Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ADSORPTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Energetics of Ag Adsorption on and Adhesion to Rutile TiO 2 (100) Studied by Microcalorimetry

The adsorption and adhesion energies of vapor-deposited Ag on rutile TiO 2 (100) films have been measured using single crystal adsorption calorimetry (SCAC) and He + low energy ion scattering spectroscopy (LEIS). Ag grows as three-dimensional (3D) nanoparticles at 300 and 100 K. The saturation particle density is 8 × 10 16 particles/m 2 at 300 K and 2.5 × 10 17 particles/m 2 at 100 K. The differential heat of adsorption starts low, increases with Ag coverage, and finally approaches the sublimation enthalpy of Ag at both 300 and 100 K. At 300 K, the differential heat of adsorption starts from 208 kJ/mol and rises rapidly to 265 kJ/mol by 1 ML. At 100 K, Ag grows nanoparticles with smaller particle size on the terraces, while at 300 K, the Ag nanoparticles have bigger particle size and grow on step edges with stronger binding strength to the nanoparticles. Thus, the heat of Ag adsorption at 100 K starts at 141 kJ/mol (near the monomer size limit on terrace sites) and remains lower than that at 300 K until 1.5 ML. Here, the adhesion energy of Ag(solid) to rutile TiO 2 (100) is found to be large (~2.44 J/m 2 ), supporting a trend of decreasing adhesion energy with the enthalpy of oxide reduction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of Flexibility in Molecular Simulations of Carbon Dioxide Adsorption and Diffusion in a Cuprous Triazolate Framework

Using fixed atom force fields to model gas adsorption in flexible metal organic frameworks (MOFs) is known to pose difficulties in accurately reproducing and predicting experimental results. This paper studies the difference in accuracy between flexible and fixed atom force fields in reproducing CO 2 adsorption measurements in MAF-2 ([Cu(etz)]∞ (MAF-2, Hetz) 3,5-diethyl-1,2,4-triazole), an NbO-type triazolate scaffold with a bcu cavity system and attached ethyl groups. The flexible force field used to run the hybrid molecular dynamics and grand canonical Monte Carlo calculations were generated using the QuickFF software incorporating van der Waals parameters from the Universal Force Field (UFF) and density derived electrostatic and chemical (DDEC) charges. The fixed atom force field used was composed of UFF van der Waals parameters together with DDEC charges. The calculations were run at 298 K and at pressures of 0.1, 0.3, 0.5, 0.8, and 1 bar. It was observed that for this MOF the rigid force field overpredicted gas adsorption, whereas the flexible force field values closely matched experimental data. In the flexible structure, the freely moving ethyl groups of MAF-2 hindered adsorption, reducing the interaction energy between CO 2 and the N atoms of the triazolate framework as well as reducing the size of the largest cavity diameter. Here, the combination of these factors led to improved prediction of adsorption values with the flexible forcefield as compared to the rigid forcefield, demonstrating the need for modeling MOFs in a way more indicative of their behavior.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

CO Adsorption on Au Nanoparticles Grown on Hexagonal Boron Nitride/Rh(111)

CO adsorption on size-controlled Au nanoparticles grown on an $h$-BN/Rh(111) nanomesh surface has been examined to probe their potential catalytic properties. A combination of high-resolution electron energy loss spectroscopy (HREELS), temperature-programmed desorption (TPD), and density functional theory (DFT) calculations demonstrate that the CO adsorption strength depends heavily on the Au deposition coverage and particle morphology. Particles resulting from low Au coverages deposited at the liquid nitrogen temperature exhibit significantly enhanced CO binding relative to bulk crystalline Au. The resulting CO TPD spectra, and the significantly red-shifted C–O stretching frequency and negative charging of the Au nanoparticles as evidenced by HREELS and DFT, all correspond to those reported for catalytically active Au nanoparticles grown on reactive metal oxides, even though the h-BN/Rh(111) surface is free of carbon, oxygen, or defects. DFT modeling further suggests that the enhanced CO adsorption occurs at highly undercoordinated Au atoms on the perimeters of the nanoparticles. As the Au coverage is increased, the CO adsorption energy and C–O stretching frequency converge toward values associated with bulk Au. Annealing to 600 K results in bulk-like CO adsorption characteristics at any Au coverage. These results suggest that the $h$-BN/Rh(111) surface represents a potential platform for evaluating the role of Au vs support in low-temperature CO oxidation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Molecular Dynamics Simulations of the Adsorption of Phthalate Esters on Smectite Clay Surfaces

