Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “technology acceptance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Aircraft systems design studies employing advanced transport technologies

System and design integration studies are presented to define and assess the application of the advanced technology most likely to result in a superior next generation, high subsonic/sonic conventional takeoff and landing transport aircraft system. It is concluded that the new technologies can be directed toward the achievement of improved economy and performance. These benefits may be used to compensate for the penalties associated with reduced noise requirements anticipated to make future aircraft ecologically acceptable.

Downie, B.↗
NASA NTRS1976

Preliminary simulation of an advanced, hingless rotor XV-15 tilt-rotor aircraft

The feasibility of the tilt-rotor concept was verified through investigation of the performance, stability and handling qualities of the XV-15 tilt rotor. The rotors were replaced by advanced-technology fiberglass/composite hingless rotors of larger diameter, combined with an advanced integrated fly-by-wire control system. A parametric simulation model of the HRXV-15 was developed, model was used to define acceptable preliminary ranges of primary and secondary control schedules as functions of the flight parameters, to evaluate performance, flying qualities and structural loads, and to have a Boeing-Vertol pilot conduct a simulated flight test evaluation of the aircraft.

Mcveigh, M. A.↗
NASA NTRS1978

Can low-cost VOR and Omega receivers suffice for RNAV - A new computer-based navigation technique

It is shown that although RNAV is particularly valuable for the personal transportation segment of general aviation, it has not gained complete acceptance. This is due, in part, to its high cost and the necessary special-handling air traffic control. VOR/DME RNAV calculations are ideally suited for analog computers, and the use of microprocessor technology has been suggested for reducing RNAV costs. Three navigation systems, VOR, Omega, and DR, are compared for common navigational difficulties, such as station geometry, siting errors, ground disturbances, and terminal area coverage. The Kalman filtering technique is described with reference to the disadvantages when using a system including standard microprocessors. An integrated navigation system, using input data from various low-cost sensor systems, is presented and current simulation studies are noted.

Hollaar, L. A.↗
NASA NTRS1980

Coal gasifier cogeneration powerplant project

Industrial cogeneration and utility pr systems were analyzed and a conceptual design study was conducted to evaluate the economic feasibility of a coal gasifier power plant for NASA Lewis Research Center. Site location, plant size, and electric power demand were considered in criteria developed for screening and selecting candidates that could use a wide variety of coals, including that from Ohio. A fluidized bed gasifier concept was chosen as the baseline design and key components of the powerplant were technically assessed. No barriers to environmental acceptability are foreseen. If funded, the powerplant will not only meet the needs of the research center, but will reduce the commercial risk for utilities and industries by fully verifying and demonstrating the technology, thus accelerating commercialization.

Shure, L. I.↗
NASA NTRS1987

Deep, Precise Etching in Semiconductors

Semiconductors made to accept precise etching after pretreatment. Combination of material destabilization and anisotropic etching permits formation of precise perpendicular-wall cavities in silicon wafers and other semiconductors. New technique extends capabilities of current micromachining technology to fabrication of submillimeter waveguide arrays and filters. Pre-etching process currently used to fabricate thin-walled arrays of submillimeter waveguides for use as dichroic bandpass filters. Possible applications include integration of sensor probes and processing of circuitry on same silicon chip.

Shlichta, P. J.↗
NASA NTRS1992

High-speed civil transport - Advanced flight deck challenges

This paper presents the results of a nine month study of the HSCT flight deck challenges and assessment of its benefits. Operational requirements are discussed and the most significant findings for specified advanced concepts are highlighted. These concepts are a no nose-droop configuration, a far forward cockpit location and advanced crew monitoring and control of complex systems. Results indicate that the no nose-droop configuration is critically dependent on the design and development of a safe, reliable and certifiable synthetic vision system (SVS). This configuration would cause significant weight, performance and cost penalties. A far forward cockpit configuration with a tandem seating arrangement allows either an increase in additional payload or potential downsizing of the vehicle leading to increased performance efficiency and reductions in emissions. The technologies enabling such capabilities, which provide for Category III all-weather opreations on every flight represent a benefit multiplier in a 20005 ATM network in terms of enhanced economic viability and environmental acceptability.

