Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “silver”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

ATR-SEIRAS Method to Measure Interfacial pH during Electrocatalytic Nitrate Reduction on Cu

This study reports the accuracy and applications of an attenuated total reflectance–surface-enhanced infrared absorption spectroscopy (ATR–SEIRAS) technique to indirectly measure the interfacial pH of the electrolyte within 10 nm of the electrocatalyst surface. This technique can be used in situ to study aqueous electrochemical reactions with a calibration range from pH 1–13, time resolution down to 4 s, and an average 95% confidence interval of 14% that varies depending on the pH region (acidic, neutral, or basic). The method is applied here to electrochemical nitrate reduction at a copper cathode to demonstrate its capabilities, but is broadly applicable to any aqueous electrochemical reaction (such as hydrogen evolution, carbon dioxide reduction, or oxygen evolution) and the electrocatalyst may be any SEIRAS-active thin film (e.g., silver, gold, or copper). The time-resolved results show a dramatic increase in the interfacial pH from pH 2–7 in the first minute of operation during both constant current and pulsed current experiments where the bulk pH is unchanged. Attempts to control the pH polarization at the surface by altering the electrochemical operating conditions—lowering the current or increasing the pulse frequency—showed no significant change, demonstrating the challenge of controlling the interfacial pH.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Is the Chemisorbed CO 2 in Ionic Liquid Electrolytes Active for Electrochemical Utilization? A Case Study on Carboxylate and Carbamate Speciation

This study examines the activity of chemisorbed CO 2 species in the microenvironment formed by bifunctional ionic liquids (ILs) in the reactive capture and conversion (RCC) of CO 2 to CO on silver. Comparative electroanalytical measurements with imidazolium based ILs were performed to probe the impact of electrostatic interactions, anion and cation basicity, and hydrogen bonding on RCC. Particularly, ILs with 1-ethyl-3-methylimidazolium ([EMIM]+) and 1-ethyl-2,3-dimethylimidazolium ([EMMIM]+) cations and aprotic heterocyclic anions of 2-cyanopyrrolide ([2-CNpyr]) and 1,2,4-triazolide ([124-Triz]) were examined for RCC. It was found that anion–CO 2 carbamate complexes facilitate RCC at significantly lower overpotentials compared to cation–CO 2 carboxylate complexes. Additionally, [EMIM]+ was found to better stabilize anion–CO 2 complexes at the interface than [EMMIM]+. Furthermore, it was found that 2-CNpyrH that naturally forms during CO 2 absorption competes for electrode surface adsorption with the anion–CO 2 carbamate complex, thereby reducing the electrochemical activity of the anion–CO 2 complex. These results highlight the importance of IL structure in tuning the interfacial interactions and suggest that ILs with anion-dominated CO 2 chemisorption enhances CO 2 utilization in RCC applications.

Coskun, Oguz Kagan [Case Western Reserve Univ., Cl↗
DOE OSTI2022

Using Membranes with Internal Microchannels to Prevent Drying-out during CO 2 Electrolysis

