Results for “virtual laboratories” — Page 34

DOE OSTI2025

The Transient Reactor Test Facility (TREAT)

TREAT operated from 1959-1994, later refurbished & resumed operation in 2017 to support fuel safety testing Zircaloy-clad graphite/fuel blocks comprise core Virtually any power history possible within ~2000 MJ core transient energy capacity From milliseconds to minutes: Pulses, Ramps, LOCA Fuel motion monitoring system “hodoscope” observes fast neutrons emitted from specimens to track fuel relocation in real time Reactor also can be a neutron source to adjacent radiography facility Experiment vehicle does everything else Safety containment, specimen environment, and instrumentation

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

NASA NTRS2005

Predictive Interfaces for Long-Distance Tele-Operations

We address the development of predictive tele-operator interfaces for humanoid robots with respect to two basic challenges. Firstly, we address automating the transition from fully tele-operated systems towards degrees of autonomy. Secondly, we develop compensation for the time-delay that exists when sending telemetry data from a remote operation point to robots located at low earth orbit and beyond. Humanoid robots have a great advantage over other robotic platforms for use in space-based construction and maintenance because they can use the same tools as astronauts do. The major disadvantage is that they are difficult to control due to the large number of degrees of freedom, which makes it difficult to synthesize autonomous behaviors using conventional means. We are working with the NASA Johnson Space Center's Robonaut which is an anthropomorphic robot with fully articulated hands, arms, and neck. We have trained hidden Markov models that make use of the command data, sensory streams, and other relevant data sources to predict a tele-operator's intent. This allows us to achieve subgoal level commanding without the use of predefined command dictionaries, and to create sub-goal autonomy via sequence generation from generative models. Our method works as a means to incrementally transition from manual tele-operation to semi-autonomous, supervised operation. The multi-agent laboratory experiments conducted by Ambrose et. al. have shown that it is feasible to directly tele-operate multiple Robonauts with humans to perform complex tasks such as truss assembly. However, once a time-delay is introduced into the system, the rate of tele\ioperation slows down to mimic a bump and wait type of activity. We would like to maintain the same interface to the operator despite time-delays. To this end, we are developing an interface which will allow for us to predict the intentions of the operator while interacting with a 3D virtual representation of the expected state of the robot. The predictive interface anticipates the intention of the operator, and then uses this prediction to initiate appropriate sub-goal autonomy tasks.

Wheeler, Kevin R.↗

NASA NTRS2006

XBoard: A Framework for Integrating and Enhancing Collaborative Work Practices

Teams typically collaborate in different modes including face-to-face meetings, meetings that are synchronous (i. e. require parties to participate at the same time) but distributed geographically, and meetings involving asynchronously working on common tasks at different times. The XBoard platform was designed to create an integrated environment for creating applications that enhance collaborative work practices. Specifically, it takes large, touch-screen enabled displays as the starting point for enhancing face-to-face meetings by providing common facilities such as whiteboarding/electronic flipcharts, laptop projection, web access, screen capture and content distribution. These capabilities are built upon by making these functions inherently distributed by allowing these sessions to be easily connected between two or more systems at different locations. Finally, an information repository is integrated into the functionality to provide facilities for work practices that involve work being done at different times, such as reports that span different shifts. The Board is designed to be extendible allowing customization of both the general functionality and by adding new functionality to the core facilities by means of a plugin architecture. This, in essence, makes it a collaborative framework for extending or integrating work practices for different mission scenarios. XBoard relies heavily on standards such as Web Services and SVG, and is built using predominately Java and well-known open-source products such as Apache and Postgres. Increasingly, organizations are geographically dispersed, and rely on "virtual teams" that are assembled from a pool of various partner organizations. These organizations often have different infrastructures of applications and workflows. The XBoard has been designed to be a good partner in these situations, providing the flexibility to integrate with typical legacy applications while providing a standards-based infrastructure that is readily accepted by most organizations. The XBoard has been used on the Mars Exploration Rovers mission at JPL, and is currently being used or considered for use in pilot projects at Johnson Space Center (JSC) Mission Control, the University of Arizona Lunar and Planetav Laboratory (Phoenix Mars Lander), and MBART (Monterey Bay Aquarium Research Institute).

