Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface reactions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Mechanism and kinetics of light alkane dehydrogenation and cracking over isolated Ga species in Ga/H-MFI

The objective of this study is to examine the mechanisms and kinetics of C2H6 dehydrogenation and n-C4H10 dehydrogenation and cracking over isolated Ga species in Ga/HMFI and to compare these results to those reported previously for C3H8 dehydrogenation and cracking. C2H6 dehydrogenation is found to be catalyzed by both [GaH]2+ and [GaH2]+ cations at similar turnover frequencies. Rate measurements over Ga/H-MFI containing predominantly [GaH2]+ cations reveal that C2H6 dehydrogenation rates exhibit a Langmuir.Hinshelwood dependence on C2H6 partial pressure at elevated temperatures (>730 K), consistent with the involvement of chemisorbed [C2H5.GaH]+ species. The reaction kinetics suggest that C2H6 dehydrogenation proceeds via heterolytic C-H cleavage of adsorbed C2H6 by [GaH2]+ cations to form H2 and [C2H5-GaH]+ species, which further decompose via β-hydride elimination to form C2H4. By contrast, C4H10 dehydrogenation and both terminal and central cracking are catalyzed exclusively by [GaH]2+ cations. All three reactions exhibit a Langmuir-Hinshelwood dependence on C4H10 partial pressure and are inhibited by H2. Ratios of dehydrogenation to cracking (total) and terminal to central cracking are approximately independent of C4H10 partial pressure consistent with the involvement of a common C4H10-derived surface intermediate. The observed reaction kinetics are consistent with an alkyl-mediated mechanism occurring over [GaH]2+, analogous to that reported previously for C3H8 dehydrogenation/cracking over Ga/H-MFI (Phadke, N. M.; et al. J. Am. Chem. Soc. 2019, 141, 1614-1627). The mechanism proceeds via facile, heterolytic dissociation of adsorbed C4H10 to form [C4H9-GaH]+-H+ cation pairs via methyl C-H-activated pathways. Dehydrogenation then proceeds via β-hydride elimination, respectively, forming butene, while terminal and central cracking proceed via C-H-activated H+ attack. Methylene activation was also considered but found to occur at a significantly lower rate. Theoretical analysis of the proposed reaction pathways leads to apparent activation enthalpies in good agreement with values extracted from the measured kinetics, thereby supporting the proposed pathways and the roles of [GaH]2+ and [GaH2]+ cations in the dehydrogenation and cracking of light alkanes on Ga/H-MFI.

Phadke, NM↗
DOE OSTI2020

Theoretical study of the reaction mechanism and kinetics of the phenyl + propargyl association

Potential energy surface for the phenyl + propargyl radical recombination reaction has been studied at the CCSD(T)-F12/cc-pVTZ-f12//B3LYP/6-311G** level of theory for the closed-shell singlet species and at the triplet–singlet gap CASPT2/cc-pVTZ-CCSD(T)-F12/cc-pVTZ-f12//CASSCF/cc-pVTZ level of theory for the diradical species. High-pressure limit rate constants for the barrierless channels were evaluated with variable reaction coordinate transition state theory (VRC-TST). Rice–Ramsperger–Kassel–Marcus Master Equation (RRKM-ME) calculations have been performed to assess temperature- and pressure-dependent phenomenological rate constants and product branching ratios. Here, the entrance channels of the radical association reaction produce 3-phenyl-1-propyne and phenylallene which can further dissociate/isomerize into a variety of unimolecular and bimolecular products. Theoretical evidence is presented that, at combustion relevant conditions, the phenyl + propargyl recombination provides a feasible mechanism for the addition of a second five-member ring to the first six-member aromatic ring producing the prototype two-ring species indene and indenyl. Rate expressions for all important reaction channels in a broad range of temperatures and pressures have been generated for kinetic modeling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Determining the hydronium pKα at platinum surfaces and the effect on pH-dependent hydrogen evolution reaction kinetics

