SEARCH · Engineering Papers

Results for “shock wave”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

All sources NASA NTRS DOE OSTI

NASA NTRS1978

Optical emission from a fast shock wave - The remnants of Tycho's supernova and SN 1006

The faint optical filaments in Tycho's supernova remnant appear to be emission from a shock front moving at 5600 km/s. The intensity of the hydrogen lines, the absence of forbidden lines of heavy elements in the spectrum, and the width of the filaments are explained by a model in which a collisionless shock wave is moving into partially neutral gas. The presence of the neutral gas can be used to set an upper limit of approximately 5 x 10 to the 47th power ergs to the energy in ionizing radiation emitted by a Type I supernova. The patchy neutral gas is probably part of the warm neutral component of the interstellar medium. The existing information on the remnant of SN 1006 indicates that its emission is similar in nature to that from Tycho's remnant.

Chevalier, R. A.↗

NASA NTRS1983

The structure and emission spectrum of a nonradiative shock wave in the Cygnus Loop

The ultraviolet spectrum of a Balmer-line filament located just outside the main body of optical filaments in the Cygnus Loop confirms the nonradiative shock wave theory for its origin. This theory is extended to include the hydrogen two-photon continuum, and the possibility of slow electron-ion equilibration in the postshock gas is considered. The shock velocity is inferred from the H-alpha profile. Comparison of model calculations with optical and ultraviolet spectra favors Coulomb equilibration behind a 170 km/s shock over models with rapid equilibration due to plasma turbulence. Elemental abundances in the preshock gas are found to be typical of diffuse interstellar clouds. The ram pressure behind the shock is higher than the pressures inferred for bright optical filaments. It is suggested that the bright optical filaments are regions of thermally unstable cooling behind shocks faster than the shock velocities inferred from their optical and ultraviolet spectra.

Raymond, J. C.↗

NASA NTRS1952

Study of the Pressure Rise Across Shock Waves Required to Separate Laminar and Turbulent Boundary Layers

Results are presented of a dimensional study and an experimental investigation of the pressure rise across a shock wave which causes separation of the boundary layer on a flat plate. The experimental part of the investigation was conducted at a Mach number of 3.03 for a Reynolds number range of 2 x 10 (sup) 6 to 19 x 10 (sup) 6. The available experimental data are compared with the predictions of the present study, and the significance of the results obtained is discussed relative to certain practical design problems.

FLOW, SUPERSONIC↗

NASA NTRS1974

Post-shock spikes - A new feature of proton and alpha enhancements associated with an interplanetary shock wave

Description of the salient characteristics of temporal variations of greater than or about equal to 100 keV/nucleon protons and alpha particles during a ten-hour period associated with the passage of an interplanetary shock wave. In addition to extending measurements to energies considerably below previous observations for energetic storm particle and shock-spike events, the discovery of a new low energy feature, referred to as 'postshock spikes', is reported. The typical width of these spikes is several minutes, but they occur several hours after the passage of the shock front. Evidence is presented that spikes depends on the energy per charge of the particles.

Gloeckler, G.↗

DOE OSTI2023

Shock-Wave Proprieties of High-Strength Ceramics

The shock and release response of a suite of high-strength ceramics has been investigated with controlled planar impact methods and velocity interferometry diagnostics. The study provides Hugoniot, yield and post-yield compressive strength, phase transformation and tensile spall material properties data for these ceramics.

36 MATERIALS SCIENCE↗

NASA NTRS1980

Interaction between a normal shock wave and a turbulent boundary layer at high transonic speeds. I - Pressure distribution

Asymptotic solutions are derived for the pressure distribution in the interaction of a weak normal shock wave with a turbulent boundary layer. The undisturbed boundary layer is characterized by the law of the wall and the law of the wake for compressible flow. In the limiting case considered, for 'high' transonic speeds, the sonic line is very close to the wall. Comparisons with experiment are shown, with corrections included for the effect of longitudinal wall curvature and for the boundary-layer displacement effect in a circular pipe.

Messiter, A. F.↗

NASA NTRS1984

Numerical solution for the interaction of shock wave with laminar boundary layer in two-dimensional flow on a flat plate

The finite difference computation method was investigated for solving problems of interaction between a shock wave and a laminar boundary layer, through solution of the complete Navier-Stokes equations. This method provided excellent solutions, was simple to perform and needed a relatively short solution time. A large number of runs for various flow conditions could be carried out from which the interaction characteristics and principal factors that influence interaction could be studied.