Scaling up CO 2 electrolysis is a vital aspect in the transition to manufacturing sustainable fuels and chemical compounds, satisfying the demand for chemicals and demand for storing renewable electricity. Depending on the employed catalyst, different products can be produced, such as carbon monoxide and ethylene, by applying a voltage on a CO 2 and H 2 O fed electrolyzer. CO is a desirable product according to techno-economic analysis, because it can be produced selectively using a silver catalyst and is a precursor for hydrocarbons in the Fischer–Tropsch process. In a state-of-the-art CO 2 electrolyzer, two electrodes are directly pressed against an ion-exchange membrane – this is called a zero-gap configuration. Therefore, the membrane is a crucial component for the system, since it has the role of providing a conductive medium between the electrodes. One of the challenges in CO 2 electrolysis is that water is consumed in the reaction. At high current density, this may cause the membrane's surface near the cathode to dry out, lowering efficiency or perhaps stopping the process entirely, since there is no longer a conductive medium. As a result, water management is critical for this process. In this work, we approach the drying-out challenge by studying the novel concept of a membrane with internal microchannels. These channels allow the circulation of water or an electrolyte inside the membrane, which reduces the water diffusion path and affects the membrane’s conductivity. The effects of channel geometry, location, and concentrations of electrolyte inside on water content, conductivity and overall performance are studied in a 2D COMSOL model. In addition, the effect of internal concentration of electrolyte on the membrane’s resistance, on the process performance and the K + cross-over to cathode side were investigated experimentally. Our modeling results prove that the presence of the channels can keep the membrane hydrated. The highest current densities are observed when the channel is closest to the cathode, and with smaller pores. Smaller pores are advantageous due to the trade-off between enhanced membrane conductivity and the lower conductivity of the liquid itself. If water is circulated in a large channel, it increases the membrane’s ionomer conductivity due to hydration but the overall conductivity is decreased since water is not highly conductive. Nonetheless, the results also show that a higher concentration of electrolyte inside the microchannels can significantly increase the total conductivity of the membrane, and therefore the energy efficiency of the process. These effects are most significant at higher current densities. In the experimental results, we’ve observed similar effects in terms of membrane conductivity and current density of the process – the higher the electrolyte concentration the higher the current density. Furthermore, a low concentration decreases the amount of potassium which crosses over to the cathode side, inhibiting salt deposition. We’ve concluded that a small channel, up to 90 µm wide, close to the pore with an electrolyte with a concentration of up to 10 mM could be very beneficial for the water management and energy efficiency of the process. This helps to keep the membrane hydrated at higher current densities, improves the conductivity of the membrane, and it doesn’t have significant impacts on the salt deposition.

Petrov, Kostadin Veselinov↗
DOE OSTI2026

AlphaZero Reimplementation with Zoning Game and Associated Materials [SWR-26-016]

Here, we present a de novo, extensible, modular, research-oriented, single-player reimplementation of the "AlphaZero" class of algorithms originally described in [1]. We also present a novel task called the Zoning Game, designed as a toy problem to test the applicability of various AlphaZero-based paradigms to infrastructure planning problems, along with several other games. We implement specializations of AlphaZero to play several games. We also include code that serves as a starting point to explore language generation with AlphaZero, as well as documentation and other related materials. [1] Silver, D., Schrittwieser, J., Simonyan, K., Antonoglou, I., Huang, A., Guez, A., Hubert, T., Baker, L., Lai, M., Bolton, A., Chen, Y., Lillicrap, T., Hui, F., Sifre, L., van den Driessche, G., Graepel, T., & Hassabis, D. (2017). Mastering the game of Go without human knowledge. Nature, 550(7676), 354–359. https://doi.org/10.1038/nature24270

Konar-Steenberg, Gabriel [National Laboratory of t↗
DOE OSTI2020

Antibacterial activity of iron oxide, iron nitride, and tobramycin conjugated nanoparticles against Pseudomonas aeruginosa biofilms

Novel methods are necessary to reduce morbidity and mortality of patients suffering from infections with Pseudomonas aeruginosa. Being the most common infectious species of the Pseudomonas genus, P. aeruginosa is the primary Gram-negative etiology responsible for nosocomial infections. Due to the ubiquity and high adaptability of this species, an effective universal treatment method for P. aeruginosa infection still eludes investigators, despite the extensive research in this area. Results We report bacterial inhibition by iron-oxide (nominally magnetite) nanoparticles (NPs) alone, having a mean hydrodynamic diameter of ~ 16 nm, as well as alginate-capped iron-oxide NPs. Alginate capping increased the average hydrodynamic diameter to ~ 230 nm. We also investigated alginate-capped iron-oxide NP-drug conjugates, with a practically unchanged hydrodynamic diameter of ~ 232 nm. Susceptibility and minimum inhibitory concentration (MIC) of the NPs, NP-tobramycin conjugates, and tobramycin alone were determined in the PAO1 bacterial colonies. Investigations into susceptibility using the disk diffusion method were done after 3 days of biofilm growth and after 60 days of growth. MIC of all compounds of interest was determined after 60-days of growth, to ensure thorough establishment of biofilm colonies. Conclusions Positive inhibition is reported for uncapped and alginate-capped iron-oxide NPs, and the corresponding MICs are presented. We report zero susceptibility to iron-oxide NPs capped with polyethylene glycol, suggesting that the capping agent plays a major role in enabling bactericidal ability in of the nanocomposite. Our findings suggest that the alginate-coated nanocomposites investigated in this study have the potential to overcome the bacterial biofilm barrier. Magnetic field application increases the action, likely via enhanced diffusion of the iron-oxide NPs and NP-drug conjugates through mucin and alginate barriers, which are characteristic of cystic-fibrosis respiratory infections. We demonstrate that iron-oxide NPs coated with alginate, as well as alginate-coated magnetite–tobramycin conjugates inhibit P. aeruginosa growth and biofilm formation in established colonies. We have also determined that susceptibility to tobramycin decreases for longer culture times. However, susceptibility to the iron-oxide NP compounds did not demonstrate any comparable decrease with increasing culture time. These findings imply that iron-oxide NPs are promising lower-cost alternatives to silver NPs in antibacterial coatings, solutions, and drugs, as well as other applications in which microbial abolition or infestation prevention is sought.

