Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface spectroscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Efficient electrocatalytic conversion of CO 2 to ethanol enabled by imidazolium-functionalized ionomer confined molybdenum phosphide

An effective electrochemical carbon dioxide reduction reaction (eCO 2 RR) requires the discovery of a catalytic system that is highly active and selective for multi-carbon products together with superior CO 2 diffusion at a catalyst layer to minimize the reduction barriers. Here, we found a catalytic system that uses molybdenum phosphide (MoP) nanoparticles covered by imidazolium-functionalized ionomer (Im) that promotes CO 2 diffusion at the catalyst layer toward the catalyst surface, where CO 2 is reduced to ethanol (C 2 H 5 OH). The electrochemical results with the MoP-Im co-catalyst show a C 2 H 5 OH production Faradaic efficiency and a cathodic energy efficiency of 77.4% and 63.3%, respectively, at a potential as low as - 200 mV vs. RHE. The electrochemical experiments along with our physicochemical characterizations indicate that the Im improves CO 2 diffusion and balances water content resulting in a higher CO 2 -to-water ratio at the catalyst layer and fine-tunes the electronic properties of Mo atoms at the MoP surface. Finally, in-situ Raman spectroscopy reveals that a high number of adsorbed *CO intermediates on the surface and a higher binding strength of *CO intermediates on the Mo surface sites in the presence of imidazolium molecules are the main reasons for a superior C-C coupling and thereby the improved C 2 H 5 OH formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Cooperative Effects Associated with High Electrolyte Concentrations in Driving the Conversion of CO2 to C2H4 on Copper

Compared to a conventional electrolyte concentration of 1 M HCOOK, the use of a highly concentrated 7.1 M HCOOK electrolyte increases the Faradaic efficiency (FE) ratio of C2H4/CO from 2.2 +- 0.3 to 18.3 +- 4.8 at -1.08 V vs. reversible hydrogen electrode (RHE) on a Cu gas-diffusion electrode. Based on electrochemical analysis and ab initio molecular dynamics (AIMD) simulation, the identity and concentration of the cation and anion play more important roles in controlling the CO2R reaction pathway than the bulk CO2 solubility and the bulk pH of electrolytes. In situ attenuated reflectance surface enhanced infrared absorption spectroscopy (ATR-SEIRAS) suggests that, unlike 1 M HCOOK, the *CO-bridge-binding mode on Cu is dominant in 7.1 M HCOOK electrolyte, which potentially results in less CO release and higher yield of C2H4. This study demonstrates that although we can tailor the electrolyte composition to shift product selectivity, the factors that control the product selectivity are numerous and cannot be distilled down into one correlated property-reactivity relationship.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Electronic structure of reduced CeO 2 (111) surfaces interacting with hydrogen as revealed through electron energy loss spectroscopy in comparison with theoretical investigations

Based on both, ab-initio cluster calculations as well as periodic density functional based loss function calculations, we have assigned the origins of the valence electron excitation regime in electron energy loss spectra of well-ordered ceria films in (111) orientation at various states of reduction as well as after exposing the reduced films to hydrogen from the gas phase (Li et al, Angew. Chem. Int. Ed., 58 (2019) 14686–14693). The explicit calculation of intensity distributions using the dipole approximation allow us to draw conclusions about the nature of oxygen vacancies, which occur upon reduction and how those interact with hydrogen to form hydride species. Herein, we also reports a brief discussion of vibrational excitations of hydrogen loaded ceria and corroborates previous interpretations, based on inelastic neutron scattering.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Modular multi-interface nanocrystals for enhanced ethanol oxidation electrocatalysis

