SEARCH · Engineering Papers

Results for “shape analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

All sources NASA NTRS DOE OSTI

NASA NTRS2008

Computational Fluid Dynamics Analysis Success Stories of X-Plane Design to Flight Test

Examples of the design and flight test of three true X-planes are described, particularly X-plane design techniques that relied heavily on computational fluid dynamics(CFD) analysis. Three examples are presented: the X-36 Tailless Fighter Agility Research Aircraft, the X-45A Unmanned Combat Air Vehicle, and the X-48B Blended Wing Body Demonstrator Aircraft. An overview is presented of the uses of CFD analysis, comparison and contrast with wind tunnel testing, and information derived from CFD analysis that directly related to successful flight test. Lessons learned on the proper and improper application of CFD analysis are presented. Highlights of the flight-test results of the three example X-planes are presented. This report discusses developing an aircraft shape from early concept and three-dimensional modeling through CFD analysis, wind tunnel testing, further refined CFD analysis, and, finally, flight. An overview of the areas in which CFD analysis does and does not perform well during this process is presented. How wind tunnel testing complements, calibrates, and verifies CFD analysis is discussed. Lessons learned revealing circumstances under which CFD analysis results can be misleading are given. Strengths and weaknesses of the various flow solvers, including panel methods, Euler, and Navier-Stokes techniques, are discussed.

Cosentino, Gary B.↗

NASA NTRS1981

Dynamic Analysis of Darrieus Vertical Axis Wind Turbine Rotors

The dynamic response characteristics of the vertical axis wind turbine (VAWT) rotor are important factors governing the safety and fatigue life of VAWT systems. The principal problems are the determination of critical rotor speeds (resonances) and the assessment of forced vibration response amplitudes. The solution to these problems is complicated by centrifugal and Coriolis effects which can have substantial influence on rotor resonant frequencies and mode shapes. The primary tools now in use for rotor analysis are described and discussed. These tools include a lumped spring mass model (VAWTDYN) and also finite-element based approaches. The accuracy and completeness of current capabilities are also discussed.

Lobitz, D. W.↗

NASA NTRS1975

Error analysis of penetrator impacts on bodies without atmospheres

Penetrators are missile shaped objects designed to implant electronic instrumentation in various of surface materials with a nominal impact speed around 150 m/sec. An interest in the application of this concept to in situ subsurface studies of extra terrestrial bodies and planetary satellites exists. Since many of these objects do not have atmospheres, the feasibility of successfully guiding penetrators to the required near-zero angle-of-attack impact conditions in the absence of an atmosphere was analyzed. Two potential targets were included, i.e., the moon and Mercury and several different penetrator deployment modes were involved. Impact errors arising from open-loop and closed-loop deployment control systems were given particular attention. Successful penetrator implacement requires: (1) that the impact speed be controlled, nominally to 150 m/sec, (2) that the angle of attack be in range 0 deg - 11 deg at impact, and (3) that the impact flight path angle be with 15 deg of vertical.

Davis, D. R.↗

NASA NTRS1975

Saturn's 3 nu 3 methane band - An analysis in terms of a scattering atmosphere

Using parameters recently measured in the laboratory, the shapes of manifolds belonging to the R-branch of Saturn's 3 nu 3 CH4 band were analyzed in terms of a homogeneous scattering model of Saturn's atmosphere, and the results were compared with those of an earlier analysis in terms of a reflecting-layer model. The resulting effective pressure is an order of magnitude smaller than for the reflecting-layer analysis, and the C/H ratio is an order of magnitude higher than the solar value. The overall fit of the theoretical profiles to the observed manifold shapes is distinctly worse, especially for R(7). Scattering evidently plays only a minor role in the formation of this band along Saturn's south-central meridian.

