Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “structural alignment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Validating first-principles molecular dynamics calculations of oxide/water interfaces with x-ray reflectivity data

Metal oxide/water interfaces play a crucial role in many electrochemical and photocatalytic processes, such as photoelectrochemical water splitting, the creation of fuel from sunlight, and electrochemical CO 2 reduction. First-principles electronic structure calculations can reveal unique insights into these processes, such as the role of the alignment of the oxide electronic energy levels with those of liquid water. An essential prerequisite for the success of such calculations is the ability to predict accurate structural models of these interfaces, which in turn requires careful experimental validation. Here we report a general, quantitative validation protocol for first-principles molecular dynamics simulations of oxide/aqueous interfaces. The approach makes direct comparisons of interfacial x-ray reflectivity (XR) signals from experimental measurements and those obtained from ab initio simulations with semilocal and van der Waals functionals. The protocol is demonstrated here for the case of the Al 2 O 3 (001)/water interface, one of the simplest oxide/water interfaces. We discuss the technical requirements needed for validation, including the choice of the density functional, the simulation cell size, and the optimal choice of the thermodynamic ensemble. Our results establish a general paradigm for the validation of structural models and interactions at solid/water interfaces derived from first-principles simulations. Furthermore, while there is qualitative agreement between the simulated structures and the experimental best-fit structure, direct comparisons of simulated and measured XR intensities show quantitative discrepancies that derive from both bulk regions (i.e., alumina and water) as well as the interfacial region, highlighting the need for accurate density functionals to properly describe interfacial interactions. Our results show that XR data are sensitive not only to the atomic structure (i.e., the atom locations) but also to the electron-density distributions in both the substrate and at the interface.

36 MATERIALS SCIENCE↗
NASA NTRS2012

Method of Bonding Optical Elements with Near-Zero Displacement

The International X-ray Project seeks to build an x-ray telescope using thousands of pieces of thin and flexible glass mirror segments. Each mirror segment must be bonded into a housing in nearly perfect optical alignment without distortion. Forces greater than 0.001 Newton, or displacements greater than 0.5 m of the glass, cause unacceptable optical distortion. All known epoxies shrink as they cure. Even the epoxies with the least amount of shrinkage (<0.01%) cause unacceptable optical distortion and misalignment by pulling the mirror segments towards the housing as it cures. A related problem is that the shrinkage is not consistent or predictable so that it cannot be accounted for in the setup (i.e., if all of the bonds shrunk an equal amount, there would be no problem). A method has been developed that allows two components to be joined with epoxy in such a way that reduces the displacement caused by epoxy shrinking as it cures to less than 200 nm. The method involves using ultraviolet-cured epoxy with a displacement sensor and a nanoactuator in a control loop. The epoxy is cured by short-duration exposures to UV light. In between each exposure, the nano-actuator zeroes out the displacement caused by epoxy shrinkage and thermal expansion. After a few exposures, the epoxy has cured sufficiently to prevent further displacement of the two components. Bonding of optical elements has been done for many years, but most optics are thick and rigid elements that resist micro-Newton-level forces without causing distortion. When bonding thin glass optics such as the 0.40-mm thick IXO X-ray mirrors, forces in the micro- and milli-Newton levels cause unacceptable optical figure error. This innovation can now repeatedly and reliably bond a thin glass mirror to a metal housing with less than 0.2 m of displacement (<200 nm). This is an enabling technology that allows the installation of virtually stress-free, undistorted thin optics onto structures. This innovation is applicable to the bonding of thin optical elements, or any thin/flexible structures, that must be attached in an undistorted, consistent, and aligned way.

