Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “selected inversion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Quantitative determination of stratospheric aerosol characteristics

The author has identified the following significant results. The multiplicative scale factor needed to calibrate the recorded intensity is obtained by fitting the measured curve against a brightness model. The model was converted to the multispectral band scanner signal. Inversion of this measured signature is shown as the profile of attenuation coefficients versus altitude. Because of Gaussian noise, data were not measured directly. Data were fit with two exponential curves, one covering the lower altitude and the other covering the higher altitude. A twenty point curve was derived by selecting a data point and plotting its value from each of twenty adjacent scans. Noise from the lower altitudes was found to be erratic.

Tingey, D. L.↗

Machine Learning (ML) Classifier to Assist Metadata Creation

The Atmospheric Radiation Measurement (ARM) Data Center is responsible for the timely collection, archival, and curation of science data products. These products are freely available through an online data repository. Metadata creation is paramount for scientific users to find and access over seven petabytes of atmospheric science data. The hierarchical metadata structure allows users to search for information at both broad and narrow levels. This project aims to leverage 30 years’ worth of manually created metadata to enable machine predictions of broad-term classifications from narrow-term descriptions. These classification predictions would assist metadata coordinators with their term selections. This paper discusses the cleaning and preprocessing of the training data, the pipeline developed to determine the best model for this task, and the creation of an API metadata classifier for ARM measurement metadata. Our results show that the Linear Support Vector Classification (LinearSVC) algorithm, along with the Term Frequency – Inverse Document Frequency (TF-IDF) vectorizer, is well-suited for our multi-class classification task. Lengthier input training data led to better results, and artificial balancing was unnecessary for this particular use case. This predictive classifier enhances efficiency in metadata creation, as well as supports greater consistency and accuracy in metadata tagging.

Collier, Hannah [ORNL] (ORCID:0000000341284292)↗

SU-F-T-65: AutomaticTreatment Planning for High-Dose Rate (HDR) Brachytherapy with a VaginalCylinder Applicator

Purpose: High dose rate (HDR) brachytherapy treatment planning is conventionally performed in a manual fashion. Yet it is highly desirable to perform computerized automated planning to improve treatment planning efficiency, eliminate human errors, and reduce plan quality variation. The goal of this research is to develop an automatic treatment planning tool for HDR brachytherapy with a cylinder applicator for vaginal cancer. Methods: After inserting the cylinder applicator into the patient, a CT scan was acquired and was loaded to an in-house developed treatment planning software. The cylinder applicator was automatically segmented using image-processing techniques. CTV was generated based on user-specified treatment depth and length. Locations of relevant points (apex point, prescription point, and vaginal surface point), central applicator channel coordinates, and dwell positions were determined according to their geometric relations with the applicator. Dwell time was computed through an inverse optimization process. The planning information was written into DICOM-RT plan and structure files to transfer the automatically generated plan to a commercial treatment planning system for plan verification and delivery. Results: We have tested the system retrospectively in nine patients treated with vaginal cylinder applicator. These cases were selected with different treatment prescriptions, lengths, depths, and cylinder diameters to represent a large patient population. Our system was able to generate treatment plans for these cases with clinically acceptable quality. Computation time varied from 3–6 min. Conclusion: We have developed a system to perform automated treatment planning for HDR brachytherapy with a cylinder applicator. Such a novel system has greatly improved treatment planning efficiency and reduced plan quality variation. It also served as a testbed to demonstrate the feasibility of automatic HDR treatment planning for more complicated cases.

