Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface spectroscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Experimental electronic structure of the electrically switchable antiferromagnet CuMnAs

Tetragonal CuMnAs is a room temperature antiferromagnet with an electrically reorientable Néel vector and a Dirac semimetal candidate. Direct measurements of the electronic structure of single-crystalline thin films of tetragonal CuMnAs using angle-resolved photoemission spectroscopy (ARPES) are reported, including Fermi surfaces (FS) and energy-wavevector dispersions. After correcting for a chemical potential shift of ≈ – 390 meV (hole doping), there is excellent agreement of FS, orbital character of bands, and Fermi velocities between the experiment and density functional theory calculations. In addition, 2×1 surface reconstructions are found in the low energy electron diffraction (LEED) and ARPES. This work underscores the need to control the chemical potential in tetragonal CuMnAs to enable the exploration and exploitation of the Dirac fermions with tunable masses, which are predicted to be above the chemical potential in the present samples.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Decoding the 2D IR spectrum of the aqueous proton with high-level VSCF/VCI calculations

The aqueous proton is a common and long-studied species in chemistry, yet there is currently intense interest devoted to understanding its hydration structure and transport dynamics. Typically described in terms of two limiting structures observed in gas-phase clusters, the Zundel H 5 O 2 + and Eigen H 9 O 4 + ions, the aqueous structure is less clear due to the heterogeneity of hydrogen bonding environments and room-temperature structural fluctuations in water. The linear infrared (IR) spectrum, which reports on structural configurations, is challenging to interpret because it appears as a continuum of absorption, and the underlying vibrational modes are strongly anharmonically coupled to each other. Recent two-dimensional IR (2D IR) experiments presented strong evidence for asymmetric Zundel-like motifs in solution, but true structure–spectrum correlations are missing and complicated by the anharmonicity of the system. In this study, we employ high-level vibrational self-consistent field/virtual state configuration interaction calculations to demonstrate that the 2D IR spectrum reports on a broad distribution of geometric configurations of the aqueous proton. We find that the diagonal 2D IR spectrum around 1200 cm –1 is dominated by the proton stretch vibrations of Zundel-like and intermediate geometries, broadened by the heterogeneity of aqueous configurations. There is a wide distribution of multidimensional potential shapes for the proton stretching vibration with varying degrees of potential asymmetry and confinement. In conclusion, we find specific cross peak patterns due to aqueous Zundel-like species. These studies provide clarity on highly debated spectral assignments and stringent spectroscopic benchmarks for future simulations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Isoenergetic two-photon excitation enhances solvent-to-solute excited-state proton transfer

Two-photon excitation (TPE) is an attractive means for controlling chemistry in both space and time. Since isoenergetic one- and twophoton excitations (OPE and TPE) in non-centrosymmetric molecules are allowed to reach the same excited state, it is usually assumed that they produce similar excited-state reactivity. We compare the solvent-to-solute excited-state proton transfer of the super photobase FR0-SB following isoenergetic OPE and TPE. We find up to 62% increased reactivity following TPE compared to OPE. From steady-state spectroscopy, we rule out the involvement of different excited states and find that OPE and TPE spectra are identical in non-polar solvents but not in polar ones. We propose that differences in the matrix elements that contribute to the two-photon absorption cross sections lead to the observed enhanced isoenergetic reactivity, consistent with the predictions of our high-level coupledcluster-based computational protocol. We find that polar solvent configurations favor greater dipole moment change between ground and excited states, which enters the probability for TPE as the absolute value squared. This, in turn, causes a difference in the Franck– Condon region reached via TPE compared to OPE. We conclude that a new method has been found for controlling chemical reactivity via the matrix elements that affect two-photon cross sections, which may be of great utility for spatial and temporal precision chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Electronic origin of half-metal to semiconductor transition and colossal magnetoresistance in spinel HgCr 2 Se 4

