Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “rings”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Saturn's Plasma Density Depletions Along Magnetic Field Lines Connected to the Main Rings

We report on a set of clear and abrupt decreases in the high-frequency boundary of whistlerode emissions detected by Cassini at high latitudes (about ±40°) during the low-altitude proximal flybys f Saturn . These abrupt decreases or dropouts have start and stop locations that correspond to L shells at the dges of the A and B rings. Langmuir probe measurements can confirm, in some cases, that the abrupt decrease in the high-frequency whistler mode boundary is associated with a corresponding abrupt electron density dropout over evacuated field lines connected to the A and B rings. Wideband data also reveal electron plasma oscillations and whistler mode cutoffs consistent with a low-density plasma in the region. he observation of the electron density dropout along ring-connecting field lines suggests that strong ambipolar forces are operating, drawing cold ionospheric ions outward to fill the flux tubes. There is an analog with the refilling of flux tubes in the terrestrial plasmasphere. We suggest that the ring-connected electron density dropouts observed between 1.1 and 1.3 R(sub s) are connected to the low-density ring plasma cavity observed overtop the A and B rings during the 2004 Saturn orbital insertion pass.

Farrell, W. M.↗

Preparation for Cassini Grand Finale - Validation of Saturn Ring Heating in TSS

Thermal analysis of spacecraft at Saturn have previously been restricted to three environmental heat fluxes: solar, Saturn planet IR, and Saturn planet albedo. Heat flux from Saturn’s rings were not available in any commercially available thermal analysis tools. While preparing for the Cassini Grand Finale, during which Cassini will travel extremely close to the rings of Saturn, it was determined the existing thermal model required updating to accurately predict heat fluxes from the rings. This is particularly important for Cassini’s Visual and Infrared Mapping Spectrometer infrared spectrometer (VIMS-IR), as it is cooled by a passive radiator which operates below the temperature of Saturn’s rings. This paper discusses the validation of the heat flux from solar, Saturn, and Saturn’s rings in Spacedesign’s Thermal Synthesizer System (TSS). The incorporation of heating from Saturn’s rings also led to the use of SPICE geometry to ensure accurate spacecraft positioning and pointing. Thermal model results are compared against historical heating events as well as predictive Grand Finale sequences.

Swanson, Kirsten S.↗

An Update on the Storm Time O+ Ring Current Imaging Evolution (STORIE) Mission

The Storm Time O+ Ring Current Imaging Evolution (STORIE) mission launching in 2025 will provide continuous remote sensing of the ring current using Energetic Neutral Atoms (ENAs). The STORIE payload will be hosted on the International Space Station (ISS) where it will image the ring current ENA from the inside out. The mission will address compelling issues of ring current science including issues of buildup and decay, as well as the role of heavy ions. This presentation will overview the mission, and update the community on the current status. We will moreover discuss the science objectives, and elaborate on the advantages of ENA imaging from the unique vantage point of the ISS. We will then present the result of numerical models illustrating the expected ENA signal using coupled global MHD and ring current simulations during a geomagnetic event. Finally, we will discuss the initial approach to inverting the ENA signal to obtain the ring current ion flux.

Alex Glocer↗

Comparison of Ring Diagrams Based on the Doppler Shifts of Synthetic Data Obtained with Bisector Method and SDO/HMI Pipeline

Ring diagrams are cross-sections of three-dimensional spatiotemporal power spectra of solar oscillations. The rings reveal information about sub-surface flows and represent an important tool for helioseismology. Ring diagrams can be constructed using Doppler velocity or intensity maps of spectral lines. How the velocities are computed is an important factor for accuracy of information we can retrieve on subsurface flows. In our work, the ring diagrams are generated from Doppler shift data of synthesized Fe I 6173 Å line. We compare ring diagrams computed by two methods–HMI line-of-sight pipeline and the bisector of Fe line. Fe I line is synthesized for StellarBox 3D Radiative hydrodynamic simulations under LTE assumption. We aim to answer the following questions: 1.How do power spectra obtained from velocities computed with the HMI pipeline and bisector of the Fe I 6173Å compare? 2.How do the power spectral density retrieved with each method vary with heliocentric angle? 3.What is the effect of changing resolution on the power spectral density in ring diagrams obtained with the two methods?

