Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “zero carbon”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Carbon‐Neutral Pathways for the United States

Abstract The Intergovernmental Panel on Climate Change (IPCC) Special Report on Global Warming of 1.5°C points to the need for carbon neutrality by mid‐century. Achieving this in the United States in only 30 years will be challenging, and practical pathways detailing the technologies, infrastructure, costs, and tradeoffs involved are needed. Modeling the entire U.S. energy and industrial system with new analysis tools that capture synergies not represented in sector‐specific or integrated assessment models, we created multiple pathways to net zero and net negative CO 2 emissions by 2050. They met all forecast U.S. energy needs at a net cost of 0.2–1.2% of GDP in 2050, using only commercial or near‐commercial technologies, and requiring no early retirement of existing infrastructure. Pathways with constraints on consumer behavior, land use, biomass use, and technology choices (e.g., no nuclear) met the target but at higher cost. All pathways employed four basic strategies: energy efficiency, decarbonized electricity, electrification, and carbon capture. Least‐cost pathways were based on >80% wind and solar electricity plus thermal generation for reliability. A 100% renewable primary energy system was feasible but had higher cost and land use. We found multiple feasible options for supplying low‐carbon fuels for non‐electrifiable end uses in industry, freight, and aviation, which were not required in bulk until after 2035. In the next decade, the actions required in all pathways were similar: expand renewable capacity 3.5 fold, retire coal, maintain existing gas generating capacity, and increase electric vehicle and heat pump sales to >50% of market share. This study provides a playbook for carbon neutrality policy with concrete near‐term priorities.

Williams, James H.↗
DOE OSTI2023

Assessing the Impact of Renewable Energy Sources to Achieve Net Zero Emissions

The mass generation of green energy through the pathway of Renewable Energy Sources (RES), is one of the major decisive components contributing to the concept of decarbonization. The energy sector assessment reveals that out of per kWh energy produced, renewable energy emits between 9 and 1000 gCO2 equivalent on a life-cycle basis. Contemplating the literature and the latest reports released by world-wide energy department(s), this study presents a comprehensive concept of carbon footprint, its causes and effects including major impact on biodiversity and human life. The study discusses the substantial steps taken by developing countries like India in leveraging RES for the production of energy and its progressive impact on ecology. The discussion would be inclusive of major change and transformation which has brought significant drop of 16% in the greenhouse gas (GHG) emissions by installation of 104.9 GW of RES excluding Hydro. The appropriate steps taken forward therefore align with the Sustainable Development Goals (SDGs) of the United Nation (UN) in achieving net zero emission (NZE).

decarbonization↗
DOE OSTI2022

Biochar Nanocomposite as an Inexpensive and Highly Efficient Carbonaceous Adsorbent for Hexavalent Chromium Removal

Biochar is commonly used for soil amendment, due to its excellent water-holding capacity. The Cr(VI) contamination of water is a current environmental issue in industrial regions. Here, we evaluated the effects of two-step modifications on boosting biochar’s performance in terms of the removal of aqueous hexavalent chromium (Cr(VI)), along with investigating the alterations to its surface properties. The first modification step was heat treatment under air at 300 °C, producing hydrophilic biochar (HBC). The resulting HBC was then impregnated with zero-valent iron nanoparticles (nZVI), creating an HBC/nZVI composite, adding a chemical reduction capability to the physical sorption mechanism. Unmodified biochar (BC), HBC, and HBC/nZVI were characterized for their physicochemical properties, including surface morphology and elemental composition, by SEM/EDS, while functional groups were ascertained by FTIR and surface charge by zeta potential. Cr(VI) removal kinetic studies revealed the four-time greater sorption capacity of HBC than BC. Although unmodified BC showed faster initial Cr(VI) uptake, it rapidly worsened and started desorption. After nZVI impregnation, the Cr(VI) removal rate of HBC increased by a factor of 10. FTIR analysis of biochars after Cr(VI) adsorption showed the presence of Cr(III) oxide only on the used HBC/nZVI and demonstrated that the carbonyl and carboxyl groups were the main groups involved in Cr(VI) sorption. Modified biochars could be considered an economical substitute for conventional methods.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Engineering Small HOMO–LUMO Gaps in Polycyclic Aromatic Hydrocarbons with Topologically Protected States