Half metals are ferromagnets hosting spin-polarized conducting carriers and are crucial for spintronics applications. The chromium spinel HgCr 2 Se 4 represents a unique type of half-metal, which features a half-metal to semiconductor transition (HMST) and exhibits colossal magnetoresistance (CMR) across the ferromagnetic-paramagnetic (FM-PM) transition. Here, using angle-resolved photoemission spectroscopy, we find that the Fermi surface of n-type HgCr 2 Se 4 (n–HgCr 2 Se 4 ) consists of a single electron pocket which moves above the Fermi level (E F ) upon the FM-PM transition, leading to the HMST. Such a Lifshitz transition manifests a giant band splitting which originates from the exchange interaction unveiled with a specific chemical nonstoichiometry. The exchange band splitting and the chemical nonstoichiometry are two key ingredients to the HMST and CMR, consistent with our ab initio calculation. Our findings provide spectroscopic evidence of the electronic origin of the anomalous properties of HgCr 2 Se 4 , which address the unique phase transition in half-metals.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Synthesis and electronic characterization of Nd2−xSrxNiO4 thin films (0≤x≤1.4)

Layered nickelates have been studied extensively over the last three decades due to their structural similarities to the high-Tc superconducting cuprates. Using reactive oxide molecular beam epitaxy (MBE), we synthesize Nd2−xSrxNiO4 thin films for x=0−1.4 to probe the properties and electronic structure as a function of hole doping. The samples with lower doping show semiconducting behavior across the temperatures probed with an onset of metallic conductivity at x=1.4. We also present polarization-dependent O K and Ni L2,3 x-ray absorption spectra to track the evolution of the oxygen-nickel hybridization, distribution of holes between O 2p and Ni 3d states and the nickel oxidation state across the series. Angle-resolved photoemission spectroscopy (ARPES) measurements reveal a Fermi surface that comprises a cupratelike hole pocket of dx2−y2 character with an additional electron pocket of d3z2−r2 character at Γ. The emergence of a quasiparticle peak at the Fermi vector for x=1.4 corroborates the insulator-to-metal transition at x∼1. Finally, observe a fully two-dimensional Fermi surface with no momentum-dependent pseudogap, in contrast to measurements of the related bulk compound, Eu0.9Sr1.1NiO4.

Taylor, Nicole K↗
DOE OSTI2024

Spontaneous Chirality Flipping in an Orthogonal Spin-Charge Ordered Topological Magnet

The asymmetric distribution of chiral objects with opposite chirality is of great fundamental interest ranging from molecular biology to particle physics. In quantum materials, chiral states can build on inversion-symmetry-breaking lattice structures or emerge from spontaneous magnetic ordering induced by competing interactions. Although the handedness of a chiral state can be changed through external fields, a spontaneous chirality flipping has yet to be discovered. We present experimental evidence of chirality flipping via changing temperature in a topological magnet EuAl 4 , which features orthogonal spin density waves (SDW) and charge density waves (CDW). Using circular dichroism of Bragg peaks in the resonant magnetic x-ray scattering, we find that the chirality of the helical SDW flips through a first-order phase transition with modified SDW wavelength. Intriguingly, we observe that the CDW couples strongly with the SDW and displays a rare commensurate-to-incommensurate transition at the chirality flipping temperature. Combining with first-principles calculations and angle-resolved photoemission spectroscopy, our results support a Fermi surface origin of the helical SDW with intertwined spin, charge, and lattice degrees of freedom in EuAl 4 . Our results reveal an unprecedented spontaneous chirality flipping and lay the groundwork for a new functional manipulation of chirality through momentum-dependent spin-charge-lattice interactions. Published by the American Physical Society 2024

3-dimensional systems↗
DOE OSTI2021

Silicate minerals as a direct source of limiting nutrients: Siderophore synthesis and uptake promote ferric iron bioavailability from olivine and microbial growth