Trafton, L.↗

NASA NTRS2005

Analysis of SMA Hybrid Composite Structures in MSC.Nastran and ABAQUS

A thermoelastic constitutive model for shape memory alloy (SMA) actuators and SMA hybrid composite (SMAHC) structures was recently implemented in the commercial finite element codes MSC.Nastran and ABAQUS. The model may be easily implemented in any code that has the capability for analysis of laminated composite structures with temperature dependent material properties. The model is also relatively easy to use and requires input of only fundamental engineering properties. A brief description of the model is presented, followed by discussion of implementation and usage in the commercial codes. Results are presented from static and dynamic analysis of SMAHC beams of two types; a beam clamped at each end and a cantilever beam. Nonlinear static (post-buckling) and random response analyses are demonstrated for the first specimen. Static deflection (shape) control is demonstrated for the cantilever beam. Approaches for modeling SMAHC material systems with embedded SMA in ribbon and small round wire product forms are demonstrated and compared. The results from the commercial codes are compared to those from a research code as validation of the commercial implementations; excellent correlation is achieved in all cases.

Turner, Travis L.↗

NASA NTRS1991

The optimum shape for a rigid rotating shell enclosing an isotropic spherical planetary mass

Analysis of the Dyson Sphere, an extremely advanced civilization's hypothetical construct entirely surrounding a star, shows that new stress inward to the star increases to maxima at the poles if the sphere is rotating. This is because the centrifugal force in the rotating frame of reference vanishes at zero rotational radius, which occurs at the poles. There is less of the centrifugal force at high latitudes than low to offset the star's gravity. A form is derived for a thin, rigid, rotating shell, surrounding a large pointlike mass and/or charge, which will experience the least possible net stress at every point upon it - a shape on which every point not on the shell's equator is as near as possible to being in orbit. In orbit, whose plane passes through the primary body's center of mass or of charge, F(grav), or Fg, is exactly opposite in direction to F(centrif), or Fc, and is equal in amount. At all points not on the equator, Fc will not entirely offset Fg, because of Fg's vector decomposition. However, both forces are always constrained to be equal in absolute amount everywhere on the shell, equator included. The derived shape, given by the figure of revolution around the x-axis of x = square root (y-1-72), will prove useful in large-scale space construction. Also, various engineering problems are discussed.

Covington, Tatiana↗

NASA NTRS2017

Fixed Base Modal Survey of the MPCV Orion European Service Module Structural Test Article

Recently, the MPCV Orion European Service Module Structural Test Article (E-STA) underwent sine vibration testing using the multi-axis shaker system at NASA GRC Plum Brook Station Mechanical Vibration Facility (MVF). An innovative approach using measured constraint shapes at the interface of E-STA to the MVF allowed high-quality fixed base modal parameters of the E-STA to be extracted, which have been used to update the E-STA finite element model (FEM), without the need for a traditional fixed base modal survey. This innovative approach provided considerable program cost and test schedule savings. This paper documents this modal survey, which includes the modal pretest analysis sensor selection, the fixed base methodology using measured constraint shapes as virtual references and measured frequency response functions, and post-survey comparison between measured and analysis fixed base modal parameters.

modal testing↗

NASA NTRS1998

Potential and Limitations of the Modal Characterization of a Spacecraft Bus Structure by Means of Active Structure Elements

Theoretical and experimental studies have been performed to investigate the potential and limitations of the modal characterization of a typical spacecraft bus structure by means of active structure elements. The aim of these studies has been test and advance tools for performing an accurate on-orbit modal identification which may be characterized by the availability of a generally very limited test instrumentation, autonomous excitation capabilities by active structure elements and a zero-g environment. The NASA LARC CSI Evolutionary Testbed provided an excellent object for the experimental part of this study program. The main subjects of investigation were: (1) the selection of optimum excitation and measurement to unambiguously identify modes of interest; (2) the applicability of different types of excitation means with focus on active structure elements; and (3) the assessment of the modal identification potential of different types of excitation functions and modal analysis tools. Conventional as well as dedicated modal analysis tools were applied to determine modal parameters and mode shapes. The results will be presented and discussed based on orthogonality checks as well as on suitable indicators for the quality of the acquired modes with respect to modal purity. In particular, the suitability for modal analysis of the acquired frequency response functions as obtained by excitation with active structure elements will be demonstrated with the help of reciprocity checks. Finally, the results will be summarized in a procedure to perform an on-orbit modal identification, including an indication of limitation to be observed.