Swink, Jay R.↗
NASA NTRS1993

Recent laboratory studies of loudness and annoyance to sonic booms

NASA Langley Research Center is supporting NASA High-Speed Research Program efforts to develop an updated technology base for future high-speed civil transport aircraft. Part of this effort involves (a) quantification of loudness and annoyance benefits due to sonic boom shaping and (b) determination of boom exposures acceptable to the public. Langley is conducting a series of laboratory studies to investigate in detail the subjective reactions to a wide range of shaped sonic boom signatures and to examine several metrics as estimators of sonic boom subjective effects. Results from several of these studies, as well as results obtained by other investigators, demonstrated that substantial reductions in the loudness of sonic booms can be achieved by careful shaping of the boom signatures. Recent Langley studies extended this work to include: (a) quantification of subjective effects due to booms heard indoors, (b) determination of subjective reactions due to ground-reflected booms, and (c) determination of subjective reactions to simulator reproductions of booms recently at White Sands Missile Range.

Leatherwood, Jack D.↗
NASA NTRS1998

New Parallel Algorithms for Structural Analysis and Design of Aerospace Structures

Subspace and Lanczos iterations have been developed, well documented, and widely accepted as efficient methods for obtaining p-lowest eigen-pair solutions of large-scale, practical engineering problems. The focus of this paper is to incorporate recent developments in vectorized sparse technologies in conjunction with Subspace and Lanczos iterative algorithms for computational enhancements. Numerical performance, in terms of accuracy and efficiency of the proposed sparse strategies for Subspace and Lanczos algorithm, is demonstrated by solving for the lowest frequencies and mode shapes of structural problems on the IBM-R6000/590 and SunSparc 20 workstations.

Nguyen, Duc T.↗
NASA NTRS1999

Textural-Contextual Labeling and Metadata Generation for Remote Sensing Applications

Despite the extensive research and the advent of several new information technologies in the last three decades, machine labeling of ground categories using remotely sensed data has not become a routine process. Considerable amount of human intervention is needed to achieve a level of acceptable labeling accuracy. A number of fundamental reasons may explain why machine labeling has not become automatic. In addition, there may be shortcomings in the methodology for labeling ground categories. The spatial information of a pixel, whether textural or contextual, relates a pixel to its surroundings. This information should be utilized to improve the performance of machine labeling of ground categories. Landsat-4 Thematic Mapper (TM) data taken in July 1982 over an area in the vicinity of Washington, D.C. are used in this study. On-line texture extraction by neural networks may not be the most efficient way to incorporate textural information into the labeling process. Texture features are pre-computed from cooccurrence matrices and then combined with a pixel's spectral and contextual information as the input to a neural network. The improvement in labeling accuracy with spatial information included is significant. The prospect of automatic generation of metadata consisting of ground categories, textural and contextual information is discussed.

Kiang, Richard K.↗
NASA NTRS1999

The Calculation of Fractal Dimension in the Presence of Non-Fractal Clutter

The area of information processing has grown dramatically over the last 50 years. In the areas of image processing and information storage the technology requirements have far outpaced the ability of the community to meet demands. The need for faster recognition algorithms and more efficient storage of large quantities of data has forced the user to accept less than lossless retrieval of that data for analysis. In addition to clutter that is not the object of interest in the data set, often the throughput requirements forces the user to accept "noisy" data and to tolerate the clutter inherent in that data. It has been shown that some of this clutter, both the intentional clutter (clouds, trees, etc) as well as the noise introduced on the data by processing requirements can be modeled as fractal or fractal-like. Traditional methods using Fourier deconvolution on these sources of noise in frequency space leads to loss of signal and can, in many cases, completely eliminate the target of interest. The parameters that characterize fractal-like noise (predominately the fractal dimension) have been investigated and a technique to reduce or eliminate noise from real scenes has been developed. Examples of clutter reduced images are presented.