Iron is a micronutrient critical to fundamental biological processes including respiration and photosynthesis, and it can therefore impact primary and heterotrophic productivity. Yet in oxic environments, iron is highly insoluble, rendering it, in principle, unavailable as a nutrient for biological growth. Life has “solved” this problem via the invention of iron chelates, known as siderophores, that keep iron available for microbial productivity. In this work, we examined the impact of siderophore synthesis on the speciation, mobility, and bioavailability of iron from rock-forming silicate minerals—shedding new light on the mechanisms by which microbes use mineral substrates to support primary productivity, as well as the consequent effects on silicate dissolution. Growth experiments were performed with Shewanella oneidensis MR-1 in an oxic, iron-depleted minimal medium, amended with olivine minerals as the sole source of iron. Experiments included the wild-type strain MR-1, and a siderophore synthesis gene deletion mutant strain (ΔMR-1). Relative to MR-1, ΔMR-1 exhibited a very pronounced growth penalty and an extended lag phase. However, substantial growth of ΔMR-1, comparable to MR-1 growth, was observed when the mutant strain was provided with siderophores in the form of either filtrate from a well-grown MR-1 culture, or commercially available deferoxamine. These observations suggest that siderophores are critical for S. oneidensis to acquire iron from olivine. Growth-limiting concentrations of deferoxamine amendments were observed to be ≤5–10 µM, concentrations significantly lower than previously recorded as necessary to impact mineral dissolution rates. X-ray photoelectric spectroscopy analyses of the incubated olivine surfaces suggest that siderophores deplete mineral surface layers of ferric iron. Combined, these results demonstrate that low micromolar concentrations of siderophores can effectively mobilize iron bound within silicate minerals, supporting very significant biological growth in limiting environments. The specific mechanism would involve siderophores removing a protective layer of nanometer-thick iron oxides, enhancing silicate dissolution and nutrient bioavailability.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Simplified Ab Initio Molecular Dynamics-Based Raman Spectral Simulations

We describe a simplified approach to simulating Raman spectra from ab initio molecular dynamics (AIMD) calculations. The protocol relies on on-the-fly calculations of approximate molecular polarizabilities using the well-known sum over orbitals (as opposed to states) method. This approach bypasses the more accurate but computationally expensive approach to calculating molecular polarizabilities along AIMD trajectories, i.e., solving the coupled perturbed Hartree–Fock/Kohn–Sham equations. We demonstrate the advantages and limitations of our method through a few case studies targeting molecular systems of interest to surface- and/or tip-enhanced Raman spectroscopy practitioners.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Silicate coprecipitation reduces green rust crystal size and limits dissolution-precipitation during air oxidation

Green rusts (GR) are mixed-valence iron (Fe) hydroxides which form in reducing redox environments like riparian and wetland soils and shallow groundwater. In these environments, silicon (Si) can influence Fe oxides’ chemical and physical properties but its role in GR formation and subsequent oxidative transformation have not been studied starting at initial nucleation. Green rust sulfate [GR(SO 4 )] and green rust carbonate [GR(CO 3 )] were both coprecipitated from salts by base titration in increasing % mol Si (0, 1, 10, and 50). The minerals were characterized before and after rapid (24 h) aqueous air-oxidation by x-ray diffraction (XRD), scanning electron microscopy (SEM), Fe extended x-ray absorption fine structure spectroscopy (EXAFS), and N 2 -BET surface area. Results showed that only GR(SO4) or GR(CO3) was formed at every tested Si concentration. Increasing % mol Si caused decreased plate size and increased surface area in GR(CO3) but not GR(SO4). GR plate basal thickness was not changed at any condition indicating a lack of Si interlayering. Air oxidation of GR(SO4) at all % mol Si contents transformed by dissolution and reprecipitation into lepidocrocite and goethite, favoring ferrihydrite with higher % Si content. Air oxidation of GR(CO3) transformed into magnetite and goethite but increasing Si caused GR to oxidize while retaining its hexagonal plate structure via solid-state oxidation. Our results indicate that Si has the potential to cause GR to form in smaller particles and upon air oxidation, Si can either stabilize the plate structure or alter transformation to ferrihydrite.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Fundamental Studies of Soiling and Cementation of PV Cover Glass Materials: Addressing Reliability with Advanced X-ray Scattering/Spectroscopy and First Principles Modeling (Final Technical Report)