The partitioning of organic contaminants between water and solid surfaces is a key process controlling their fate and transport in natural environments. A novel methodology was developed to predict the adsorption of organic contaminants by smectite clay minerals (high specific surface area adsorbents abundant in natural soils) using molecular dynamics (MD) simulations. The methodology models a stack of flexible Ca- montmorillonite lamellae in direct contact with a bulk aqueous reservoir and uses the metadynamics technique to facilitate the exploration of the free energy landscape. The methodology was tested and validated in the case of six phthalate esters, widely used chemical plasticizers with endocrine disrupting properties. Simulation predictions reveal strong phthalate adsorption, especially for the larger and more hydrophobic phthalates. Predicted partition coefficients (K d values) are consistent with collected batch experimental data. Adsorption was observed on both the exterior basal surfaces and within the interlayer nanopore, with phthalate molecules predominately adopting a flat orientation on the clay surface. Intercalation was also detected in complementary X-ray diffraction (XRD) experiments. A strong inverse relationship between extent of adsorption and clay surface charge density was observed, as phthalate molecules preferentially occupied the more hydrophobic uncharged patches on each surface. Detailed analysis of the free energy of adsorption revealed that phthalate affinity for the clay surface results from a small favorable van der Waals contribution and a large favorable entropic contribution. Overall, this research demonstrates the substantial affinity of smectite clays for phthalate esters and establishes a computational methodology capable of predicting the water-clay partition coefficients of organic contaminants, a key parameter in environmental fate and transport models.

36 MATERIALS SCIENCE↗

Adsorption and Reaction of Methanol on Anatase TiO2(101) Single Crystals and Faceted Nanoparticles

Anatase TiO2 is used extensively in a wide range of heterogeneous and photocatalysis processes. As such, understanding its interactions with prototypical organics such as methanol is of high importance. In this study, we employ a cross-disciplinary approach and study adsorption and dissociation of methanol on the (101) surfaces of anatase TiO2 single crystals (SCs) and faceted nanoparticles (F-NPs). While scanning tunneling microscopy was used to follow the spatial distribution of adsorbed methanol molecules and methoxy and hydroxy species on SC TiO2(101), comparative temperature programmed desorption and infrared reflection absorption spectroscopy measurements were performed on both SC and F-NP TiO2(101). We find that adsorption of molecular methanol at 80 K on SC TiO2(101) leads to the formation of chains along the titania rows. These chains are metastable and fall apart upon annealing due to the repulsion of neighboring molecules. Further, we find that on SC TiO2(101) methanol deprotonates to produce neighboring methoxy and hydroxyl groups following the annealing of high coverages to room temperature (RT). The coverage of methoxy and hydroxyl groups can be increased with repeated adsorption and annealing cycles, and the annealing above room temperature leads to the recombinative desorption of methanol. On F-NP TiO2(101) surfaces, we find that methanol adsorbs both molecularly and dissociatively at RT. With increasing temperature, molecularly adsorbed methanol gradually converts to methoxy. Therefore, parallel behavior in adsorption and surface reaction is found on both SC and F-NP TiO2(101). An added layer of complexity for the latter is that Ti-OH groups on the nanoparticle surfaces, likely associated with defects, also play an important role in methanol adsorption and surface reaction.