SMD↗

A comprehensive understanding of the efficacy of N-Ring hardening methodologies in SiGe HBTs.

We investigate the efficacy of mitigating radiation-based single event effects (SEE) within circuits incorporating SiGe heterojunction bipolar transistors (HBTs) built with an N-Ring, a transistor-level layout-based radiation hardened by design (RHBD) technique. Previous work of single-device ion-beam induced charge collection (IBICC) studies has demonstrated significant reductions in peak collector charge collection and sensitive area for charge collection; however, few circuit studies using this technique have been performed. Transient studies performed with Sandia National Laboratory's (SNL) 36 MeV 16O microbeam on voltage references built with N-Ring SiGe HBTs have shown mixed results, with reductions in the number of large voltage disruptions in addition to new sensitive areas of low-level output voltage disturbances. Similar discrepancies between device-level IBICC results and circuit measurements are found for the case of digital shift registers implemented with N-Ring SiGe HBTs irradiated in a broadbeam environment at Texas A&M's Cyclotron Institute. The error cross-section curve of the N-Ring based register is found to be larger at larger ion LETs than the standard SiGe register, which is clearly counter-intuitive. We have worked to resolve the discrepancy between the measured circuit results and the device-level IBICC measurements, by re-measuring single-device N-Ring SiGe HBTs using a time-resolved ion beam induced charge (TRIBIC) set-up that allows direct capture of nodal transients. Coupling these measurements with full 3-D TCAD simulations provides complete insight into the origin of transient currents in an N-Ring SiGe HBT. The detailed structure of these transients and their bias dependencies are discussed, together with the ramifications for the design of space-borne analog and digital circuits using SiGe HBTs.

42 ENGINEERING↗

Asymmetric dipolar ring

A device having a dipolar ring surrounding an interior region that is disposed asymmetrically on the ring. The dipolar ring generates a toroidal moment switchable between at least two stable states by a homogeneous field applied to the dipolar ring in the plane of the ring. The ring may be made of ferroelectric or magnetic material. In the former case, the homogeneous field is an electric field and in the latter case, the homogeneous field is a magnetic field.

Prosandeev, Sergey A↗

Status of Studies of Achromat-based 6D Ionization Cooling Rings for Muons

Six dimensional ionization cooling of muons is needed to achieve the necessary luminosity for a muon collider. If that cooling could occur over multiple turns in a closed ring, there would be significant cost savings over a single-pass cooling channel. We report on the status of a cooling ring with achromatic arcs. The achromatic design permits the design to easily switch between a closed ring and a snaking geometry on injection or extraction from the ring. The ring is designed with sufficient space in each superperiod for injection and extraction magnets. We describe the ring's lattice design, performance, and injection/extraction requirements.

43 PARTICLE ACCELERATORS↗

Intra-Beam Scattering, Impedance, and Instabilities in Ultimate Storage Rings

We have investigated collective effects in an ultimate storage ring, i.e. one with diffraction limited emittances in both planes, using PEP-X as an example. In an ultimate ring intra-beam scattering (IBS) sets the limit of current that can be stored. In PEP-X, a 4.5 GeV ring running round beams at 200 mA in 3300 bunches, IBS doubles the emittances to 11.5 pm at the design current. The Touschek lifetime is 11 hours. Impedance driven collective effects tend not to be important since the beam current is relatively low. We have investigated collective effects in PEP-X, an ultimate storage ring, i.e. one with diffraction limited emittances (at one angstrom wavelength) in both planes. In an ultimate ring intra-beam scattering (IBS) sets the limit of current that can be stored. In PEP-X, IBS doubles the emittances to 11.5 pm at the design current of 200 mA, assuming round beams. The Touschek lifetime is quite large in PEP-X, 11.6 hours, and - near the operating point - increases with decreasing emittance. It is, however, a very sensitive function of momentum acceptance. In an ultimate ring like PEP-X impedance driven collective effects tend not to be important since the beam current is relatively low. Before ultimate PEP-X can be realized, the question of how to run a machine with round beams needs serious study. For example, in this report we assumed that the vertical emittance is coupling dominated. It may turn out that using vertical dispersion is a preferable way to generate round beams. The choice will affect IBS and the Touschek effect.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Cooling system for three hook ring segment

