Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “AG”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

The valence band structure of Ag{sub x}Rh{sub 1–x} alloy nanoparticles

The valence band (VB) structures of face-centered-cubic Ag-Rh alloy nanoparticles (NPs), which are known to have excellent hydrogen-storage properties, were investigated using bulk-sensitive hard x-ray photoelectron spectroscopy. The observed VB spectra profiles of the Ag-Rh alloy NPs do not resemble simple linear combinations of the VB spectra of Ag and Rh NPs. The observed VB hybridization was qualitatively reproduced via a first-principles calculation. The electronic structure of the Ag{sub 0.5}Rh{sub 0.5} alloy NPs near the Fermi edge was strikingly similar to that of Pd NPs, whose superior hydrogen-storage properties are well known.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Temperature dependence of exciton-surface plasmon polariton coupling in Ag, Au, and Al films on In{sub x}Ga{sub 1−x}N/GaN quantum wells studied with time-resolved cathodoluminescence

The optical properties and coupling of excitons to surface plasmon polaritons (SPPs) in Ag, Au, and Al-coated In{sub x}Ga{sub 1−x}N/GaN multiple and single quantum wells (SQWs) were probed with time-resolved cathodoluminescence. Excitons were generated in the metal coated SQWs by injecting a pulsed high-energy electron beam through the thin metal films. The Purcell enhancement factor (F{sub p}) was obtained by direct measurement of changes in the temperature-dependent radiative lifetime caused by the SQW exciton-SPP coupling. Three chosen plasmonic metals of Al, Ag, and Au facilitate an interesting comparison of the exciton-SPP coupling for energy ranges in which the SP energy is greater than, approximately equal to, and less than the excitonic transition energy for the InGaN/GaN QW emitter. A modeling of the temperature dependence of the Purcell enhancement factor, F{sub p}, included the effects of ohmic losses of the metals and changes in the dielectric properties due to the temperature dependence of (i) the intraband behavior in the Drude model and (ii) the interband critical point transition energies which involve the d-bands of Au and Ag. We show that an inclusion of both intraband and interband effects is essential when calculating the ω vs k SPP dispersion relation, plasmon density of states (DOS), and the dependence of F{sub p} on frequency and temperature. Moreover, the “back bending” in the SPP dispersion relation when including ohmic losses can cause a finite DOS above ω{sub sp} and lead to a measurable F{sub p} in a limited energy range above ω{sub sp}, which can potentially be exploited in plasmonic devices utilizing Ag and Au.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of Ag doping concentration on structural and optical properties of CdS thin film

This work shows the influence of Ag concentration on structural properties of pulsed laser deposited nanocrystalline CdS thin film. X-ray photoelectron spectroscopy (XPS) studies confirm the dopant concentration in CdS films and atomic concentration of elements. XPS studies show that the samples are slightly sulfur deficient. GAXRD scan reveals the structural phase transformation from cubic to hexagonal phase of CdS without appearance of any phase of CdO, Ag{sub 2}O or Ag{sub 2}S suggesting the substitutional doping of Ag ions. Photoluminescence studies illustrate that emission intensity increases with increase in dopant concentration upto 5% and then decreases for higher dopant concentration.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Atomic-scale investigation of interface-facilitated deformation twinning in severely deformed Ag-Cu nanolamellar composites

We report an atomic-scale investigation of interface-facilitated deformation twinning behaviour in Ag-Cu nanolamellar composites. Profuse twinning activities in Ag supply partial dislocations to directly transmit across the Ag-Cu lamellar interface that promotes deformation twinning in the neighbouring Cu lamellae although the interface is severely deformed. The trans-interface twin bands change the local structure at the interface. Our analysis suggests that the orientation relationship and interfacial structure between neighbouring Ag-Cu lamellae play a crucial role in such special interface-facilitated twinning behaviour.