Shab, Ted↗

DOE OSTI2023

Virtual Flow Solver - Geophysics: A 3D Incompressible Navier-Stokes Solver

Virtual Flow Solver - Geophysics (VFS-Geophysics) is a three-dimensional (3D) incompressible Navier-Stokes solver based on the Curvilinear Immersed Boundary (CURVIB) method. The CURVIB is a sharp interface type of immersed boundary (IB) method that enables the simulation of fluid flows in the presence of geometrically complex moving bodies. The CURVIB method can be applied to wind/MHK turbine simulations and energy applications. VFS-Geophysics is the result of many years of research work by several graduate students, post-docs, and research associates that have been involved in the Computational Hydrodynamics and Biofluids Laboratory directed by Professor Fotis Sotiropoulos. The preparation of the present manual has been supported by the U.S. Department of Energy (DE-EE 0005482).

16 TIDAL AND WAVE POWER↗

DOE OSTI2025

Microgrids 2025 editorial

We, the guest editors, thank everyone who has contributed to this virtual special issue (VSI), Microgrids 2025. This editorial includes a brief blurb for each accepted paper, collected in five loose areas. The topics represented do not settle neatly into categories, so we apologize in advance to any authors who find their work is not correctly represented. Within each section, the paper order reflects the sequence in which the manuscripts were submitted.

24 POWER TRANSMISSION AND DISTRIBUTION↗

DOE OSTI2025

Updating the MCNP neutron guide extension for supermirror absorption, gamma production, and neutron polarization

As supermirror technology has developed, there is a trend towards higher m-values for supermirrors which propagate more neutrons with higher divergence to experimental areas. These supermirrors have thousands of alternating layers of typically nickel and titanium with varying thicknesses deposited on the surface. Neutrons of grazing incidence are reflected from these layers with a probability dependent on the angle of incidence and the wavelength of the neutron. Those neutrons that are not reflected may be captured in the supermirror layers and produce high energy gamma rays that require shielding. The supermirror extension for MCNP has been updated to estimate the capture of neutrons in the supermirror layers of a neutron guide through the banking of photons in a virtual supermirror layer and the reduction of the weight of the neutrons transmitted into the substrate. A new functionality has been added to simulate neutron polarization specifically in the context of a supermirror polarizer for neutron beamlines. In conclusion, the underlying theory, code implementation in MCNP, and examples of gamma production and a V-cavity polarizer will be discussed.

Gamma production↗

DOE OSTI2026

Lithography-Free Mesa Isolation by Laser Ablation for Multijunction III-V Photovoltaic Space Power Generation

Eliminating photolithography from photovoltaic device processing is a significant opportunity for cost reduction and increased manufacturing throughput. In this work, we test femtosecond laser ablation and scribing as an alternative to contact photolithography and wet chemical etching for mesa isolation of multijunction devices. We demonstrate that upright multijunction devices isolated by using the laser as a scribe to cleave through the substrate had virtually no performance loss when compared to a baseline device processed with photolithography. By contrast, devices isolated by laser ablating through the active layers have performance losses that cannot be fully eliminated with postprocess etching. This demonstration of photolithography-free mesa isolation with no performance losses is promising as a pathway to less expensive and higher throughput III-V device manufacturing.

14 SOLAR ENERGY↗

DOE OSTI2023

Toward a Smart Metaverse City: Immersive Realism and 3D Visualization of Digital Twin Cities

Metaverse and its related extended reality technologies can enable immersive, realistic, and participatory visualization of 3D data, and their use and the potential within a smart city can be effective for supporting urban research and urban operations management. This book chapter describes a vision for prototyping a “Smart Metaverse City” to combine the unique advantage of the Metaverse technology with the two-way connectivity of a digital twin city application. This synergy aims to create a virtual environment for immersive geovisualization to help researchers and the public understand the complex urban system through science-based and data-driven approaches. This book chapter selectively reviews past technological and paradigm advancements for collecting, analyzing, and visualizing 3D urban big data. Then we present a prototyping Geographic Information System (GIS) framework, together with some relevant data sources and open-source web technologies, to help researchers create a smart Metaverse city. We demonstrate our vision and discuss its application opportunities through a real-world example, a digital twin city developed at the Oak Ridge National Laboratory, to facilitate participatory, smart, and sustainable campus management.