Biotechnology & Applied Microbiology↗
DOE OSTI2021

Confined hyperbolic metasurface modes for structured illumination microscopy

Plasmonic hyperbolic metasurfaces have emerged as an effective platform for manipulating the propagation of light. Here, confined modes on arrays of silver nanoridges that exhibit hyperbolic dispersion are used to demonstrate and model a super-resolution imaging technique based on structured illumination microscopy. A spatial resolution of ∼75 nm at 458 nm is demonstrated, which is 3.1 times better than an equivalent diffraction limited image. This work emphasizes the ability to engineer the properties of confined optical modes and to leverage those characteristics for applications in imaging. The results of this work could lead to improved approaches for super-resolution imaging using designed sub-wavelength structures.

42 ENGINEERING↗
DOE OSTI2023

Substrate-embedded metal meshes for ITO-free organic light emitting diodes

Organic light-emitting diodes (OLEDs) have great potential for use in large-area display and lighting applications, but their widespread adoption for large areas is hindered by the high cost and insufficient performance of indium tin oxide (ITO) anodes. In this study, we introduce an alternative anode material – a silver mesh embedded in glass – to facilitate production of large-area OLEDs. We present a facile, scalable manufacturing technique to create high aspect ratio micromeshes embedded in glass to provide the planar geometry needed for OLED layers. Our phosphorescent green OLEDs achieve a current efficiency of 51.4 cd/A at 1000 cd/m 2 and reach a slightly higher external quantum efficiency compared to a standard ITO/glass reference sample. Notably, these advancements are achieved without any impact on the viewing angle of the OLEDs. These findings represent a promising advancement towards ITO-free, high-efficiency OLEDs for various high performance, large-area applications, such as lighting and displays.

Optics↗
DOE OSTI2023

Highly luminescent ultra-thin films with rare earth for plasmonic applications

Amphiphilic complexes with luminescent rare earth metal ions suitable for Lanmuir-Blodgett (LB) deposition have been synthesized. LB monolayers with closely packed Eu complexes deposited directly on silver demonstrate significant far-field emission in contrast to the theoretical predictions of full quenching. Angular radiation and polarization patterns of the electric and magnetic dipole emission of Eu 3+ point to a high excitation efficiency of surface plasmon polaritons. Different luminescent behavior of closely packed emitters in comparison to diluted systems is tentatively attributed to the collective state of emitters in LB layers formed via near-field coupling with surface plasmons.

Munga, J.↗
DOE OSTI2020

Parametric study of optical transmission through plasmonic hole arrays modulated by the phase transition of vanadium dioxide

We have performed comprehensive electromagnetic simulations and preliminary experiments to explore the effects of geometrical and material parameters on the extraordinary optical transmission (EOT) through periodic arrays of subwavelength holes in a bilayer stack consisting of a gold or silver film atop a vanadium dioxide film (Au/Ag + VO 2 ), where the latter undergoes a semiconductor-to-metal phase transition. Using the finite-difference time-domain (FDTD) and finite-element methods (FEM), we vary iteratively the array periodicity, VO 2 film thickness and hole diameters, as well as the refractive index inside the VO 2 -layer holes and the VO 2 optical constants. For each variation, we compare the metallic-to-semiconducting ratios of the zero-order transmission ( T 00 ) peaks and find sharp maxima in these ratios within narrow parameter ranges. The maxima arise from Fabry-Perot and Fano-type resonances that minimize T 00 in the semiconducting phase of the perforated bilayers. At a fixed array period, the primary factors controlling the VO 2 -enabled EOT modulation are the VO 2 thickness, diameter of the VO 2 -layer holes, and absorption in the two VO 2 phases. Besides uncovering the origins of the higher metallic-phase T 00 , this study provides a protocol for optimizing the performance of the bilayer hole arrays for potential uses as dynamically tunable nano-optical devices.

