SEARCH · Engineering Papers

Results for “reflectivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

All sources NASA NTRS DOE OSTI

NASA NTRS1980

Ganymede, Europa, Callisto, and Saturn's rings - Compositional analysis from reflectance spectroscopy

The reflectance spectra of Ganymede, Europa, Callisto, and the rings of Saturn are analyzed, using laboratory reflectance studies of water, frost, ice, and mineral mixtures. It is found that the spectra of the icy Galilean satellites are characteristic of water ice, or frost on ice, rather than pure water frost; and that the decrease in reflectance at visible wavelengths is caused by other mineral grains on the surface. The spectra of Saturn's rings are more characteristic of water frost, with other mineral grains mixed in the frost but not on the surface. It is also found that impurities of all these objects are not in isolated patches, but intimately mixed with the water. A new absorption feature at 1.15 microns has been identified in Ganymede, Callisto, and possibly Europa, which cannot be seen in Saturn's rings and whose cause is unknown.

Clark, R. N.↗

NASA NTRS1980

Sunlight reflections from a solar power satellite on solar mirrors should not harm the eyes

The potential hazard imposed by the reflection of the Sun's image by the solar power satellite (SPS) was examined. In the worst case, where the transmitter is assumed to be a perfect mirror reflecting the Sun's image normal to the atmosphere, the total energy received by the eye would be 3.36 x 10 to the -7th power watts. The eye's optics would blur the 5.6 sec of art image of the transmitter over a disk approximately 6 minutes arc in diameter, reducing the maximum intensity at the retina by 99%. A given cone in the retina would receive even less energy due to the constant random microtremors and microsaccadic movements of the eye muscles which move the retina over an area some 8 minutes of arc in radius, even during steady fixation. Therefore, very conservative estimates show that the reflections from the transmitter could be viewed safety for at least 3.2 hours and that the entire SPS structure could be viewed for a minimum of 1 hour. The solares mirror is briefly considered and is shown to be safe to view for at least 2.4 minutes.

Hyson, M. T.↗

NASA NTRS1981

Diurnal changes in reflectance factor due to Sun-row direction interactions

Over a two year period, data were collected regarding the canopies of soybeans grown in rows in planter boxes placed on a turntable in an effort to investigate changes in the spectral reflectance factor related to row direction, Sun direction, soil background, and crop development stage. Results demonstrate that the direction of rows in a soybean canopy can affect the reflectance factor of the canopy by as much as 230%. The results for the red spectral region tend to support the validity of canopy reflectance models; results for the infrared region do not.

Bauer, M. E.↗

NASA NTRS1981

Far-UV, visible, and near-IR reflectance spectra of frosts of H2O, CO2, NH3 and SO2

Measurements in the 0.1-2.5 micron range are presented for the reflectance spectra of the frosts of several volatiles pertinent to the study of comet nuclei. The frost spectra have distinctive features permitting their identification by spectroscopic reflectance remote sensing, notably in the far UV. It is found that: (1) H2O has a minimum at 0.16 microns and a maximum at 0.13 microns; (2) CO2 has minima near 0.21, 0.18 and 0.125 microns, with maxima at 0.19, 0.135 and 0.120 microns; (3) NH3 is bright at wavelengths longer than 0.21 microns, where reflectance drops to a value of only a few per cent at shorter wavelengths; (4) SO2 has a sharp drop at 0.32 microns, with a minimum at 0.18 microns and a maximum at 0.13 microns. The features in the frost spectra largely correspond to absorption line bands in the gas phase.

Hapke, B.↗

NASA NTRS1981

Spectral reflectance of hydrophytes

Identification of hydrophytes will improve the delineation and classification of wetlands on remotely sensed imagery. Spectral reflectance measurements of 10 species of hydrophytes were made with an Exotech radiometer during three phenological stages, flowering and early seed, senescent, and early emergent. Reflectance data were analyzed to determine significant (P not greater than 0.5) differences between species in each of four spectral regions during each phenological stage. Eight species had significantly (P not greater than 0.05) different reflectances during the flower and early seed stage. Among the ten species only one could not be spectrally isolated during at least 1 phenological stage. The results indicate that films sensitive to both visible and infrared spectra (e.g., Ektachrome infrared) should enable recognition of different species of hydrophytes.

Best, R. G.↗

NASA NTRS1984

Decoupling a Reflecting Layer From Its Support Structure

Mounting decouples thermal distortions of reflective surface so not transmitted to support structure. Reflecting layer consists of aluminum reflecting tiles attached to support structure by flexural mounting bend and twist to accommodate thermal expansion of tiles. Technique useful in microwave-antenna reflectors.

