SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The spectrophotometry (0.3 to 1.1 microns) of visited and proposed Apollo landing sites is presented along with proposals for financial support of the spectral study. The electronic spectra of pyroxenes is investigated along with an interpretation of telescopic spectral reflectivity curves of the moon. Reprints of published articles related to these studies are included.
Two methods are described which are used to estimate soil moisture remotely using the 0.4- to 14.0 micron wavelength region: (1) measurement of spectral reflectance, and (2) measurement of soil temperature. The reflectance method is based on observations which show that directional reflectance decreases as soil moisture increases for a given material. The soil temperature method is based on observations which show that differences between daytime and nighttime soil temperatures decrease as moisture content increases for a given material. In some circumstances, separate reflectance or temperature measurements yield ambiguous data, in which case these two methods may be combined to obtain a valid soil moisture determination. In this combined approach, reflectance is used to estimate low moisture levels; and thermal inertia (or thermal diffusivity) is used to estimate higher levels. The reflectance method appears promising for surface estimates of soil moisture, whereas the temperature method appears promising for estimates of near-subsurface (0 to 10 cm).
Complete seasonal ERTS-1 coverage of Atlantic coastal wetlands from Delaware Bay to Georgia provides a basis for assessment of temporal data for wetland mapping, evaluation, and monitoring. Both MSS imagery and digital data have proved useful for gross wetland species delineation and determination of the upper wetland boundary. Tidal effects and (band to band or seasonal) spectral reflectance differences make it possible to type vegetatively coastal wetlands in salinity related categories. Management areas, spoil disposal sites, drainage ditches, lagoon-type developments and highway construction can be detected indicating a monitoring potential for the future. A northern test site (Maryland-Virginia) and a southern test site (Georgia-South Carolina), representing a range of coastal marshes from saline to fresh, were chosen for intensive study. Wetland maps were produced at various scales using both ERTS imagery (bands 5 and 7) and digital data (bands 4, 5 and 7).
The extensive photometric observations of Titan, Iapetus, Rhea, Dione and Tethys have made it possible to separate the solar phase and orbital phase contributions to the observed light variations of these satellites. For Titan, the wavelength dependence of its solar phase coefficient has been obtained. This dependence should prove useful in constructing future model atmospheres. The other four satellites show a surprising array of different photometric behaviors. Despite these differences, all four satellites have similar spectral reflectivities. Clearly Iapetus, Rhea, Dione and Tethys are complex objects, varying substantially from one another in surface structure and/or composition.
Similarities in daytime spectral reflectivities and nighttime infrared emission from Mercury and the moon are shown to imply that the atmosphere of Mercury must be tenuous, like that of the moon. The theory of formation, transport, and loss in the lunar atmosphere is applied to Mercury. Models of the Hermian atmosphere at perihelion and aphelion are presented, based on the solar wind as the dominant source of gases. Only the noncondensable species - hydrogen, helium and neon - are considered. Of these, helium is the most abundant atmospheric gas, with maximum concentration of about 40,000,000 per cu cm at the nighttime surface. The maximum concentration of H2 is 6,000,000 per cu cm, and that of neon is 700,000 per cu cm.
Two methods under consideration for making remote estimates of soil moisture involve measurements made in electromagnetic spectral region of 0.4 to 14.0 micrometers: (1) spectral reflectance, (2) soil temperature.
Correlations of asteroid spectral reflectivity characteristics with orbital parameters have been sought. Asteroid proper elements and extreme heliocentric distance were examined. Only general trends were noted, primarily red asteroids and asteroids with IR (.95 micron) absorption bands are concentrated toward the inner part of the belt. Also, asteroids with the pyroxene band tend to have larger proper eccentricities relative to non-banded asteroids.
The author has identified the following significant results. ERTS-1 MSS data have been used in a variety of hydrologic research including snow-extent mapping; studies of snowmelt, snowmelt runoff, spectral reflectance of snow for assessing snowpack conditions, and snow albedo; lake ice formation, breakup, and migration; lake current measurements; multispectral studies of lake ice; and flood studies. MSS sensing of soil moisture over a well-vegetated test site was unsuccessfully attempted. Although a powerful research tool, ERTS-1 has very limited use as an operational system for hydrologic communities because of its 18-day revisit cycle and its lack of a quick look capability.
The spectral reflectance properties of a commercially prepared black chrome over dull nickel, both plated on steel, for various plating times of the black chrome were measured. The plating current was 180 amperes per square foot. Values of absorptance integrated over the solar spectrum, and of infrared emittance integrated over black-body radiation at 250 F were obtained. It is shown that plating between one and two minutes produces the optimum combination of highest heat absorbed and lowest heat lost by radiation.
