Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “structural collapse”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Isostructural Phase Transition of Fe 2 ⁢O 3 under Laser Shock Compression

We present in situ x-ray diffraction and velocity measurements of Fe 2⁢ O 3 under laser shock compression at pressures between 38–122 GPa. None of the high-pressure phases reported by static compression studies were observed. Instead, we observed an isostructural phase transition from 𝛼−Fe 2⁢ O 3 to a new 𝛼′−Fe 2 ⁢O 3 phase at a pressure of 50–62 GPa. The 𝛼′−Fe 2⁢ O 3 phase differs from 𝛼−Fe 2 ⁢O 3 by an 11% volume drop and a different unit cell compressibility. We further observed a two-wave structure in the velocity profile, which can be related to an intermediate regime where both 𝛼 and 𝛼′ phases coexist. Furthermore, density functional theory calculations with a Hubbard parameter indicate that the observed unit cell volume drop can be associated with a spin transition following a magnetic collapse.

36 MATERIALS SCIENCE↗
NASA NTRS1975

Thermal instability in supernova shells

Thermal instability in the radiative-cooling region behind a shock will cause upstream density fluctuations to collapse into thin sheets aligned parallel to the shock front. A linearized calculation demonstrates the development of this instability. Thermal conduction suppresses the development of small-scale perturbations. Estimates of the scale sizes for the fully developed condensations agree roughly with the scale sizes of fine structure observed in supernova shells such as the Cygnus Loop.

Mccray, R.↗
NASA NTRS1982

Fluxless Brazing of Large Structural Panels

Fluxless brazing is used in fabricating aluminum structural panels that withstand high internal pressure. Aluminum sheet of structural thickness with 4045 aluminum/silicon-braze-alloy cladding is brazed to corrugated "fin stock" having channels 0.001 inch (0.03mm) high by same width. Process is carried out in an inert (argon) atmosphere in a retort furnace. Filler bars are used in some channels to prevent fin stock from collapsing as pressure is applied.

Beuyukian, C. S.↗
NASA NTRS1985

High transconductance InGaAs/AlGaAs pseudomorphic modulation-doped field-effect transistors

Pseudomorphic In0.15Ga0.85As/A10.15Ga0.85As modulation-doped field effect transistors (MODFET's) exhibiting extremely good dc characteristics have been successfully fabricated. dc transconductance in these strained-layer structures of 270 mS/mm was measured for 1-micron gate, normally-on devices at 300 K. Maximum drain current levels are 290 mA/mm, with excellent pinch-off and saturation characteristics. The transconductance increased to 360 mS/mm at 77 K while no persistent photoconductivity or drain collapse was observed. Preliminary microwave results indicate a 300-K current gain cutoff frequency of about 20 GHz. These results are equivalent to the best GaAs/AlGaAs MODFET results and are due in part to the improved transport properties and carrier confinement in the InGaAs quantum well.

Ketterson, A.↗
NASA NTRS2014

Mass Movement on Vesta at Steep Scarps and Crater Rims

The Quadrangles Av-11 and Av-12 on Vesta are located at the northern rim of the giant Rheasilvia south polar impact basin. The primary geologic units in Av-11 and Av-12 include material from the Rheasilvia impact basin formation, smooth material and different types of impact crater structures (such as bimodal craters, dark and bright crater ray material and dark ejecta material). Av-11 and Av-12 exhibit almost the full range of mass wasting features observed on Vesta, such as slump blocks, spur-and-gully morphologies and landslides within craters. Processes of collapse, slope instability and seismically triggered events force material to slump down crater walls or scarps and produce landslides or rotational slump blocks. The spur-and-gully morphology that is known to form on Mars is also observed on Vesta; however, on Vesta this morphology formed under dry conditions.

Geological processes↗
DOE OSTI2025

A miniature CRISPR–Cas10 enzyme confers immunity by inhibitory signalling

Microbial and viral co-evolution has created immunity mechanisms involving oligonucleotide signalling that share mechanistic features with human antiviral systems1. In these pathways, including cyclic oligonucleotide-based antiphage signalling systems (CBASSs) and type III CRISPR systems in bacteria and cyclic GMP–AMP synthase–stimulator of interferon genes (cGAS–STING) in humans, oligonucleotide synthesis occurs upon detection of virus or foreign genetic material in the cell, triggering the antiviral response2, 3–4. Here, in an unexpected inversion of this process, we show that the CRISPR-related enzyme mCpol synthesizes cyclic oligonucleotides constitutively as part of an active mechanism that represses a toxic effector. Cell-based experiments demonstrated that the absence or loss of mCpol-produced cyclic oligonucleotides triggers cell death, preventing the spread of viruses that attempt immune evasion by depleting host cyclic nucleotides. Structural and mechanistic investigation revealed mCpol to be a di-adenylate cyclase whose product, c-di-AMP, prevents toxic oligomerization of the effector protein 2TMβ. Analysis of cells by fluorescence microscopy showed that lack of mCpol allows 2TMβ-mediated cell death due to inner membrane collapse. These findings unveil a powerful defence strategy against virus-mediated immune suppression, expanding our understanding of the role of oligonucleotides in immunity.