Donev, Eugenii U. (ORCID:000000030555219X)↗
DOE OSTI2025

Ultrasonic deterrents provide no additional benefit over curtailment in reducing bat fatalities at an Ohio wind energy facility

Wind energy is important for achieving net-zero greenhouse gas emissions but also contributes to global bat mortality. Current strategies to minimize bat mortality due to collision with wind-turbine blades fall broadly into two categories: curtailment (limiting turbine operation during high-risk periods) and deterrence (discouraging bat activity near turbines). Recently, there has been interest in combining these strategies to achieve greater reductions in bat fatalities than either strategy might achieve in isolation. To investigate the effectiveness of combining curtailment with ultrasonic deterrent minimization strategies, we deployed six ultrasonic deterrents at nacelle height on 16 experimental turbines at Avangrid Renewables’ Blue Creek Wind Energy Facility. We rotated between four conditions (normal operations, curtailment only, deterrent only, curtailment and deterrent) randomly assigned to four wind turbines each night between 15 June and 3 October 2017. We found that bat mortality at wind turbines was independent of wind speed. The effectiveness of ultrasonic acoustic deterrents varied between high-frequency-calling species (eastern red bats) and low-frequency-calling species (hoary bats, silver-haired bats, and big brown bats). When deterrents were active, mortality was twice as high for eastern red bats compared to the control. Conversely, deterrents had a weak dampening effect on bat mortality for low-frequency species. We found no additive effects on mortality reduction for turbines operating both curtailment and deterrents compared to either approach in isolation. Our findings suggest that ultrasonic acoustic deterrents may not be effective for both high and low frequency echolocating bats. The increase in fatalities of eastern red bats is alarming and underscores the importance of considering site- and species-specific effects of minimization solutions.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2020

Surface plasmon polariton pulse shaping via two-dimensional Bragg grating pairs

Abstract We demonstrate control over the spatial and temporal properties of surface plasmon polaritons (SPPs) launched from nanohole arrays in silver. The arrays provide wave vector matching to allow the conversion of free-space photons into counter-propagating SPPs. SPPs launched from multiple arrays interfere at well-defined spatial positions, and the interference fringes form an all-SPP periodic nano-optical grating which evolves in space and time as the SPPs propagate. The spatio-temporal characteristics of the optical grating can be tuned through various nanohole array parameters such as tilt angle, separation, and array width. In addition, we examine multiperiodic arrays (MPAs) consisting of arrays with different pitches placed adjacent to one another. This platform allows the temporal interference of SPPs with different central wavelengths to be tailored through the MPA geometric and structural parameters. The temporal interference serves as an encoded signal, whereby the frequency components can be controlled by the array properties.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Zinc oxide (ZnO) hybrid metasurfaces exhibiting broadly tunable topological properties

Extreme light confinement observed in periodic photonic structures, such as the vortex singularities in momentum (k) space, has been associated with their topological nature. Consequently, by exploiting and tuning their topological properties, optical metasurfaces have been demonstrated as an attractive platform for active photonics. However, given the fact that most active media under external excitations can only provide limited refractive index change, the potential advancements offered by the topological character of active metasurfaces have remained mostly unexplored. Zinc oxide (ZnO), which has recently exhibited optically-induced extraordinarily large permittivity modulations at visible and near-infrared frequencies, is an excellent active material for dynamic metasurfaces exhibiting strong tuning. This work demonstrates that a hybrid metasurface consisting of an array of ZnO nanodisks on a silver backplane displays broadly tunable topological properties. In particular, by performing k-space scattering simulations using measured pump-fluence-dependent material properties of ZnO, we study in detail the light reflection from the hybrid metasurface. Our results validate that the large k-space topology tuning of the metasurface can result in enormously strong polarization manipulation of near-infrared light in the vicinity of the topological features. The observed polarization switching effect is highly sensitive to the polarization and wavelength of an incident wave, owing to the symmetry and dispersion characteristics of the proposed system. Our study indicates that leveraging a combination of the extraordinary material properties and the k-space topology, hybrid metasurfaces based on ZnO may open new avenues for creating all-optical switchable metadevices.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Anomalous dips in reflection spectra of optical polymers deposited on plasmonic metals