Grillenbeck, Anton M.↗

NASA NTRS1996

Shape Control of Solar Collectors Using Shape Memory Alloy Actuators

Solar collectors that are focused on a central receiver are designed with a mechanism for defocusing the collector or disabling it by turning it out of the path of the sun's rays. This is required to avoid damaging the receiver during periods of inoperability. In either of these two cases a fail-safe operation is very desirable where during power outages the collector passively goes to its defocused or deactivated state. This paper is principally concerned with focusing and defocusing the collector in a fail-safe manner using shape memory alloy actuators. Shape memory alloys are well suited to this application in that once calibrated the actuators can be operated in an on/off mode using a minimal amount of electric power. Also, in contrast to other smart materials that were investigated for this application, shape memory alloys are capable of providing enough stroke at the appropriate force levels to focus the collector. Design and analysis details presented, along with comparisons to test data taken from an actual prototype, demonstrate that the collector can be repeatedly focused and defocused within accuracies required by typical solar energy systems. In this paper the design, analysis and testing of a solar collector which is deformed into its desired shape by shape memory alloy actuators is presented. Computations indicate collector shapes much closer to spherical and with smaller focal lengths can be achieved by moving the actuators inward to a radius of approximately 6 inches. This would require actuators with considerably more stroke and some alternate SMA actuators are currently under consideration. Whatever SMA actuator is finally chosen for this application, repeatability and fatigue tests will be required to investigate the long term performance of the actuator.

Lobitz, D. W.↗

NASA NTRS1990

Inflection point caustic problems and solutions for high-gain dual-shaped reflectors

The singular nature of the uniform geometrical theory of diffraction (UTD) subreflector scattered field at the vicinity of the main reflector edge (for a high-gain antenna design) is investigated. It is shown that the singularity in the UTD edge-diffracted and slope-diffracted fields is due to the reflection distance parameter approaching infinity in the transition functions. While the geometrical optics (GO) and UTD edge-diffracted fields exhibit singularities of the same order, the edge slope-diffracted field singularity is more significant and is substantial for greater subreflector edge tapers. The diffraction analysis of such a subreflector in the vicinity of the main reflector edge has been carried out efficiently and accurately by a stationary phase evaluation of the phi-integral, whereas the theta-integral is carried out numerically. Computational results from UTD and physical optics (PO) analysis of a 34-m ground station dual-shaped reflector confirm the analytical formulations for both circularly symmetric and offset asymmetric subreflectors. It is concluded that the proposed PO(theta)GO(phi) technique can be used to study the spillover or noise temperature characteristics of a high-gain reflector antenna efficiently and accurately.

Galindo-Israel, Victor↗

NASA NTRS1973

Wheat classification exercise, using 11 June 1973, ERTS MSS data for Fayette County, Illinois (for CITARS task)

The prime emphasis was on classification of pixels in field centers, away from boundary effects. Results were encouraging in both training and test field centers for wheat and other major types of vegetation present. However, the location of fields was found to be a serious problem and it was even more difficult to select field-center pixels for fields of sizes less than 20 acres (or even larger, depending upon field shape) for use in the field-center analysis. The majority of fields in the segment are less than 20 acres in size. ERTS-1 data were received on 12 September 1973. Ground truth information and aerial photography were received on 9 and 15 September. The data were analyzed and processed digitally using the ERIM multispectral software system.

Malila, W. A.↗

NASA NTRS1974

An experimental-theoretical study of free vibrations of plates on elastic point supports

A theoretical and experimental study is made to investigate the effect on plate vibrations of varying the stiffness of corner elastic point supports. An experiment is conducted in which the bending stiffness of horizontal beams is used to support a square plate at its four corners. The stiffness of these supports can be varied over such a range that the plate fundamental frequency is lowered to 40% of the rigid support frequency. The variation with support stiffness of the frequencies of the first eight plate modes is measured and is compared with results from a theoretical model in which a Rayleigh-Ritz analysis is used which approximates the plate mode shapes as products of free-free beam modes. The elastic point supports are modeled both as massless translational springs and springs with tip masses, which are included to better represent the experimental supports.