Bamford, R. M.↗

NASA NTRS1982

Comparison of LANDSAT-2 and field spectrometer reflectance signatures of south Texas rangeland plant communities

The accuracy was assessed for an atmospheric correction method that depends on clear water bodies to infer solar and atmospheric parameters for radiative transfer equations by measuring the reflectance signature of four prominent south Texas rangeland plants with the LANDSAT satellite multispectral scanner (MSS) and a ground based spectroradiometer. The rangeland plant reflectances produced by the two sensors were correlated with no significant deviation of the slope from unity or of the intercept from zero. These results indicated that the atmospheric correction produced LANDSAT MSS estimates of rangeland plant reflectances that are as accurate as the ground based spectroradiometer.

Richardson, A. J.↗

NASA NTRS1982

A review of crop canopy reflectance models

Various models for calculating crop canopy reflectance, in the visible and infrared wavelengths, from the optical and geometrical properties of a canopy and its constituents are reviewed. The radiative transfer equation is discussed as well as both analytical and numerical crop reflectance models which are manifestations of the solution of this equation. Recommendations are made for further work in modeling of canopy reflectance.

Goel, N. S.↗

NASA NTRS1982

New advances in the partial-reflection-drifts experiment using microprocessors

Improvements to the partial reflection drifts experiment are completed. The results of the improvements include real time processing and simultaneous measurements of the D region with coherent scatter. Preliminary results indicate a positive correlation between drift velocities calculated by both methods during a two day interval. The possibility now exists for extended observations between partial reflection and coherent scatter. In addition, preliminary measurements could be performed between partial reflection and meteor radar to complete a comparison of methods used to determine velocities in the D region.

Ruggerio, R. L.↗

NASA NTRS1983

Snow reflectance from thematic mapper

Calculations of snow reflectance in all 6 TM reflective bands (i.e., 1,2,3,4,5, and 7) using a delta Eddington model show that snow reflectance in bands 4,5, and 7 is sensitive to grain size. Efforts to interpret the surface optical grain size for the spectral extension of albedo are described. Results show the TM data include spectral channels suitable for snow/cloud discrimination and for snow albedo measurements that can be extended throughout the solar spectrum. Except for band 1, the dynamic range is large enough that saturation occurs only occasionally. The finer resolution gives much better detail on the snowcovered area and might make it possible to use textural information instead of the snowline as an index to the amount of snow melt runoff.

Dozier, J.↗

NASA NTRS1982

Evidence for specularly reflected ions upstream from the quasi-parallel bow shock

Ion velocity distributions in the form of bunches of gyrating particles traveling along helical paths have been observed moving sunward immediately upstream from quasi-parallel parts of the earth's bow shock using Los Alamos/Garching instruments on ISEE-1 and -2. These distributions have characteristics which indicate that they are produced by the nearly specular reflection at the shock of a portion of the incident solar wind ions. In particular, the guiding center motion and the gyrospeeds of the gyrating ions are quantitatively consistent with simple geometrical considerations for specular reflection. These considerations reveal that specularly reflected ions can escape upstream when the angle between the upstream magnetic field and the local shock normal is less than 45 deg but not when the angle is greater than 45 deg. These upstream gyrating ions are an important signature of one of the processes by which solar wind streaming energy is dissipated into other forms of energy at the shock.

Gosling, J. T.↗

NASA NTRS1984

Reflectance Modeling

A classical description of the one dimensional radiative transfer treatment of vegetation canopies was completed and the results were tested against measured prairie (blue grama) and agricultural canopies (soybean). Phase functions are calculated in terms of directly measurable biophysical characteristics of the canopy medium. While the phase functions tend to exhibit backscattering anisotropy, their exact behavior is somewhat more complex and wavelength dependent. A Monte Carlo model was developed that treats soil surfaces with large periodic variations in three dimensions. A photon-ray tracing technology is used. Currently, the rough soil surface is described by analytic functions and appropriate geometric calculations performed. A bidirectional reflectance distribution function is calculated and, hence, available for other atmospheric or canopy reflectance models as a lower boundary condition. This technique is used together with an adding model to calculate several cases where Lambertian leaves possessing anisotropic leaf angle distributions yield non-Lambertian reflectance; similar behavior is exhibited for simulated soil surfaces.

Smith, J. A.↗

NASA NTRS1984

Bidirectional Reflectance Modeling of Non-homogeneous Plant Canopies

Efforts to develop a three dimensional model to predict canopy, bidirectional reflectance for heterogenous plant stands using incident radiation and canopy structural descriptions as inputs are described. Utility programs were developed to cope with the complex output from the 3 dimensional model. In addition an attempt was made to define leaf and soil properties, which are appropriate to the mode, by measuring leaf and soil bidirectional reflectance distribution functions; since almost no data exist on these distributions. In the process it was realized that most models probably are using the wrong leaf spectral properties, and that off-nadir reflectance measurements are difficult to make because of non-Lambertian properties of reference surfaces. Also, in the visible wavebands, rough soil may not be distinguishable from canopies when viewed from above.