60 APPLIED LIFE SCIENCES↗

Creating Regional and Seasonal Climatologies of Marine and Dusty Marine Aerosol Lidar Ratios using MODIS AOD Constrained Retrievals and GOCART Model Simulations

The CALIPSO aerosol algorithms currently assign one lidar ratio (LR) value globally for each of the seven tropospheric aerosol types. In this study, MODIS total column aerosol optical depths (AODs) are used to constrain collocated CALIOP backscatter profiles in a Fernald inversion that infers aerosol LRs for CALIOP-classified marine and dusty marine aerosols. The GOCART aerosol model is leveraged to estimate the sea salt volume fractions (SSVFs) that are collocated with the CALIOP+MODIS LR retrievals. An inverse empirical relationship is found between the SSVFs and LRs (i.e., smaller SSVFs and larger LRs near coastlines, but the opposite in the remote oceans). This SSVF/LR relationship is applied to create regional and seasonal hybrid (i.e., retrieval & model-assisted) climatological LR maps so as to develop more robust LR selections for marine and dusty marine aerosols in the CALIPSO algorithms. These analyses also provide critical LR information for the next generation of spaceborne elastic backscatter lidars.

Travis D. Toth↗

Creating Regional and Seasonal Climatologies of Marine and Dusty Marine Aerosol Lidar Ratios using MODIS AOD Constrained Retrievals and GOCART Model Simulations

The CALIPSO aerosol algorithms currently assign one lidar ratio (LR) value globally for each of the seven tropospheric aerosol types. In this study, MODIS total column aerosol optical depths (AODs) are used to constrain collocated CALIOP backscatter profiles in a Fernald inversion that infers aerosol LRs for CALIOP-classified marine and dusty marine aerosols. The GOCART aerosol model is leveraged to estimate the sea salt volume fractions (SSVFs) that are collocated with the CALIOP+MODIS LR retrievals. An inverse empirical relationship is found between the SSVFs and LRs (i.e., smaller SSVFs and larger LRs near coastlines, but the opposite in the remote oceans). This SSVF/LR relationship is applied to create regional and seasonal hybrid (i.e., retrieval & model-assisted) climatological LR maps so as to develop more robust LR selections for marine and dusty marine aerosols in the CALIPSO algorithms. These analyses also provide critical LR information for the next generation of spaceborne elastic backscatter lidars.

Travis D. Toth↗

On the applicability of surrogate-based Markov chain Monte Carlo-Bayesian inversion to the Community Land Model: Case studies at flux tower sites: SURROGATE-BASED MCMC FOR CLM

The Community Land Model (CLM) has been widely used in climate and Earth system modeling. Accurate estimation of model parameters is needed for reliable model simulations and predictions under current and future conditions, respectively. In our previous work, a subset of hydrological parameters has been identified to have significant impact on surface energy fluxes at selected flux tower sites based on parameter screening and sensitivity analysis, which indicate that the parameters could potentially be estimated from surface flux observations at the towers. To date, such estimates do not exist. In this paper, we assess the feasibility of applying a Bayesian model calibration technique to estimate CLM parameters at selected flux tower sites under various site conditions. The parameters are estimated as a joint probability density function (PDF) that provides estimates of uncertainty of the parameters being inverted, conditional on climatologically-average latent heat fluxes derived from observations. We find that the simulated mean latent heat fluxes from CLM using the calibrated parameters are generally improved at all sites when compared to those obtained with CLM simulations using default parameter sets. Further, our calibration method also results in credibility bounds around the simulated mean fluxes which bracket the measured data. The modes (or maximum a posteriori values) and 95% credibility intervals of the site-specific posterior PDFs are tabulated as suggested parameter values for each site. Analysis of relationships between the posterior PDFs and site conditions suggests that the parameter values are likely correlated with the plant functional type, which needs to be confirmed in future studies by extending the approach to more sites.