Electrocatalytic hydrogen evolution reaction (HER) is critical for green hydrogen generation and exhibits distinct pH-dependent kinetics that have been elusive to understand. A molecular-level understanding of the electrochemical interfaces is essential for developing more efficient electrochemical processes. Here we exploit an exclusively surface-specific electrical transport spectroscopy (ETS) approach to probe the Pt-surface water protonation status and experimentally determine the surface hydronium pK a = 4.3. Quantum mechanics (QM) and reactive dynamics using a reactive force field (ReaxFF) molecular dynamics (RMD) calculations confirm the enrichment of hydroniums (H 3 O + * ) near Pt surface and predict a surface hydronium pK a of 2.5 to 4.4, corroborating the experimental results. Importantly, the observed Pt-surface hydronium pK a correlates well with the pH-dependent HER kinetics, with the protonated surface state at lower pH favoring fast Tafel kinetics with a Tafel slope of 30 mV per decade and the deprotonated surface state at higher pH following Volmer-step limited kinetics with a much higher Tafel slope of 120 mV per decade, offering a robust and precise interpretation of the pH-dependent HER kinetics. These insights may help design improved electrocatalysts for renewable energy conversion.

Zhong, Guangyan↗
DOE OSTI2025

Methanol adsorption and dissociation on GaP(110) studied by ambient pressure X-ray photoelectron spectroscopy

Ambient pressure X-ray photoelectron spectroscopy (AP-XPS) was used to investigate methanol (CH 3 OH) adsorption and reaction on the GaP(110) surface. Exposure of CH 3 OH to GaP(110) at room temperature led to the formation of at least four different surface species as indicated by analysis of C 1s and O 1s XPS features. By combining AP-XPS data with density functional theory calculations, the surface species were identified as methoxy (CH 3 O*), formaldehyde (CH 2 O*), and paired methanol (p-CH 3 O*H) and methoxy (p-CH 3 O*) species, where “paired” means that they belong to a hydrogen-bonded methoxy-methanol complex. Asterisk * here indicates an adsite. The formation of CH 2 O* via the dehydrogenation of CH 3 O* was shown to be limited by the availability of vacant phosphorus (P) sites on GaP(110). With an increase in CH 3 OH pressure, the fractional coverage of CH 3 O* species reached 0.55, and the surface P sites were completely saturated with hydrogen. Under a constant CH 3 OH pressure of 0.5 Torr, the surface concentration of the paired species and of CH 2 O* remained constant until 400 K. At higher temperatures, thermally driven reactions led to a significant increase in the concentration of surface CH x * species, which suggests that C-O bond cleavage of the CH 3 O group is the dominant decomposition mechanism on GaP(110). In conclusion, based on the reactivity of GaP(110) toward CH 3 OH dehydrogenation, elevated temperatures and CH 3 OH pressures may be used to functionalize this surface.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Unveiling the High-valence Oxygen Degradation Across the Delithiated Cathode Surface

Charge compensation on anionic redox reaction (ARR) has been promising to realize extra capacity beyond transition metal redox in battery cathodes. The practical development of ARR capacity has been hindered by high-valence oxygen instability, particularly at cathode surfaces. However, the direct probe of surface oxygen behavior has been challenging. Here, the electronic states of surface oxygen are investigated by combining mapping of resonant Auger electronic spectroscopy (mRAS) and ambient pressure X-ray photoelectron spectroscopy (APXPS) on a model LiCoO 2 cathode. The mRAS verified that no high-valence oxygen can sustain at cathode surfaces, while APXPS proves that cathode electrolyte interphase (CEI) layer evolves and oxidizes upon oxygen gas contact. In conclusion, this work provides valuable insights into the high-valence oxygen degradation mode across the interface. Oxygen stabilization from surface architecture is proven a prerequisite to the practical development of ARR active cathodes.

25 ENERGY STORAGE↗
DOE OSTI2020

Investigation of the reaction mechanism of the hydrodeoxygenation of propionic acid over a Rh(1 1 1) surface: A first principles study

Microkinetic models based on first principles calculations have been used to study the vapor and liquid phase hydrodeoxygenation of propionic acid on a Rh(111) surface. Calculations suggest that both decarboxylation and decarbonylation do not occur at an appreciable rate under all reaction environments. Propanol and propionaldehyde are the main products on this surface and they are produced at similar rates in both vapor and liquid phase environments. While a condensed phase can shift the reaction rate, the dominant pathways and selectivity towards the various products are hardly affected. At 473 K, the turnover frequency is increased by about a factor of 1.5 in liquid water relative to the gas phase. In liquid 1,4-dioxane, the turnover frequency is also slightly increased relative to the gas phase. Here, given the uncertainty in Rh cavity radius in the liquid phase calculations, computations with different cavity radii have been performed. With larger Rh cavity radius, the promotional effect of the solvents on the turnover frequency becomes more significant, while practically no changes are observed for a smaller cavity radius.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Nanoscale Compositional Mapping of Commercial LiNi 0.8 Co 0.15 Al 0.05 O 2 Cathodes Using Atom Probe Tomography