Norman, J. M.↗

NASA NTRS1984

Analysis of the effect on combustor noise measurements of acoustic waves reflected by the turbine and combustor inlet

Spectral analyses of static pressure fluctuations measured in turbine engine combustors at low engine speed show good agreement with theory. At idle speed the high pressure turbine is unchoked. Above idle speed the turbine chokes and a significant change in the shape of the measured combustor pressure spectrum is observed. A simplified theoretical model of the acoustic pressure generated in the combustor due to the turbulence-flame front interaction did not account for acoustic waves reflected from the turbine. By retaining this simplified combustion noise source model and adding a partial reflecting plane at the turbine and combustor inlet, a simple theoretical model was developed that reproduces the undulations in the combustor fluctuating pressure spectra. Plots of the theoretical combustor fluctuating pressure spectra are compared to the measured pressure spectra obtained from the CF6-50 turbofan engine over a range of engine operating speeds. The simplified combustion noise theory when modified by a simple turbine reflecting plane adequately accounts for the changes in measured combustor pressure spectra. It is further concluded that the shape of the pressure spectra downstream of the turbine, neglecting noise generated by the turbine itself, will be the combustion noise spectra unchanged except for the level reduction due to the energy blocked by the turbine.

Huff, R. G.↗

NASA NTRS1984

The role of the reflection coefficient in precision measurement of ultrasonic attenuation

Ultrasonic attenuation measurements using contact, pulse-echo techniques are sensitive to surface roughness and couplant thickness variations. This can reduce considerable inaccuracies in the measurement of the attenuation coefficient for broadband pulses. Inaccuracies arise from variations in the reflection coefficient at the buffer-couplant-sample interface. The reflection coefficient is examined as a function of the surface roughness and corresponding couplant thickness variations. Interrelations with ultrasonic frequency are illustrated. Reliable attenuation measurements are obtained only when the frequency dependence of the reflection coefficient is incorporated in signal analysis. Data are given for nickel 200 samples and a silicon nitride ceramic bar having surface roughness variations in the 0.3 to 3.0 microns range for signal bandwidths in the 50 to 100 MHz range.

Generazio, E. R.↗

NASA NTRS1984

Spectral characterization of biophysical characteristics in a boreal forest: Relationship between Thematic Mapper band reflectance and leaf area index for Aspen

Results from analysis of a data set of simultaneous measurements of Thematic Mapper band reflectance and leaf area index are presented. The measurements were made over pure stands of Aspen in the Superior National Forest of northern Minnesota. The analysis indicates that the reflectance may be sensitive to the leaf area index of the Aspen early in the season. The sensitivity disappears as the season progresses. Based on the results of model calculations, an explanation for the observed relationship is developed. The model calculations indicate that the sensitivity of the reflectance to the Aspen overstory depends on the amount of understory present.

Badhwar, G.↗

NASA NTRS1983

The reflection spectrum of liquid sulfur - Implications for Io

The spectral reflectance from 0.38 to 0.75 micron of a column of liquid sulfur has been measured at several temperatures between the melting point (approximately 118 C) and 173 C. Below 160 C the spectral reflectance was observed to vary reversibly as a function of temperature, indepenent of the previous thermal history of the column. Once the temperature exceeded 160 C, the spectrum would not change given a subsequent decrease in temperature. The spectral reflectance of the liquid-sulfur column at all temperatures was very low (10-19 percent). Combining this information with Voyager spectrophotometry of Jupiter's satellite Io, it is concluded that liquid sulfur at any temperature on Io's surface would be classified as a 'black area' according to the standards used by the Voyager imaging team in their spectrophotometric analysis (Soderblom, Johnson, Morrison, Danielson, Smith, Veverka, Cook,Sagan, Kupferman, Pieri, Mosher, Avis, Gradie, and Clancy /1980/.

Nelson, R. M.↗

NASA NTRS1984

S band radar differential reflectivity measurements in multiple polarization planes along satellite slant paths

A novel approach to making differential reflectivity measurements in multiple polarization planes has been proposed. This paper describes a versatile technique using a mechanical polarization switch and the systematic errors in differential reflectivity measurements which result. Initial results of simultaneous X band slant path measurements of attenuation and depolarization at 11.6 GHz and differential reflectivity measurements at 2.8 GHz using a slow polarization switch are presented.

Marshall, R. E.↗