oxides, alcohols, adsorption, scanning, tunneling,↗

Enhanced Ion Adsorption on Mineral Nanoparticles

Classical molecular dynamics simulation was used to study the adsorption of Na + , Ca 2+ , Ba 2+ and Cl-ions on gibbsite edge (1 0 0), basal (0 0 1), and nanoparticle surfaces. The gibbsite nanoparticle consists of both basal and edge surfaces. Simulation results indicate that Na + and Cl - ions adsorb on both (1 0 0) and (0 0 1) surfaces as inner-sphere species (i.e., no water molecules between an ion and the surface). Outer-sphere Cl - ions (i.e., one water molecule between an ion and the surface) were also found on these surfaces. On the (1 0 0) edge, Ca 2+ ions adsorb as inner-sphere and outer-sphere complexes, while on the (0 0 1) surface outer-sphere Ca 2+ ions are the dominant species. Ba 2+ ions were found as inner-sphere and outer-sphere complexes on both surfaces. Calculated ion surface coverages indicate that, for all ions, surface coverages are always higher on the basal surface compared to the edge surface. More importantly, surface coverages for cations on the gibbsite nanoparticle are always higher than those calculated for (1 0 0) and (0 0 1) surfaces. This enhanced ion adsorption behavior for the nanoparticle is due to the significant number of inner-sphere cations found at nanoparticle corners. Outer-sphere cations do not contribute to the enhanced surface coverage. In addition, there is no ion adsorption enhancement observed for the Cl - ion. Our work provides a molecular-scale understanding of the relative significance of ion adsorption onto gibbsite basal versus edge surfaces and demonstrates the corner effect on ion adsorption on nanoparticles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Molecular-Weight-Dependent Infiltration and Adsorption of Polymers into Nanochannels

The mesoporous silica shell coating hydrogenolysis nano-catalysts alters the molecular weight distributions of cleaved polymer chains compared to catalysts without a shell. The shell, composed of radially aligned narrow cylindrical nanopores, reduces the formation of low-valued gaseous products and increases the median molecular weight of the product, thus enhancing the value of the products for polymer upcycling. Here, to understand the role of the mesoporous shell, we have studied the spatial distribution of polystyrene chains, used as a model polymer, in the nanochannels in both the melt phase and solution phase. In the melt, we observed from small-angle X-ray scattering experiments that the infiltration rate of the polymer into the nanochannels is inversely proportional to the molecular weight, which is consistent with theory. In theta solution experiments using UV–vis spectroscopy, we found that the shell significantly enhances polymer adsorption compared to nanoparticles without pores. In addition, the degree of polymer adsorption is not a monotonic function of molecular weight but initially increases with the molecular weight before eventually decreasing. The molecular weight for the peak adsorption increases with the pore diameter. This adsorption behavior is rationalized as resulting from a balance between the mixing entropy gain by surface adsorption and the conformational entropy penalty incurred by chains confined in the nanochannels. The spatial distribution of polymer chains in the nanochannels is visualized by energy-dispersive X-ray spectroscopy (EDX), and inverse Abel-transformed data reveals a less uniform polymer distribution along the primary pore axis for longer chains.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

First-Principles Integrated Adsorption Modeling for Selective Capture of Uranium from Seawater by Polyamidoxime Sorbent Materials

Nuclear power is a relatively carbon-free energy source that has the capacity to be utilized today in an effort to stem the tides of global warming. The growing demand for nuclear energy, however, could put significant strain on our uranium ore resources, and the mining activities utilized to extract that ore can leave behind long-term environmental damage. A potential solution to enhance the supply of uranium fuel is to recover uranium from seawater using amidoximated adsorbent fibers. This technology has been studied for decades but is currently plagued by the material’s relatively poor selectivity of uranium over its main competitor vanadium. In this work, we investigate the binding schemes between uranium, vanadium, and the amidoxime functional groups on the adsorbent surface. Using quantum chemical methods, binding strengths are approximated for a set of complexation reactions between uranium and vanadium with amidoxime functionalities. Those approximations are then coupled with a comprehensive aqueous adsorption model developed in this work to simulate the adsorption of uranium and vanadium under laboratory conditions. Experimental adsorption studies with uranium and vanadium over a wide pH range are performed, and the data collected are compared against simulation results to validate the model. It was found that coupling ab initio calculations with process level adsorption modeling provides accurate predictions of the adsorption capacity and selectivity of the sorbent materials. Furthermore, this work demonstrates that this multiscale modeling paradigm could be utilized to aid in the selection of superior ligands or ligand compositions for the selective capture of metal ions. Furthermore, this first-principles integrated modeling approach opens the door to the in silico design of next-generation adsorbents with potentially superior efficiency and selectivity for uranium over vanadium in seawater.