Doherty, Erin E↗
DOE OSTI2025

Shock propagation in aerogel and TPP foams for inertial fusion energy target design

Achieving practical inertial fusion energy (IFE) requires the development of target designs with well-characterized microstructure and compression response. We measured shock dynamics in low-density (17.5–500 mg/cm 3 ) aerogel and two-photon polymerization (TPP) foams using x-ray phase contrast imaging (XPCI) methods and the Velocity Interferometer System for Any Reflector. By analyzing shock front evolution, we examined how target type and density influence shock propagation and energy dissipation. Talbot-XPCI shows that aerogels support a smooth, bowed shock front due to their homogeneous nanometer-scale pore network. In contrast, TPP foams exhibit irregular, stepwise propagation driven by interactions with their periodic micrometer-scale lattice. Shock velocity follows a power-law relation: aerogels deviate from classical ρ −1/2 scaling due to pore-collapse dissipation, while TPP foams follow the trend with larger uncertainties from density variations. Comparisons with xRAGE simulations reveal systematic underestimation of shock speeds. These results provide the first experimental constraints on shock propagation in TPP foams over a wide density range and highlight the influence of internal structure on anisotropic shock behavior. Our findings support improved benchmarking of EOS and hydrodynamic models and inform the design of foam architectures that promote implosion symmetry in IFE capsules.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1922

Causes of failure of airship shed

The causes of the collapse of airship shed, which was being taken down at Niediergorsdorf, are discussed. This shed, which was built of iron, was 184 m long, 28 m high, and 35 m wide. The demolition of the shed had been assigned to unskilled men who proceeded to remove certain key structural supports, leaving the structure in such a condition that relatively small eccentricities of the columns or spans or of lateral forces could easily have caused the columns or spans to break down. A small gust of wind would have perhaps sufficed to bring the building down. An analysis is also given of the suction effects on the roof of an air shed in Staaken. The damage to this shed, which occurred during a storm, was due to the fact that the shed had no opening in its top for equalizing the air pressure within and without. The location of the plates blown off the roof correspond to the point of greatest suction.

Sonntag, R↗
DOE OSTI2022

Functional Data Analysis for Extracting the Intrinsic Dimensionality of Spectra: Application to Chemical Homogeneity in the Open Cluster M67

High-resolution spectroscopic surveys of the Milky Way have entered the Big Data regime and have opened avenues for solving outstanding questions in Galactic archeology. However, exploiting their full potential is limited by complex systematics, whose characterization has not received much attention in modern spectroscopic analyses. In this work, we present a novel method to disentangle the component of spectral data space intrinsic to the stars from that due to systematics. Using functional principal component analysis on a sample of 18,933 giant spectra from APOGEE, we find that the intrinsic structure above the level of observational uncertainties requires ≈10 functional principal components (FPCs). Our FPCs can reduce the dimensionality of spectra, remove systematics, and impute masked wavelengths, thereby enabling accurate studies of stellar populations. To demonstrate the applicability of our FPCs, we use them to infer stellar parameters and abundances of 28 giants in the open cluster M67. We employ Sequential Neural Likelihood, a simulation-based Bayesian inference method that learns likelihood functions using neural density estimators, to incorporate non-Gaussian effects in spectral likelihoods. By hierarchically combining the inferred abundances, we limit the spread of the following elements in M67: Fe ≲ 0.02 dex; C ≲ 0.03 dex; O, Mg, Si, Ni ≲ 0.04 dex; Ca ≲ 0.05 dex; N, Al ≲ 0.07 dex (at 68% confidence). Our constraints suggest a lack of self-pollution by core-collapse supernovae in M67, which has promising implications for the future of chemical tagging to understand the star formation history and dynamical evolution of the Milky Way.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1982

Formation of the Galilean satellites in a gaseous nebula

A model for Galilean satellite formation is developed in which the satellites accrete in the presence of a dense, gaseous disk-shaped nebula and rapidly form optically thick, gravitationally bound primordial atmospheres. Partially differentiated structures are obtained for both Ganymede and Callisto, although the amount of partial differentiation of Callisto is small, possibly approaching zero for a narrow size distribution of infalling planetesimals. A nominal nebula of approximately 0.1 Jupiter masses is constructed by employing the likely surface density profiles and existing Jupiter collapse calculations. It is shown that satellites accrete very rapidly (dynamical time scales of 100-10,000 years) and their optically thick gaseous envelopes are unable to eliminate the heat of accretion by radiation. Water-saturated, convective, adiabatic envelopes form, through which planetesimals fall, break up, and partially disseminate their mass. The resulting satellite surface temperatures during accretion are calculated. It is concluded that the extensive differentiation undergone by Ganymede may provide the right environment for subsequent resurfacing, whereas the relative lack of differentiation for Callisto may explain the inferred absence of endogenic tectonism.