Huang, Maoyi↗

Optimizing hierarchical membrane/catalyst systems for oxidative coupling of methane using additive manufacturing

The advantage of a membrane/catalyst system in oxidative coupling of methane (OCM) compared to conventional reactive systems is that by introducing oxygen to the OCM catalytic sites through a membrane, parasitic gas phase reactions of O 2 (g), responsible for lowering product selectivity, can be avoided. The design and fabrication of membrane/catalyst systems has, however, been hampered by low volumetric chemical conversion rates, high capital cost, and difficulties in codesigning membrane and catalyst properties to optimize the performance. We solve these issues by developing a dual-layer additive manufacturing process, based on phase inversion, to design, fabricate and optimize a hollow fiber membrane/catalyst system for OCM. We demonstrate the approach though a case study using BaCe 0.8 Gd 0.2 O 3-δ (BCG) as the basis of both the catalyst and separation layers. We show that by using the manufacturing approach we can codesign the membrane thickness and catalyst surface area so that the flux of oxygen transport through the membrane and methane activation rates in the catalyst layer match each other. Here, we demonstrate that this “rate matching” is critical for maximizing the performance, with the membrane/catalyst system significantly overperforming conventional reactor designs under identical conditions.

36 MATERIALS SCIENCE↗

Ligand modulation of the conformational dynamics of the A 2A adenosine receptor revealed by single-molecule fluorescence

G protein-coupled receptors (GPCRs) are the largest class of transmembrane proteins, making them an important target for therapeutics. Activation of these receptors is modulated by orthosteric ligands, which stabilize one or several states within a complex conformational ensemble. The intra- and inter-state dynamics, however, is not well documented. Here, we used single-molecule fluorescence to measure ligand-modulated conformational dynamics of the adenosine A 2A receptor (A 2A R) on nanosecond to millisecond timescales. Experiments were performed on detergent-purified A 2R in either the ligand-free (apo) state, or when bound to an inverse, partial or full agonist ligand. Single-molecule Förster resonance energy transfer (smFRET) was performed on detergent-solubilized A 2A R to resolve active and inactive states via the separation between transmembrane (TM) helices 4 and 6. The ligand-dependent changes of the smFRET distributions are consistent with conformational selection and with inter-state exchange lifetimes ≥ 3 ms. Local conformational dynamics around residue 229 6.31 on TM6 was measured using fluorescence correlation spectroscopy (FCS), which captures dynamic quenching due to photoinduced electron transfer (PET) between a covalently-attached dye and proximal aromatic residues. Global analysis of PET-FCS data revealed fast (150–350 ns), intermediate (50–60 μs) and slow (200–300 μs) conformational dynamics in A 2A R, with lifetimes and amplitudes modulated by ligands and a G-protein mimetic (mini-G s ). Most notably, the agonist binding and the coupling to mini-G s accelerates and increases the relative contribution of the sub-microsecond phase. Molecular dynamics simulations identified three tyrosine residues (Y112, Y288 7.53 , and Y290 7.55 ) as being responsible for the dynamic quenching observed by PET-FCS and revealed associated helical motions around residue 229 6.31 on TM6. As a result, this study provides a quantitative description of conformational dynamics in A 2A R and supports the idea that ligands bias not only GPCR conformations but also the dynamics within and between distinct conformational states of the receptor.

59 BASIC BIOLOGICAL SCIENCES↗

Nonadiabatic dynamics of O({sup 1}D) + N{sub 2}(X{sup 1}{Sigma}{sub g}{sup +}){yields}O({sup 3}P) + N{sub 2}(X{sup 1}{Sigma}{sub g}{sup +}) on three coupled potential surfaces: Symmetry, Coriolis, spin-orbit, and Renner-Teller effects