The author has identified the following significant results. A technique which combines digital computer processing and color composition was devised for detecting hydrothermally altered areas and for discriminating among many rock types in an area in south-central Nevada. Subtle spectral reflectance differences among the rock types are enhanced by ratioing and contrast-stretching MSS radiance values for form ratio images which subsequently are displayed in color-ratio composites. Landform analysis of Nevada shows that linear features compiled without respect to length results in approximately 25 percent coincidence with mapped faults. About 80 percent of the major lineaments coincides with mapped faults, and substantial extension of locally mapped faults is commonly indicated. Seven major lineament systems appear to be old zones of crustal weakness which have provided preferred conduits for rising magma through periodic reactivation.
A model is suggested for Io's surface composition involving evaporite salt deposits, rich in sodium and sulfur. According to this model, these deposits were produced as a result of the migration of salt-saturated aqueous solutions to Io's surface from a warm or hot interior followed by loss of the water to space. This model satisfies cosmochemical constraints based on Io's initial composition, current density, and thermal history. Salt-rich assemblages are easily derivable from the leaching of carbonaceous chondritic material. The chemical and optical properties of such deposits, after modification by irradiation, can be used to explain Io's overall albedo and spectral reflectance, its dark reddish poles, and the observed sodium emission as well as or better than other currently suggested materials.
Two methods are used to estimate soil moisture remotely using the 0.4- to 14.0-micron wavelength region: (1) measurement of spectral reflectance, and (2) measurement of soil temperature. The reflectance method is based on observations which show that directional reflectance decreases as soil moisture increases for a given material. The soil temperature method is based on observations which show that differences between daytime and nighttime soil temperatures decrease as moisture content increases for a given material. In some circumstances, separate reflectance or temperature measurements yield ambiguous data, in which case these two methods may be combined to obtain a valid soil moisture determination. In this combined approach, reflectance is used to estimate low moisture levels; and thermal inertia (or thermal diffusivity) is used to estimate higher levels. The reflectance method appears promising for surface estimates of soil moisture, whereas the temperature method appears promising for estimates of near-subsurface (0 to 10 cm).
Classification, delineation and evaluation of coastal wetlands can be made on the basis of major vegetative associations. To produce wetland maps, two vegetation-analysis look-up tables were developed for use in the ERTS ANALYSIS System. These look-up tables are based on Earth Resources Technology Satellite (ERTS) digital values in Multispectral Scanner (MSS) bands 4, 5, and 7 and were developed using seasonal spectral reflectance measurements from field observations. Computer-generated maps at an approximate scale of 1:20,000 were produced for the primary test site, Chincoteague Marsh, Virginia. There is a high degree of accuracy in the identification of wetland features and plant associations. The classification was also tested on other Atlantic coast salt marshes and a brackish marsh in the Chesapeake Bay.
The spectral reflectance of a cropped surface changes as the plant develops. An indicator of crop growth is leaf area index (ratio of green leaf area to soil area). The leaf area index, disease severity, and yield were determined for several winter wheat fields in Kansas during the 1973 growing season. Multispectral scanner (MSS) data from Earth Resources Technology Satellite-1 (ERTS-1) showed a high correlation (r greater than or equal to 0.90) between crop growth and MSS4/MSS5, and crop growth and MSS5/MSS6. Wheat disease severity and yields were significantly correlated at the 5% level with MSS4/MSS6 and with MSS4/MSS7. Further investigation is required before ERTS imagery can be routinely used detecting and estimating disease severity and yield reduction.
We report the first results of a new program of asteroid photometry at wavelengths of 1.25, 1.65, and 2.2 mu. In this paper the observations of three asteroids are reduced to spectral reflectance. Ceres and Pallas have surfaces which are probably composed of carbonaceous chondritic-type material. A basaltic achondritic composition remains a good candidate for Vesta.
Computer processing of MSS data to identify and map citrus trees affected by young tree decline is analyzed. The data were obtained at 1500-feet altitude in six discrete spectral bands covering regions from 0.53 to 1.3 millimicrons as well as from instrumental ground truths of tree crowns. Measurable spectral reflectance intensity differences are observed in the leaves of healthy and diseased trees, especially at wavelengths of 500 to 600 nm and 700 to 800 nm. The overall accuracy of the method is found to be 89%.
A radiation effects experimental program was performed, in which second surface mirror type thermal control coatings were exposed to ultraviolet radiation, electrons, and protons simultaneously. Stability was assessed by making periodic spectral reflectance measurements in situ (and in air after testing for comparison). Solar absorption coefficients were derived by computer. Many of the exposed materials showed large amounts of degradation in reflectance absorptance, principally due to the electron exposure. A series of tests was conducted, leading to the identification of a modified second surface mirror that shows considerable improvement and promise for stability during thermal control applications in a charged particle space radiation environment.
A bidirectional reflectometer system was developed for in situ measurements of the changes in spectral reflectance of surfaces contaminated with films of organic materials. The system permits experiments with films of controlled thickness in an environment that simulates the thermal, radiation, and vacuum conditions of space. The mechanical and optical construction of the reflectometer are discussed in detail, and actual data curves are used to illustrate its operation and performance.