A triple hook ring segment including forward, midsection and aft mounting hooks for engagement with respective hangers formed on a ring segment carrier for supporting a ring segment panel, and defining a forward high pressure chamber and an aft low pressure chamber on opposing sides of the midsection mounting hook. An isolation plate is provided on the aft side of the midsection mounting hook to form an isolation chamber between the aft low pressure chamber and the ring segment panel. High pressure air is supplied to the forward chamber and flows to the isolation chamber through crossover passages in the midsection hook. The isolation chamber provides convection cooling air to an aft portion of the ring segment panel and enables a reduction of air pressure in the aft low pressure chamber to reduce leakage flow of cooling air from the ring segment.

42 ENGINEERING↗

Aging Behavior of the Viton® Fluoroelastomer O-Rings in the 9975 Shipping Package

The 9975 Type B shipping package is used within the DOE complex for shipping special nuclear materials. This package is re-certified annually in accordance with Safety Analysis Report requirements. The package is also used at the Savannah River Site as part of the long-term storage configuration of special nuclear materials. As such, the packages do not undergo annual recertification during storage, with uncertainty as to how long some of the package components will meet their functional requirements in the storage environment. The packages are currently approved for up to 15 years storage, and work continues to provide a technical basis to extend that period. This paper describes efforts by the Savannah River National Laboratory (SRNL) to extend the service life estimate of Viton® GLT and GLT-S fluoroelastomer O-rings used in the 9975 shipping package. O-rings of both compositions are undergoing accelerated aging at elevated temperature, and are periodically tested for compression stress relaxation (CSR) behavior and leak performance. The CSR behavior of O-rings was evaluated at temperatures from 79 °C to 177 °C. These collective data were used to develop predictive models for extrapolation of CSR behavior to relevant service temperatures (< 75 °C). O-rings were also aged in Primary Containment Vessel (PCV) fixtures at temperatures ranging from 79 °C to 232 °C. The fixtures are helium leak tested periodically to determine if they remain leak-tight. The PCV fixture tests demonstrate that the 9975 O-rings will remain leak-tight at temperatures up to 149 °C for 3 years or more, and no leak failures have been observed with up to 8 years aging at 93 °C. Significantly longer periods of leak-tight service are expected at the lower temperatures actually experienced in the storage environment. The predictive model developed from the CSR data conservatively indicates a service life of more than 20 years at the bounding temperature of 75 °C. Although the relationship between CSR behavior and leak-tight performance has not been established for this design, the CSR predictions for this O-ring are conservative relative to leak-tight performance to date.

36 MATERIALS SCIENCE↗

Capture, acceleration and bunching rf systems for the MEIC booster and storage rings

The Medium-energy Electron Ion Collider (MEIC), proposed by Jefferson Lab, consists of a series of accelerators. The electron collider ring accepts electrons from CEBAF at energies from 3 to 12 GeV. Protons and ions are delivered to a booster and captured in a long bunch before being ramped and transferred to the ion collider ring. The ion collider ring accelerates a small number of long ion bunches to colliding energy before they are re-bunched into a high frequency train of very short bunches for colliding. Two sets of low frequency RF systems are needed for the long ion bunch energy ramping in the booster and ion collider ring. Another two sets of high frequency RF cavities are needed for re-bunching in the ion collider ring and compensating synchrotron radiation energy loss in the electron collider ring. The requirements from energy ramping, ion beam bunching, electron beam energy compensation, collective effects, beam loading and feedback capability, RF power capability, etc. are presented. The preliminary designs of these RF systems are presented. Concepts for the baseline cavity and RF station configurations are described, as well as some options that may allow more flexible injection and acceleration schemes.