Nickel-rich cathodes provide improved specific capacity that lead to higher gravimetric energy density, critical for electric vehicles. However, poor long-term capacity retention at elevated temperatures/high C-rates (the rate of charge and discharge on a battery) stem from material issues: surface phase changes, corrosive side reactions with the electrolyte, ion dissolution and propagation of cracks. Introducing dopants, developing nanoscale surface coatings and graded core-shell structures have all improved the electrochemical performance of nickel-rich cathodes. However, a material level understanding on the effect of Li composition and distribution in Ni-rich cathodes is limited, due to a lack of characterization methods available that can directly image Li at the nanoscale. Hence, it is critical to establish methods such as atom probe tomography (APT), having both nanometer scale spatial resolution and high compositional sensitivity to quantitatively analyze battery cathodes. To fully realize its potential as a method for quantitative compositional analysis of commercial Li-ion batteries, we provide a comprehensive description of the challenges in sample preparation and analyze the dependency of the analysis parameters, specifically laser pulse energy on the measured stoichiometry of elements in a high Ni content cathode material; LiNi 0.8 Co 0.15 Al 0.05 O 2 (NCA). In this work, our findings show the stoichiometry variations cannot be explained by charge state ratios or Ga implantation damage alone during FIB preparation, indicating that additional factors such as crystallographic orientation may need to be considered to achieve quantitative nanoscale compositional analysis of such battery cathodes using APT.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Formation of Surface Impurities on Lithium–Nickel–Manganese–Cobalt Oxides in the Presence of CO 2 and H 2 O

Surface impurities involving parasitic reactions and gas evolution contribute to the degradation of high Ni content LiNi x Mn y Co z O 2 (NMC) cathode materials. The transient kinetic technique of Temporal Analysis of Products (TAP), density functional theory, and infrared spectroscopy have been used to study the formation of surface impurities on varying nickel content NMC materials (NMC811, NMC622, NMC532, NMC433, NMC111) in the presence of CO 2 and H 2 O. CO 2 reactivity on a clean surface as characterized by CO 2 conversion rate in the TAP reactor follows the order: NMC811 > NMC622 > NMC532 > NMC433 > NMC111. The capacity of CO 2 uptake follows a different order: NMC532 > NMC433 > NMC622 > NMC811 > NMC111. Moisture pretreatment slows down the direct CO 2 adsorption process and creates additional active sites for CO 2 adsorption. Electronic structure calculations predict that the (012) surface is more reactive than the ($10\bar{1}4$) surface for CO 2 and H 2 O adsorption. CO 2 adsorption leading to carbonate formation is exothermic with formation of ion pairs. The average CO 2 binding energies on the different materials follow the CO 2 reactivity order. Water hydroxylates the (012) surface and surface OH groups favor bicarbonate formation. Water creates more active sites for CO 2 adsorption on the ($10\bar{1}4$) surface due to hydrogen bonding. The composition of surface impurities formed in ambient air exposure is dependent on water concentration and the percentage of different crystal planes. Different surface reactivities suggest that battery performance degradation due to surface impurities can be mitigated by precise control of the dominant surfaces in NMC materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Low Catalyst Loading Enhances Charge Accumulation for Photoelectrochemical Water Splitting

Abstract Solar water oxidation is a critical step in artificial photosynthesis. Successful completion of the process requires four holes and releases four protons. It depends on the consecutive accumulation of charges at the active site. While recent research has shown an obvious dependence of the reaction kinetics on the hole concentrations on the surface of heterogeneous (photo)electrodes, little is known about how the catalyst density impacts the reaction rate. Using atomically dispersed Ir catalysts on hematite, we report a study on how the interplay between the catalyst density and the surface hole concentration influences the reaction kinetics. At low photon flux, where surface hole concentrations are low, faster charge transfer was observed on photoelectrodes with low catalyst density compared to high catalyst density; at high photon flux and high applied potentials, where surface hole concentrations are moderate or high, slower surface charge recombination was afforded by low‐density catalysts. The results support that charge transfer between the light absorber and the catalyst is reversible; they reveal the unexpected benefits of low‐density catalyst loading in facilitating forward charge transfer for desired chemical reactions. It is implied that for practical solar water splitting devices, a suitable catalyst loading is important for maximized performance.