36 MATERIALS SCIENCE↗

Localized surface plasmon behavior of Ag-Cu alloy nanoparticles stabilized by rice-starch and gelatin

The purpose of this communication was to understand localized surface plasmon behavior of a series of Ag-Cu alloy nanoparticles capped by rice-starch and gelatin. The structures of dried powders were investigated with the help of X-ray diffraction. The analysis revealed Ag-rich and Cu-rich phases with maximum solid solubility of Cu ∼9 atom per cent; 8 atom per cent and Ag ∼ 16 atom per cent; 14 atom per cent in rice-starch and gelatin capped samples respectively. Transmission electron microscope was used for knowing the particle size as well as to supplement FCC phase formations of Ag-rich and Cu-rich solid phases arrived at based on X-ray diffraction studies. The UV-Vis spectra of sols were examined for the formation and stability of alloy nanoparticles. The temporal evolution of LSPR curves gave us to assert that the sol is stable for more than two months. Small angle X-ray scattering in the sol state was extensively utilized to understand nature of suspensions in terms of fractals. Such a study is important for having a correlation between LSPR behaviors with those of nanoparticle dispersion in aqueous media. It is believed that this work will be a contribution to the emerging field of plasmonics that include applications in the area of photophysical processes and photochemical reactions.

36 MATERIALS SCIENCE↗

Preparation and characterization of double layer thin films ZnO/ZnO:Ag for methylene blue photodegradation

Double layer (DL) thin films of zinc oxide and silver-doped zinc oxide (ZnO/ZnO:Ag) were deposited on glass substrate by sol-gel spray coating technique. The prepared thin films were subjected for optical and photocatalytic studies. UV-visible transmission spectra shows that the subtitution of Ag in ZnO leads to band gap reduction. The influence of Ag doping on the photocatalytic activity of ZnO for the degradation of methylene blue dye was studied under solar radiation. The light absorption over an extended visible region by Ag ion doping in ZnO film contributed equally to improve the photocatalytic activity up to 98.29%.

36 MATERIALS SCIENCE↗

Study of structural modification of PVA by incorporating Ag nanoparticles

Nanocomposites of PVA with Ag nanoparticles dispersed in it were synthesized using solution casting method. The morphology and size distribution of Ag nanoparticles embedded in PVA matrix were obtained by transmission electron microscopy (TEM) and Field emission scanning electron microscopy (FE-SEM). Raman spectroscopy was used to examine structural changes taking place inside polyvinyl alcohol (PVA) matrix due to incorporation of Ag nanoparticle. Raman analysis indicates that Ag nanoparticles interact with PVA through H-bonding.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Chemical synthesis and characterization of PdTe-Ag{sub 2}Te nanowires heterostructure

Ag{sub 2}Te and Pd doped Ag{sub 2}Te nanowires are synthesized using chemical route. Field Emission Scanning Electron Microscopy (FESEM) shows the presence of nanowires of nearly few micron length and ~ 200 nm diameter. The composition analysis performed using Electron Dispersive Spectroscopy (EDS) shows the presence of almost 1.98 at% palladium. Reitveld refinement of X-ray diffraction (XRD) shows the presence of 0.3 % of PdTe phase in addition to Ag{sub 2}Te in Pd doped Ag{sub 2}Te sample.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Dry-growth of silver single-crystal nanowires from porous Ag structure

A fabrication method of single crystal Ag nanowires in large scale is introduced without any chemical synthesis in wet processes, which usually generates fivefold twinned nanowires of fcc metals. Dense single-crystal nanowires grow on a mechanically polished surface of micro-porous Ag structure, which is created from Ag micro-particles. The diameter and the length of the nanowires can be controlled simply by changing the temperature and the time of the heating during the nanowire growth in air. Unique growth mechanism is described in detail, based on stress-induced migration accelerated by the micro-porous structure where the origin of Ag nanowires growth is incubated. Transmission electron microscopy analysis on the single crystal nanowires is also presented. This simple method offered an alternative preparation for metallic nanowires, especially with the single crystal structure in numerous applications.