Electrochemical processes that utilize biomass-derived ethanol as a source of electrons and protons offer a sustainable energy strategy, yet their practical implementation is limited by sluggish ethanol oxidation reaction (EOR) kinetics and catalyst poisoning. Here, in this study, we report a modular multi-interface nanocrystal catalyst comprising core/shell Co 2 P/Pd and Pd-Au heterostructured interfaces that exhibit complementary functions for the enhanced EOR catalysis. The Co 2 P/Pd interface boosts Pd atom utilization and lowers the kinetic barriers for ethanol-to-acetate conversion, while the Pd-Au interface effectively alleviates CO poisoning caused by C–C bond cleavage of ethanol. In-depth analyses using in situ attenuated total reflectance-surface-enhanced infrared absorption spectroscopy, differential electrochemical mass spectrometry, and density functional theory calculations elucidate the mechanistic roles of these interfaces. The optimized Co 2 P/Pd-Au 0.08 nanorods achieve an excellent mass activity, underscoring the potential of modular, multi-interface nanocrystals for advancing EOR catalysis and offering a generalizable strategy for broader catalytic innovations.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2021

Microstructural Effects of High Dose Helium Implantation in ErD 2

Metal hydrides can store hydrogen isotopes with high volumetric density. In metal tritides, tritium beta decay can result in accumulation of helium within the solid, in some cases exceeding 10 at.% helium after only 4 years of aging. Helium is insoluble in most materials, but often does not readily escape, and instead coalesces to form nanoscale bubbles when helium concentrations are near 1 at.%. Blistering or spallation often occurs at higher concentrations. Radioactive particles shed during this process present a potential safety hazard. This study investigates the effects of high helium concentrations on erbium deuteride (ErD 2 ), a non-radioactive surrogate material for erbium tritide (ErT 2 ). To simulate tritium decay in the surrogate, high doses of 120 keV helium ions were implanted into ErD 2 films at room temperature. Scanning and transmission electron microscopy indicated spherical helium bubble formation at a critical concentration of 1.5 at.% and bubble linkage leading to nanoscale crack formation at a concentration of 7.5 at.%. Additionally, crack propagation occurred through the nanocrack region, resulting in spallation extending from the implantation peak to the surface. Electron energy loss spectroscopy was utilized to confirm the presence of high-pressure helium in the nanocracks, suggesting that helium gas plays a predominant role in deformation. This work improves the overall understanding of helium behavior in ErD 2 by using modern characterization techniques to determine: the critical helium concentration required for bubble formation, the material failure mechanism at high concentration, and the nanoscale mechanisms responsible for material failure in helium implanted ErD 2 .

36 MATERIALS SCIENCE↗
DOE OSTI2025

Transient Studies of CO 2 Adsorption over CeO 2 Nanostructures with In Situ DRIFTS and Modulation Excitation

Experiments of in-situ DRIFTS combined with modulation excitation (ME) spectroscopy showed a rich surface chemistry associated with the adsorption of CO 2 on nanocubes and nanospheres of ceria. The nanocubes exposed faces with a (100) orientation, with the edges and corners displaying (110) and (111) orientations, respectively. Here, the nanospheres mainly contained ceria (111) and (110) planes. DFT calculations showed that CO 2 is a multidentate adsorbate on ceria that can undergo changes in its bonding configuration depending on the chemical environment. At 250 °C, a temperature typically used for the conversion of CO 2 into oxygenates, alkanes and olefins, CO 2 reacted with O centers or OH groups present on the nanocubes and nanospheres to yield bi- and tri-dentate carbonates, hydroxycarbonates, and formates. Both nanostructures were highly reactive and a dynamic equilibrium was established: carbonate species were rapidly generated upon the injection of CO 2 and they decomposed upon the removal of CO 2 from the gas phase. In the case of the ceria nanocubes, the adsorption/desorption processes were essentially reversible, opening the door to catalytic transformations. A larger concentration of defects in the ceria nanospheres led to strongly bound carbonates and formates that may be spectators, site blockers, or surface modifiers in catalytic processes. In the ME studies, additional intermediates were detected, and it was clear that the response of surface species to the presence/absence of CO 2 was highly dependent on the morphology of the ceria nanostructures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Investigating the Adsorption–Desorption Kinetics of a Molecular Water Oxidation Catalyst at an Electrode Interface

