Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “transformations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Conductor requirements for high-temperature superconducting utility power transformers

High-temperature superconducting (HTS) coated conductors in utility power transformers must satisfy a set of operating requirements that are driven by two major considerations-HTS transformers must be economically competitive with conventional units, and the conductor must be robust enough to be used in a commercial manufacturing environment. The transformer design and manufacturing process will be described in order to highlight the various requirements that it imposes on the HTS conductor. Spreadsheet estimates of HTS transformer costs allow estimates of the conductor cost required for an HTS transformer to be competitive with a similarly performing conventional unit.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optimizing BAO measurements with non-linear transformations of the Lyman-α forest

We explore the effect of applying a non-linear transformation to the Lyman-α forest transmitted flux F=e{sup −τ} and the ability of analytic models to predict the resulting clustering amplitude. Both the large-scale bias of the transformed field (signal) and the amplitude of small scale fluctuations (noise) can be arbitrarily modified, but we were unable to find a transformation that increases significantly the signal-to-noise ratio on large scales using Taylor expansion up to the third order. In particular, however, we achieve a 33% improvement in signal to noise for Gaussianized field in transverse direction. On the other hand, we explore an analytic model for the large-scale biasing of the Lyα forest, and present an extension of this model to describe the biasing of the transformed fields. Using hydrodynamic simulations we show that the model works best to describe the biasing with respect to velocity gradients, but is less successful in predicting the biasing with respect to large-scale density fluctuations, especially for very nonlinear transformations.

79 ASTRONOMY AND ASTROPHYSICS↗

Deterministic transformations of multipartite entangled states with tensor rank 2

Transformations involving only local operations assisted with classical communication are investigated for multipartite entangled pure states having tensor rank 2. All necessary and sufficient conditions for the possibility of deterministically converting truly multipartite, rank-2 states into each other are given. Furthermore, a chain of local operations that successfully achieves the transformation has been identified for all allowed transformations. The identified chains have two nice features: (1) each party needs to carry out at most one local operation and (2) all of these local operations are also deterministic transformations by themselves. Finally, it is found that there are disjoint classes of states, all of which can be identified by a single real parameter, which remain invariant under deterministic transformations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Role of point defects in stress-induced martensite transformations in NiTi shape memory alloys: A molecular dynamics study

Shape-memory properties of equiatomic NiTi rely on the thermal- or stress-induced reversible martensitic phase transformation between the $\textit{B}$2 and $\textit{B}$19' phases. Irradiation defects suppress thermal-induced transformations, but their effects on stress-induced transformations are poorly understood. In this work, we use molecular dynamics to investigate the effect of vacancies, vacancy clusters, interstitials, and antisite defects on stress-induced transformations. All defects suppress the transformation, but vacancy clusters do so to the greatest extent, while antisite defects do so to the least extent. The responsible mechanisms are grain boundary pinning and chemical disordering.

36 MATERIALS SCIENCE↗

Predicting kinetics of polymorphic transformations from structure mapping and coordination analysis

To extend materials design and discovery into the space of metastable polymorphs, rapid and reliable assessment of transformation kinetics to lower energy structures is essential. Herein we focus on diffusionless polymorphic transformations and investigate routes to assess their kinetics using solely crystallographic arguments. As part of this investigation we developed a general algorithm to map crystal structures onto each other, and ascertain the low-energy (fast-kinetics) transformation pathways between them. Pathways with minimal dissociation of chemical bonds, along which the number of bonds (in ionic systems the first-shell coordination) does not decrease below that in the end structures, are shown to always be the fast-kinetics pathways. These findings enable the rapid assessment of the kinetics of polymorphic transformation and the identification of long-lived metastable structures. In conclusion, the utility is demonstrated on a number of transformations including those between high-pressure SnO 2 phases, which lack a detailed atomic-level understanding.

36 MATERIALS SCIENCE↗

Analyzing Distribution Transformer Degradation with Increased Power Electronic Loads

The influx of non-linear power electronic loads into the distribution network has the potential to disrupt the existing distribution transformer operations. They were not designed to mediate the excessive heating losses generated from the harmonics. To have a good understanding of current standing challenges, a knowledge of the generation and load mix as well as the current harmonic estimations are essential for designing transformers and evaluating their performance. In this paper, we investigate a mixture of essential power electronic loads for a household designed in PSCAD/EMTdc and their potential impacts on transformer eddy current losses and derating using harmonic analysis. Our findings reveal that in the presence of high power electronic loads (especially third harmonics), increasing PV generation may worsen transformer degradation. However, with a low amount of power electronic loads, additional PV generation helps to reduce the harmonic content in the current and improve transformer performance.