Leuner, T. R.↗

NASA NTRS1976

Effect of probe configuration on radiative heating during Jovian entry

The radiative heating to the probe's surface and the effects of the recession of the heat shield caused by this heating are analyzed for five initial probe configurations for a Jovian entry. The initial configurations are spherically capped, conical bodies and hyperboloids. The results show that severe blunting of the nose region occurs for all configurations due to ablation of the heat shield caused by the large radiative heating rates. Recession at the nose region can possibly cause a concavity at the stagnation point. Furthermore, the recession of the heat shield, especially for the spherically capped, conical bodies, will be underpredicted if the change in the probe's shape during the entry is neglected in an analysis.

Sutton, K.↗

NASA NTRS1977

Analysis of radially cracked ring segments subject to forces and couples

Results of planar boundary collocation analysis are given for ring segment (C-shaped) specimens with radial cracks, subjected to combined forces and couples. Mode I stress intensity factors and crack mouth opening displacements were determined for ratios of outer to inner radius in the range 1.1 to 2.5 and ratios of crack length to segment width in the range 0.1 to 0.8.

Gross, B.↗

NASA NTRS1978

A theoretical study of the electronic transition moment for the C2 Swan band system

Large-scale self-consistent-field plus configuration-interaction calculations have been performed for the a 3Pi u and d 3Pi g states of C2. The theoretical potential curves are in good agreement with those found by a Klein-Dunham analysis of measured molecular constants in terms of shape and excitation energy. The sum of the squares of the theoretical transition moments between the states at 2.44 bohr is 4.12 a.u. which agrees with the results of shock tube measurements. The variation in the sum of the squares of the theoretical moments with internuclear separation agrees with the values of Danylewych and Nicholls (1974). Based on the data for C2 and mother molecules, it is suggested that CI calculations using near Hartree-Fock quality Slater basis sets produce highly reliable transition moments.

Arnold, J. O.↗

NASA NTRS1979

Engineering aspects of a thermal control subsystem for the 25 kW power module

The paper presents the key trade study results, analysis results, and the recommended thermal control approach for the 25 kW power module defined by NASA. Power conversion inefficiencies and component heat dissipation results in a minimum heat rejection requirement of 9 kW to maintain the power module equipment at desired temperature levels. Additionally, some cooling capacity should be provided for user payloads in the sortie and free-flying modes. The baseline thermal control subsystem includes a dual-loop-pumped Freon-21 coolant with the heat rejected from deployable existing orbiter radiators. Thermal analysis included an assessment of spacecraft orientations, radiator shapes and locations, and comparison of hybrid heat pipe and all liquid panels.

Schroeder, P. E.↗

NASA NTRS1980

Physicochemical and dynamical processes in cometary ionospheres. I - The basic flow profile

The paper deals with the basic aspects of solar wind interaction with the ionosphere of a large comet and with detailed hydrodynamic models developed to describe the flow exterior to the tangential discontinuity surface that separates the outflowing purely cometary ions from the inflowing contaminated solar wind. The equation of the basic flow model and the results of a preliminary analysis of these equations are given, and the shape and structure of the shock layer are analyzed. The shock layer structure associated with fan-shaped comet emanating from the cometary nucleus in the general direction to the sun is identified.

Houpis, H. L. F.↗

NASA NTRS1981

On the low-lying states of MgO. II

Using a double zeta plus polarization basis set of Slater orbitals, full valence MCSCF (FVMCSCF) calculations were performed for the low-lying states of MgO. For each state the FVMCSCF calculations were used to identify the important configurations which are then used in the MCSCF calculation and subsequently as references in a single and double excitation CI calculation. This approach is found to treat all states equivalently, with the maximum error in the computed transition energies and equilibrium bond lengths of 800/cm and approximately 0.03 A, respectively. The b 3 Sigma + state which has yet to be characterized experimentally is predicted to have a transition energy of approximately 8300/cm and a bond length of 1.79 A. A spectroscopic analysis of the potential curves indicates that their shapes are in quite reasonable agreement with the range of experimental results.

Bauschlicher, C. W., Jr.↗