Robinson, David↗
DOE OSTI2020

Substrate-Dependent Band Structures in Trilayer Graphene / h - BN Heterostructures

The tight-binding model has been spectacularly successful in elucidating the electronic and optical properties of a vast number of materials. Within the tight-binding model, the hopping parameters that determine much of the band structure are often taken as constants. Here, using ABA-stacked trilayer graphene as the model system, we show that, contrary to conventional wisdom, the hopping parameters and therefore band structures are not constants, but are systematically variable depending on their relative alignment angle between h-BN. Moreover, the addition or removal of the h-BN substrate results in an inversion of the K and K' valley in trilayer graphene’s lowest Landau level. Our work illustrates the oft-ignored and rather surprising impact of the substrates on band structures of 2D materials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS2002

Formation metrology and control for large separated optics space telescopes

In this paper we present formation flying performance analysis initial results for a representative large space telescope composed of separated optical elements [Mett 02]. A virtual-structure construct (an equivalent rigid body) is created by unique metrology and control that combines both centralized and decentralized methods. The formation may be in orbit at GEO for super-resolution Earth observation, as in the case of Figure 1, or it may be in an Earth-trailing orbit for astrophysics, Figure 2. Extended applications are envisioned for exo-solar planet interferometric imaging by a formation of very large separated optics telescopes, Figure 3. Space telescopes, with such large apertures and f/10 to f/100 optics, are not feasible if connected by massive metering structures. Instead, the new virtual-structure paradigm of information and control connectivity between the formation elements provides the necessary spatial rigidity and alignment precision for the telescope.

formation flying virtual-structure telescopes↗
DOE OSTI2025

A Panoramic View of MXenes via an Atomic Coordination‐Based Design Strategy

Two‐dimensional (2D) transition metal carbides and nitrides, known as MXenes, possess unique physical and chemical properties, enabling diverse applications in fields ranging from energy storage to communication, catalysis, sensing, healthcare, and beyond. Despite extensive research and notable advancements, a fundamental understanding of MXenes’ phase diversity and its connection to their hierarchical precursors, including the intermediate MAX phases and the ancestral bulk phases, remains limited. Here, in this study, it is hypothesized that the atomic coordination environments adopted by transition metal and nonmetallic atoms in their three‐dimensional (3D) bulk precursors may persist in 2D MXenes to govern their phase diversity. Using high‐throughput modeling based on first‐principles density functional theory, a wide range of MXene phases is unveiled and comprehensively evaluate their relative stabilities across a large chemical space. The key to the approach lies in considering various atomic coordination environments drawn from four types of ancestral bulk phases. Through this comprehensive structural library of MXenes, general guiding principles are uncovered, such as a close alignment between the phase stability of MXenes and that of their 3D precursors. These findings introduce a new design strategy in which the atomic coordination environments in bulk phases can serve as reliable predictors for accessing the diverse structural landscape of MXenes.

MXenes↗
DOE OSTI2022

Imaging active site chemistry and protonation states: NMR crystallography of the tryptophan synthase α-aminoacrylate intermediate

NMR-assisted crystallography-the integrated application of solid-state NMR, X-ray crystallography, and first-principles computational chemistry-holds significant promise for mechanistic enzymology: by providing atomic-resolution characterization of stable intermediates in enzyme active sites, including hydrogen atom locations and tautomeric equilibria, NMR crystallography offers insight into both structure and chemical dynamics. Here, this integrated approach is used to characterize the tryptophan synthase α-aminoacrylate intermediate, a defining species for pyridoxal-5'-phosphate-dependent enzymes that catalyze β-elimination and replacement reactions. For this intermediate, NMR-assisted crystallography is able to identify the protonation states of the ionizable sites on the cofactor, substrate, and catalytic side chains as well as the location and orientation of crystallographic waters within the active site. Most notable is the water molecule immediately adjacent to the substrate β-carbon, which serves as a hydrogen bond donor to the ε-amino group of the acid-base catalytic residue βLys87. From this analysis, a detailed three-dimensional picture of structure and reactivity emerges, highlighting the fate of the L-serine hydroxyl leaving group and the reaction pathway back to the preceding transition state. Reaction of the α-aminoacrylate intermediate with benzimidazole, an isostere of the natural substrate indole, shows benzimidazole bound in the active site and poised for, but unable to initiate, the subsequent bond formation step. When modeled into the benzimidazole position, indole is positioned with C3 in contact with the α-aminoacrylate C $\bar{β}$ and aligned for nucleophilic attack. Here, the chemically detailed, three-dimensional structure from NMR-assisted crystallography is key to understanding why benzimidazole does not react, while indole does.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1985

Deployable controllable geometry truss beam

A study was conducted on a truss beam structural concept that can deploy and maneuver in a serpentine manner to align or position the truss beam tip. The truss beam is composed of a series of rod members connected together at joints that provide the required rotational degrees of freedom. The current study was conducted to evaluate the requirements of the joints and define a mechanical assembly that could provide both high structural stiffness and the required maneuverability. The truss beam requires two joint types; both types were fabricated and incorporated in a demonstration model. An analysis of the concept was performed to define the location and orientation of the beam tip during deployment and serpentine maneuvers.