Probing the dynamics of molecular catalysts at electrode–electrolyte interfaces is essential for understanding catalytic mechanisms. Structure-specific spectroscopic methods are particularly powerful for examining electrocatalytic interfaces but are mostly used under steady-state conditions. Herein, we combined surface-enhanced infrared absorption spectroscopy (SEIRAS) with phase-sensitive detection (PSD) to investigate the dynamics of a molecular Ir-based water oxidation catalyst at the Au–electrolyte interface. We found that the amplitude of the absorbance of the catalyst is anticorrelated to that of interfacial water. This anticorrelation can be understood by the adsorption of the electrooxidized catalyst on the electrode and concurrent displacement of interfacial water. The infrared signals from the interface exhibit an increasing phase lag with respect to the electrode potential with an increasing scan rate of the potential. Kinetic modeling suggests that the potential-dependent adsorption–desorption kinetics of the molecular catalyst on the electrode gives rise to this phase lag. Furthermore, this study shows that PSD-SEIRAS is a powerful tool for investigating the interfacial dynamics of electrocatalytic systems.

Catalysts↗
DOE OSTI2024

Layer Resolved Cr Oxidation State Modulation in Epitaxial SrFe 0.67 Cr 0.33 O 3−δ Thin Films

Understanding how doping influences physicochemical properties of ABO 3 perovskite oxides is critical for tailoring their functionalities. In this study, SrFe 0.67 Cr 0.33 O 3−δ epitaxial thin films were used to examine the effects of Fe and Cr competition on structure and B-site cation oxidation states. The films exhibit a perovskite-like structure near the film/substrate interface, while a brownmillerite-like structure with horizontal oxygen vacancy channels predominates near the surface. Electron energy loss spectroscopy shows Fe remains Fe 3+ , while Cr varies from ∼Cr 3+ (tetrahedral layers) to ∼Cr 4+ (octahedral layers) within brownmillerite phases and becomes ∼Cr 4.5+ in perovskite-like phases. Theoretical simulations indicate that Cr–O bond arrangements and the way oxygen vacancies interact with Cr and Fe drive Cr charge disproportionation. High-valent Cr cations introduce additional densities of states near the Fermi level, reducing the optical bandgap from ∼2.0 eV (SrFeO 2.5 ) to ∼1.7 eV (SrFe 0.67 Cr 0.33 O 3−δ ). In conclusion, these findings offer insights into B-site cation doping in the perovskite oxide framework.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Pulsed-Potential Electrolysis Enhances Electrochemical C–N Coupling by Reorienting Interfacial Ions

The electrochemical processing of anthropogenic CO 2 is an emerging technology aimed at utilizing renewable energies to synthesize valuable chemicals. Recently, developments in broadening the scope of the CO 2 reduction reaction (CO 2 RR) by enabling heteroatom coupling have surged with a focus on C–N bond formation. Herein, we investigate the factors that govern the selectivity and activity in synthesizing urea from environmentally malignant chemical feedstocks (CO 2 and NO 3 – ). Through a combination of electrolyte optimization and pulsed potential electrolysis, electrochemical urea production was optimized to a Faradaic efficiency of 60.4% with current densities reaching as high as 310 μA cm –2 . This work was further supported by in situ surface enhanced infrared absorbance spectroscopy that reveals the formation of C–N-related species at low overpotentials. Density functional theory calculations revealed that the reaction progresses between early reduction intermediates for the CO 2 RR and NO 3 RR and offered insights into the impacts of pulsed-potential on substrate transport.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Infrared Spectroscopic Observation of Oxo- and Superoxo-Intermediates in the Water Oxidation Cycle of a Molecular Ir Catalyst