Topological phases in laterally confined low-dimensional nanographenes have emerged as versatile design tools that can imbue otherwise unremarkable materials with exotic band structures ranging from topological semiconductors and quantum dots to intrinsically metallic bands. The periodic boundary conditions that define the topology of a given lattice have thus far prevented the translation of this technology to the quasi-zero-dimensional (0D) domain of small molecular structures. Here, we describe the synthesis of a polycyclic aromatic hydrocarbon (PAH) featuring two localized zero modes (ZMs) formed by the topological junction interface between a trivial and nontrivial phase within a single molecule. First-principles density functional theory calculations predict a strong hybridization between adjacent ZMs that gives rise to an exceptionally small HOMO–LUMO gap. Scanning tunneling microscopy and spectroscopy corroborate the molecular structure of 9/7/9-double quantum dots and reveal an experimental quasiparticle gap of 0.16 eV, corresponding to a carbon-based small molecule long-wavelength infrared (LWIR) absorber.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2022

The radial phase variation of reversed-shear and toroidicity-induced Alfvén eigenmodes in DIII-D

The eigenfunction of an instability contains information about energy flow in the wave. Here, the amplitude and phase of electron cyclotron emission radiometer data from hundreds of DIII-D reversed shear Alfvén eigenmodes (RSAE) and toroidicity-induced Alfvén eigenmodes (TAE) are analyzed along the outboard horizontal midplane. The radial phase profile can be flat, linearly rising or falling, convex or concave; in other words, a wide variety of shapes is observed. For a particular mode, often the radial phase profile remains approximately constant as the mode evolves in time but sometimes it changes rapidly. Many TAEs and some RSAEs have phase profiles that are rather flat where the mode amplitude is largest but rise steadily by ~2π at large major radius. Rapid phase changes are observed when the frequencies of an RSAE and TAE overlap and the modes couple. The phase profile depends weakly on the fast-ion gradient that would appear in the absence of wave-induced transport. Linear and quadratic fits to the phase profiles, together with many plasma parameters, are assembled into RSAE and TAE databases. In both cases, large variability is observed. For RSAEs, the strongest phase dependencies are on electron temperature T e , RSAE mode frequency, and the density of carbon impurities. For TAEs, the strongest dependencies are on beam power and major radius of the mode. In general, the average RSAE radial phase profile is essentially flat but the TAE profile has non-zero slope and curvature.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

In situ preparation of visible-light-driven carbon quantum dots/NaBiO 3 hybrid materials for the photoreduction of Cr(VI)

Here, different carbon quantum dots (CQDs)/NaBiO 3 hybrid materials were synthesized as photocatalysts to effectively utilize visible light for the photocatalytic degradation of contaminants effectively. These hybrid materials exhibit an enhanced photocatalytic reduction of hexavalent chromium (Cr(VI)) in the aqueous medium. Zero-dimensional nanoparticles of CQDs were embedded within the two-dimensional NaBiO 3 nanosheets by the hydrothermal process. Compared with that of the pure NaBiO 3 nanosheets, the photocatalytic performance of the hybrid catalysts was significantly high and 6 wt.% CQDs/NaBiO 3 catalyst exhibited better photocatalytic performance. We performed the first-principles density functional theory calculations to study the interfacial properties of pure NaBiO 3 nanosheets and hybrid photocatalysts, and confirmed the CQDs played an important role in the CQDs/NaBiO 3 composites. The experimental results indicated that the enhanced reduction of Cr(VI) was probably due to the high loading of CQDs (electron acceptor) on NaBiO 3 , which made NaBiO 3 nanomaterials to respond in visible light and significantly improved their electron-hole separation efficiency.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Coupling flux balance analysis with reactive transport modeling through machine learning for rapid and stable simulation of microbial metabolic switching