Rhodes, M. D.↗
NASA NTRS1993

Plasma irregularities caused by cycloid bunching of the CRRES G-2 barium release

The Combined Release and Radiation Effects Satellite (CRRES) spacecraft carried a number of barium thermite canisters for release into the upper atmosphere. The barium release labeled G-2 showed evidence of curved irregularities not aligned with the ambient magnetic field B. The newly discovered curved structures can be explained by a process called cycloid bunching. Cycloid bunching occurs when plasma is created by photoionization of a neutral cloud injected at high velocity perpendicular to B. If the injection velocity is much larger than the expansion speed of the cloud, the ion trail will form a cycloid that has irregularities spaced by the product of the perpendicular injection speed and the ion gyroperiod, Images of the solar-illuminated barium ions are compared with the results of a three-dimensional kinetic simulation. Cycloid bunching is shown to be responsible for the rapid generation of both curved and field-aligned irregularities in the CRRES G-2 experiment.

Bernhardt, P. A.↗
DOE OSTI2021

SCOPe: improvements to the structural classification of proteins – extended database to facilitate variant interpretation and machine learning

Abstract The Structural Classification of Proteins—extended (SCOPe, https://scop.berkeley.edu) knowledgebase aims to provide an accurate, detailed, and comprehensive description of the structural and evolutionary relationships amongst the majority of proteins of known structure, along with resources for analyzing the protein structures and their sequences. Structures from the PDB are divided into domains and classified using a combination of manual curation and highly precise automated methods. In the current release of SCOPe, 2.08, we have developed search and display tools for analysis of genetic variants we mapped to structures classified in SCOPe. In order to improve the utility of SCOPe to automated methods such as deep learning classifiers that rely on multiple alignment of sequences of homologous proteins, we have introduced new machine-parseable annotations that indicate aberrant structures as well as domains that are distinguished by a smaller repeat unit. We also classified structures from 74 of the largest Pfam families not previously classified in SCOPe, and we improved our algorithm to remove N- and C-terminal cloning, expression and purification sequences from SCOPe domains. SCOPe 2.08-stable classifies 106 976 PDB entries (about 60% of PDB entries).

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Successive neutron alignments in the yrast, negative-parity band of oblate-deformed Tl 199

The negative-parity band structure built on the proton h 9/2 state in 199 Tl has been established up to an excitation energy of 7 MeV and spin of (51/2) ℏ. The level scheme has been extended with the inclusion of fourteen new transitions de-exciting levels at high spin. The ΔI = 1 γ rays are found to be more prominently visible in the spectra when comparing to Δ I = 2 transitions. Rotation alignments are evident at frequencies of 0.22 and 0.30 MeV with both being attributed to the breaking of pairs of neutrons in the i 13/2 subshell. Since 199 Tl is expected to have weak oblate deformation, and lies in a transitional region where competing contributions to the spin are expected from collective rotation and the angular momentum of high-j nucleons, calculations using both the principal axis cranking (PAC) and tilted axis cranking (TAC) formalisms have been performed to understand its structure. Both the PAC and TAC calculations are found to provide a satisfactory description of the evolution of excitation energies with spin. The PAC calculations give a good account of the experimental crossing frequencies and associated spins. Furthermore, the structure of the yrast, negative-parity band in 199 Tl may be primarily understood in terms of the collective rotation of a moderately deformed oblate nucleus, along with contributions to the angular momentum from two pairs of rotation-aligned i 13/2 neutrons.