Herren, Kenneth A.↗
NASA NTRS2005

Sabatier Methanation Reactor for Space Exploration

The Sabatier Methanation Reactor technology is of vital importance to the success of the human and robotic exploration program. In order to achieve an affordable program, the logistics supply to support the mission must be minimized to the fullest extent possible. One area of potential reduction with high return on investment is the closure of life support loops, particularly oxygen and water. The Sabatier system accomplishes this by utilizing hydrogen and carbon dioxide, waste products from the life support system, to produce water and methane. The recovered water is then recycled back into the life support system to provide oxygen; while the methane can be used for propulsion, or can be broken down further to recover the hydrogen. This technology is applicable not only to transit phases of exploration, but surface habitats as well as in-situ propellant production. The Sabatier Reactor system has been developed for ground based demonstration experiments extensively over the past 30 years. Over the past three years, NASA has funded development of the Sabatier Carbon Dioxide Reduction Assembly (CRA) for use on the ISS. Currently this system is at TRL 5 and it is expected that the system will be flown on the ISS as a flight experiment, The purpose of the flight experiment is to integrate the Sabatier CRA into a synchronized system with the oxygen generation system and the carbon dioxide concentrator. The flight experiment will verify the integration of the different systems working together plus it will verify the capability of the system to operate, and effectively separate its products in a micro-gravity environment. Subsequent to design validation, the flight experiment can remain onboard the ISS providing valuable water to offset logistics re-supply requirements. Some of the challenges facing the development of the Sabatier system include handling vibration induced particulates, microgravity phase separation and containment of hazardous gases. Plans for adequately addressing these issues will be presented. The Sabatier carbon dioxide reduction process will greatly benefit any of the extended duration human exploration missions because of the tremendous savings of consumables realized. Any of these mission scenarios, be they transit or surface based, must consider closing the life support loops in order to make the mission achievable, let alone affordable. Carbon dioxide reduction technology will be necessary for future outpost habitats, and the technology needs to be proven viable in a space application. The Sabatier methanation reaction is also a desirable method for producing propellant from the Mars atmosphere. The common system could be designed to accept carbon dioxide from an indoor air revitalization loop concentrator, or from an outdoor atmosphere compressor. Carbon dioxide reduction validation is but one step in the spiral development of the in-situ propellant production system desired for future planetary exploration.

Murdoch, Karen↗
NASA NTRS2011

Mapping a Path to Autonomous Flight in the National Airspace

The introduction of autonomous flight, whether military, commercial, or civilian, into the National Airspace System (NAS) will present significant challenges. Minimizing the impact and preventing the changes from becoming disruptive, rather than an enhancing technology will not be without difficulty. From obstacle detection and avoidance to real-time verification and validation of system behavior, there are significant problems which must be solved prior to the general acceptance of autonomous systems. This paper examines some of the key challenges and the multi-disciplinary collaboration which must occur for autonomous systems to be accepted as equal partners in the NAS.

Lodding, Kenneth N.↗
NASA NTRS2013

The Tailoring of Traditional Systems Engineering for the Morpheus Project

NASA's Morpheus Project has developed and tested a prototype planetary lander capable of vertical takeoff and landing that is designed to serve as a testbed for advanced spacecraft technologies. The lander vehicle, propelled by a LOX/Methane engine and sized to carry a 500kg payload to the lunar surface, provides a platform for bringing technologies from the laboratory into an integrated flight system at relatively low cost. From the beginning, one of goals for the Morpheus Project was to streamline agency processes and practices. The Morpheus project accepted a challenge to tailor the traditional NASA systems engineering approach in a way that would be appropriate for a lower cost, rapid prototype engineering effort, but retain the essence of the guiding principles. The team has produced innovative ways to create an infrastructure and approach that would challenge existing systems engineering processes while still enabling successful implementation of the current Morpheus Project. This paper describes the tailored systems engineering approach for the Morpheus project, including the processes, tools, and amount of rigor employed over the project's multiple lifecycles since the project began in FY11. Lessons learned from these trials have the potential to be scaled up and improve efficiency on a larger projects or programs.

Devolites, Jennifer L.↗
NASA NTRS2015

Advanced Stirling Convertor (ASC) Technology Maturation

The Advanced Stirling Convertor (ASC) development effort was initiated by NASA Glenn Research Center (GRC) with contractor Sunpower Inc. to develop high efficiency thermal-to-electric power conversion technology for NASA Radioisotope Power Systems. Early successful performance demonstrations led to the expansion of the project as well as adoption of the technology by the Department of Energy (DOE) and system integration contractor Lockheed Martin Space Systems Company as part of the Advanced Stirling Radioisotope Generator (ASRG) flight project. The ASRG integrates a pair of ASCs to convert the heat from a pair of General Purpose Heat Source (GPHS) modules into electrical power. The expanded NASA ASC effort included development of several generations of ASC prototypes or Engineering Units to help prepare the ASC technology and Sunpower for flight implementation. Sunpower later had two parallel contracts allowing the last of the NASA Engineering Units called ASC-E3 to serve as pathfinders for the ASC-F flight convertors being built for DOE. The ASC-E3 convertors utilized the ASC-F flight specifications and were built using the ASC-F design and process documentation. Shortly after the first ASC-F Pair achieved initial operation, due to budget constraints, the DOE ASRG flight development contract was terminated. NASA continues to invest in the development of Stirling RPS technology including continued production of the ASC-E3 convertors, seven of which have been delivered with one additional unit in production. Starting in FY2015, Stirling Convertor Technology Maturation has been reorganized as an element of the RPS Stirling Cycle Technology Development (SCTD) Project and long-term plans for continued Stirling technology advancement are in reformulation. This paper provides a status on the ASC project, an overview of advancements made in the design and production of the ASC at Sunpower, and a summary of acceptance tests, reliability tests, and tactical tests at NASA GRC that demonstrate the capabilities of the ASC.