Molecular Ir catalysts have emerged as an important class of model catalysts for understanding structure–activity relationships in water oxidation, a reaction that is central to renewable fuel synthesis. Prior efforts have mostly focused on controlling and elucidating the emergence of active species from prepared precursors. However, the development of efficient and stable molecular Ir catalysts also necessitates probing of reaction intermediates. To date, relatively little is known about the key intermediates in the cycles of the molecular Ir catalysts. Herein, we probed the catalytic cycle of a homogeneous Ir catalyst (“blue dimer”) at a Au electrode/aqueous electrolyte interface by combining surface-enhanced infrared absorption spectroscopy (SEIRAS) with phase-sensitive detection (PSD). Cyclic voltammograms (CVs) from 1.4 to 1.7 VRHE (RHE = reversible hydrogen electrode) give rise to a band at ~818 cm –1 , whereas CVs from 1.4 to ≥1.85 VRHE generate an additional band at ~1146 cm –1 . Isotope labeling experiments indicate that the bands at ~818 and ~1146 cm –1 are attributable to oxo (Ir V =O) and superoxo (Ir IV –OO • ) moieties, respectively. Furthermore, this study establishes PSD-SEIRAS as a sensitive tool for probing water oxidation cycles at electrode/electrolyte interfaces and demonstrates that the relative abundance of two key intermediates can be tuned by the thermodynamic driving force of the reaction.

25 ENERGY STORAGE↗
DOE OSTI2024

Oxygen Vacancies Alter Methanol Oxidation Pathways on NiOOH

A thorough comprehension of the mechanism underlying the methanol oxidation reaction (MOR) on Ni-based catalysts is critical for future electrocatalytic design and development. However, the mechanism of MOR on these materials remains a matter of controversy. Herein, we combine in situ surface-enhanced infrared absorption spectroscopy (SEIRAS) and density functional theory (DFT) calculations to identify the active sites and determine the mechanism of MOR on monometallic Ni-based catalysts in alkaline media. The SEIRAS results show that formate and (bi)carbonate are formed after the commencement of the MOR with potential-dependent relative distributions. These spectroscopic results are in good agreement with the DFT-computed reaction profiles over an oxygen vacancy, suggesting that the MOR mainly proceeds through the formate-involving pathway, in which the early consumption of methanol yields formate as the major product, while increasing potential drives further oxidation of formate to (bi)carbonate. We also find a parallel pathway for the generation of (bi)carbonate at high potentials that bypasses the formation of formate. The two main pathways are thermodynamically more feasible than the one predominantly reported in the literature for MOR on NiOOH that involves CHO and/or CO as key intermediates. These DFT results are supported by spectroscopic evidence showing that no band associated with CHO or CO can be detected by SEIRAS, which is attributed to the nature of the oxygen vacancies as the active sites, suppressing deep dehydrogenation of CH 2 O to CHO. Furthermore, this work thus shows the promising role of defect engineering in promoting the electrocatalytic MOR activity and selectivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Catalytic, Spectroscopic, and Theoretical Studies of Fe 4 S 4 -Based Coordination Polymers as Heterogenous Coupled Proton–Electron Transfer Mediators for Electrocatalysis

Iron–sulfur clusters play essential roles in biological systems, and thus synthetic [Fe 4 S 4 ] clusters have been an area of active research. Recent studies have demonstrated that soluble [Fe 4 S 4 ] clusters can serve as net H atom transfer mediators, improving the activity and selectivity of a homogeneous Mn CO 2 reduction catalyst. Here, in this work, we demonstrate that incorporating these [Fe 4 S 4 ] clusters into a coordination polymer enables heterogeneous H atom transfer from an electrode surface to a Mn complex dissolved in solution. A previously reported solution-processable Fe 4 S 4 -based coordination polymer was successfully deposited on the surfaces of different electrodes. The coated electrodes serve as H atom transfer mediators to a soluble Mn CO 2 reduction catalyst displaying good product selectivity for formic acid. Furthermore, these electrodes are recyclable with a minimal decrease in activity after multiple catalytic cycles. The heterogenization of the mediator also enables the characterization of solution-phase and electrode surface species separately. Surface enhanced infrared absorption spectroscopy (SEIRAS) reveals spectroscopic signatures for an in situ generated active Mn–H species, providing a more complete mechanistic picture for this system. The active species, reaction mechanism, and the protonation sites on the [Fe 4 S 4 ] clusters were further confirmed by density functional theory calculations. The observed H atom transfer reactivity of these coordination polymer-coated electrodes motivates additional applications of this composite material in reductive H atom transfer electrocatalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Thermal Regulation of CO 2 Activation Pathways via Interfacial Water Restructuring Enables Ampere-Level, Near-Unity CO Electrosynthesis