Lunine, J. I.↗
NASA NTRS2015

Buckling Test Results from the 8-Foot-Diameter Orthogrid-Stiffened Cylinder Test Article TA01

Results from the testing of cylinder test article SBKF-P2-CYLTA01 (referred to herein as TA01) are presented. The testing was conducted at the Marshall Space Flight Center (MSFC), November 19‒21, 2008, in support of the Shell Buckling Knockdown Factor (SBKF) Project.i The test was used to verify the performance of a newly constructed buckling test facility at MSFC and to verify the test article design and analysis approach used by the SBKF project researchers. TA01 is an 8-foot-diameter (96-inches), 78.0-inch long, aluminum-lithium (Al-Li), orthogrid-stiffened cylindrical shell similar to those used in current state-of-the-art launch vehicle structures and was designed to exhibit global buckling when subjected to compression loads. Five different load sequences were applied to TA01 during testing and included four sub-critical load sequences, i.e., loading conditions that did not cause buckling or material failure, and one final load sequence to buckling and collapse. The sub-critical load sequences consisted of either uniform axial compression loading or combined axial compression and bending and the final load sequence subjected TA01 to uniform axial compression. Traditional displacement transducers and strain gages were used to monitor the test article response at nearly 300 locations and an advanced digital image correlation system was used to obtain low-speed and high-speed full-field displacement measurements of the outer surface of the test article. Overall, the test facility and test article performed as designed. In particular, the test facility successfully applied all desired load combinations to the test article and was able to test safely into the postbuckling range of loading, and the test article failed by global buckling. In addition, the test results correlated well with initial pretest predictions.

Hilburger, Mark W.↗
NASA NTRS1974

Satellite geological and geophysical remote sensing of Iceland

The author has identified the following significant results. The seasonal change in size of sediment plumes from the many glacial rivers which discharge into the sea along the south coast gives an indication of seasonal changes in melting rates of glaciers. Changes in area of lakes, particularly glacier-margin lakes can be mapped of most of the area covered by glacial ice in Iceland. Recently deglaciated terrain can be distinguished on MSS color composites. The increase in surface area of the ice-dammed lake, Graenalon, was monitored until the occurrence of a jokulhlaup, after which the surface area of the lake was considerably reduced. The effect of two subglacial jokulhlaups on the overlying ice cover can be seen in the form of collapse features in the surface of Vatnajokull. MSS color composites permit the mapping of five distinct vegetation types; forests, cultivated areas, grasslands, reclaimed areas, and lichen-covered bedrock. Features as small as 100 m can be discerned. The ability to map landforms, vegetation distribution, occurrence of snowcover, glaciers, and geologic structure stereoscopically permits a much greater accurate analysis of these features.

Williams, R. S., Jr.↗
NASA NTRS1998

Buckling and Damage Resistance of Transversely-Loaded Composite Shells

Experimental and numerical work was conducted to better understand composite shell response to transverse loadings which simulate damage-causing impact events. The quasi-static, centered, transverse loading response of laminated graphite/epoxy shells in a [+/-45(sub n)/O(sub n)](sub s) layup having geometric characteristics of a commercial fuselage are studied. The singly-curved composite shell structures are hinged along the straight circumferential edges and are either free or simply supported along the curved axial edges. Key components of the shell response are response instabilities due to limit-point and/or bifurcation buckling. Experimentally, deflection-controlled shell response is characterized via load-deflection data, deformation-shape evolutions, and the resulting damage state. Finite element models are used to study the kinematically nonlinear shell response, including bifurcation, limit-points, and postbuckling. A novel technique is developed for evaluating bifurcation from nonlinear prebuckling states utilizing asymmetric spatial discretization to introduce numerical perturbations. Advantages of the asymmetric meshing technique (AMT) over traditional techniques include efficiency, robustness, ease of application, and solution of the actual (not modified) problems. The AMT is validated by comparison to traditional numerical analysis of a benchmark problem and verified by comparison to experimental data. Applying the technique, bifurcation in a benchmark shell-buckling problem is correctly identified. Excellent agreement between the numerical and experimental results are obtained for a number of composite shells although predictive capability decreases for stiffer (thicker) specimens which is attributed to compliance of the test fixture. Restraining the axial edge (simple support) has the effect of creating a more complex response which involves unstable bifurcation, limit-point buckling, and dynamic collapse. Such shells were noted to bifurcate into asymmetric deformation modes but were undamaged during testing. Shells in this study which were damaged were not observed to bifurcate. Thus, a direct link between bifurcation and atypical damage could not be established although the mechanism (bifurcation) was identified. Recommendations for further work in these related areas are provided and include extensions of the AMT to other shell geometries and structural problems.