We present the spin-orbit (SO) and Renner-Teller (RT) quantum dynamics of the spin-forbidden quenching O({sup 1}D) + N{sub 2}(X{sup 1}{Sigma}{sub g}{sup +}){yields}O({sup 3}P) + N{sub 2}(X{sup 1}{Sigma}{sub g}{sup +}) on the N{sub 2}O X-tilde{sup 1}A{sup '}, a-tilde{sup 3}A', and b-tilde{sup 3}A{sup '} coupled PESs. We use the permutation-inversion symmetry, propagate coupled-channel (CC) real wavepackets, and compute initial-state-resolved probabilities and cross sections {sigma}{sub j0} for the ground vibrational and the first two rotational states of N{sub 2}, j{sub 0}= 0 and 1. Labeling symmetry angular states by j and K, we report selection rules for j and for the minimum K value associated with any electronic state, showing that a-tilde{sup 3}A' is uncoupled in the centrifugal-sudden (CS) approximation at j{sub 0}= 0. The dynamics is resonance-dominated, the probabilities are larger at low K, {sigma}{sub j0} decrease with the collision energy and increase with j{sub 0}, and the CS {sigma}{sub 0} is lower than the CC one. The nonadiabatic interactions play different roles on the quenching dynamics, because the X-tilde{sup 1}A{sup '}-b-tilde{sup 3}A{sup '} SO effects are those most important while the a-tilde{sup 3}A'-b-tilde{sup 3}A{sup '} RT ones are negligible.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interpreting radial correlation Doppler reflectometry using gyrokinetic simulations

A linear response, local model for the DBS amplitude applied to gyrokinetic simulations shows that radial correlation Doppler reflectometry measurements (RCDR, Schirmer et al 2007 Plasma Phys. Control. Fusion 49 1019) are not sensitive to the average turbulence radial correlation length, but to a correlation length that depends on the binormal wavenumber $k_{\perp}$ selected by the Doppler backscattering (DBS) signal. Nonlinear gyrokinetic simulations show that the turbulence naturally exhibits a nonseparable power law spectrum in wavenumber space, leading to a power law dependence of the radial correlation length with binormal wavenumber $l_r \sim C k_{\perp}^{-\alpha} (\alpha \approx 1)$ which agrees with the inverse proportionality relationship between the measured $l_r$ and $k_{\perp} $ observed in experiments (Fernández-Marina et al 2014 Nucl. Fusion 54 072001). This new insight indicates that RCDR characterizes the eddy aspect ratio in the perpendicular plane to the magnetic field. It also motivates future use of a nonseparable turbulent spectrum to quantitatively interpret RCDR and potentially other turbulence diagnostics. The radial correlation length is only measurable when the radial resolution at the cutoff location $W_\text n$ satisfies $W_\text n \ll l_r$, while the measurement becomes dominated by $W_\text n$ for $W_\text n \gg l_r$. This suggests that $l_r$ is likely to be inaccessible for electron-scale DBS measurements (${k_{\perp}}{\rho_{\text s}} \gt 1$). The effect of $W_\text n$ on ion-scale radial correlation lengths could be nonnegligible.

radial correlation Doppler reflectometry↗

SU-F-J-84: Comparison of Quantitative Deformable Image Registration Evaluation Tools: Application to Prostate IGART

Purpose: Errors in displacement vector fields (DVFs) generated by Deformable Image Registration (DIR) algorithms can give rise to significant uncertainties in contour propagation and dose accumulation in Image-Guided Adaptive Radiotherapy (IGART). The purpose of this work is to assess the accuracy of two DIR algorithms using a variety of quality metrics for prostate IGART. Methods: Pelvic CT images were selected from an anonymized database of nineteen prostate patients who underwent 8–12 serial scans during radiotherapy. Prostate, bladder, and rectum were contoured on 34 image-sets for three patients by the same physician. The planning CT was deformably-registered to daily CT using three variants of the Small deformation Inverse Consistent Linear Elastic (SICLE) algorithm: Grayscale-driven (G), Contour-driven (C, which utilizes segmented structures to drive DIR), combined (G+C); and also grayscale ITK demons (Gd). The accuracy of G, C, G+C SICLE and Gd registrations were evaluated using a new metric Edge Gradient Distance to Agreement (EGDTA) and other commonly-used metrics such as Pearson Correlation Coefficient (PCC), Dice Similarity Index (DSI) and Hausdorff Distance (HD). Results: C and G+C demonstrated much better performance at organ boundaries, revealing the lowest HD and highest DSI, in prostate, bladder and rectum. G+C demonstrated the lowest mean EGDTA (1.14 mm), which corresponds to highest registration quality, compared to G and C DVFs (1.16 and 2.34 mm). However, demons DIR showed the best overall performance, revealing lowest EGDTA (0.73 mm) and highest PCC (0.85). Conclusion: As expected, both C- and C+G SICLE more accurately reproduce manually-contoured target datasets than G-SICLE or Gd using HD and DSI metrics. In general, the Gd appears to have difficulty reproducing large daily position and shape changes in the rectum and bladder. However, Gd outperforms SICLE in terms of EGDTA and PCC metrics, possibly at the expense of topological quality of the estimated DVFs.