Integrating genome-scale metabolic networks with reactive transport models (RTMs) provides a detailed description of the dynamic changes in microbial growth and metabolism. Despite promising demonstrations in the past, computational inefficiency has been pointed out as a critical issue to overcome because it requires repeated application of linear programming (LP) to obtain flux balance analysis (FBA) solutions in every time step and spatial grid. To address this challenge, we propose a new simulation method where we train and validate artificial neural networks (ANNs) using randomly sampled FBA solutions and incorporate the resulting surrogate FBA model (represented as algebraic equations) into RTMs as source/sink terms. We demonstrate the efficiency of our method via a case study of Shewanella oneidensis MR-1. During aerobic growth on lactate, S. oneidensis produces metabolic byproducts (such as pyruvate and acetate), which are subsequently consumed as alternative carbon sources when the preferred nutrients are depleted. To effectively simulate these complex dynamics, we used a cybernetic approach that models metabolic switches as the outcome of dynamic competition among multiple growth options. In both zero-dimensional batch and one-dimensional column configurations, the ANN-based surrogate models achieved substantial reduction of computational time by several orders of magnitude compared to the original LP-based FBA models. Moreover, the ANN models produced robust solutions without any special measures to prevent numerical instability. These developments significantly promote our ability to utilize genome-scale networks in complex, multi-physics, and multi-dimensional ecosystem modeling.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Vegetation Warming Experiment: Thaw Depth and dGPS locations, Barrow, Alaska, 2017

Thaw depth measurements within and around warming chambers, and at paired ambient plots lmeasured in 2017 on the Barrow Environmental Observatory (BEO), Utqiagvik, Alaska. Measurements were taken at the start and end of chamber deployment, and two intermediate times during the 2017 growing season. dGPS measurements of chamber and ambient plot locations are included. The data package includes thaw depth and gps data in csv and xlsx formats. The xlsx files include additional metadata. The GPS data is also included in kml format. These data were collected as part of a series of single-season warming experiments on tundra vegetation on the Barrow Environmental Observatory (BEO), Utqiagvik, Alaska. A different plant species was targeted each year, over four experimental years from 2017–2021. Each year, five warming chambers and paired ambient control plots were deployed from around the time of snowmelt in mid-June through to mid-September. Average seasonal warming of 3–4°C was achieved using Zero Power Warming (ZPW) chambers (Lewin et al, 2017).The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research. The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska. Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Vegetation Warming Experiment: Thaw Depth and dGPS locations, Barrow, Alaska, 2018

Thaw depth measurements within and around warming chambers, and at ambient plots. Measurements were taken at the start and end of chamber deployment, and two intermediate times during the 2018 growth season. dGPS measurements of chamber and ambient plot locations. This dataset contains one kmz, two xlsx, and three csv files where the xlsx files have been preserved as csvs for preservation. These data were collected as part of a series of single-season warming experiments on tundra vegetation on the Barrow Environmental Observatory (BEO), Utqiagvik, Alaska. A different plant species was targeted each year, over four experimental years from 2017–2021. Each year, five warming chambers and paired ambient control plots were deployed from around the time of snowmelt in mid-June through to mid-September. Average seasonal warming of 3-4°C was achieved using Zero Power Warming (ZPW) chambers (Lewin et al, 2017).The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research. The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska. Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Multi-Scale Modeling for Plasma-Enhanced Ammonia Decomposition over Carbides and Nitrides

Ammonia is a carbon-free hydrogen carrier, but its decomposition typically requires high temperatures over costly Ru-based catalysts due to the large barrier for N≡N bond formation. We develop a multiscale framework combining density functional theory, zero-dimensional plasma kinetics, and microkinetic modeling to elucidate how non-thermal plasma (NTP) enables low-temperature NH 3 decomposition over Co-based carbides and nitrides, benchmarked against Ru and Co. Under thermal conditions, all catalysts are limited by N≡N bond formation, with Co 3 C(001) most active owing to its negatively charged surface, strong N* binding, and low activation barriers of N≡N bond formation. Plasma-induced vibrational excitation of NH 3 and its reactive radicals promotes a radical-driven •NH 2 –N* coupling pathway that dominates on Co 3 C(001) and Co 3 N(001), shifting the rate-limiting step to NH 3 (v1) dissociation, increasing turnover frequencies by up to 6 orders of magnitude, and reducing the temperature needed to reach a turnover frequency of 5 s –1 from >680 °C (Ru and Co under thermal condition) to 267 °C (Co 3 C) and 415 °C (Co 3 N). These results identify Co-based carbides and nitrides as promising plasma-active catalysts for energy-efficient hydrogen production from ammonia.

ammonia decomposition↗
DOE OSTI2021

Searay Autonomous Offshore Power System AOPS: Results of Sea Trials and Payload Support Demonstration

As the offshore energy sector looks to fully implement resident, autonomous, robotic, digital systems offshore, one missing piece of the puzzle is remote power generation. Further complicating these efforts are the owner/operators’ move towards net zero operations. Here, the combination represents a significant dilemma for the offshore energy industry: if gensets and topside vessels are not appropriate or practical power sources for future resident systems, how will these needed cost and carbon-saving innovations come to market and get deployed in the field?