Landau, U.↗

NASA NTRS1987

Prediction of hypersonic shock-wave/turbulent-boundary-layer interaction flows

Solutions of the Reynolds-averaged Navier-Stokes equations are presented and compared with experimental surface data for a series of hypersonic shock-wave/turbulent-boundary-layer interaction flows. The turbulence models used include algebraic and two-equation eddy-viscosity models developed for transonic and supersonic flows. Also several additional modifications to the two-equation model to account for compressibility effects are developed and used. Although the modifications improve the agreement with the experimental data, no single model or modification correctly predicts all the test cases.

Horstman, C. C.↗

NASA NTRS1973

Turbulence measurements in a compressible boundary layer subjected to a shock-wave-induced adverse pressure gradient.

The rms intensities of fluctuating mass flux and total temperature and their correlation coefficients are given for the case of an adiabatic, Mach 4, axisymmetric shock-wave boundary-layer interaction. Data were obtained upstream, within, and downstream of the interaction by the use of constant temperature hot-wire anemometer. Turbulence spectra and quantitative behavior from oscilloscope traces are shown at selected locations. The measurements indicate that certain frequencies of the turbulence are increased as a result of the interaction and that the mass flux and total temperature fluctuations remain highly correlated over most of the boundary layer throughout the interaction. The present data are also transformed to rms intensities of fluctuating static temperature and velocity and compared with existing data obtained in adiabatic flows.

Rose, W. C.↗

NASA NTRS1995

Reduction of fluctuating pressure loads in shock wave turbulent boundary layer interactions

Fluctuating surface pressure measurements have been made to investigate the effectiveness of boundary layer separators (BLS's) in reducing the fluctuating pressure loads produced by separated shock wave turbulent boundary layer interactions. Measurements have been made under unswept and swept compression corner interactions in a Mach 5 flow. BLS's fix the separation location and eliminate the large-amplitude, low-frequency fluctuating pressure loads upstream of the compression corners. The loads on the unswept compression corner face are reduced by as much as 59%. The BLS's also shift the mean pressure distribution on the unswept corner face in the streamwise direction. Results show that the loads on the corner face vary with the BLS height and the distance between the BLS and the compression corner. Suggestions for the optimum placement and the use of the BLS's are also made.

Barter, John W.↗

NASA NTRS1998

Shock Wave Boundary Layer Interactions in High Mach Number Flows: A Critical Survey of Current Numerical Prediction Capabilities

The report assesses the capability for numerical simulation of 2-D and 3-D shock wave laminar and turbulent boundary layer interactions Three fundamental configurations are considered: single fin, double fin, and hollow cylinder flare. Thirteen separate cases were examined by a distinguished international group of researchers using the Reynolds-averaged Navier-Stokes (RANS) equations with a wide range of turbulence models from zero equation to full Reynolds Stress Equation formulations. The report presents an extensive comparison of computations and experimental data, summarizes the results, and makes recommendations for future research.

Doyle D. Knight↗

NASA NTRS1985

Simulation of Blunt-Fin-Induced Shock-Wave and Turbulent Boundary-Layer Interaction

The Reynolds-averaged Navier-Stokes equations are solved numerically for supersonic flow over a blunt fin mounted on a flat plate. The fin shock causes the boundary layer to separate. which results in a complicated, three-dimensional shock-wave and boundary-layer interaction. The computed results are in good agreement with the mean static pressure measured on the fin and the flat plate. The main features, such as peak pressure on the fin leading edge and a double peak on the plate. are predicted well. The role of the horseshoe vortex is discussed. This vortex leads to the development of high-speed flow and, hence, low-pressure regions on the fin and the plate. Different thicknesses of the incoming boundary layer have been studied. Varying the thicknesses by an order of magnitude shows that the size of the horseshoe vortex and, therefore, the spatial extent of the interaction are dominated by inviscid flow and only weakly dependent on the Reynolds number. Colored graphics are used to show details of the interaction flow field.

Hung, Ching-Mao↗

NASA NTRSDate not supplied

Fluid-Thermal-Structural Interactions Induced by an Asymmetric Shock-Wave/Boundary-Layer Interaction in a Mach-6 Compression Corner