Wang, Shaoheng↗

Graphene Layer Growth Chemistry: Five-Six-Ring Flip Reaction

Reaction pathways are presented for hydrogen-mediated isomerization of a five and six member carbon ring complex on the zigzag edge of a graphene layer. A new reaction sequence that reverses orientation of the ring complex, or 'flips' it, was identified. Competition between the flip reaction and 'ring separation' was examined. Ring separation is the reverse of the five and six member ring complex formation reaction, previously reported as 'ring collision'. The elementary steps of the pathways were analyzed using density-functional theory (DFT). Rate coefficients were obtained by solution of the energy master equation and classical transition state theory utilizing the DFT energies, frequencies, and geometries. The results indicate that the flip reaction pathway dominates the separation reaction and should be competitive with other pathways important to the graphene zigzag edge growth in high temperature environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Recent Progress at the Photon Factory Storage Ring

The present status of the Photon Factory storage ring (PF ring) at High Energy Accelerator Research Organization (KEK), including recent progress for the machine developments, is reported. Due to the establishment of the simultaneous injection to the three rings (PF, HER, LER) from the KEK injector linac since April 2009, the PF ring currently operates almost all the time in a top-up mode available to users at a stored current of 450 mA in multi-bunch mode, and at a stored current of 51 mA in single-bunch mode, except the time while the KEK linac injection to the PF-AR twice daily. The third in-vacuum short gap undulator was installed at PF ring in September 2009.

43 PARTICLE ACCELERATORS↗

Combined Structural and Compositional Evolution of Planetary Rings Due to Micrometeoroid Impacts and Ballistic Transport

We introduce improved numerical techniques for simulating the structural and compositional evolution of planetary rings due to micrometeoroid bombardment and subsequent ballistic transport of impact ejecta. Our current, robust code is capable of modeling structural changes and pollution transport simultaneously over long times on both local and global scales. In this paper, we describe the methodology based on the original structural code of Durisen et al. (1989, Icarus 80, 136-166) and on the pollution transport code of Cuzzi and Estrada (1998, Icarus 132, 1-35). We provide demonstrative simulations to compare with, and extend upon previous work, as well as examples of how ballistic transport can maintain the observed structure in Saturn's rings using available Cassini occultation optical depth data. In particular, we explicitly verify the claim that the inner B (and presumably A) ring edge can be maintained over long periods of time due to an ejecta distribution that is heavily biased in the prograde direction through a balance between the sharpening effects of ballistic transport and the broadening effects of viscosity. We also see that a "ramp"-like feature forms over time just inside that edge. However, it does not remain linear for the duration of the runs presented here unless a less steep ejecta velocity distribution is adopted. We also model the C ring plateaus and find that their outer edges can be maintained at their observed sharpness for long periods due to ballistic transport. We hypothesize that the addition of a significant component of a retrograde-biased ejecta distribution may help explain the linearity of the ramp and is probably essential for maintaining the sharpness of C ring plateau inner edges. This component would arise for the subset of micrometeoroid impacts which are destructive rather than merely cratering. Such a distribution will be introduced in future work.