16 TIDAL AND WAVE POWER↗
DOE OSTI2021

Tribocatalytically-activated formation of protective friction and wear reducing carbon coatings from alkane environment

Minimizing the wear of the surfaces exposed to mechanical shear stresses is a critical challenge for maximizing the lifespan of rotary mechanical parts. In this study, we have discovered the anti-wear capability of a series of metal nitride-copper nanocomposite coatings tested in a liquid hydrocarbon environment. The results indicate substantial reduction of the wear in comparison to the uncoated steel substrate. Analysis of the wear tracks indicates the formation of carbon-based protective films directly at the sliding interface during the tribological tests. Raman spectroscopy mapping of the wear track suggests the amorphous carbon (a-C) nature of the formed tribofilm. Further analysis of the tribocatalytic activity of the best coating candidate, MoN-Cu, as a function of load (0.25–1 N) and temperature (25 °C and 50 °C) was performed in three alkane solutions, decane, dodecane, and hexadecane. Results indicated that elevated temperature and high contact pressure lead to different tribological characteristics of the coating tested in different environments. The elemental energy dispersive x-ray spectroscopy analysis and Raman analysis revealed formation of the amorphous carbon film that facilitates easy shearing at the contact interface thus enabling more stable friction behavior and lower wear of the tribocatalytic coating. These findings provide new insights into the tribocatalysis mechanism that enables the formation of zero-wear coatings.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Metamorphic Tunnel Junctions Grown Via MOCVD Designed for GaAs 0.75 P 0.25 /Si Tandem Solar Cells

A high-performance metamorphic Al 0.2 Ga 0.8 As 0.75 P 0.25 /GaAs 0.75 P 0.25 heterojunction tunnel junction structure was developed for application to monolithic epitaxial GaAs 0.75 P 0.25 /Si 1.7 eV/1.1 eV bandgap tandem solar cells produced via metal-organic chemical vapor deposition. Doping optimization focused on both bulk doping concentrations and mitigating the transient incorporation effects that otherwise causes non-abrupt doping profiles in the Te doped layer. Furthermore, these efforts resulted in a fully-relaxed metamorphic tunnel diode at the target lattice constant having a peak tunneling current density (JP) of 279.1 A·cm –2 and a zero-bias resistance area product (RA) of 3.0×10 –4 Ω·cm 2 . After post-growth annealing to emulate the thermal load of the GaAs 0.75 P 0.25 top cell growth and elimination of the performance enhancing carbon activation anneal, the device achieved JP = 13.1 A·cm –2 and RA = 1.5×10 –3 Ω·cm 2 . These worst-case values are very promising as they enable the operation of GaAs 0.75 P 0.25 /Si tandems under one-sun AM1.5G illumination with negligible series resistance and at AM1.5D concentrations up to 240 suns with only 0.1% absolute efficiency loss.

14 SOLAR ENERGY↗
DOE OSTI2022

Impact of Transport Electrification Demand and Charging Schedules on Electricity Markets and Nuclear Generators

As the U.S. pursues deep decarbonization targets, electric vehicles (EVs) are likely to become a major driver of demand growth and a major determinant of daily demand patterns. This study analyzes a possible future ERCOT-like electricity grid, and examines the impact of different types of EV charging schedules on grid and market outcomes. This analysis demonstrates the significant impact of EV charging patterns on capacity expansion simulations. Even without EVs, the overall daily demand profile in a market can have significant impacts on prices and grid stability in that system, especially if non-dispatchable renewable generators (e.g. wind and solar) make up a significant fraction of the generation mix. EV demand will not necessarily follow this preexisting demand profile, so its daily trends may significantly change what generation portfolio would optimally serve the system. Furthermore, the effects of EV demand can alter the profitability of different types of units, by altering the frequency of market events like extreme-demand hours or zero-price hours. These effects are explored in this study. The EV demand levels were derived from MARKAL simulations of the West-South-Central North American Electric Reliability Corporation (NERC) region for the year 2050, using a carbon tax of $100/ton. The baseline MARKAL simulation forecasted that 23% of the region’s annual electricity demand in 2050 would be attributable to EVs, and broke out demand projections for EV and non-EV end-use in that year. To model lower EV penetration into the system, an additional case was explored which assumed that EVs only achieved 75% of the demand level projected by MARKAL.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2022