Wardle, Brian L.↗
DOE OSTI2024

Landscape of nuclear deformation softness with spherical quasiparticle random-phase approximation

We investigate the stability and softness of nuclei against quadrupole, octupole, and hexadecapole deformation. By applying the spherical Skyrme-force Hartree-Fock Bardeen-Cooper-Schrieffer quasiparticle random phase approximation, we diagnose ground-state deformation when imaginary solutions are obtained, i.e., the spherical ground state collapses. We also calculate the multipole polarizability in spherical nuclei with no collapse, as a measure of softness. This numerically light and theoretically sound method is found able to capture deformation patterns across the nuclide chart. As a result, the connection between the intrinsic shape of nuclei and the dynamics of their low-lying collective states is established and the role of shell structure is discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

How Many Elements Matter?

Some studies of stars' multielement abundance distributions suggest at least 5–7 significant dimensions, but others show that many elemental abundances can be predicted to high accuracy from [Fe/H] and [Mg/Fe] (or [Fe/H] and age) alone. We show that both propositions can be, and are, simultaneously true. We adopt a machine-learning technique known as normalizing flow to reconstruct the probability distribution of Milky Way disk stars in the space of 15 elemental abundances measured by APOGEE. Conditioning on T eff and $\mathrm{log}\,g$ minimizes the differential systematics. After further conditioning on [Fe/H] and [Mg/Fe], the residual scatter for most abundances is σ [X/H] ≲ 0.02 dex, consistent with APOGEE's reported statistical uncertainties of ~0.01–0.015 dex and intrinsic scatter of 0.01–0.02 dex. Despite the small scatter, residual abundances display clear correlations between elements, which we show are too large to be explained by measurement uncertainties or by the finite sampling noise. We must condition on at least seven elements to reduce the correlations to a level consistent with the observational uncertainties. Our results demonstrate that cross-element correlations are a much more sensitive probe of a hidden structure than dispersion, and they can be measured precisely in a large sample even if the star-by-star measurement noise is comparable to the intrinsic scatter. We conclude that many elements have an independent story to tell, even for the mundane disk stars and elements produced by the core-collapse and Type Ia supernovae. The only way to learn these lessons is to measure the abundances directly, and not merely infer them.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1978

An alternative model for the Manicouagan impact structure

Geologic evidence suggests that the 210 million year old Manicouagan impact structure of eastern Quebec is an endogenically altered crater analogous to many lunar floor-fractured craters. According to this hypothesis, the impact at Manicouagan formed a transient cavity 80 km in diameter, generating melted target material which created a pool about 65 km in diameter in the bottom of the crater. Collapse of the transient crater rim and formation of a central peak-ring complex about 15 km in diameter subsequently occurred. Intrusion of a tabular magmatic body into the fractured and brecciated rock below the crater took place before recent glaciation; the intrusion caused an outer ring fracture around the crater.

Orphal, D. L.↗
NASA NTRS1982

Satellite observations of suprathermal electron bursts

Data from the ISIS 2 satellite are used to study the spatial distribution of the suprathermal electron bursts discovered by high-altitude sounding rockets. It is found that the bursts form an integral part of the boundary plasma sheet and are linked with the formation of discrete auroral arcs. The maximum energy of the bursts is always below the peak energy in neighboring discrete forms, and it appears that if the bursts fail to reach the minimum energy found to be necessary to sustain a discrete arc they collapse within a few seconds. It is suggested that in a pass across the auroral oval the overall envelope of the maximum energy in bursts and the peak energy in discrete auroral forms reflect the variation of the available acceleration (perhaps a parallel electric potential) across the auroral oval while the energy structure in individual forms is a function of the nonlinear processes which sustain them. This explanation appears to resolve the apparent discrepancy in scale thickness between rocket and satellite inverted V's.

Johnstone, A. D.↗
NASA NTRS1985

Protostars and planets - Overview from a planetary perspective

Today the simultaneous formation of a star and planetary system is understood to be natural and coupled consequences of the collapse of an interstellar cloud of molecular gas and dust. Ideas put forward to account for the existence of the solar system seem generally applicable to star formation throughout the universe. If this is indeed the case, then planetary systems should be present in large numbers throughout the universe. Even the gross structural features of the planetary system in the solar system seem largely to be the result of nearly deterministic processes, rather than the result of chance alone; many planetary systems throughout the universe may resemble this one. This chapter summarizes and examines some of the implications of ideas about the formation of stars and planetary systems.

Levy, E. H.↗