SEARCH · Engineering Papers

Results for “point cloud”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

All sources NASA NTRS DOE OSTI

NASA NTRS1994

IRAS images of nearby dark clouds

We have investigated approximately 100 nearby molecular clouds using the extensive, all-sky database of IRAS. The clouds in this study cover a wide range of physical properties including visual extinction, size, mass, degree of isolation, homogeneity and morphology. IRAS 100 and 60 micron co-added images were used to calculate the 100 micron optical depth of dust in the clouds. These images of dust optical depth compare very well with (12)CO and (13)CO observations, and can be related to H2 column density. From the optical depth images we locate the edges of dark clouds and the dense cores inside them. We have identified a total of 43 `IRAS clouds' (regions with A(sub v) greater than 2) which contain a total of 255 `IRAS cores' (regions with A(sub v) greater than 4) and we catalog their physical properties. We find that the clouds are remarkably filamentary, and that the cores within the clouds are often distributed along the filaments. The largest cores are usually connected to other large cores by filaments. We have developed selection criteria to search the IRAS Point Source Catalog for stars that are likely to be associated with the clouds and we catalog the IRAS sources in each cloud or core. Optically visible stars associated with the clouds have been identified from the Herbig and Bell catalog. From these data we characterize the physical properties of the clouds including their star-formation efficiency.

Wood, Douglas O. S.↗

NASA NTRS2018

Reply to "Comments on 'A CloudSat-CALIPSO View of Cloud and Precipitation Properties Across Cold Fronts over the Global Oceans'"

In Naud et al., a compositing method was utilized with CloudSat-CALIPSO observations to obtain mean transects of cloud vertical distribution and surface precipitation across cold fronts, and to examine their sensitivity to the large-scale properties of the parent extratropical cyclone. This reply demonstrates the value of compositing for evaluating numerical models, and presents additional results that address the issue of the sensitivity of the initial results to the frontal detection methodology and the potential misclassification of occlusions as cold fronts. Here a sensitivity study of the cold front composite transects of cloud cover to the input datasets or the method utilized to locate the cold fronts demonstrates that these composite transects are robust and only marginally sensitive to cold front location methods. The same conclusion is reached for the robustness of the contrast between Northern and Southern Hemisphere cloud transects. While occlusions cannot directly be flagged within the database at this point, comparisons of transects obtained for subsets of cyclones of different age indicate that the misclassification of occluded fronts as cold fronts does not explain the predominance of cloud and precipitation on the warm side of the cold fronts. The strong signal on the warm side might be better explained by a predominance of forward sloping cold fronts, or the presence of the warm conveyor belt.

Cloud cover; Cold fronts; Extratropical cyclones; ↗

NASA NTRS1974

Optical polarization measurements of the Jupiter atmosphere at 103 deg phase angle

The first measurements have been made of the linear polarization of sunlight scattered by the Jupiter atmosphere at phase angles greater than 12 deg, using the imaging photopolarimeter on Pioneer 10. The data are of high accuracy, in spite of several problems in the instrument. The polarization is positive at 440 nm. There is no direct evidence for spherical particles in the Jupiter clouds. Using a simple model of Rayleigh scattering above a Lambertian cloud layer, a unique fit is found to the observed intensity and polarization at each point on the planet. The resulting Rayleigh optical depths, if they are attributed to molecular scattering alone (i.e., no aerosols above the cloud tops), can be converted into physical altitudes of the cloud tops. The first results suggest that the north tropical zone, parts of the equatorial zone, and the red spot are all elevated regions.

Coffeen, D. L.↗

NASA NTRS2010

Using Multi-Scale Modeling Systems to Study the Precipitation Processes

In recent years, exponentially increasing computer power has extended Cloud Resolving Model (CRM) integrations from hours to months, the number of computational grid points from less than a thousand to close to ten million. Three-dimensional models are now more prevalent. Much attention is devoted to precipitating cloud systems where the crucial 1-km scales are resolved in horizontal domains as large as 10,000 km in two-dimensions, and 1,000 x 1,000 km2 in three-dimensions. Cloud resolving models now provide statistical information useful for developing more realistic physically based parameterizations for climate models and numerical weather prediction models. It is also expected that NWP and mesoscale model can be run in grid size similar to cloud resolving model through nesting technique. Recently, a multi-scale modeling system with unified physics was developed at NASA Goddard. It consists of (1) a cloud-resolving model (Goddard Cumulus Ensemble model, GCE model), (2) a regional scale model (a NASA unified weather research and forecast, WRF), (3) a coupled CRM and global model (Goddard Multi-scale Modeling Framework, MMF), and (4) a land modeling system. The same microphysical processes, long and short wave radiative transfer and land processes and the explicit cloud-radiation, and cloud-land surface interactive processes are applied in this multi-scale modeling system. This modeling system has been coupled with a multi-satellite simulator to use NASA high-resolution satellite data to identify the strengths and weaknesses of cloud and precipitation processes simulated by the model. In this talk, a review of developments and applications of the multi-scale modeling system will be presented. In particular, the results from using multi-scale modeling system to study the interactions between clouds, precipitation, and aerosols will be presented. Also how to use of the multi-satellite simulator to improve precipitation processes will be discussed.