Abstract We have studied reflection spectra of dye-doped and undoped polymers deposited onto Ag and Au substrates and found anomalous dips in the UV spectral range. On top of Ag substrates, the λ ∼ 375 nm dips were observed in undoped PMMA, PVP, and PS polymers as well as PMMA doped with Rh590 and HITC laser dyes. In silver-based samples, the spectral positions of the observed reflection dips were close to singularities in the refractive indexes of surface plasmon polaritons (SPPs) propagating at the interface between Ag and polymer. The latter singularities can tentatively explain the λ ∼ 375 nm reflection dips, if the scattering of Ag and polymeric films is large enough to launch SPP without any prism or grating. The dips observed in reflection of Rh590:PMMA and HITC:PMMA on top of Au, were more pronounced than those on Ag, broader, shifted to shorter wavelengths, and their spectral positions had large standard deviations. Furthermore, no anomalous dips in gold-based samples were observed in the reflection spectra of undoped PMMA, PVP, and PS polymers, and a modest singularity in the SPP refractive index, predicted theoretically at λ ∼ 500 nm, cannot explain the dips in the UV reflection spectra observed experimentally. It appears likely that the origin of the reflection dips on top of Au substrates is different from that on top of Ag substrates.

36 MATERIALS SCIENCE↗
DOE OSTI2025

3D-printed mirror-less helicity preserving metasurface “mirror” for THz applications

Stimulated by seminal works on generalized reflection and refraction laws, metasurfaces have evolved to a highly promising research direction, as they allow a multitude of different functionalities by optically thin wave-control elements/structures. Among them, structures functioning in the low THz regime are of extensive research interest, due to their high potential in communication and sensing applications. In this paper we propose a simple THz metasurface design that exhibits ideally perfect cross-polarized reflection for linear polarization and perfect helicity-preserving reflection with a geometric (Pancharatnam–Berry) phase for circular polarization, without the presence of any back-reflector. Numerical calculations demonstrating the structure response are justified by analytical models, which provide physical insights on this response. The designed metasurfaces are fabricated using the direct laser writing 3D-printing technology, metallized with electroless silver plating, and are characterized by THz time domain spectroscopy, with the experimental results validating the corresponding theoretical ones. Applications including beam steering and focusing, exploring the Pancharatnam–Berry phase, are also demonstrated numerically. Besides those applications, the helicity preserving mirror response of our metasurfaces can be valuable, among others, also in molecular chirality sensing applications, an issue that is also highlighted here.

3D-printed metasurfaces↗
DOE OSTI2025

Generation of fast photoelectrons in strong-field emission from metal nanoparticles

We investigated the generation and control of fast photoelectrons (PEs) by exposing plasmonic nanoparticles (NPs) to short infrared (IR) laser pulses with peak intensities between 10 12 and 3 × 10 13 W/cm 2 . Our measured and numerically simulated PE momentum distributions demonstrate the extent to which PE yields and cutoff energies are controlled by the NP size, material, and laser peak intensity. For strong-field photoemission from spherical silver, gold, and platinum NPs with diameters between 10 and 100 nm our results confirm and surpass extremely high PEs cutoff energies, up to several hundred times the incident laser-pulse ponderomotive energy, found recently for gold nanospheres [Saydanzad et al., Nanophotonics 12, 1931 (2023)]. As reported previously for dielectric NPs [Rupp et al., J. Mod. Opt. 64, 995 (2017)], at higher intensities the cutoff energies we deduce from measured and simulated PE spectra tend to converge to a metal-independent limit. We expect these characteristics of light-induced electron emission from prototypical plasmonic metallic nanospheres to promote the understanding of the electronic dynamics in more complex plasmonic nanostructures and the design of nanoscale light-controlled plasmonic electron sources for photoelectronic devices of applied interest.

electron source↗
DOE OSTI2026

Sap Velocity Data for Urban Trees in Chicago, Illinois (2024-2025)