eddy current, harmonics, PV, THD, power transforme↗

A 50 kA Superconducting Transformer for the Upcoming High-Field High-Current Testing Station at the BNL

Brookhaven national laboratory is upgrading its existing user facility to support R&D for High Energy Physics (HEP) and Fusion Energy Sciences (FES). The goal of this upgrade is to host the testing of the superconducting cables, conductors, joints and insert coils under high magnetic field (10 T), with currents up to 50 kA (present limit 20 kA) and at temperatures varying from 4 K to 40 K. To provide a current up to 50 kA to the sample, a superconducting core-less transformer is under construction. The superconducting transformer would additionally reduce the heat loss at the current leads at high currents. The SC transformer consists of two coaxial coils. The primary coil is inside the secondary coil. The primary coil consists of 3048 turns of rectangular wires (1.91 mm x 1.27 mm), wound in 24 layers. The secondary coil consists of 13 turns of the secondary cable (18.35 mm x 5.96 mm), wound in one layer. The parameters of the transformer are chosen to satisfy the space restrictions while using the available conductor. Here this paper presents the design of the 50-kA transformer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Viral‐mediated delivery of morphogenic regulators enables leaf transformation in Sorghum bicolor (L.)

Recent advancements in monocot transformation, using leaf tissue as explant material, have expanded the number of grass species capable of transgenesis. However, the complexity of vectors and reliance on inducible excision of essential morphogenic regulators have so far limited widespread application. Plant RNA viruses, such as Foxtail Mosaic Virus (FoMV), present a unique opportunity to express morphogenic regulator genes, such as Babyboom (Bbm), Wuschel2 (Wus2), Wuschel-like homeobox protein 2a (Wox2a) and the GROWTH-REGULATING FACTOR 4 (GRF4) GRF-INTERACTING FACTOR 1 (GIF1) fusion protein transiently in leaf explant tissues. Furthermore, altruistic delivery of conventional and viral vectors could provide opportunities to simplify vectors used for leaf transformation—facilitating vector optimization and reducing reliance on morphogenic regulator gene integration. In this study, both viral and conventional T-DNA vectors were tested for their ability to promote the formation of embryonic calli, a critical step in leaf transformation protocols, using Sorghum bicolor leaf explants. Although conventional leaf transformation vectors yielded viable embryonic calli (43.2 ± 2.9%: GRF4-GIF1, 50.2 ± 3%: Bbm/Wus2), altruistic conventional vectors employing the GRF4-GIF1 morphogenic regulator resulted in improved efficiencies (61.3 ± 4.7%). Altruistic delivery was further enhanced with the use of viral vectors employing both GRF4-GIF1 and Bbm/Wus2 regulators, resulting in 75.1 ± 2.3% and 79.2 ± 2.5% embryonic calli formation, respectively. Embryonic calli generated from both conventional and viral vectors produced shoots expressing fluorescent reporters, which were confirmed using molecular analysis. This work provides an important proof-of-concept for the use of both altruistic vectors and viral-expressed morphogenic regulators for improving plant transformation.

59 BASIC BIOLOGICAL SCIENCES↗

WE-AB-303-07: Computational Monitoring Framework of Four-Dimensional Dose Distributions During Treatment Time Based On a 2D/3D Registration with Adaptive Transformation Parameters in Lung Stereotactic Body Radiotherapy

Purpose: The aim of this study was to develop a computational framework for monitoring four-dimensional (4D) dose distributions during treatment time based on a 2D/3D registration with adaptive transformation parameters (ATPs) in lung stereotactic body radiotherapy (SBRT). Methods: The 4D dose distributions during the SBRT were calculated by applying a pencil beam convolution (PBC) algorithm to simulated 4D-computed tomography (CT) images during treatment time (hereinafter referred to as “treatment” 4D-CT images). The “treatment” 4D-CT images were derived by deforming 3D planning CT images by using transformation parameters so that 2D planning portal dose images (PDIs) can resemble 2D dynamic clinical PDIs in each frame, which were derived from electronic portal imaging device (EPID) images. The transformation parameters were optimized by the Levenberg- Marquardt (LM) algorithm. The optimized transformation parameters in a certain frame were adaptively employed as initial transformation parameters for optimization of the parameters in the consecutive frame. Gamma pass rates (3mm/3%) between dynamic clinical PDIs and dynamic “treatment” PDIs derived from the “treatment” 4D-CT images were measured for comparing the proposed frameworks without and with the ATPs. These proposed frameworks were applied to the EPID dynamic images (40 frames) of two patients with lung cancer, who underwent the SBRT. Results: Gamma pass rates without and with the ATPs were 83.01±4.42% and 89.31±3.18% on average, respectively (p<0.05). Moreover, percentage errors between prescribed doses and estimated doses at an isocenter by the proposed frameworks without and with the ATPs were 10.67±5.66% and 6.34±0.47% on average, respectively (p<0.05). Conclusion: The proposed framework with ATPs could be useful to ensure the quality of the SBRT by monitoring 4D dose distributions during treatment time.

