of drive asymmetry. This indicates that while it is possible to stabilize a high convergence ratio implosion through various means, the factors that determine stability cannot be considered independently. Furthermore, when these asymmetries are combined in 2D simulations, they can exhibit destructive interference and underpredict the yield degradation compared to experiment and three-dimensional simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Research three-dimensional hierarchical graphite architectures for anodes for fast charging

With current lithium ion batteries optimized for performance under relatively low charge rate conditions, implementation of XFC has been hindered by drawbacks including Li plating, kinetic polarization, and heat dissipation. This project will utilize model-informed design of 3-D hierarchical electrodes to tune key XFC related variables like 1) bulk porosity/tortuosity 2) vertical pore diameter, spacing, and lattice 3) crystallographic orientation of graphite particles relative to exposed surfaces 4) interfacial chemistry of the graphite surfaces through "artificial sEr formation using ALD 5) current collector surface roughness (aspect ratio, roughness factor, etc.). A key aspect of implementing novel electrodes is characterizing them in relevant settings. For this project, ultimately led out of University of Michigan by Neil Dasgupta, that includes both coin cell and 2+ Ah pouch cell testing, as well as comparison testing against baselines. Sandia National Labs will be conducting detailed cell characterization on iterative versions/improvements of the model-based hierarchical electrodes, as well as COTS cells for baseline comparisons. Key metrics include performance under fast charge conditions, as well as the absence or degree of lithium plating. Sandia will use their unique high precision cycling and rapid EIS capabilities to accurately characterize performance and any lithium plating during 6C charging and beyond, coupling electrochemical observations with cell teardown. Sandia will also design custom fixturing to cool cells during rapid charge, to decouple any kinetic effects brought about by cell heating and allow comparisons between different cells and charge rates. Using these techniques, Sandia will assess HOH electrodes from the University of Michigan, as well as aiding in iterative model and electrode design.

25 ENERGY STORAGE↗