Accumulation of soils and other particulate matter on the front cover glass of solar photovoltaic (PV) modules results in transmission losses that detrimentally affect the power output of PV installations. The conventional solution to this problem is manual abrasive scrubbing of modules, which entails significant water usage and manpower. To further combat this issue, there is a concerted effort within the PV industry to develop anti-soiling (AS) coatings to mitigate power losses due to soiling of PV modules, which can exceed 35% in some cases. However, relatively little is known about the fundamental physical and chemical mechanisms that enable anti-soiling behavior. In this project, a combination of advanced X-ray analysis tools and first principles computational modeling has employed to understand the physical and chemical interactions between environmental soils and PV cover glass materials. The specific objectives were: 1) investigate soiling interactions and cementation behavior of relevant PV materials, including bare glass, conventional antireflective (AR) coatings, and a commercial AS coating, using a library of representative particulate soils, and 2) utilize first principles computational spectroscopy modeling to interpret the experimental X-ray spectroscopy measurements and determine the detailed surface chemistry changes that occur on these surfaces in the presence of soiling and cementation.

14 SOLAR ENERGY↗
DOE OSTI2020

High-Temperature Nucleation of GaP on V-Grooved Si

The use of nanopatterned {111}-faceted v-grooves has recently shown promise for growing high-quality III–V material on Si. Here, we study the effect of reactor conditions and surface pretreatments on the nucleation of GaP on v-grooved Si in a high-temperature regime, which offers the promise of a defect-free GaP/Si interface favorable for Si passivation and dislocation glide in the GaP. X-ray photoelectron spectroscopy was used to understand the Si surface chemistry prior to nucleation, and transmission electron microscopy was used to probe material quality of the nuclei. Temperature and V/III ratio were found to control the facet selectivity of nucleation. We demonstrate a condition of high temperature and high V–III ratio that leads to uniform nucleation at the bottom of the trenches, with initial material free of nucleation-related interfacial defects. This optimized condition was then shown to coalesce into a thin film after additional growth.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Screening of Polar Electron-Phonon Interactions near the Surface of the Rashba Semiconductor BiTeCl

Understanding electron-phonon coupling in noncentrosymmetric materials is critical for controlling the internal fields which give rise to Rashba interactions. We apply time- and angle-resolved photoemission spectroscopy (trARPES) to study coherent phonons in the surface and bulk regions of the polar semiconductor BiTeCl. Aided by \textit{ab initio} calculations, our measurements reveal the coupling of out-of-plane $A_1$ modes and an in-plane $E_2$ mode. By considering how these modes modulate the electric dipole moment in each unit cell, we show that the polar $A_1$ modes are more effectively screened in the metallic surface region, while the non-polar $E_2$ mode couples in both regions. Finally, in addition to informing strategies to optically manipulate Rashba interactions, this work has broader implications for the behavior of electron-phonon coupling in systems characterized by inhomogeneous dielectric environments.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Electrochemically active surface area controls HER activity for Fe x Ni 100–x films in alkaline electrolyte