This dataset contains uncorrected sap velocity measurements using the heat ratio method (HRM) collected using ICT International SFM1x sensors at five urban sites in Chicago, Illinois, as part of the DOE CROCUS project. The data includes continuous monitoring of sap velocity from various tree species, including Maples (Acer spp.): Sugar Maple (Acer saccharum), Silver Maple (Acer saccharinum), and Red Maple (Acer rubrum); Oaks (Quercus spp.): Swamp White Oak (Quercus bicolor); American Elm (Ulmus americana); Honey Locust (Gleditsia triacanthos); Cottonwood (Populus deltoides); and Tree of Heaven (Ailanthus altissima) across Chicago State University (CSU), Northeastern Illinois University (NEIU), Northwestern University (NU), University of Illinois Chicago (UIC), and West Woodlawn "Blacks in Green" (BIG). These include both street trees and those in urban park locations. Measurements were collected at 15-20 minute intervals, depending on the sensor, and transmitted via Long Range Wide Area Network (LoRaWAN) protocols. The wireless data was collected by Sage Network (https://sagecontinuum.org/) nodes. The dataset includes sensor ID, Global Positioning System (GPS) coordinates, tree species (common and scientific names), tree identification number, diameter at breast height (DBH in cm), uncorrected sap velocity measurements (cm/hr) from both inner and outer probes, and Sage Node identifiers so the data can be mapped to related variables such as air quality and wind speed that were collected on the Sage nodes. All timestamps are in local Chicago time (CDT/CST). Quality control flags are provided using a 3-bit binary system indicating physical range violations (< -10 or > 60 cm/hr), step spikes (absolute difference > 36 cm/hr), and stuck sensor conditions (> 10 consecutive identical values). These are raw data, not corrected for wood anatomy or species-specific characteristics. Data is provided in comma separated (CSV) format. This dataset is part of a larger collection of CROCUS environmental monitoring data, including linked datasets from Air Quality Transmitter (AQT) sensors, Weather Transmitter (WXT) sensors, and Multi-Function Research LoRaWAN (MFR) Nodes. DOIs for the supporting data are provided as part of this data package.

Chicago↗
DOE OSTI2024

Plasmonic surface lattice resonances in nanoparticle arrays

This work reviews the literature and provides a detailed computational analysis of the optical properties of one- and two-dimensional arrays of silver and gold nanoparticles, with emphasis on surface lattice resonances (SLRs) that arise when localized plasmon resonances (LSPRs) in the nanoparticles couple to diffraction resonances that are determined by the interparticle spacing to give polariton modes in which the two types of excitations are coherently coupled. The computations are based on the coupled dipole approximation, which provides a nearly quantitative description of the extinction spectra for arrays of this type where the particles are well separated and not too large. The computations are used to determine many characteristics of SLRs associated with the lower polariton mode that is mostly photonic in nature, and we also study the upper polariton that is dominated by the LSPR response, as well as Rayleigh anomalies (RAs) that correspond to purely diffractive excitation. The calculations explore the sensitivity of these excitations to the directions of the incident wave and polarization vectors relative to the array axis, the effect of array spacing and number of particles in the array, and the effect of nanoparticle radius and background refractive indices. Details of the physical mechanisms involved in determining blue- and/or redshifts as structural parameters are varied is provided, with SLR’s being sensitive to far-field coupling, while LSPR’s can also be sensitive to near- and intermediatefield interactions that in some cases are similar to effects found in dye molecule aggregates.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2023

Life cycle cost assessment of material recovery from perovskite solar cells

Perovskite photovoltaic (PV) cells have created a significant interest over the last few years due to their low-cost and high-power conversion efficiencies. While perovskite PVs are still under development, we analyze cost of alternative sustainable end-of-life management for perovskite PV cells; this allows to reuse economically valuable materials and prevent environmental contamination. Here, we studied the life cycle cost assessment of recovering metals such as lead, aluminum, gold, nickel, and silver and other valuable materials such as glass from waste perovskite PVs. We also developed a recycling scheme to optimize the material recovery and determine the economically feasible ways to separate the cells layer-by-layer. Further, we assessed the cost and the net cost of the perovskite PV recycling processes. We found that the most feasible recycling technique’ cost is $\$$10.70 and its net cost is $\$$– 2.95 per 1 m 2 module. These values could be further improved by optimizing and reusing chemicals involved in process. These results indicate that the cost of perovskite PV recycling is economically feasible and there is potentional to gain benefit from sustainable end-of-life management of perovskite PVs.

14 SOLAR ENERGY↗