Tao, Wei-Kuo↗

NASA NTRS2010

Using Multi-Scale Modeling Systems and Satellite Data to Study the Precipitation Processes

In recent years, exponentially increasing computer power extended Cloud Resolving Model (CRM) integrations from hours to months, the number of computational grid points from less than a thousand to close to ten million. Three-dimensional models are now more prevalent. Much attention is devoted to precipitating cloud systems where the crucial 1-km scales are resolved in horizontal domains as large as 10,000 km in two-dimensions, and 1,000 x 1,000 sq km in three-dimensions. Cloud resolving models now provide statistical information useful for developing more realistic physically based parameterizations for climate models and numerical weather prediction models. It is also expected that NWP and mesoscale models can be run in grid size similar to cloud resolving models through nesting technique. Recently, a multi-scale modeling system with unified physics was developed at NASA Goddard. It consists of (1) a cloud-resolving model (Goddard Cumulus Ensemble model, GCE model). (2) a regional scale model (a NASA unified weather research and forecast, W8F). (3) a coupled CRM and global model (Goddard Multi-scale Modeling Framework, MMF), and (4) a land modeling system. The same microphysical processes, long and short wave radiative transfer and land processes and the explicit cloud-radiation and cloud-land surface interactive processes are applied in this multi-scale modeling system. This modeling system has been coupled with a multi-satellite simulator to use NASA high-resolution satellite data to identify the strengths and weaknesses of cloud and precipitation processes simulated by the model. In this talk, a review of developments and applications of the multi-scale modeling system will be presented. In particular, the results from using multi-scale modeling systems to study the interactions between clouds, precipitation, and aerosols will be presented. Also how to use the multi-satellite simulator to improve precipitation processes will be discussed.

Tao, Wei--Kuo↗

NASA NTRS2011

Using Multi-Scale Modeling Systems and Satellite Data to Study the Precipitation Processes

In recent years, exponentially increasing computer power has extended Cloud Resolving Model (CRM) integrations from hours to months, the number of computational grid points from less than a thousand to close to ten million. Three-dimensional models are now more prevalent. Much attention is devoted to precipitating cloud systems where the crucial 1-km scales are resolved in horizontal domains as large as 10,000 km in two-dimensions, and 1,000 x 1,000 km2 in three-dimensions. Cloud resolving models now provide statistical information useful for developing more realistic physically based parameterizations for climate models and numerical weather prediction models. It is also expected that NWP and mesoscale model can be run in grid size similar to cloud resolving model through nesting technique. Recently, a multi-scale modeling system with unified physics was developed at NASA Goddard. It consists of (l) a cloud-resolving model (Goddard Cumulus Ensemble model, GCE model), (2) a regional scale model (a NASA unified weather research and forecast, WRF), (3) a coupled CRM and global model (Goddard Multi-scale Modeling Framework, MMF), and (4) a land modeling system. The same microphysical processes, long and short wave radiative transfer and land processes and the explicit cloud-radiation, and cloud-land surface interactive processes are applied in this multi-scale modeling system. This modeling system has been coupled with a multi-satellite simulator to use NASA high-resolution satellite data to identify the strengths and weaknesses of cloud and precipitation processes simulated by the model. In this talk, the recent developments and applications of the multi-scale modeling system will be presented. In particular, the results from using multi-scale modeling system to study the precipitating systems and hurricanes/typhoons will be presented. The high-resolution spatial and temporal visualization will be utilized to show the evolution of precipitation processes. Also how to use of the multi-satellite simulator tqimproy~ precipitation processes will be discussed.