36 MATERIALS SCIENCE↗

MXene Nanosheets Functionalized with Cu Atoms for Urea Adsorption in Aqueous Media

Ti 3 C 2 T x MXene is an emerging family of two-dimensional materials, and because of its large specific surface area, it has potential for many applications. Herein, a new application using Cu-doped MILD (minimally intensive layer delamination) synthesized Ti 3 C 2 T x MXene for urea removal is demonstrated. The doping of Cu on MXene results in an increase in its affinity for urea adsorption as compared to the pristine MILD synthesized MXene due to the formation of the Cu–urea complex. Previous computational studies have shown that the adsorption energies of urea on the MXene surface can be improved in the presence of Cu. The valence state of Cu in the doped MILD synthesized MXene, which binds on to the surface via Ti–O–Cu linkage, is between 0 and +1 as verified by XAS and XPS. As the optimal urea adsorption occurs on Cu as a single atom site, an increase in Cu doping on MXene does not increase urea removal due to Cu agglomeration. Furthermore, looking at the adsorption behaviour, it seems that Cu-doped MXene follows the monolayer adsorption on homogenous surface model.

36 MATERIALS SCIENCE↗

Size-Dependent Adsorption and Adhesion Energetics of Ag Nanoparticles on Graphene Films on Ni(111) by Calorimetry

Interest in the use of carbon supports for late transition metal nanoparticle catalysts has expanded rapidly due to the increasing importance of electrocatalysts for clean energy and environmental technologies and the use and storage of renewable electricity. Compared to oxide supports, almost nothing is known about the effect of metal nanoparticle size on the energies of the metal atoms within carbon-supported nanoparticles, yet these energies are crucial for understanding their surface reactivity and sintering kinetics. Here, the growth morphology and adsorption energetics of vapor-deposited Ag onto clean graphene/Ni(111) surfaces have been studied using a combination of single-crystal adsorption calorimetry (SCAC) and He + low-energy ion scattering (LEIS). The differential heat of Ag adsorption is 207 kJ/mol for making ~30 atom Ag particles on graphene terraces at 100 K and 16 kJ/mol higher for making ~9 atom Ag clusters at defect sites at the same temperature. The heat of adsorption increases rapidly with Ag coverage as 3D Ag nanoparticles nucleate and grow in size, asymptotically reaching within 5 kJ/mol of the bulk Ag sublimation enthalpy (285 kJ/mol) by 2 ML. The heats of adsorption and Ag nanoparticle densities from LEIS (~10 16 /m 2 ) were combined to provide the Ag/graphene adhesion energy (E adh = 1.8 J/m 2 in the large-particle limit) and the Ag chemical potential (μ) versus effective particle diameter (D). The Ag chemical potential was well-fitted by μ(D) = (3γ v /M – E adh )(1 + (1.5 nm)/D)(2V m /D), where γ v /M is the surface energy of bulk Ag and V m is its molar volume. The same equation is known to fit similar data for late transition metals on clean surfaces of metal oxide single crystals. The adhesion energy of Ag measured here on graphene falls within the wide range measured for Ag on those oxide surfaces and is almost as large as on the oxide that binds Ag particles most strongly, namely CeO 2 (111), which is well-known to be very effective at resisting catalyst deactivation by metal sintering. Furthermore, these results imply that carbon supports will be effective at resisting sintering and that Ag particles smaller than 6 nm on graphene will bind small adsorbed reaction intermediates more weakly than supports with weaker adhesion to Ag, like MgO(100).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Adhesion Energies of Solvent Films to Pt(111) and Ni(111) Surfaces by Adsorption Calorimetry