190 ≤ A ≤ 219↗
NASA NTRS1994

Auroral plasma transport processes in the presence of kV potential structures

We have simulated plasma transport processes in the presence of a quasi-two-dimensional current filament, that generated kV potential structure in the auroral region. The simulation consists of a set of one-dimensional flux tube simulations with different imposed time-dependent, field-aligned currents. The model uses the 16 moment system of equations and simultaneously solves coupled continuity and momentum equations and equations describing the transport along the magnetic field lines of parallel and perpendicular thermal energy and heat flows for each species. The lower end of the simulation is at an altitude of 800 km, in the collisional topside ionosphere, while the upper end is at 10 R(sub E) in the magnetosphere. The plasma consists of hot electrons and protons of magnetospheric origin and low-energy electrons, protons, and oxygen ions of ionospheric origin. The dynamical interaction of the individual current filaments with ionospheric and magnetospheric plasma generates a potential structure in the horizontal direction and kilovolt field-aligned potential drops along the field lines. The side-by-side display exhibits the evolution of the implied potential structure in the horizontial direction. In the presence of this potential structure and parallel electric field ionospheric plasma density is depleted and velocity is reduced, while density enhancement and increased velocity is observed in magnetospheric plasma. The ionospheric and magnetospheric electron temperatures increase below 2 R(sub E) due to magnetic mirror force on converging geomagnetic field lines. The primary cross-field motion produced by the horizontal E field (E x B drift) is perpendicular to both of the significant spatial directions and is thus ignorable in this geometry. The effects of other cross-field drift processes are discussed. The simulation thus provides insight into the dynamical evolution of two-dimensional potential structures driven by an imposed finite width, field-aligned current profile.

Ganguli, Supriya B.↗
DOE OSTI2021

Layer Hall effect in a 2D topological axion antiferromagnet

While ferromagnets have been known and exploited for millennia, antiferromagnets (AFMs) were only discovered in the 1930s. The elusive nature indicates AFMs' unique properties: At large scale, due to the absence of global magnetization, AFMs may appear to behave like any non-magnetic material; However, such a seemingly mundane macroscopic magnetic property is highly nontrivial at microscopic level, where opposite spin alignment within the AFM unit cell forms a rich internal structure. In topological AFMs, such an internal structure leads to a new possibility, where topology and Berry phase can acquire distinct spatial textures. Here, we study this exciting possibility in an AFM Axion insulator, even-layered MnBi 2 Te 4 flakes, where spatial degrees of freedom correspond to different layers. Remarkably, we report the observation of a new type of Hall effect, the layer Hall effect, where electrons from the top and bottom layers spontaneously deflect in opposite directions. Specifically, under no net electric field, even-layered MnBi 2 Te 4 shows no anomalous Hall effect (AHE); However, applying an electric field isolates the response from one layer and leads to the surprising emergence of a large layer-polarized AHE (~50e 2 /h). Such a layer Hall effect uncovers a highly rare layer-locked Berry curvature, which serves as a unique character of the space-time PT-symmetric AFM topological insulator state. Moreover, we found that the layer-locked Berry curvature can be manipulated by the Axion field, E∙B, which drives the system between the opposite AFM states. Our results achieve previously unavailable pathways to detect and manipulate the rich internal spatial structure of fully-compensated topological AFMs. The layer-locked Berry curvature represents a first step towards spatial engineering of Berry phase, such as through layer-specific moiré potential.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Estimating Return on Investment for Energy Technical Assistance Programs

The U.S. Department of Energy's Office of State and Community Energy Programs engaged the National Laboratory of the Rockies to assess the return on investment (ROI) of technical assistance (TA) programs that support state, local, and Tribal energy planning. Although TA delivers value through capacity building, stakeholder engagement, and knowledge transfer, these benefits are often intangible and challenging to monetize. This study reviews existing ROI frameworks and synthesizes the most relevant elements into a hybrid approach tailored to energy TA programs. The proposed framework integrates monetary and non-monetary outcomes through early logic model development, baseline data collection, and the use of proxies for intangible benefits. As a case study, this paper applies this approach to the Communities Local Energy Action Program (Communities LEAP), demonstrating how ROI can inform program design, data strategy, and performance assessment. Findings underscore that ROI should be applied selectively and planned from the outset to ensure data alignment and attribution accuracy. The framework offers TA practitioners a structured approach that can be leveraged for future programs to evaluate and communicate the multifaceted value of TA investments.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
NASA NTRS1977

Design study of the deepsky ultraviolet survey telescope

Preliminary mechanical design and specifications are presented for a wide field ultraviolet telescope and detector to be carried as a Spacelab payload. Topics discussed include support structure stiffness (torsional and bending), mirror assembly, thermal control, optical alignment, attachment to the instrument pointing pallet, control and display, power requirements, acceptance and qualification test plans, cost analysis and scheduling. Drawings are included.