60 APPLIED LIFE SCIENCES↗

Determination of the normal and anomalous hall effect coefficients in ferromagnetic Ni{sub 50}Mn{sub 35}In{sub 15-x}Si{sub x} Heusler alloys at the martensitic transformation

The magnetization, the electrical resistivity, the magnetoresistance, and the Hall resistivity of Ni{sub 50}Mn{sub 35}In{sub 15-x}Si{sub x} (x = 1.0, 3.0, 4.0) Heusler alloys are studied at T = 80-320 K. The martensitic transformation in these alloys occurs at T = 220-280 K from the high-temperature ferromagnetic austenite phase into the low-temperature martensite phase having a substantially lower magnetization. A method is proposed to determine the normal and anomalous Hall effect coefficients in the presence of magnetoresistance and a possible magnetization dependence of these coefficients. The resistivity of the alloys increases jumpwise during the martensitic transformation, reaches 150-200 {mu}{Omega} cm, and is almost temperature-independent. The normal Hall effect coefficient is negative, is higher than that of nickel by an order of magnitude at T = 80 K, decreases monotonically with increasing temperature, approaches zero in austenite, and does not undergo sharp changes in the vicinity of the martensitic transformation. At x = 3, a normal Hall effect nonlinear in magnetization is detected in the immediate vicinity of the martensitic transformation. The temperature dependences of the anomalous Hall effect coefficient in both martensite and austenite and, especially, in the vicinity of the martensitic transformation cannot be described in terms of the skew scattering, the side jump, and the Karplus-Lutinger mechanisms from the anomalous Hall effect theory. The possible causes of this behavior of the magnetotransport properties in Heusler alloys are discussed.

36 MATERIALS SCIENCE↗

Techniques for Polytypic Transformations in Silicon Carbide

Abstract—: Two main polytype transformations in silicon carbide, namely, 2H → 6H and 3C → 6H, have been studied by ab initio methods. It has been shown that the intermediate phases with trigonal symmetry P3m1 and monoclinic symmetry Cm make it much easier to move the close-packed layers in such transitions by breaking them up into separate stages. It has been found that these two polytype transformations proceed in completely different ways. The links being relocated noticeably tilted compared to their initial position at the transition 2H → 6H, which allows the compression of the SiC links in the plane (11 2-bar 0). The transition 3C → 6H is carried out through the formation of Si–Si and C–C auxiliary links, living for a short time and helping densely packed layers to swap places. As a result, the activation barrier of the transformation 2H → 6H (1.7 eV/atom) is significantly less than the activation barrier of the transformation 3C → 6H (3.6 eV/atom), which means that the second transition should occur at the temperatures by 750–800°C higher than the first one. The energy profiles of this polytypic transformations, as well as the geometry of all intermediate and transition phases have been calculated. It has been shown that all the transition states have monoclinic symmetry.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The FAST technique: a simplified Agrobacterium -based transformation method for transient gene expression analysis in seedlings of Arabidopsis and other plant species

Plant genome sequencing has resulted in the identification of a large number of uncharacterized genes. To investigate these unknown gene functions, several transient transformation systems have been developed as quick and convenient alternatives to the lengthy transgenic assay. These transient assays include biolistic bombardment, protoplast transfection and Agrobacterium-mediated transient transformation, each having advantages and disadvantages depending on the research purposes. We present a novel transient assay based on cocultivation of young Arabidopsis (Arabidopsis thaliana) seedlings with Agrobacterium tumefaciens in the presence of a surfactant which does not require any dedicated equipment and can be carried out within one week from sowing seeds to protein analysis. This Fast Agro-mediated Seedling Transformation (FAST) was used successfully to express a wide variety of constructs driven by different promoters in Arabidopsis seedling cotyledons (but not roots) in diverse genetic backgrounds. Localizations of three previously uncharacterized proteins were identified by cotransformation with fluorescent organelle markers. The FAST procedure requires minimal handling of seedlings and was also adaptable for use in 96-well plates. The high transformation efficiency of the FAST procedure enabled protein detection from eight transformed seedlings by immunoblotting. Protein-protein interaction, in this case HY5 homodimerization, was readily detected in FAST-treated seedlings with Förster resonance energy transfer and bimolecular fluorescence complementation techniques. Initial tests demonstrated that the FAST procedure can also be applied to other dicot and monocot species, including tobacco, tomato, rice and switchgrass. The FAST system provides a rapid, efficient and economical assay of gene function in intact plants with minimal manual handling and without dedicated device. This method is potentially ideal for future automated high-throughput analysis.