We report the synthesis and electrocatalytic activity of Fe x Ni 100-x electrochemically deposited films were investigated. Films were evaluated for the hydrogen evolution reaction (HER) in alkaline media with respect to composition and electrochemically active surface area (ECSA). Results demonstrate that films of higher or equal Fe content had an ECSA tenfold greater than films with higher Ni. When normalized by geometric surface area, Fe 50 Ni 50 films required the lowest overpotential of -390 mV to reach a current density of -10 mA cm -2 . However, when normalized by the ECSA, intrinsic HER activity increases as Ni content increases. Tafel slope, ECSA, microscopy, and impedance spectroscopy analyses allow a decoupled analysis of surface area versus activity effects on overall measured HER activity. Furthermore, these analyses collectively demonstrate that the increase in electrocatalytic activity is attributed to the increase in ECSA and not to an enhancement in the intrinsic activity by Fe and Ni component interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Nickel Enhances InPd-Catalyzed Nitrate Reduction Activity and N 2 Selectivity

Palladium–indium (PdIn) is a well-established bimetallic composition for reductively degrading nitrate anions, one of the most ubiquitous contaminants in the groundwater. However, the scarcity and the variable price of these rare-earth and platinum group critical metals may hinder their use for water treatment. Nickel (Ni), a nonprecious metal in the same element group as Pd, could partially replace and lower Pd usage if the resulting trimetallic composition is sufficiently catalytically active. Herein, we report the synthesis and nitrate reduction catalysis of activated carbon-supported “In-on-Pd-on-Ni” catalysts (InPdNi/AC). While bimetallic InPd/AC (0.05 wt % In, 1.3 wt % Pd) was expectedly active, trimetallic InPdNi/AC containing the same In amount, much less Pd (0.1 wt %), and 1 wt % Ni was >17 more active (k cat ≈ 20 vs 349 L min –1 g surface metal –1 ). X-ray photoelectron spectroscopy (XPS) and density functional theory (DFT) calculations showed that Pd gained electron density from Ni, correlating to the increased nitrate reduction activity. Ammonium byproduct selectivity for InPdNi/AC (18% at 50% nitrate conversion) was lower compared to that of InPd/AC (48%), suggestive of the higher surface coverage of NO or its greater reactivity with NO 2 – , which led to more N 2 . Accounting for the catalyst precursor, manufacturing costs, and spent metal recovery, we calculated that Ni incorporation lowered the net catalyst cost significantly (from $\$$1028/kg to $\$$170/kg). The trimetallic composition lowered, by ∼26 times, the catalyst cost of a stirred tank reactor sized to the same treatment capacity as that for the bimetallic case. In conclusion, the results demonstrate that the partial replacement of the precious metal with an earth-abundant one leads to a higher efficiency and lower cost denitrification catalyst, via a material strategy that should be beneficial for other clean-water catalytic systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Spectroscopic investigation of early light emission from anode-initiated surface flashover in vacuum

Time-resolved optical emission spectroscopy is used to explore the early development of anode-initiated flashover in vacuum. An experimental apparatus for collecting flashover self-luminosity is introduced, which enables spatially resolved light collection from regions adjacent to the anode and cathode triple junctions. The emitted light is spectrally and temporally resolved utilizing an imaging spectrograph and a fast electronic shutter camera. The first light detectable from flashovers across both Rexolite and polytetrafluoroethylene (PTFE) insulators begins less than 10 ns prior to the flashover gap's impedance collapse and consists of faint broadband feature in primarily visible wavelengths. This suggests luminosity due to excitation in the solid, possibly occurring as a result of field emitted electrons. In the few nanoseconds leading up to and including the impedance collapse, the broadband spectrum grows in intensity and extends into the UV, eventually accompanied by a few emission lines of the insulator material. This is strong evidence that the early stages of anode-initiated flashover include surface layer breakdown of the insulator, as a contrast from cathode-initiated flashover, which is predominately an above-surface process. Spectra accumulated over longer exposures of PTFE flashovers indicate that, in the first few hundred nanoseconds after the impedance collapse, ions from the insulator material constitute the majority of the emission lines. Later, neutral and ionic metal species from the electrode contribute with similar prominence as well as molecular bands from diatomic carbon. Finally, a comparison is provided of the results of these studies to other spectroscopic investigations of vacuum flashover from the literature.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Sodium tracer measurements of an expanded dense aluminum plasma from e-beam isochoric heating