Liu, Tianying↗
DOE OSTI2023

Low Catalyst Loading Enhances Charge Accumulation for Photoelectrochemical Water Splitting

Abstract Solar water oxidation is a critical step in artificial photosynthesis. Successful completion of the process requires four holes and releases four protons. It depends on the consecutive accumulation of charges at the active site. While recent research has shown an obvious dependence of the reaction kinetics on the hole concentrations on the surface of heterogeneous (photo)electrodes, little is known about how the catalyst density impacts the reaction rate. Using atomically dispersed Ir catalysts on hematite, we report a study on how the interplay between the catalyst density and the surface hole concentration influences the reaction kinetics. At low photon flux, where surface hole concentrations are low, faster charge transfer was observed on photoelectrodes with low catalyst density compared to high catalyst density; at high photon flux and high applied potentials, where surface hole concentrations are moderate or high, slower surface charge recombination was afforded by low‐density catalysts. The results support that charge transfer between the light absorber and the catalyst is reversible; they reveal the unexpected benefits of low‐density catalyst loading in facilitating forward charge transfer for desired chemical reactions. It is implied that for practical solar water splitting devices, a suitable catalyst loading is important for maximized performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Revisiting trends in the exchange current for hydrogen evolution

Nørskov and collaborators proposed a simple kinetic model to explain the volcano relation for the hydrogen evolution reaction on transition metal surfaces such that j 0 = k 0 f(ΔG H ) where j 0 is the exchange current density, f(ΔG H ) is a function of the hydrogen adsorption free energy ΔG H as computed from density functional theory, and k 0 is a universal rate constant. Herein, focusing on the hydrogen evolution reaction in acidic medium, we revisit the original experimental data and find that the fidelity of this kinetic model can be significantly improved by invoking metal-dependence on k 0 such that the logarithm of k 0 linearly depends on the absolute value of ΔG H . Here, we further confirm this relationship using additional experimental data points obtained from a critical review of the available literature. Our analyses show that the new model decreases the discrepancy between calculated and experimental exchange current density values by up to four orders of magnitude. Furthermore, we show the model can be further improved using machine learning and statistical inference methods that integrate additional material properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Mechanisms of Ethylene Epoxidation over Silver from Machine Learning-Accelerated First-Principles Modeling and Microkinetic Simulations

In this work we employed machine learning-augmented density functional theory (DFT) thermodynamic calculations to assess the stability of different AgO x structures under catalytic ethylene epoxidation reaction conditions. We found that there are multiple AgO x surface motifs that could co-exist under the relevant conditions. These included Ag surface oxides (e.g., AgO_p(4 × 4) and Ag 1.83 O) and atomic oxygen-covered Ag(111) surfaces. Furthermore, we employed DFT calculations to evaluate the energetics of different reaction mechanisms by which ethylene and oxygen can react on these surfaces. These studies revealed several energetically viable reaction pathways for ethylene epoxidation. Microkinetic modeling analyses, based on the DFT-calculated reaction pathways, showed that ethylene epoxidation can proceed on all surfaces and that multiple pathways, including those involving Langmuir–Hinshelwood and Eley–Rideal mechanisms, could be involved in selective and unselective reactions. The diversity of mechanisms that we discovered in the context of the relatively simple ethylene epoxidation reaction on Ag suggests that the richness and complexity of surface chemistry are most likely a rule rather than an exception in heterogeneous catalytic chemical transformations on metal surfaces and that the concept of a single or even a dominant mechanism and reaction intermediates might need to be revisited for many reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Subsurface Nitrogen Dissociation Kinetics in Lithium Metal from Metadynamics