54 ENVIRONMENTAL SCIENCES↗

Data for "Viral-mediated Delivery of Morphogenic Regulators Enables Leaf Transformation in Sorghum bicolor (L.)"

Recent advancements in monocot transformation, using leaf tissue as explant material, have expanded the number of grass species capable of transgenesis. However, the complexity of vectors and reliance on inducible excision of essential morphogenic regulators have so far limited widespread application. Plant RNA viruses, such as Foxtail Mosaic Virus (FoMV), present a unique opportunity to express morphogenic regulator genes, such as Babyboom ( Bbm ), Wuschel2 ( Wus2 ), Wuschel-like homeobox protein 2a ( Wox2a ) and the GROWTH-REGULATING FACTOR 4 (GRF4) GRF-INTERACTING FACTOR 1 (GIF1) fusion protein transiently in leaf explant tissues. Furthermore, altruistic delivery of conventional and viral vectors could provide opportunities to simplify vectors used for leaf transformation—facilitating vector optimization and reducing reliance on morphogenic regulator gene integration. In this study, both viral and conventional T-DNA vectors were tested for their ability to promote the formation of embryonic calli, a critical step in leaf transformation protocols, using Sorghum bicolor leaf explants. Although conventional leaf transformation vectors yielded viable embryonic calli (43.2 ± 2.9%: GRF4-GIF1, 50.2 ± 3%: Bbm/Wus2), altruistic conventional vectors employing the GRF4-GIF1 morphogenic regulator resulted in improved efficiencies (61.3 ± 4.7%). Altruistic delivery was further enhanced with the use of viral vectors employing both GRF4-GIF1 and Bbm/Wus2 regulators, resulting in 75.1 ± 2.3% and 79.2 ± 2.5% embryonic calli formation, respectively. Embryonic calli generated from both conventional and viral vectors produced shoots expressing fluorescent reporters, which were confirmed using molecular analysis. This work provides an important proof-of-concept for the use of both altruistic vectors and viral-expressed morphogenic regulators for improving plant transformation.

gene editing↗

The role of irradiation on deformation-induced martensitic phase transformations in face-centered cubic alloys

Localized deformation, including that by the deformation-induced shearing martensitic phase transformation, is responsible for hardening and embrittlement in irradiated face-centered cubic alloys. These localized deformation processes can have profound consequences on the mechanical integrity of common structural metals used in extreme radiation environments such as nuclear reactors. This article aims to review and understand exactly how irradiation affects the martensitic phase transformation in face-centered cubic alloys, with an emphasis on austenitic stainless steel, given its ubiquity in the archival literature. The influence of irradiation on stacking fault energy and subsequent implications on the phase transformation are discussed. Mechanisms by which irradiation-induced microstructures enhance the phase transformation are also described, including the surface energy contribution of irradiation-induced cavities (i.e., voids and bubbles) toward the critical martensite nucleation energy, and partial dislocation–cavity interactions. In conclusion, a deformation mechanism map illustrates how irradiation-induced cavities can modulate the martensitic transformation pathway.

36 MATERIALS SCIENCE↗

Electrical Core Transformer for Grid Improvement Incorporating Wire Magnetic Components

The research reported herein adds to the understanding of oil-immersed distribution transformers by exploring and demonstrating potential improvements in efficiency and cost utilizing the unique Buswell approach wherein the unit is redesigned, replacing magnetic sheet with wire allowing for improvements in configuration and increased simplicity in the build process. Exploration of new designs is a critical component in our drive to assure reduction of energy waste, adequate delivery to the citizenry, and the robustness of U.S. manufacturing. By moving that conversation forward, this exploration adds greatly to our base of knowledge and clearly outlines an important avenue for further exploration. This final report shows several advantages of this new transformer type (outlined in a report signed by all of our collaborating partners and included in this document). Although materials development is required to achieve commercial potential, the clear benefits of the technology if that development were a given is established. Exploration of new transformer types and further work on the Buswell design approach is in the best interest of the public, industry, and the United States. Public benefits accrue from design alternatives that reduce the overall use of energy, but it must be acknowledged that new DOE energy efficiency standards have provided some assurance in that regard. Nonetheless the burden of achieving these new standards has been largely shifted to the manufacturers of oil-immersed distribution transformers with cost increasing up to 20% of some units versus 2006 when this investigation was started. Further, rising costs have forced the industry to look closely are far more expensive technologies which may threaten U.S. competitiveness in the distribution transformer market. This concern is coupled with the realization that many units in the nation's grid are beyond their optimal life which suggests that the nation may be headed for an infrastructure crisis that U.S. industry is ill prepared to handle which could further challenge U.S. competitiveness.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