60 APPLIED LIFE SCIENCES↗

Epigenomics of Development in Populus

We conducted research to determine the role of epigenetic modifications during tree development using poplar (Populus trichocarpa), a model woody feedstock species. Using methylated DNA immunoprecipitation (MeDIP) or chromatin immunoprecipitation (ChIP), followed by high-throughput sequencing, we are analyzed DNA and histone methylation patterns in the P. trichocarpa genome in relation to four biological processes: bud dormancy and release, mature organ maintenance, in vitro organogenesis, and methylation suppression. Our project is now completed. We have 1) produced 22 transgenic events for a gene involved in DNA methylation suppression and studied its phenotypic consequences; 2) completed sequencing of methylated DNA from eleven target tissues in wildtype P. trichocarpa; 3) updated our customized poplar genome browser using the open-source software tools (2.13) and (V2.2) of the P. trichocarpa genome; 4) produced summary data for genome methylation in P. trichocarpa, including distribution of methylation across chromosomes and in and around genes; 5) employed bioinformatic and statistical methods to analyze differences in methylation patterns among tissue types; and 6) used bisulfite sequencing of selected target genes to confirm bioinformatics and sequencing results, and gain a higher-resolution view of methylation at selected genes 7) compared methylation patterns to expression using available microarray data. Our main findings of biological significance are the identification of extensive regions of the genome that display developmental variation in DNA methylation; highly distinctive gene-associated methylation profiles in reproductive tissues, particularly male catkins; a strong whole genome/all tissue inverse association of methylation at gene bodies and promoters with gene expression; a lack of evidence that tissue specificity of gene expression is associated with gene methylation; and evidence that genome methylation is a significant impediment to tissue dedifferentiation and redifferentiation in vitro.

59 BASIC BIOLOGICAL SCIENCES↗

The continuum spectral characteristics of gamma ray bursts observed by BATSE

Distributions of the continuum spectral characteristics of 260 bursts in the first Burst and Transient Source Experiment (BATSE) catalog are presented. The data are derived from flux ratios calculated from the BATSE Large Area Detector (LAD) four channel discriminator data. The data are converted from counts to photons using a direct spectral inversion technique to remove the effects of atmospheric scattering and the energy dependence of the detector angular response. Although there are intriguing clusterings of bursts in the spectral hardness ratio distributions, no evidence for the presence of distinct burst classes based on spectral hardness ratios alone is found. All subsets of bursts selected for their spectral characteristics in this analysis exhibit spatial distributions consistent with isotropy. The spectral diversity of the burst population appears to be caused largely by the highly variable nature of the burst production mechanisms themselves.

Pendleton, Geoffrey N.↗

The continuum spectral characteristics of gamma-ray bursts observed by BATSE

Distributions of the continuum spectral characteristics of 260 bursts in the first Burst And Transient Source Experiement (BATSE) catalog are presented. The data are derived from flux calculated from BATSE Large Area Detector (LAD) four-channel discriminator data. The data are converted from counts to protons using a direct spectral inversion technique to remove the effects of atmospheric scattering and the energy dependence of the detector angular response. Although there are intriguing clusters of bursts in the spectral hardness ratio distributions, no evidence for the presence of distinct burst classes based in spectral hardness ratios alone is found. All subsets of bursts selected for their spectral characteristics in this analysis exhibit spatial distributions consistent with isotropy. The spectral diversity of the burst population appears to be caused largely by the highly variable nature of the burst production mechanisms themselves.