Solvent/metal adhesion energies are vital to understanding solvent effects on adsorption energies, which are, in turn, central to understanding liquid-phase catalysis, electrocatalysis, and many other technologies such as adsorption-based separations and chemical sensors. Differences in reactant adsorption energies in different solvents are dominated by differences in their solvent/metal adhesion energies. Here, the adhesion energies of five liquid solvents to clean Pt(111) and Ni(111) surfaces have been estimated using ultrahigh vacuum calorimetric measurements of heats of adsorption versus coverage integrated from zero coverage up to thick (bulk-like) multilayer solid films. The adhesion energies are found to vary from 0.15 to 0.60 J/m 2 , increasing in the trend CH 3 OH < HCOOH < H 2 O < benzene ≈ phenol. This trend suggests that solvents with higher heats of adsorption per unit area in the first adsorbed layer have higher adhesion energies to a given metal surface. The adhesion energies to Ni(111) are generally larger than to Pt(111) (on average by 0.09 J/m 2 ). This is due to the 24% higher number of metal atoms per unit area on Ni(111) than on Pt(111) and, with oxygen-containing solvents, the greater oxophilicity of Ni compared to that of Pt.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Asphaltene Adsorption onto Self-Assembled Monolayers of Alkyltrichlorosilanes of Varying Chain Length

The adsorption of asphaltenes onto flat silica surfaces modified with self-assembled monolayers (SAMs) of alkyltrichlorosilanes of varying thickness due to a variable number of carbon atoms (N{sub C}) has been studied by means of contact angle measurements, spectroscopic ellipsometry, and near-edge X-ray absorption fine structure spectroscopy. The extent of asphaltene adsorption was found to depend primarily on the ability of the SAM layer to shield the underlying silicon substrate from interacting with the asphaltenes present in solution. Specifically, asphaltene adsorption decreased with an increase in NC and/or an increase in SAM grafting density, {sigma}{sub SAM}, (i.e., number of SAM molecules per unit area). The effect of the solvent quality on the extent of asphaltene adsorption was gauged by adsorbing asphaltenes from toluene, 1-methylnaphthalene, tetralin, decalin, and toluene-heptanes mixtures. The extent of asphaltene adsorption was found to increase proportionally with a decrease in the Hildebrand solubility parameter of the solvent.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Novel fluidized bed reactor for integrated NOx adsorption-reduction with hydrocarbons

In order to avoid the negative impact of excessive oxygen in the combustion flue gases on the selectivity of most hydrocarbon selective catalytic reduction (HC-SCR) catalysts, an integrated NOx adsorption-reduction process has been proposed in this study for the treatment of flue gases under lean burn conditions by decoupling the adsorption and reduction into two different zones. The hypothesis has been validated in a novel internal circulating fluidized bed (ICFB) reactor using Fe/ZSM-5 as the catalyst and propylene as the reducing agent. Effects of propylene to the NOx molar ratio, flue gas oxygen concentration, and gas velocity on NOx conversion were studied using simulated flue gases. The results showed that increasing the ratio of HC:NO improved the reduction performance of Fe/ZSM-5 in the ICFB reactor. NOx conversion decreased with an increasing flue gas flow velocity in the annulus U{sub A} but increased with an increasing reductant gas flow velocity in the draft tube U{sub D}. The NOx adsorption ratio decreased with increasing U{sub A}. In most cases, NOx conversion was higher than the adsorption ratio due to the relatively poor adsorption performance of the catalyst. Fe/ZSM-5 showed a promising reduction performance and a strong inhibiting ability on the negative impact of excessive O{sub 2} in the ICFB reactor, proving that such an ICFB reactor possessed the ability to overcome the negative impact of excessive O{sub 2} in the flue gas using Fe/ZSM-5 as the deNOx catalyst. 22 refs., 10 figs.