Electrochemical reduction of CO 2 to CO is a key step in carbon utilization technologies, yet maintaining high CO selectivity under elevated temperatures relevant to industrial membrane-electrode-assembly (MEA) electrolyzers remains challenging due to the competing hydrogen evolution reaction (HER). Additionally, the temperature dependence of CO selectivity on Cu-based catalysts has remained largely unexplored. Here, we demonstrate that incorporating atomic In or Sn into Cu fundamentally reshapes the selectivity of Cu catalysts at elevated temperatures. Dilute alloy catalysts, In 1 Cu and Sn 1 Cu, achieve >95% FE of CO over a broad current-density window (0.1−1.1 A cm −2 ) at 60 °C in MEA electrolyzers, far exceeding their performance at ambient temperature. In situ attenuated total reflection surface-enhanced infrared absorption spectroscopy suggests that elevating temperature depletes interfacial water activity, which favors a shift in CO 2 activation from a proton-coupled *COOH pathway toward an electron-driven *COO − -associated pathway, while also suppressing HER and CO hydrogenation. In contrast, benchmark CO-selective catalysts such as Ag exhibit minimal temperature-induced changes in CO production at 20−60 °C. These findings identify temperature as an unavoidable yet previously underutilized operating parameter in MEA electrolyzers for high-rate, selective CO production on Cubased catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Infrared spectroscopy data- and physics-driven machine learning for characterizing surface microstructure of complex materials

There is a need to characterize complex materials and their dynamics under reaction conditions to accelerate materials design. Adsorbate vibrational excitations are selective to adsorbate/surface interactions and infrared (IR) spectra associated with activating adsorbate vibrational modes are accurate, capture details of most modes, and can be obtained operando. Current interpretation depends on heuristic peak assignments for simple spectra, precluding the possibility of obtaining detailed structural information. Here, we combine data-based approaches with chemistry-dependent problem formulation to develop physics-driven surrogate models that generate synthetic IR spectra from first-principles calculations. Using synthetic IR spectra of carbon monoxide on platinum, we implement multinomial regression via neural network ensembles to learn probability distributions functions (pdfs) that describe adsorption sites and quantify uncertainty. We use these pdfs to infer detailed surface microstructure from experimental spectra and extend this methodology to other systems as a first step towards characterizing complex interfaces and closing the materials gap.

Science & Technology - Other Topics↗
DOE OSTI2021

Absence of a Dirac gap in ferromagnetic Cr x (Bi 0.1 Sb 0.9 ) 2-x Te 3

Magnetism breaks the time-reversal symmetry expected to open a Dirac gap in 3D topological insulators that consequently leads to the quantum anomalous Hall effect. The most common approach of inducing a ferromagnetic state is by doping magnetic 3d elements into the bulk of 3D topological insulators. In Cr 0.15 (Bi 0.1 Sb 0.9 ) 1.85 Te 3 , the material where the quantum anomalous Hall effect was initially discovered at temperatures much lower than the ferromagnetic transition, T C , the scanning tunneling microscopy studies have reported a large Dirac gap of ~20–100 meV. The discrepancy between the low temperature of quantum anomalous Hall effect (< C ) and large spectroscopic Dirac gaps (>>T C ) found in magnetic topological insulators remains puzzling. Here, we used angle-resolved photoemission spectroscopy to study the surface electronic structure of the pristine and potassium doped surface of Cr 0.15 (Bi 0.1 Sb 0.9 ) 1.85 Te 3 . Upon potassium deposition, the p-type surface state of the pristine sample was turned into an n-type, allowing the spectroscopic observation of Dirac point. Finally, we find a gapless surface state, with no evidence of a large Dirac gap reported in tunneling studies.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Preparation of a membrane-sealed cell for studying catalyst nanoparticles in flowing gas with high vacuum x-ray photoelectron spectrometer