Pendleton, Geoffrey N.↗

Reduction of satellite magnetic anomaly data

Analysis of global magnetic anomaly maps derived from satellite data is facilitated by inversion to the equivalent magnetization in a constant thickness magnetic crust or, equivalently, by reduction to the pole. Previous inversions have proven unstable near the geomagnetic equator. The instability results from magnetic moment distributions which are admissible in the inversion solution but which make only small contribution to the computed values of anomaly field. Their admissibility in the solution could result from noisy or incomplete data or from small poorly resolved anomalies. The resulting magnetic moments are unrealistically large and oscillatory. Application of the method of principal components (e.g. eigenvalue decomposition and selective elimination of less significant eigenvectors) is proposed as a way of overcoming the instability and the method is demonstrated by applying it to the region around the Bangui anomaly in Central Africa.

Slud, E. V.↗

A generic multibody simulation

Described is a dynamic simulation package which can be configured for orbital test scenarios involving multiple bodies. The rotational and translational state integration methods are selectable for each individual body and may be changed during a run if necessary. Characteristics of the bodies are determined by assigning components consisting of mass properties, forces, and moments, which are the outputs of user-defined environmental models. Generic model implementation is facilitated by a transformation processor which performs coordinate frame inversions. Transformations are defined in the initialization file as part of the simulation configuration. The simulation package includes an initialization processor, which consists of a command line preprocessor, a general purpose grammar, and a syntax scanner. These permit specifications of the bodies, their interrelationships, and their initial states in a format that is not dependent on a particular test scenario.

Hopping, K. A.↗

Efficient Method for Analyzing Hyperspectral Remote Sensing Data

The current and next generation satellite infrared sensors such as AIRS, IASI, CrIS, and CLARREO all have one thing in common: large number of spectral channels. In order to fully utilize the information content of these sensors, a large number of Radiative Transfer (RT) calculations through the inhomogeneous atmosphere are needed. It is also computationally intensive to invert atmospheric and surface properties using all the channels. Usually, only subsets of channels are used to perform physical inversions for atmospheric profiles. We will explore ways to speed up RT calculations and inversions and test the algorithms using data from the Infrared Atmospheric Sounding Interferometer (IASI) satellite instrument. We will describe a retrieval algorithm using a Principal Component-based Radiative Transfer Model (PCRTM) for generating atmospheric temperature/moisture/ozone profiles and surface properties. The retrieval algorithm performs both the radiative transfer calculations and inversions in the Principal Component (PC) domain. The inversion algorithm is based on a non-linear Levenberg- Marquardt method with climatology covariance matrices and a priori information as constraints. One advantage of this approach is that it uses all information content from the ultraspectral data so that the retrieval is less sensitive to instrument noise and eliminates the need for selecting a sub-set of the channels. We will also use data collected during the Joint Airborne IASI Validation Experiment (JAIVEx) field campaign to validate the algorithm and IASI retrievals.

Liu, Xu↗

Lambert’s Problem – A Geometric Approach

A fundamental problem in spacecraft mission design is to find a free flight path from one place to another in a chosen travel time. Lambert studied this problem for free flight in an inverse square central force field, and Lagrange produced a solution in 1778. Although this is an old problem, a new approach may be of some value. There are two steps to the new solution. First, find every ellipse with focus at the origin that intersects two circles both centered at the origin. Then select only those ellipses that have a specified angle between the intersection points of the ellipse with the inner and outer circles. Second, find the travel times between intersections for each ellipse. These are all the possible travel times from which one may choose. Standard solutions to Lambert’s problem can be found in references [1-4].

Easton, Robert↗