Xu, Haowen↗

NASA NTRS1994

Performance of BLAS 3, FFTs and NAS Parallel Benchmarks on Cray T3D

Recently, a Cray T3D Emulator has been made available on the Cray Y-MP and C90 computers. The Pittsburgh Supercomputer Center has acquired a CRAY T3D system and many other centers like Jet Propulsion Laboratory (JPL) will have it by the end of 1994. The Cray T3D system is the firstphase system in Cray Research, Inc.'s (CRI) three-phase massively parallel processing (MPP) program. This system features a heterogeneous architecture that closely couples DEC's ALPHA microprocessors and CRI's parallel-vector technology, i.e. the Cray Y-MP and Cray C90. The Cray T3D Emulator will give prospective users a valuable experience in developing high performance applications on the MPP system. This emulator runs programs written in CRI's MPP Fortran programming model (data sharing and work sharing) or Parallel Virtual Machine (PVM) programming model. It will help the users to study data layout, data locality, and data reference patterns thereby providing feedback which will enable one to write more efficient parallel codes. An overview of the Cray T3D hardware, software, and three of its available programming models is presented.The Cray Fortran Programming Model comprising (a) Data Sharing, (b) Worksharing and (c) Message Passing, will be discussed with examples. We have also implemented distributed BLAS 3 (matrix-matrix multiplication) in data parallel model (using only CSHIFT); worksharing model using block distribution and collapsed distribution; and message passing model using PVM. We have also implemented 2D and 3D FFTs for radix-2 using PVM. The performance of NAS Parallel 'Benchmarks (NPB) on CRAY T3D will be compared with other highly parallel systems such as CM-5, Paragon, C90 etc.

Saini, Subhash↗

NASA NTRSDate not supplied

Development of the Suited Injury Modes and Effects Analysis for Identification of Top Injury Risks in Lunar Missions and Training

A new Exploration Extravehicular Activity Suit (xEVAS) is being designed to replace the current Extravehicular Mobility Unit (EMU) for the National Aeronautics and Space Administration’s (NASA’s) Artemis program to return astronauts to the lunar surface. This new suit will allow for increased range of motion compared the current EMU and Apollo era suits and will have additional features that will enhance the health and safety of exploration. With the design of lunar missions and the xEVAS progressing, it is important to consider possible injuries and injury mechanisms that could occur in the suit. To address these concerns, the suited Injury Modes and Effects Analysis (IMEA) was developed to outline suited injury scenarios and rank them based on risk score. The IMEA documents possible scenarios and underlying mechanisms of injury while wearing an extravehicular activity (EVA) suit. Tasks during lunar surface EVA as well as training events to prepare for lunar missions were considered as history has shown that more suit injuries occur during training than in flight. Each scenario is ranked with a consequence and likelihood scoring based on our current understanding of the suit and Artemis design reference missions to identify high-risk cases that will drive further work in suited injury. Injuries, mechanisms of injury, and mitigation strategies are evaluated within each scenario. The Suited Injury Summit was held on January 5, 2022, to vet the IMEA with external experts. This was an all-day virtual meeting with the suited injury team, ergonomists, suit engineers, safety engineers, the flight operations directorate, flight doctors, astronauts, astronaut strength, conditioning, and rehabilitation specialists (ASCRS), and external subject matter experts (SMEs). External SMEs consisted of surgeons with varying specialties. The intent of this meeting was to walk through the top injury risks identified in the analysis, identify any gaps that were not captured, and discuss mitigations. With participation from all groups, countless lessons-learned came from the Summit meeting. Using the lessons-learned and discussion from the Summit, the top 10 risks have been identified: neutral buoyancy laboratory training, hand/glove injuries, poor suit fit, field training, specific EVA tasks/design of task, boots/ankle injuries, falls from heights, background radiation, repetitive contact, and ambulation/long-distance ambulation. Mitigation steps have also been determined for each of the top risks. The IMEA and documentation of top risks is a living document. Yearly meetings are planned to update the analysis and reevaluate top risks and mitigations. The IMEA is being used to drive work in suited injury, and this work will continue to evolve with IMEA and lunar mission updates.