An experimental study is conducted of the fluid-thermal-structural interaction of a clamped compliant panel exposed to a three dimensional shock-wave/boundary-layer interaction (SWBLI) induced by a Mach-6 compression ramp with a spanwise nonuniform incoming boundary layer. The nonuniform boundary layer was produced by placing trips on one side of the upstream flat plate, resulting in largely turbulent flow on the tripped side and transitional flow on the untripped side. Measurements of the flowfield confirmed that the tripped boundary layer contained elevated levels of unsteadiness, and the SWBLI was observed to vary from attached to fully separated as the ramp angle was increased from 10◦ to 38◦; the separation region on the tripped side of the panel was noticeably smaller, showing the elevated turbulence levels of the tripped-side flow to remain relatively localized rather than diffusing across the whole model. Full-field, time-resolved panel deformations were measured using high-speed photogrammetry and the vibrational response at each compression angle was characterized. Although the measured modes conformed largely to those from classical clamped-plate theory, some skewing of the mode shapes was observed. IR thermography highlighted regions of the compliant region where elevated temperatures were likely to promote thermal softening effects to the transient panel response. The quasi-static deformation and stress field was used to characterize the internal stress factor of each mode and showed a meaningful relationship between transient panel response and stress contained within each mode: modes with antinodes lying in high-stress areas of the plate tended to exhibit increases in vibrational frequency and decreases in vibrational power, whereas the opposite was true for modes with antinodes in low-stress areas.

Spectral Proper Orthogonal Decomposition↗

NASA NTRS1982

Fringe localization requirements for three-dimensional flow visualization of shock waves in diffuse-illumination double-pulse holographic interferometry

A theory of fringe localization in rapid-double-exposure, diffuse-illumination holographic interferometry was developed. The theory was then applied to compare holographic measurements with laser anemometer measurements of shock locations in a transonic axial-flow compressor rotor. The computed fringe localization error was found to agree well with the measured localization error. It is shown how the view orientation and the curvature and positional variation of the strength of a shock wave are used to determine the localization error and to minimize it. In particular, it is suggested that the view direction not deviate from tangency at the shock surface by more than 30 degrees.

Decker, A. J.↗

NASA NTRS1983

Measurements on a shock wave generated by a solar flare

It is shown that path-integrated radio-scattering measurements of the solar wind velocity yield higher estimates than those of point measurements. The post-shock speed is determined from radio scattering measurements by selection of the maximum of the radio-scattering deduced from the velocity-time curve, whereas velocity points on the rising edge of the shock underestimate the post-shock gas velocity, and therefore the shock speed. However, it is suggested that large uncertainties reside in using radio techniques for measurements of parameters of the shock wave, and the uncertainties may be large enough to encompass the lower velocity values calculated by a point method of measurement.

Woo, R.↗

NASA NTRS1986

The resolved layer of a collisionless, high beta, supercritical, quasi-perpendicular shock wave. I - Rankine-Hugoniot geometry, currents, and stationarity

Data collected by the ISEE dual-spacecraft mission (on November 7, 1977) on a slowly moving, supercritical, high-beta, quasi-perpendicular bow shock are presented, and the local geometry, spatial scales, and stationarity of this shock wave are assessed in a self-consistent Rankine-Hugoniot-constrained frame of reference. Included are spatial profiles of the ac and dc magnetic and electric fields, electron and proton fluid velocities, current densities, electron and proton number densities, temperatures, pressures, and partial densities of the reflected protons. The observed layer profile is shown to be nearly phase standing and one-dimensional in a Rankine-Hugoniot frame, empirically determined by the magnetofluid parameters outside the layer proper.

Scudder, J. D.↗

NASA NTRS1991

Hypersonic shock-wave turbulent-boundary-layer interaction flows - Experiment and computation

Solutions of the Reynolds-averaged Navier-Stokes equations are presented and compared with experimental surface data for a series of hypersonic shock-wave/turbulent-boundary-layer interaction flows. The turbulence models used include the standard k-epsilon two-equation eddy viscosity model, a two-layer modification to this model, and a third model with several modifications to account for compressibility effects. Both modified models gave significant improvements for all the test flows.

Horstman, C. C.↗

NASA NTRS1992

H-alpha images of the Cygnus Loop - A new look at shock-wave dynamics in an old supernova remnant

Attention is given to deep H-alpha images of portions of the east, west, and southwest limbs of the Cygnus Loop which illustrate several aspects of shock dynamics in a multiphase interstellar medium. An H-alpha image of the isolated eastern shocked cloud reveals cloud deformation and gas stripping along the cloud's edges, shock front diffraction and reflection around the rear of the cloud, and interior remnant emission due to upstream shock reflection. A faint Balmer-dominated filament is identified 30 arcmin further west of the remnant's bright line of western radiative filaments. This detection indicates a far more westerly intercloud shock front position than previously realized, and resolves the nature of the weak X-ray, optical, and nonthermal radio emission observed west of NGC 6960. Strongly curved Balmer-dominated filaments along the remnant's west and southwest edge may indicate shock diffraction caused by shock wave passage in between clouds.

Fesen, Robert A.↗