01 COAL, LIGNITE, AND PEAT↗

Surface complexation modeling of U(VI) adsorption by aquifer sediments from a former mill tailings site at Rifle, Colorado

U(VI) adsorption by two aquifer sediment samples was studied under oxic conditions as a function of pH, U(VI), Ca, and dissolved carbonate concentration. Background-A (BKG-A) sediment was collected upstream of a former uranium mill-tailings site at Rifle, Colorado, and Little Rusty Composite (LRC) was collected on site but with low U contamination. Batch adsorption experiments were performed using artificial groundwater solutions prepared to simulate the field groundwater composition in equilibrium with specific partial pressures of carbon dioxide. To encompass the geochemical conditions of the alluvial aquifer at the site, the experimental conditions ranged from 6.8×10-8 to 10-5 M in [U(VI)]tot, 7.2 to 8.0 in pH, 3.0×10-3 to 6.0×10-3 M in [Ca2+], and 0.05 to 2.6% in partial pressure of carbon dioxide. The sediment was extracted with a dilute bicarbonate/carbonate solution to determine the background labile U(VI) already present in the sediment. A semi-empirical surface complexation model was developed to describe U(VI) adsorption using FITEQL4. The non-electrostatic, generalized composite surface complexation model successfully simulated U(VI) adsorption over the range of groundwater conditions at the Old Rifle site, using a two-site, two-reaction fitting scheme. The sensitivity of model parameters to background U(VI) concentration on the two samples was evaluated. U(VI) adsorption experiments were also performed using a sand fraction of BKG-A separated through repeated sonication and wet-sieving. Surface area normalized Kd for the bulk and sand fraction indicated similar reactivity for both. The surface complexation model developed in this work is expected to contribute to the prediction of fate and transport of U(VI) in the alluvial aquifer at the Old Rifle site, and to assist in the simulation of biostimulation field experiments performed at the site.

54 ENVIRONMENTAL SCIENCES↗

pH-Driven Restructuring of Hydration Layers and Cation Adsorption at the Alumina–Water Interface

Oxide−water interfaces underpin ion separations, catalysis, and electrochemical energy technologies, where the electrical double layer (EDL) controls adsorption, transport, and reactivity. However, the molecular-scale links between pHdependent surface protonation, hydration-layer structure, and counterion adsorption remain poorly defined. Here, we combine in situ crystal truncation rod (CTR) and resonant anomalous X-ray reflectivity (RAXR) with streaming potential measurements and ab initio molecular dynamics (AIMD) simulations to resolve the chemical and structural evolution of the EDL at the single-crystal alumina (012)−water interface in 10 mM Rb + over pH 3−12. CTR measurements reveal two distinct adsorbed water layers at ∼2.2 and ∼3.5 Å above the surface. Each water layer shifts toward the substrate at transition pHs near 6.5 and 10.6, respectively, reflecting changes in primary hydration layer structure in response to the deprotonation of bridging and terminal aluminol groups. RAXR shows a 10-fold increase in Rb + coverage and a decrease in mean adsorption height from ∼3.5 to ∼2.7 Å with increasing pH, indicating enhanced counterion binding accompanied by Stern layer contraction. Streaming potential measurements demonstrate that the zeta potential, i.e., the potential at the hydrodynamic shear plane, is positive at pH 3 and becomes negative at pH ≥ 3.5. The negative charge magnitude increases with increasing pH, consistent with progressive surface deprotonation at higher pH. AIMD identifies inner- and outer-sphere Rb+ complexes whose adsorption heights and coordination geometries depend sensitively on the protonation state of surface oxygens, providing atomistic support for the experimentally inferred trends. These measurements establish two discrete, site-specific pH transitions in hydration-layer structure that track aluminol (de)protonation and quantitatively link them to a pH-driven contraction of the Stern layer (increasing Rb + coverage and decreasing adsorption height). This provides a direct structural basis for connecting surface acid−base chemistry to ion binding distances at an oxide−water interface.