COMPOSE-HPC: A Transformational Approach to Exascale

The goal of the COMPOSE-HPC project is to 'democratize' tools for automatic transformation of program source code so that it becomes tractable for the developers of scientific applications to create and use their own transformations reliably and safely. This paper describes our approach to this challenge, the creation of the KNOT tool chain, which includes tools for the creation of annotation languages to control the transformations (PAUL), to perform the transformations (ROTE), and optimization and code generation (BRAID), which can be used individually and in combination. We also provide examples of current and future uses of the KNOT tools, which include transforming code to use different programming models and environments, providing tests that can be used to detect errors in software or its execution, as well as composition of software written in different programming languages, or with different threading patterns.

99 GENERAL AND MISCELLANEOUS↗

Insulating Nanofluids and Solids to Upgrade our Large Aging Transformer Equipment (Advanced Research Projects Agency – Energy Research Final Report)

This project developed a highly promising, minimally invasive pathway for transformers with up to double the thermal life that is achieved today. Thermal life is important because it is occasionally necessary to overload transformers in service and this overload raises the internal temperature, accelerating aging2. A seminal initial finding in the research was that a likely achievable increase in the thermal conductivity of the transformer paper could double the thermal life. Oil-impregnated paper is used to wrap the electrical conductors in a transformer to provide a good balance of electrical insulation and thermal conductivity. The novel approach to increase the thermal conductivity was to add micrometer boron nitride particles to the paper during manufacturing. This is encouraging because it provides benefits with minimal impact on the manufacturing processes of the paper or of a transformer.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Elucidating Bioreductive Transformations within Physically Complex Media: Impact on the Fate and Transport of Uranium and Chromium

In situ stabilization (inclusive of natural attenuation) of toxic metals and radionuclides is an attractive approach for remediating many contaminated DOE sites. By immobilizing toxic metals and radionuclides in place, the removal of contaminated water to the surface for treatment as well as the associated disposal costs are avoided. To enhance in situ remediaton, microbiological reductive stabilization of contaminant metals has been, and continues to be, actively explored. It is likely that surface and subsurface microbial activity can alter the redox state of toxic metals and radionuclides, either directly or indirectly, so they are rendered immobile. Furthermore, anaerobic bacterial metabolic products will help to buffer pulses of oxidation, typically from fluxes of nitrate or molecular oxygen, and thus may stabilize reduced contaminants from oxidative mobilization. Uranium and chromium are two elements of particular concern within the DOE complex that, owing to their abundance and toxicity, appear well suited for biologically mediated reductive stabilization. Subsurface microbial activity can alter the redox state of toxic metals and radionuclides, rending them immobile. Imparting an important criterion on the probability that contaminants will undergo reductive stabilization, however, is the chemical and physical heterogeneity of the media. Our research first examined microbially induced transformation of iron (hydr)oxide minerals and their impact on contaminant attenuation. We revealed that in intricate cascade of geochemical reactions is induced by microbially produced Fe(II), and that during transformation contaminants such as U(VI) can be incorporated into the structure, and a set of Fe(II) bearing solids capable of reducing Cr(VI) and stabilizing resulting Cr(III). We also note, however, that common subsurface constituents such as phosphate can modify iron oxide transformation pathways and thus impact contaminant sequestration—affecting both Cr and U stabilization. We extended our work to explore factors controlling the sequestration of uranium in the subsurface, with a particular emphasis on mineralogic and geochemical complexity. We reveal that one of the primary factors controlling uranium reduction, via both biological and chemical pathways, is the aqueous speciation of U(VI). Specifically, ternary calcium-uranyl-carbonato complexes stabilize U(VI) relative to reduction. However, countering the lack of reduction, we note a novel sequestration pathway in which the U(VI), as the uranate ion, is incorporated into the structure of transformation iron oxides; magnetite and goethite, both products of Fe(II) induced transformation of ferrihydrite, harbor appreciable quantities of uranium. In sum, our results provide important information on predicting and potentially controlling the migration of chromium and uranium within the DOE complex.

54 ENVIRONMENTAL SCIENCES↗