The dissociation of molecular nitrogen in lithium is of interest for several promising technologies, such as the catalytic synthesis of ammonia in ambient or mild conditions. In this work we simulate nitrogen dissociation in the lithium BCC (110) surface at ambient and elevated temperatures using density functional theory (DFT) metadynamics simulations. The rate constants at temperatures of 300, 400, and 500 K are calculated by statistical analysis of the reaction time distributions from the accelerated simulations. This approach finds and estimates rate constants for transition pathways out of the initial state; the required input is the stable initial state and a reasonable choice of collective variable. A single collective variable is used in this case: the N–N distance. The results are robust to changes in metadynamics parameters, and the reaction time distributions follow the expected exponential distribution. We show that the metadynamics-derived rate constants are in agreement with results from the conventional harmonic approximation approach using a climbing image nudged elastic band (NEB) transition state search. The reaction barriers from metadynamics and the NEB/harmonic approximation agree to within 0.02–0.04 eV at all temperatures studied. This paper demonstrates that the harmonic approximation provides an accurate description of the rate constants for nitrogen dissociation in lithium metal, even at temperatures near or above the melting point of lithium, lending credence to previous and future theoretical studies using this approximation. Moreover, this work demonstrates a step toward the automated exploration and discovery of reaction mechanisms and associated rate constants for elementary surface-catalyzed reactions using DFT-based metadynamics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

BioRT-Flux-PIHM v1.0: a biogeochemical reactive transport model at the watershed scale

Watersheds are the fundamental Earth surface functioning units that connect the land to aquatic systems. Many watershed-scale models represent hydrological processes but not biogeochemical reactive transport processes. This has limited our capability to understand and predict solute export, water chemistry and quality, and Earth system response to changing climate and anthropogenic conditions. Here we present a recently developed BioRT-Flux-PIHM (BioRT hereafter) v1.0, a watershed-scale biogeochemical reactive transport model. The model augments the previously developed RT-Flux-PIHM that integrates land-surface interactions, surface hydrology, and abiotic geochemical reactions. It enables the simulation of (1) shallow and deep-water partitioning to represent surface runoff, shallow soil water, and deeper groundwater and of (2) biotic processes including plant uptake, soil respiration, and nutrient transformation. The reactive transport part of the code has been verified against the widely used reactive transport code CrunchTope. BioRT-Flux-PIHM v1.0 has recently been applied in multiple watersheds under diverse climate, vegetation, and geological conditions. This paper briefly introduces the governing equations and model structure with a focus on new aspects of the model. It also showcases one hydrology example that simulates shallow and deep-water interactions and two biogeochemical examples relevant to nitrate and dissolved organic carbon (DOC). These examples are illustrated in two simulation modes of complexity. One is the spatially lumped mode (i.e., two land cells connected by one river segment) that focuses on processes and average behavior of a watershed. Another is the spatially distributed mode (i.e., hundreds of cells) that includes details of topography, land cover, and soil properties. Whereas the spatially lumped mode represents averaged properties and processes and temporal variations, the spatially distributed mode can be used to understand the impacts of spatial structure and identify hot spots of biogeochemical reactions. The model can be used to mechanistically understand coupled hydrological and biogeochemical processes under gradients of climate, vegetation, geology, and land use conditions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

3D Printed Nickel–Molybdenum-Based Electrocatalysts for Hydrogen Evolution at Low Overpotentials in a Flow-Through Configuration

Three-dimensional (3D) printed, hierarchically porous nickel molybdenum (NiMo) electrocatalysts were synthesized and evaluated in a flow-through configuration for the hydrogen evolution reaction (HER) in 1.0 M KOH(aq) in a simple electrochemical H-cell. 3D NiMo electrodes possess hierarchically porous structures because of the resol-based aerogel precursor, which generates superporous carbon aerogel as a catalyst support. Relative to a traditional planar electrode configuration, the flow-through configuration allowed efficient removal of the hydrogen bubbles from the catalyst surface, especially at high operating current densities, and significantly decreased the overpotentials required for HER. An analytical model that accounted for the electrokinetics of HER as well as the mass transport with or without the flow-through configuration was developed to quantitatively evaluate voltage losses associated with kinetic overpotentials and ohmic resistance due to bubble formation in the porous electrodes. Furthermore, the chemical composition, electrochemical surface area (ECSA), and roughness factor (RF) were also systematically studied to assess the electrocatalytic performance of the 3D printed, hierarchically porous NiMo electrodes. An ECSA of 25163 cm2 was obtained with the highly porous structures, and an average overpotential of 45 mV at 10 mA cm–2 was achieved over 24 h by using the flow-through configuration. The flow-through configuration evaluated in the simple H-cell achieved high electrochemical accessible surface areas for electrochemical reactions and provided useful information for adaption of the porous electrodes in flow cells.