Teresa Reiber↗

NASA NTRSDate not supplied

Development of the Suited Injury Modes and Effects Analysis for Identification of Top Injury Risks in Lunar Missions and Training

A new Exploration Extravehicular Activity Suit (xEVAS) is being designed to replace the current Extravehicular Mobility Unit (EMU) for the National Aeronautics and Space Administration’s (NASA’s) Artemis program to return astronauts to the lunar surface. This new suit will allow for increased range of motion compared the current EMU and Apollo era suits and will have additional features that will enhance the health and safety of exploration. With the design of lunar missions and the xEVAS progressing, it is important to consider possible injuries and injury mechanisms that could occur in the suit. To address these concerns, the suited Injury Modes and Effects Analysis (IMEA) was developed to outline suited injury scenarios and rank them based on risk score. The IMEA documents possible scenarios and underlying mechanisms of injury while wearing an extravehicular activity (EVA) suit. Tasks during lunar surface EVA as well as training events to prepare for lunar missions were considered as history has shown that more suit injuries occur during training than in flight. Each scenario is ranked with a consequence and likelihood scoring based on our current understanding of the suit and Artemis design reference missions to identify high-risk cases that will drive further work in suited injury. Injuries, mechanisms of injury, and mitigation strategies are evaluated within each scenario. The Suited Injury Summit was held on January 5, 2022, to vet the IMEA with external experts. This was an all-day virtual meeting with the suited injury team, ergonomists, suit engineers, safety engineers, the flight operations directorate, flight doctors, astronauts, astronaut strength, conditioning, and rehabilitation specialists (ASCRS), and external subject matter experts (SMEs). External SMEs consisted of surgeons with varying specialties. The intent of this meeting was to walk through the top injury risks identified in the analysis, identify any gaps that were not captured, and discuss mitigations. With participation from all groups, countless lessons-learned came from the Summit meeting. Using the lessons-learned and discussion from the Summit, the top 10 risks have been identified: neutral buoyancy laboratory training, hand/glove injuries, poor suit fit, field training, specific EVA tasks/design of task, boots/ankle injuries, falls from heights, background radiation, repetitive contact, and ambulation/long-distance ambulation. Mitigation steps have also been determined for each of the top risks. The IMEA and documentation of top risks is a living document. Yearly meetings are planned to update the analysis and reevaluate top risks and mitigations. The IMEA is being used to drive work in suited injury, and this work will continue to evolve with IMEA and lunar mission updates.

Tessa Reiber↗

DOE OSTI2024

An Autonomous Critical Data Extrapolator for the AGN-201m

Nuclear nonproliferation serves as a key goal, being undertaken by the International Atomic Energy Agency (IAEA). To recognize proliferation there are two pathways that states, who intend to use nuclear material for malicious purposes can take, diversion can misuse. Diversion is when fissile nuclear material is declared to the IAEA for non-weapon purposes, but then covertly removed. If the source of nuclear material, that is not declared and not fissionable, is placed inside the reactor core to create fissile material used to create weapons then the state is using the second pathway of proliferation, misuse. With the emerging development in areas of simulation and machine learning the creation of virtual models of reactor systems, digital twins, serve as a potential method to identify proliferation through detecting anomalous behavior in the reactor. A digital twin for a physical nuclear reactor has never been developed, as digital twins serve as an emerging technology. To investigate the process for development and use of a digital twin for a nuclear reactor Idaho State University’s AGN-201m serves as the nuclear reactor used for development of this digital twin. A data acquisition system has been installed to the reactor system allowing for the transfer of collected data from a reactor operation to Idaho National Laboratory’s Deeplynx data warehouse. When utilizing data to train reactor physics and machine learning models, a significant challenge encountered is the initial state of the data. Nuclear proliferation will have the capacity to be detected when the reactor immediately starts up, nor will it occur after the reactor shuts down. Generally, it will be detected when the reactor is operating at some desired power over a sufficient period for that specific reactor design. For the AGN-201m this will be when the reactor is critical (generally 1 mW or above) for a timespan that is within or less than the range of a regular business day. Datasets sent to Deeplynx have had to be manually cut to when the reactor is critical based on plots of power levels. This method is inefficient and laborious, especially when using multiple datasets at once to train a model. To provide a more streamlined approach an automated critical data extrapolator is developed, with capabilities of recognizing when the reactor operation first reaches criticality, and when the reactor undergoes a SCRAM and is shutdown.