Page, N. A.↗
NASA NTRS1980

A magnetohydrodynamic model for corotating interplanetary structures

A model is developed which treats interplanetary structures as a small-scale incompressible Alfvenic fluctuation superposed on a large-scale background flow, and uses the complete magnetohydrodynamic equations and the full energy equation to describe the interplanetary structures. For steady-state corotating structures the model assumes the background flow to be field aligned, and the nonlinear system is treated as being composed of two subsets: one dealing with the expansion of the solar wind in stream tubes, the other with the interaction between neighboring stream tubes. The expansion subset has a singularity at Parker's critical radius, and the interaction subset has a singularity at the Alfvenic point. Concerning the region where the flow velocity is super-Alfvenic, the characteristic equation is derived, and a general method of numerical solution for the three-dimensional problems based on the characteristics theory is discussed. In addition, a viscous WKB solution of the microscale system is presented.

Whang, Y. C.↗
NASA NTRS1982

DE-2 cusp observations - Role of plasma instabilities in topside ionospheric heating and density fluctuations

Observations by the low altitude Dynamics Explorer satellite (DE-2) in the polar cusp show the ionospheric plasma electron temperature and the ratio of electron to ion temperature to be increased, and the electron density fluctuations to be enhanced. Also, downward fluxes of energetic eletrons and ions increase in the cusp, and the magnetic field structure are consistent with the existence of a field-aligned current. Simultaneously, there is characteristic broadband electrostatic noise (BEN) with amplitudes of 1-10 mV/m, peaking in the cusp but extending into the polar cap. These emissions range from far below the local 0(+) gyrofrequency F sub O(+) to the vicinity of the proton gyrofrequency, but below the oxygen lower hybrid frequency. The BEN observations are compared to the predictions of several theories. The amplitude of these waves is shown to be far too small to contribute significantly to the observed ionospheric heating or density fluctuations by local wave-particle interactions. Rather, the observed spatial variations are attributed to nonlocal field aligned heating processes and reflect the nonuniformity of the magnetosheath plasma's penetration into the ionosphere.

Curtis, S. A.↗
NASA NTRS1983

LDR segmented mirror technology assessment study

In the mid-1990s, NASA plans to orbit a giant telescope, whose aperture may be as great as 30 meters, for infrared and sub-millimeter astronomy. Its primary mirror will be deployed or assembled in orbit from a mosaic of possibly hundreds of mirror segments. Each segment must be shaped to precise curvature tolerances so that diffraction-limited performance will be achieved at 30 micron (nominal operating wavelength). All panels must lie within 1 micron on a theoretical surface described by the optical precipitation of the telescope's primary mirror. To attain diffraction-limited performance, the issues of alignment and/or position sensing, position control of micron tolerances, and structural, thermal, and mechanical considerations for stowing, deploying, and erecting the reflector must be resolved. Radius of curvature precision influences panel size, shape, material, and type of construction. Two superior material choices emerged: fused quartz (sufficiently homogeneous with respect to thermal expansivity to permit a thin shell substrate to be drape molded between graphite dies to a precise enough off-axis asphere for optical finishing on the as-received a segment) and a Pyrex or Duran (less expensive than quartz and formable at lower temperatures). The optimal reflector panel size is between 1-1/2 and 2 meters. Making one, two-meter mirror every two weeks requires new approaches to manufacturing off-axis parabolic or aspheric segments (drape molding on precision dies and subsequent finishing on a nonrotationally symmetric dependent machine). Proof-of-concept developmental programs were identified to prove the feasibility of the materials and manufacturing ideas.

Krim, M.↗