Ultrafast infrared plasmon switching in aligned carbon-nanotube optical resonators

Reconfigurable plasmonic materials are crucial components in active photonic devices for optical communication, signal processing, and sensing applications. Certain candidates including transparent conducting oxides, small-bandgap semiconductors (i.e. Ge, InSb), and conducting polymers can exhibit switchable free carrier concentrations triggered by optical, electrical or thermal excitations. Here, we show that aligned films of single-walled carbon nanotubes (SWCNTs) can serve as all-optically tunable plasmonic material in the mid-infrared range, thereby adding them to the library of switchable plasmonic materials. Interband optical pumping with femtosecond laser pulses results in the photoexcitation of free charge carriers, which transiently blueshifts the plasmon resonances of patterned, periodic SWCNT nano-resonators spanning the mid-infrared spectral range from 1700 to 2700 cm -1 . Furthermore. the ultrafast plasmon modulation exhibits a nearly single-picosecond decay time, attributed to interband carrier relaxation and inter-tube charge transfer. Given that aligned films of SWCNTs have high thermal stability, excellent photostability, epsilon-near-zero property, and extremely large optical anisotropy, their dynamic tunability represents a promising pathway towards active optical devices in the technologically important mid-infrared range.

single-walled carbon nanotubes↗
DOE OSTI2020

Data from: No‐till establishment improves the climate benefit of bioenergy crops on marginal grasslands

Expanding biofuel production is expected to accelerate the conversion of unmanaged marginal lands to meet biomass feedstock needs. Greenhouse gas production during conversion jeopardizes ensuing climate benefits, but most research to date has focused only on conversion to annual crops and only following tillage. Here we report the global warming impact of converting USDA Conservation Reserve Program (CRP) grasslands to three types of bioenergy crops using no-till (NT) versus conventional tillage (CT). In three CRP fields planted to continuous corn, switchgrass, or restored prairie we established replicated NT and CT plots. For the two years following an initial soybean year in all fields, we found that, on average, NT conversion reduced nitrous oxide (N2O) emissions by 50% and carbon dioxide (CO2) emissions by 20% compared to CT conversion. Differences were higher in year 1 than in year 2 in the continuous corn field, and in the two perennial systems the differences disappeared after year 1. In all fields net CO2 emissions (as measured by eddy covariance) were positive for the first two years following CT establishment, but following NT establishment net CO2 emissions were close to zero or negative, indicating net C sequestration. Overall, NT improved the global warming impact of biofuel crop establishment following CRP conversion by over 20-fold compared to CT (-6.01 Mg CO2e ha-1 yr-1 for NT vs. -0.25 Mg CO2e ha-1 yr-1 for CT, on average). We also found that IPCC estimates of N2O emissions (as measured by static chambers) greatly underestimated actual emissions for converted fields regardless of tillage. Policies should encourage adoption of NT for converting marginal grasslands to perennial bioenergy crops in order to reduce carbon debt and maximize climate benefits.

09 BIOMASS FUELS↗
DOE OSTI2022

U.S. Federal Policy Considerations for the Management of Retired Large-Format Batteries

The global demand for large-format batteries used in electric vehicles (EV) and battery energy storage is expected to continue as governments call for zero emission policies. Total installed large-scale stationary battery energy storage is expected to increase almost 20-fold in the coming years - from 17 GW installed globally in 2020 to 358 GW projected in 2030. Similarly, light duty EVs sales globally are expected to increase more than 8-fold from 2020 to 2030 - from 3 million units to 25 million units. The expected demand for large-format batteries brings supply chain concerns, and economic opportunities. Domestic reuse and recycling is one potential circular economy solution for large-format batteries. This presentation discusses current U.S. law and regulatory landscape for the reuse and recycling of large-format batteries, and how certain policy frameworks impact reuse and end-of-life management decisions for large-format battery materials.

battery↗