36 MATERIALS SCIENCE↗

High-pressure characterization of Ag 3 AuTe 2 : Implications for strain-induced band tuning

Recent band structure calculations have suggested the potential for band tuning in the chiral semiconductor Ag 3 AuTe 2 to zero upon application of negative strain. In this study, we report on the synthesis of polycrystalline Ag 3 AuTe 2 and investigate its transport and optical properties and mechanical compressibility. Transport measurements reveal the semiconducting behavior of Ag 3 AuTe 2 with high resistivity and an activation energy E a of 0.2 eV. The optical bandgap determined by diffuse reflectance measurements is about three times wider than the experimental E a ⁠. Despite the difference, both experimental gaps fall within the range of predicted bandgaps by our first-principles density functional theory (DFT) calculations employing the Perdew–Burke–Ernzerhof and modified Becke–Johnson methods. Furthermore, our DFT simulations predict a progressive narrowing of the bandgap under compressive strain, with a full closure expected at a strain of –4% relative to the lattice parameter. To evaluate the feasibility of gap tunability at such substantial strain, the high-pressure behavior of Ag 3 AuTe 2 was investigated by in situ high-pressure x-ray diffraction up to 47 GPa. Mechanical compression beyond 4% resulted in a pressure-induced structural transformation, indicating the possibility of substantial gap modulation under extreme compression conditions.

36 MATERIALS SCIENCE↗

Adsorption of Ag, Au, Cu, and Ni on MoS 2 : theory and experiment

Abstract Here, we present results of a computational and experimental study of adsorption of various metals on MoS2. In particular, we analyzed the binding mechanism of four metallic elements (Ag, Au, Cu, Ni) on MoS2. Among these elements, Ni exhibits the strongest binding and lowest mobility on the surface of MoS2. On the other hand, Au and Ag bond very weakly to the surface and have very high mobilities. Our calculations for Cu show that its bonding and surface mobility are between these two groups. Experimentally, Ni films exhibit a composition characterized by randomly oriented nanoscale clusters. This is consistent with the larger cohesive energy of Ni atoms as compared with their binding energy with MoS2, which is expected to result in 3D clusters. In contrast, Au and Ag tend to form atomically flat plateaued structures on MoS2, which is contrary to their larger cohesive energy as compared to their weak binding with MoS2. Cu displays a surface morphology somewhat similar to Ni, featuring larger nanoscale clusters. However, unlike Ni, in many cases Cu exhibits small plateaued surfaces on these clusters. This suggests that Cu likely has two competing mechanisms that cause it to span the behaviors seen in the Ni and Au/Ag film morphologies. These results indicate that calculations of the initial binding conditions could be useful for predicting film morphologies. In addition, out calculations show that the adsorption of adatoms with odd electron number like Ag, Au, and Cu results in 100% spin-polarization and integer magnetic moment of the system. Adsorption of Ni adatoms, with even electron number, does not induce a magnetic transition.

Harms, Haley↗

Integration of Ag-CBRAM crossbars and Mott ReLU neurons for efficient implementation of deep neural networks in hardware

In-memory computing with emerging non-volatile memory devices (eNVMs) has shown promising results in accelerating matrix-vector multiplications. However, activation function calculations are still being implemented with general processors or large and complex neuron peripheral circuits. Here, we present the integration of Ag-based conductive bridge random access memory (Ag-CBRAM) crossbar arrays with Mott rectified linear unit (ReLU) activation neurons for scalable, energy and area-efficient hardware (HW) implementation of deep neural networks. We develop Ag-CBRAM devices that can achieve a high ON/OFF ratio and multi-level programmability. Compact and energy-efficient Mott ReLU neuron devices implementing ReLU activation function are directly connected to the columns of Ag-CBRAM crossbars to compute the output from the weighted sum current. We implement convolution filters and activations for VGG-16 using our integrated HW and demonstrate the successful generation of feature maps for CIFAR-10 images in HW. Our approach paves a new way toward building a highly compact and energy-efficient eNVMs-based in-memory computing system.