08 HYDROGEN↗
DOE OSTI2025

Photoelectrochemical Hydride Generation with Oxide-Coated Silicon

Photoelectrochemical generation of a potent organic hydride donor at silicon is demonstrated. Two different oxide-coated p-type silicon photoelectrodes reduced 1,2,3,5,6-pentamethyl-1H-benzo[d]imidazol-3-ium hexafluorophosphate, [PMBI][PF 6 ], to its corresponding imidazole hydride, PMBIH, in the presence of a proton source. Under 1 sun illumination, in acetonitrile with 1,5-diazabicyclo[4.3.0]non-5-ene (DBN) buffer, the p-Si photoelectrodes convert PMBI + to PMBIH with good Faradaic efficiencies (FEs): 78% FE at −2.3 V vs Fc +/0 for Si|TiO 2 and 83% FE at −2.6 V vs Fc +/0 for Si|SiO 2 (where Si|SiO 2 represents silicon coated with an oxide layer). Generally, the Si|TiO 2 catalyzed the reaction at milder potentials than Si|SiO 2 , but the Si|SiO 2 had better selectivity for PMBIH generation over H 2 evolution than Si|TiO 2 . In light of prior studies of these photoelectrodes, the differences in selectivity and onset potential suggest a difference in mechanism, likely an outer-sphere electron transfer (ET) mechanism at the SiO 2 surface and potentially a proton-coupled ET process at the TiO 2 surface. To help understand reaction efficiency and identify areas of improvement, a thermochemical model for understanding net hydride transfer from the semiconductor to an acceptor in solution was developed. We find that the reactions in the present system are quite downhill. The high overpotentials (even while maintaining selectivity over H 2 evolution) emphasize the need for improved catalysts. Furthermore, this approach to evaluate the thermodynamics of net hydride transfer should be broadly valuable for electrochemical and photoelectrochemical processes.

14 SOLAR ENERGY↗
DOE OSTI2023

Kinetically versus thermodynamically controlled factors governing elementary pathways of GaP(111) surface oxidation

GaP and related III-V semiconductors have attracted interest as high-efficiency photoelectrochemical electrodes for solar water splitting. However, their efficacy is linked to the presence, identity, and integrity of native surface oxides, which are structurally and chemically complex and evolve during operation. Using ambient pressure X-ray photoelectron spectroscopy (APXPS) coupled with ab initio simulations, we track key chemical motifs expressed during evolution of GaP(111) surface oxides, their associated reaction kinetics, and their correlations with electronic properties. We identify two distinct thermal regimes corresponding to kinetically and thermodynamically controlled oxidation. Below 600 K, exposure to O2 generates kinetically facile Ga-O-Ga configurations, whereas higher temperatures cause activated oxygen to insert into Ga–P bonds as part of a thermodynamically driven transformation into a complex, heterogeneous 3D network of surface POx (1≤x ≤ 4) groups and Ga2O3 species, the latter of which eventually dominates upon depletion of surface phosphorus. Here our study highlights the critical competition between kinetic and thermodynamic factors during GaP oxidation, yielding insights for fabricating stable III-P-based photoelectrodes with precisely engineered surface properties.

08 HYDROGEN↗
DOE OSTI2024

Surface Composition Impacts Selectivity of ZnTe Photocathodes in Photoelectrochemical CO 2 Reduction Reaction

Light-driven reduction of CO 2 into chemicals using a photoelectrochemical (PEC) approach is considered as a promising way to meet the carbon neutral target. The very top surface of the photoelectrode and semiconductor/electrolyte interface plays a pivotal role in defining the performance for PEC CO 2 reduction. However, such impact remains poorly understood. Here, we report an electrodeposition-annealing route for tailoring surface composition of ZnTe photocathodes. Our work demonstrates that a Zn-rich surface on the ZnTe photocathode is essential to impact the CO 2 reduction activity and selectivity. In particular, the Zn-rich surface not only facilitated the interfacial charge carrier transfer, but also acted as electrocatalyst for boosting carbon product selectivity and suppressing the hydrogen evolution reaction. This work provides a new avenue to optimize the photocathode, as well as improvement of the CO 2 RR performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