99 GENERAL AND MISCELLANEOUS↗

DOE OSTI2025

Virtual to Physical: Reinforcement Learning to Optimize SNS Particle Accelerator Controls

Complex accelerators must have control systems that can handle dynamic nonlinear environments. This makes traditional control methods unsuitable as they can struggle to adapt to these uncertainties. This provides an ideal environment for reinforcement learning algorithms as they are adaptable and generalizable. We present a reinforcement learning pipeline that can effectively handle the dynamics of a complex accelerator. We test and prove our pipelines capabilities on multiple environments including the Spallation Neutron Source (SNS) and the Beam Test Facility (BTF) at Oakridge National Lab (ORNL). Due to the limited time available to train an online algorithm like reinforcement learning on a real accelerator, we utilize a virtual twin accelerator (VIRAC) developed by ORNL to pretrain the policy and show its ability to converge in the virtual environment. We then test the adaptability of the pretrained RL model by applying it on the real accelerator and comparing the results. Utilizing our Scientific Optimization and Controls Toolkit (SOCT) and open-source standards such as Gymnasium we create and solve for a MEBT orbit correction problem in the SNS and an emittance maximization problem in the BTF. We show how Twin Delayed Deep Deterministic Policy Gradient (TD3) can solve this optimization environment in the virtual accelerator and transfer this policy onto the real accelerator for inference and model retraining. We show how reinforcement learning can be utilized as a control system for complex accelerators and provide a model pipeline for how an implementation performs and can be adapted to new accelerator control problems.

Kasparian, Armen [Thomas Jefferson National Accele↗

DOE OSTI2025

Hidden diversity: Transcriptomic and photosynthetic variation among common ‘wild type’ Chlamydomonas strains

The unicellular green alga Chlamydomonas reinhardtii is a widely studied reference organism, particularly in photosynthesis research. It employs photoprotective mechanisms, such as state transitions (ST) and non-photochemical quenching (NPQ), to cope with rapid light changes. Most widely used strains share a recent common ancestor yet differ by up to ~50 000 nuclear variants—genetic diversity that is often overlooked. Even among ‘wild type’ strains, we document significant phenotypic differences, such as pigment accumulation, and nutrient utilization. To elucidate the basis for this variation, we compared transcriptomes and physiological traits of seven commonly used laboratory strains, including the reference strain and the CLiP mutant library parental strain. Despite identical growth conditions, ~40% of genes were differentially expressed between strains. Most of these differences are attributable to changes that have accrued during laboratory propagation, and adverse conditions may have driven transcriptomic drift. At the physiological level, we catalog the range of strain-dependent responses related to photosynthesis and high light (HL) acclimation. Specifically, (i) all strains develop NPQ upon HL exposure, but to various degrees, (ii) they show a substantial variation in ST capacity, and (iii) they regulate the composition of the photosynthetic apparatus differently. We find that NPQ levels do not correlate with LHCSR3 expression, suggesting an additional layer of NPQ regulation. STs are constantly activated and independent of growth light intensities. Overall, our findings highlight significant strain-to-strain differences in virtually all photosynthetic parameters, emphasizing the importance of careful strain selection in future research endeavors.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2020