Cassini↗

Excitation of O + Band EMIC Waves Through H + Ring Velocity Distributions: Van Allen Probe Observations

A typical case of electromagnetic ion cyclotron (EMIC) emissions with both He + band and O + band waves was observed by Van Allen Probe A on 14 July 2014. These emissions occurred in the morning sector on the equator inside the plasmasphere, in which region O + band EMIC waves prefer to appear. Through property analysis of these emissions, it is found that the He + band EMIC waves are linearly polarized and propagating quasi–parallelly along the background magnetic field, while the O + band ones are of linear and left–hand polarization and propagating obliquely with respect to the background magnetic field. Using the in situ observations of plasma environment and particle data, excitation of these O + band EMIC waves has been investigated with the linear growth theory. The calculated linear growth rate shows that these O + band EMIC waves can be locally excited by ring current protons with ring velocity distributions. The comparison of the observed wave spectral intensity and the calculated growth rate suggests that the density of H + rings providing the free energy for the instability has decreased after the wave grows. Furthermore, this paper provides a direct observational evidence to the excitation mechanism of O + band EMIC waves: ring current protons with ring distributions provide the free energy supporting the instability in the presence of rich O + in the plasmasphere.

79 ASTRONOMY AND ASTROPHYSICS↗

Experimental Investigation of Natural Convection Heat Transfer in Heated Vertical Tubes with Discrete Rings

Natural convection heat transfer from heated vertical pipes has been investigated experimentally. The pipes are open-ended and circular in cross section. The test sections are electrically heated imposing the circumferentially and axially constant wall heat flux. The outer surface of the test section is insulated and heat is allowed to dissipate from the internal surface. Experiments are carried out for four different channels of 45 mm internal diameter and 3.8 mm thickness with length varying from 450 mm to 850 mm. Ratios of length to diameter of the channel are taken as L/D = 10, 12.22, 15.56, and 18.89. Wall heat fluxes are maintained at q{sup //} = 250 to 3341 W/m{sup 2}. Experiments are also carried out on intensified tubes of the same geometrical sizes with the discrete rings of rectangular cross section provided on the internal surface. Thickness of the rings are taken as t = 4, 6 and 8 mm; step size (s) of the rings are varying from 75 mm to 283.3 mm and the other ratios are taken as s/D = 1.67 to 6.29, t/D = 0.088 to 0.178 and s / t = 9.38 to 70.82. The effects of L/D ratio, ring thickness, ring spacing and wall heating conditions on local steady-state heat transfer phenomena are studied. A correlation is developed for average Nusselt number and modified Rayleigh number and another correlation is also developed for modified Rayleigh number and modified Reynolds number. These correlations predict the data accurately within ±10% error.

42 ENGINEERING↗

Particle–hole ring diagrams for fermions in two dimensions

The set of particle–hole ring diagrams for a many-fermion system in two dimensions is studied. The complex-valued polarization function is derived in detail and shown to be expressible in terms of square-root functions. For a contact-interaction the perturbative contributions to the energy per particle Ē(k{sub f}) are calculated in a closed analytical form from third up to twelfth order. The resummation of the particle–hole ring diagrams to all orders is studied and a pronounced dependence on the dimensionless coupling parameter α is found. There is a substantial difference between the complete ring-sum with all exchange-type diagrams included and the standard resummation of the leading n-ring diagrams only. The spin factor S{sub n}(g) associated to the nth order ring diagrams is derived for arbitrary spin-degeneracy g.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Advanced storage ring lattice options based on hybrid six-bend achromat for Stanford Synchrotron Radiation Lightsource upgrade

Three storage ring lattices have been designed as options for a future upgrade of the Stanford synchrotron radiation lightsource (SSRL). The three options differ in circumference and targeted future site, with one to be built in the tunnel of the present SPEAR3 ring, one as a green field ring on the SLAC campus, and the third in the tunnel of the decommissioned PEP-II ring. The lattices are based on the newly proposed hybrid 6-bend achromat (H6BA) lattice cells, which is ideal for pushing the photon beam brightness while achieving excellent nonlinear dynamics performance. The transparent matching conditions are enforced to minimize the negative impact of the loss of periodicity due to insertion of various long straight sections. Numerical optimization is performed to further improve the nonlinear dynamics. Finally, in addition to reaching very low emittances, the lattices can accommodate traditional off-axis injection and achieve beam lifetimes similar to or exceeding that of typical third generation rings.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