Mott insulators↗

Time-resolved Fourier-transform infrared emission spectroscopy of Ag in the (1300-3600)-cm{sup -1} region: Transitions involving f and g states and oscillator strengths

We report on a study of the emission spectra of Ag vapor in a vacuum (10{sup -2} Torr) formed in ablation of an Ag metal target by a high-repetition rate (1.0 kHz) pulsed nanosecond ArF laser ({lambda}=193 nm, output energy of 15 mJ). The time-resolved infrared emission spectrum of Ag was recorded in the 1300- to 3600-cm{sup -1} spectral region using the Fourier transform infrared spectroscopy technique with a resolution of 0.02 cm{sup -1}. The time profiles of the measured lines have maxima at 5-6 {mu}s after a laser shot and display nonexponential decay with a decay time of 3-7 {mu}s. The lines reported here are given with an uncertainty of 0.0005-0.016 cm{sup -1}. The line classification is performed using relative line strengths expressed in terms of transition dipole matrix elements calculated with the help of the Fues model potential; these calculations show agreement with the large experimental and calculated data sets available in the literature. In addition to these data we also calculate transition probabilities and line and oscillator strengths for a number of transitions in the 1300- to 5000-cm{sup -1} range between (4d{sup 10})nl{sub j} states of Ag.

74 ATOMIC AND MOLECULAR PHYSICS↗

Static and dynamic spin properties in the quantum triangular lattice antiferromagnet Ag 2 CoO 2

In Ag 2 CoO 2 , Co forms triangular lattice layers, which are separated by the metallic (Ag 2 ) block. The magnetic susceptibility and heat capacity measurements show that this material exhibits an antiferromagnetic transition at T N =17.5 K and the Weiss temperature (T Θ ) and the effective moment are -274 K and 1.62μ B , respectively, indicating that the Co ion carries spin (S) 1/2 and has a strongly frustrated state with T Θ /T N =15.7. A density functional theory calculation confirmed that the valence state of the Co ions is 2+ and the low-spin state with S=1/2 is realized at reduced on-site Coulomb interaction on Co. We performed elastic and inelastic neutron scattering experiments in a powder sample of Ag 2 CoO 2 . Although no noticeable magnetic Bragg peaks were observed below T N , distinct magnetic excitations were observed in the inelastic neutron scattering experiments. The excitations are consistent with those expected for the S=1/2 Heisenberg triangular lattice antiferromagnet. These results suggest that the ordered moment is reduced due to the quantum effect, which explains the absence of the magnetic Bragg peaks. Our results thus suggest that Ag 2 CoO 2 is a good candidate to realize a quantum Heisenberg triangular lattice antiferromagnet.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Oligoethylene-bridged diferrocene on Ag(110): Monolayer structures and adsorbate-induced faceting

The self-assembly of a ferrocene (Fc) derivative, oligoethylene-bridged diferrocene (diFc), Fc(CH{sub 2}){sub 14}Fc, on Ag(110) surface has been investigated by scanning tunneling microscopy (STM) under ultrahigh vacuum. Three ordered structures, the majority {beta} and the minorities {alpha} and {gamma}, are formed at monolayer coverage. In {alpha} and {gamma}, a unit cell contains one molecule and the molecules are parallel to each other so that the distances between Fc groups and between oligoethylene chains are reduced. A unit cell contains five molecules in {beta}: four of them are parallel to each other but not parallel to the fifth. The interaction between diFc and Ag(110), which is relatively strong in comparison to the intermolecular interaction, is dominant for the assembly of the ordered structures. The adsorption of diFc molecules induces the reorganization of substrate steps, which prefer to follow the directions of the superstructure lattice vectors, i.e. ({+-}1,2) and ({+-}3,2) of the Ag(110) surface. The (12 13-1) facet is formed due to step bunching at regions with high step density. By using in situ STM, the process of step reorganization and faceting has been observed in real time. It is concluded that the Ag adatoms play a key role on the substrate reorganization.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Irradiation-induced Ag nanocluster nucleation in silicate glasses: Analogy with photography