Spatially and temporally resolved visible absorption spectroscopy is performed on sodium D-lines present as surface contaminants on an expanded dense aluminum plasma plume. An 80-ns FWHM, intense, relativistic electron beam deposits 5.4 J into a 100- μ m-thick Al foil, which isochorically heats and subsequently hydrodynamically expands the material through the warm dense matter state and into a classical-like plasma state, with a coupling parameter of approximately 0.2 and a degeneracy parameter of approximately 270. The Na contamination, carried along with the expanding plume, shows saturated absorption features in the dense Al continuum for λ > 450 nm. X-ray photoelectron spectroscopy and laser-induced breakdown spectroscopy confirm Na is a surface contaminant with an atomic concentration of ~ 0.1 % when interrogating identical foil samples. Additioanlly, a spectroscopic-quality radiation transport model is used to post-process 2D hydrodynamic simulations to interpret the plasma conditions based on the measured Na 3p-3s doublet line profiles. A sodium number density of 3 × 10 15 cm -3 best matches the experimental spectra, which originate from a dense surface plasma with n e = 3.0 ± 0.8 × 10 18 cm -3 .

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Surface Functionalization of Black Phosphorus with Nitrenes: Identification of P=N Bonds Using Isotopic Labeling

Abstract: Surface functionalization of two-dimensional crystals is a key path to tuning their intrinsic physical and chemical properties. However, synthetic protocols and experimental strategies to directly probe chemical bonding in modified surfaces are scarce. Introduced here is a mild, surface-specific protocol for the surface functionalization of few-layer black phosphorus nanosheets using a family of photolytically generated nitrenes (RN) from the corresponding azides. By embedding spectroscopic tags in the organic backbone, a multitude of characterization techniques are employed to investigate in detail the chemical structure of the modified nanosheets, including vibrational (infrared, Raman), Xray (emission, photoelectron), CPMAS NMR, and UV-vis spectroscopy. To directly probe the functional groups introduced on the surface, R fragments were selected such that in conjunction with vibrational spectroscopy, 15N-labeling experiments, and DFT methods, diagnostic P=N vibrational modes indicative of iminophosphorane units on the nanosheet surface could be conclusively identified.

Walz, Kendall↗
DOE OSTI2021

Artificial Linear Brush Abrasion of Coatings for Photovoltaic Module First Surfaces

Natural soiling and the subsequent requisite cleaning of photovoltaic (PV) modules result in abrasion damage to the cover glass. The durability of the front glass has important economic consequences, including determining the use of anti-reflective and/or anti-soiling coatings as well as the method and frequency of operational maintenance (cleaning). Artificial linear brush abrasion using Nylon 6/12 bristles was therefore examined to explore the durability of representative PV first-surfaces, i.e., the surface of a module incident to direct solar radiation. Specimens examined include silane surface functionalized-, roughened (etched)-, porous silica-coated-, fluoropolymer-coated-, and ceramic (TiO2 or ZrO2/SiO2/ZrO2/SiO2)-coated-glass, which are compared to monolithic-poly(methyl methacrylate) and -glass coupons. Characterization methods used in this study include: optical microscopy, ultraviolet-visible-near-infrared (UV-VIS-NIR) spectroscopy, sessile drop goniometry, white-light interferometry, atomic force microscopy (AFM), and depth-profiling X-ray photoelectron spectroscopy (XPS). The corresponding characteristics examined include: surface morphology, transmittance (i.e., optical performance), surface energy (water contact angle), surface roughness, scratch width and depth, and chemical composition, respectively. The study here was performed to determine coating failure modes; identify characterization methods that can detect nascent failures; compare the durability of popular contemporary coating materials; identify their corresponding damage characteristics; and compare slurry and dry-dust abrasion. This study will also aid in developing an abrasion standard for the PV industry.

41 EE - Solar Energy Technologies Office (EE-4S)↗