Here a sealing-style x-ray photoelectron spectroscopy study of the surface of a 1.0 wt. %Ni/TiO2 nanoparticle catalyst in a flowing mixture of CO and O2 at 1 bar was performed with a graphene membrane-sealed Si3N4 window-based miniature cell. We report the details on how a commercial Si3N4 window is modified before assembling a graphene membrane, how single-layer graphene membranes are transferred from their metal supports to the modified Si3N4 window, how a modified Si3N4 window covered with a double-layer graphene membrane is assembled onto a blank cell cap, how a nanoparticle catalyst is introduced to the cell cap and then the cell cap is installed onto a cell body to form a complete reaction cell, and how a complete cell is interfaced with a high vacuum chamber of an XPS system before an XPS study of 1.0 wt. %Ni/TiO2 catalyst surface in a flowing mixture for 0.2 bar CO and 0.8 bar O2 is performed. How the characterization of a catalyst using this type of graphene membrane-sealed Si3N4 window-based miniature cell is relevant to the finding of the actual surface chemistry of a catalyst during catalysis is discussed.

Instruments & Instrumentation↗
DOE OSTI2022

Spin-polarized imaging of strongly interacting fermions in the ferrimagnetic state of the Weyl candidate CeBi

CeBi has an intricate magnetic phase diagram whose fully polarized state has recently been suggested as a Weyl semimetal, though the role of f states in promoting strong interactions has remained elusive. Here we focus on the less-studied but also time-reversal symmetry-breaking ferrimagnetic phase of CeBi, where our density functional theory (DFT) calculations predict additional Weyl nodes near the Fermi level E F . We use spin-polarized scanning tunneling microscopy and spectroscopy to image the surface ferrimagnetic order on the itinerant Bi p states, indicating their orbital hybridization with localized Ce f states. We observe suppression of this spin-polarized signature at E F , coincident with a Fano line shape in the conductance spectra, suggesting the Bi p states partially Kondo screen the f magnetic moments, and this p – f hybridization causes strong Fermi-level band renormalization. Furthermore, the p-band flattening is supported by our quasiparticle interference measurements, which also show band splitting in agreement with DFT, painting a consistent picture of a strongly interacting magnetic Weyl semimetal.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Local strain-dependent electronic structure and perpendicular magnetic anisotropy of a MnGaN 2D magnetic monolayer

Local strain-dependent spin-polarized electronic structure of a two-dimensional (2D) magnetic layer is an exciting property for practical applications. For example, it holds the promise for advanced ultrathin spintronic nanodevices with customized electronic and magnetic properties by local strain engineering. Here, we demonstrate that the spin-polarized electronic structure of a 2D manganese gallium nitride (MnGaN-2D) magnetic monolayer is sensitive to intrinsic local lattice strain, as proven by first-principles calculations and indicated by scanning tunneling spectroscopy measurements. Atomic resolution images reveal a highly non-Gaussian lattice spacing/strain distribution, while the spectroscopy reveals variations in the electronic density of states. Simulations of the MnGaN-2D monolayer based on first-principles calculations, including both isotropic and anisotropic strains, confirm a highly strain-dependent manganese partial density of states. Spin-orbit coupling is included which indicates either out-of-plane perpendicular magnetic anisotropy (PMA) or in-plane magnetic anisotropy, dependent on the type of strain whether compressive or tensile, suggesting that MnGaN-2D is magnetoelastic. The MnGaN-2D PMA is further supported by superconducting quantum interference device magnetometry measurements which reveal a high spin polarization of ~ 79 % at room temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