The synthesis of Ag nanoclusters in soda lime silicate glasses and silica was studied by optical absorption and electron spin resonance experiments under both low (gamma ray) and high (MeV ion) deposited energy density irradiation conditions. Both types of irradiation create electrons and holes whose density and thermal evolution--notably via their interaction with defects--are shown to determine the clustering and growth rates of Ag nanocrystals. We thus establish the influence of redox interactions of defects and silver (poly)ions. The mechanisms are similar to the latent image formation in photography: Irradiation-induced photoelectrons are trapped within the glass matrix, notably on dissolved noble metal ions and defects, which are thus neutralized (reverse oxidation reactions are also shown to exist). Annealing promotes metal atom diffusion, which, in turn, leads to cluster nuclei formation. The cluster density depends not only on the irradiation fluence but also--and primarily--on the density of deposited energy and the redox properties of the glass. Ion irradiation (i.e., large deposited energy density) is far more effective in cluster formation, despite its lower neutralization efficiency (from Ag{sup +} to Ag{sup 0}) as compared to gamma photon irradiation.

36 MATERIALS SCIENCE↗

Electronic inhomogeneity and Ag:Sb imbalance of Ag1-yPb18/207Sb1+zTe20 high-performance thermoelectrics elucidated by 125Te and 207Pb NMR

Using magic-angle spinning {sup 125}Te and {sup 207}Pb NMR, we have discovered the presence of two phases of approximately tenfold different free-electron concentration, n, in high-performance thermoelectrics Ag{sub 1?y}Pb{sub 18}Sb{sub 1+z}Te{sub 20} (LAST-18), proven by pairs of Knight-shifted NMR peaks and biexponential spin-lattice relaxation. The ratio of the phases is typically 2:1 with n {approx} 2 x 10{sup 19} cm{sup -3} and 0.2 x 10{sup 19} cm{sup -3}, respectively, determined from the spin-lattice relaxation times. {sup 125}Te NMR spectra show that both phases contain similar concentrations of Sb. The low-n component is assigned to Ag-rich regions with Ag-Sb pairing (but not AgSbTe{sub 2}), the dominant high-n component to PbTe:Sb resulting from the excess of Sb relative to Ag. The electronic inhomogeneity observed here must be considered in the search for a better understanding of high-performance thermoelectric materials.

36 MATERIALS SCIENCE↗

Valence band structure of the icosahedral Ag-In-Yb quasicrystal

The valence band structure of the icosahedral (i) Ag-In-Yb quasicrystal, which is isostructural to the binary i-Cd-Yb system, is investigated by ultraviolet photoemission spectroscopy (UPS). Experimental results are compared with electronic-structure calculations of a cubic approximant of the same phase. UPS spectra from the fivefold, threefold, and twofold i-Ag-In-Yb surfaces reveal that the valence band near to the Fermi level is dominated by Yb 4f-derived states, in agreement with calculations. The spectra also exhibit peaks which are surface core level shifted, caused by changes in the electronic structure in surface layers. Calculations yield a pseudogap in the density of states due to a hybridization of the Yb 5d band with the Ag 5p and In 5p bands. Both experimental and calculated band features are very similar to those of Cd-Yb. The modification of the band structure after surface treatment by sputtering and by oxidation is also studied. Additionally, the work function of i-Ag-In-Yb measured from the width of UPS spectrum is found to be almost unaffected by surface orientation, but increases after sputtering or oxidation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