Adsorption↗

Asphaltene Adsorption onto Self-Assembled Monolayers of Mixed Aromatic

The adsorption of asphaltenes onto flat solid surfaces modified with mixed self-assembled monolayers (SAMs) of aliphatic and aromatic trichlorosilanes with varying wettabilities, aromaticities, and thicknesses is tested. The mixed SAMs are characterized by means of contact angle to assess hydrophobicity and molecular and chemical uniformity, spectroscopic ellipsometry to measure the thickness of the films, and near edge X-ray absorption fine structure (NEXAFS) spectroscopy to assess chemical and molecular composition. The molecular characteristics of the adsorbed asphaltene layer and the extent of asphaltene adsorption are determined using NEXAFS and spectroscopic ellipsometry, respectively. The SAMs are formed by depositing phenyl-, phenethyl-, butyl-, and octadecyl- trichlorosilanes from toluene solutions onto silica-coated substrates; the chemical composition and the wettability of the SAM surface is tuned systematically by varying the trichlorosilane composition in the deposition solutions. The adsorption of asphaltenes on the substrates does not correlate strongly with the SAM chemical composition. Instead, the extent of asphaltene adsorption decreases with increasing SAM thickness. This observation suggests that the leading interaction governing the adsorption of asphaltenes is their interaction with the polar silica substrate and that the chemical composition of the SAM is of secondary importance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Model for Adsorption of Ligands to Colloidal Quantum Dots with Concentration-Dependent Surface Structure

A study of the adsorption equilibrium of solution-phase CdS quantum dots (QDs) and acid-derivatized viologen ligands (N-[1-heptyl],N'-[3-carboxypropyl]-4,4'-bipyridinium dihexafluorophosphate, V{sup 2+}) reveals that the structure of the surfaces of the QDs depends on their concentration. This adsorption equilibrium is monitored through quenching of the photoluminescence of the QDs by V{sup 2+} upon photoinduced electron transfer. When modeled with a simple Langmuir isotherm, the equilibrium constant for QD-V{sup 2+} adsorption, K{sub a}, increases from 6.7 x 10{sup 5} to 8.6 x 10{sup 6} M{sup -1} upon decreasing the absolute concentration of the QDs from 1.4 x 10{sup 6} to 5.1 x 10{sup 8} M. The apparent increase in K{sub a} upon dilution results from an increase in the mean number of available adsorption sites per QD from 1.1 (for [QD] = 1.4 x 10{sup 6} M) to 37 (for [QD] = 5.1 x 10{sup 8} M) through desorption of native ligands from the surfaces of the QDs and through disaggregation of soluble QD clusters. A new model based on the Langmuir isotherm that treats both the number of adsorbed ligands per QD and the number of available binding sites per QD as binomially distributed quantities is described. This model yields a concentration-independent value for K{sub a} of 8.7 x 10{sup 5} M{sup -1} for the QD-V{sup 2+} system and provides a convenient means for quantitative analysis of QD-ligand adsorption in the presence of competing surface processes.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Correlation between oxygen adsorption energy and electronic structure of transition metal macrocyclic complexes

Oxygen adsorption energy is directly relevant to the catalytic activity of electrocatalysts for oxygen reduction reaction (ORR). In this study, we established the correlation between the O{sub 2} adsorption energy and the electronic structure of transition metal macrocyclic complexes which exhibit activity for ORR. To this end, we have predicted the molecular and electronic structures of a series of transition metal macrocyclic complexes with planar N{sub 4} chelation, as well as the molecular and electronic structures for the O{sub 2} adsorption on these macrocyclic molecules, using the density functional theory calculation method. We found that the calculated adsorption energy of O{sub 2} on the transition metal macrocyclic complexes was linearly related to the average position (relative to the lowest unoccupied molecular orbital of the macrocyclic complexes) of the non-bonding d orbitals (d{sub z{sup 2}}, d{sub xy}, d{sub xz}, and d{sub yz}) which belong to the central transition metal atom. Importantly, our results suggest that varying the energy level of the non-bonding d orbitals through changing the central transition metal atom and/or peripheral ligand groups could be an effective way to tuning their O{sub 2} adsorption energy for enhancing the ORR activity of transition metal macrocyclic complex catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