radioisotope↗
NASA NTRS2016

Advanced Stirling Convertor (ASC) Technology Maturation

The Advanced Stirling Convertor (ASC) development effort was initiated by NASA Glenn Research Center with contractor Sunpower, Inc., to develop high-efficiency thermal-to-electric power conversion technology for NASA Radioisotope Power Systems (RPSs). Early successful performance demonstrations led to the expansion of the project as well as adoption of the technology by the Department of Energy (DOE) and system integration contractor Lockheed Martin Space Systems Company as part of the Advanced Stirling Radioisotope Generator (ASRG) flight project. The ASRG integrates a pair of ASCs to convert the heat from a pair of General Purpose Heat Source (GPHS) modules into electrical power. The expanded NASA ASC effort included development of several generations of ASC prototypes or engineering units to help prepare the ASC technology and Sunpower for flight implementation. Sunpower later had two parallel contracts allowing the last of the NASA engineering units called ASC-E3 to serve as pathfinders for the ASC-F flight convertors being built for DOE. The ASC-E3 convertors utilized the ASC-F flight specifications and were built using the ASC-F design and process documentation. Shortly after the first ASC-F pair achieved initial operation, due to budget constraints, the DOE ASRG flight development contract was terminated. NASA continues to invest in the development of Stirling RPS technology including continued production of the ASC-E3 convertors, seven of which have been delivered with one additional unit in production. Starting in fiscal year 2015, Stirling Convertor Technology Maturation has been reorganized as an element of the RPS Stirling Cycle Technology Development (SCTD) Project and long-term plans for continued Stirling technology advancement are in reformulation. This paper provides a status on the ASC project, an overview of advancements made in the design and production of the ASC at Sunpower, and a summary of acceptance tests, reliability tests, and tactical tests at NASA Glenn that demonstrate the capabilities of the ASC.

Stirling cycle↗
NASA NTRS1979

Supersonic propulsion technology

Propulsion concepts for commercial supersonic transports are discussed. It is concluded that variable cycle engines, together with advanced supersonic inlets and low noise coannular nozzles, provide good operating performance for both supersonic and subsonic flight. In addition, they are reasonably quiet during takeoff and landing and have acceptable exhaust emissions.

Powers, A. G.↗
NASA NTRS2001

User Acceptability of Physiological and Other Measures of Hazardous States of Awareness

Two studies explored user acceptance of devices that measure hazardous states of awareness. In the first study, critical incident data were collected in two workshops from 11 operators working as air traffic controllers or commercial pilots. These critical incident data were used to develop a survey of the acceptability of awareness measures. In the second study, the survey was administered to 100 people also working as air traffic controllers or commercial pilots. Results show that operators are open to the inclusion of technology to measure HSAs even if that technology is somewhat invasive as long as feedback about the HSAs is considered to be useful and helpful. Nonetheless, a major concern is the legal complications associated with being recorded, particularly for older and more experienced operators. Air traffic controllers emphasized the importance of sharing technology information with supervisors in order to receive backup or assistance under conditions of task overload, whereas pilots emphasized the influence of work schedules on problems with awareness. Recommendations are offered concerning the implementation of devices to measure hazardous states of awareness.

Dickinson, Terry L.↗
NASA NTRS2003

Ultra-High Bypass Engine Aeroacoustic Study

A system study was carried out to identify potential advanced aircraft engine concepts and cycles which could be capable of achieving a 5 to 10 EPNdB reduction in community noise level relative to current FAR36 Stage 3 limits for a typical large-capacity commercial transport aircraft. The study was directed toward large twin-engine aircraft applications in the 400,000 to 500,000 pound take-off gross weight class. Four single rotation fan engine designs with fan pressure ratios from 1.3 to 1.75, and two counter-rotating fan engine configurations were studied. Several engine configurations were identified which, with further technology development, could achieve the objective of 5 to 10 EPNdB noise reduction. Optimum design fan pressure ratio is concluded to be in the range of 1.4 to 1.55 for best noise reduction with acceptable weight and Direct Operating Cost (DOC) penalties.

Gliebe, Philip R.↗