CSRI Summer Proceedings 2020

The Computer Science Research Institute (CSRI) brings university faculty and students to Sandia for focused collaborative research on Department of Energy (DOE) computer and computational science problems. The institute provides an opportunity for university researchers to learn about problems in computer and computational science at DOE laboratories. Participants conduct leading-edge research, interact with scientists and engineers at the laboratories, and help transfer results of their research to programs at the labs. Some specific CSRI research interest areas are: scalable solvers, optimization, adaptivity and mesh refinement, graph-based, discrete, and combinatorial algorithms, uncertainty estimation, mesh generation, dynamic load-balancing, virus and other malicious-code defense, visualization, scalable cluster computers, data-intensive computing, environments for scalable computing, parallel input/output, advanced architectures, and theoretical computer science. The CSRI Summer Program is organized by CSRI and typically includes the organization of a weekly seminar series and the publication of a summer proceedings. In 2020, the CSRI summer program was executed completely virtually; all student interns worked from home, due to the COVID-19 pandemic.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2021

Umida AG Fish Protection Prize, Cooperative Research and Development Agreement (CRADA) PNNL CRADA 487 (Final Report)

In FY2020, the National Renewable Energy Laboratory (NREL) initiated a Prize competition with support from Pacific Northwest National Laboratory (PNNL), and sponsored by the U.S. Department of Energy Water Power Technologies Office (DOE WPTO), to support the development of innovative methods for excluding fish from water diversions and intakes: the Fish Protection Prize. Proposed solutions can include new ideas for addressing fish exclusion or improvements to existing technologies. Solutions can be applied to river and canal diversions, unscreened diversion pipes, or intakes at dams. In FY20 PNNL provided voucher support in the form of technical reviews and support, as well as graphics and presentation support, in helping the 9 finalists prepare for the Pitch Contest at the American Fisheries Society (AFS) virtual meeting. There were no subject inventions, patent applications, copyrights, and trademarks under this CRADA. The report herein provides an abstract of the presentation that the finalist presented at the American Fisheries Society virtual meeting in September 2020.

13 HYDRO ENERGY↗

DOE OSTI2021

Team Bingaman-Fish Friendly Gravitational Vortex Energy System - Fish Protection Prize (Final Report)

In FY2020, the National Renewable Energy Laboratory (NREL) initiated a Prize competition with support from Pacific Northwest National Laboratory (PNNL), and sponsored by the U.S. Department of Energy Water Power Technologies Office (DOE WPTO), to support the development of innovative methods for excluding fish from water diversions and intakes: the Fish Protection Prize. Proposed solutions can include new ideas for addressing fish exclusion or improvements to existing technologies. Solutions can be applied to river and canal diversions, unscreened diversion pipes, or intakes at dams. In FY20 PNNL provided voucher support in the form of technical reviews and support, as well as graphics and presentation support, in helping the 9 finalists prepare for the Pitch Contest at the American Fisheries Society (AFS) virtual meeting. There were no subject inventions, patent applications, copyrights, and trademarks under this CRADA. The report herein provides an abstract of the presentation that the finalist presented at the American Fisheries Society virtual meeting in September 2020.

42 ENGINEERING↗

DOE OSTI2021

Team Rackovan - Alden - Fish Entrainment Reduction Structure (FERS) - Fish Protection Prize (Final Report)

In FY2020, the National Renewable Energy Laboratory (NREL) initiated a Prize competition with support from Pacific Northwest National Laboratory (PNNL), and sponsored by the U.S. Department of Energy Water Power Technologies Office (DOE WPTO), to support the development of innovative methods for excluding fish from water diversions and intakes: the Fish Protection Prize. Proposed solutions can include new ideas for addressing fish exclusion or improvements to existing technologies. Solutions can be applied to river and canal diversions, unscreened diversion pipes, or intakes at dams. In FY20 PNNL provided voucher support in the form of technical reviews and support, as well as graphics and presentation support, in helping the 9 finalists prepare for the Pitch Contest at the American Fisheries Society (AFS) virtual meeting. There were no subject inventions, patent applications, copyrights, and trademarks under this CRADA. The report herein provides an abstract of the presentation that the finalist presented at the American Fisheries Society virtual meeting in September 2020.

42 ENGINEERING↗