Tao, Wei-Kuo↗

NASA NTRS2011

Microphysics in the Multi-Scale Modeling Systems with Unified Physics

In recent years, exponentially increasing computer power has extended Cloud Resolving Model (CRM) integrations from hours to months, the number of computational grid points from less than a thousand to close to ten million. Three-dimensional models are now more prevalent. Much attention is devoted to precipitating cloud systems where the crucial 1-km scales are resolved in horizontal domains as large as 10,000 km in two-dimensions, and 1,000 x 1,000 km2 in three-dimensions. Cloud resolving models now provide statistical information useful for developing more realistic physically based parameterizations for climate models and numerical weather prediction models. It is also expected that NWP and mesoscale model can be run in grid size similar to cloud resolving model through nesting technique. Recently, a multi-scale modeling system with unified physics was developed at NASA Goddard. It consists of (l) a cloud-resolving model (Goddard Cumulus Ensemble model, GCE model), (2) a regional scale model (a NASA unified weather research and forecast, WRF), (3) a coupled CRM and global model (Goddard Multi-scale Modeling Framework, MMF), and (4) a land modeling system. The same microphysical processes, long and short wave radiative transfer and land processes and the explicit cloud-radiation, and cloud-surface interactive processes are applied in this multi-scale modeling system. This modeling system has been coupled with a multi-satellite simulator to use NASA high-resolution satellite data to identify the strengths and weaknesses of cloud and precipitation processes simulated by the model. In this talk, the microphysics developments of the multi-scale modeling system will be presented. In particular, the results from using multi-scale modeling system to study the heavy precipitation processes will be presented.

Tao, Wei-Kuo↗

NASA NTRS1982

Magnetic field and plasma wave observations in a plasma cloud at Venus

Pioneer Venus magnetic field and plasma wave data are examined in a particularly clear example of a plasma cloud above the Venus ionosphere. The magnetic configuration is suggestive of acceleration of the plasma cloud by magnetic tension. If the plasma is at rest at the subsolar point, it could be accelerated to approximately 90 km/sec by the observed stress at the location of the measurement. This far exceeds the escape velocity and suggests that plasma clouds do form a significant loss mechanism for the Venus ionosphere but does not necessarily indicate that the plasma cloud is detached from the ionosphere proper. The plasma cloud is accompanied by strong plasma wave activity and is significantly hotter than the ionospheric plasma encountered later on the same pass. A loss rate of the order of 2 x 10 to the 25th ions/sec is estimated during this event. The geometry suggested by these observations is one of a ridge of dense cold plasma starting in the subsolar regions and flowing over the poles of the planet. Thus, these plasma clouds may be the planetary analog of cometary tail rays.

Russell, C. T.↗

DOE OSTI2023

The use of double-mode RR Lyrae stars as robust distance and metallicity indicators

Abstract RR Lyrae stars are one of the primary distance indicators for old stellar populations such as globular clusters, dwarf galaxies and galaxies. Typically, fundamental-mode RR Lyr stars are used for distance measurements, and their accuracy is strongly limited by the dependence of absolute magnitudes on metallicity, in both the optical and infrared bands. Here, we report the discovery of a period–(period ratio)–metallicity relation for double-mode RR Lyr stars, which can predict metallicity as accurately as the low-resolution spectra. With theoretical and observational evidence, we propose that the period–luminosity relation of double-mode RR Lyr stars is not affected by the metallicity. Combining the Large Magellanic Cloud distance and Gaia parallaxes, we calibrate the zero point of the period–luminosity relation to an error of 0.022 mag, which means that in the best case double-mode RR Lyr stars can anchor galaxy distances to an accuracy of 1.0%. For four globular clusters and two dwarf galaxies, we obtain distances using double-mode RR Lyr stars with a distance accuracy of 2–3% and 1–2%, respectively. With future telescopes such as the China Space Station Telescope and the Vera C. Rubin Observatory, double-mode RR Lyr stars will be established as an independent distance ladder in the near-field universe.

Astronomy & Astrophysics↗

DOE OSTI2026

Merged W-band radar and Ceilometer / Derived Data

The dataset contains the first three moments of radar Doppler spectra from the vertically pointing W-band radar and Ceilometer backscatter and cloud base heights at a uniform temporal and spatial resolution. The radar reflectivity and ceilometer backscatter has been calibrated.

17 WIND ENERGY↗

DOE OSTI2026

Merged W-band Radar and Ceilometer / Derived Data

17 WIND ENERGY↗

DOE OSTI2024

Geometry of Non-Diffusive Tracer Transport in Gridded Atmospheric Models

A first-order linear and numerically non-diffusive Eulerian transport algorithm, minVAR, was recently developed for preservation of correlations between interrelated tracers during advective transport. The present study extends this work by: (1) providing further investigation of several interesting geometric constructions found in contours of constant minVAR, short for minimum variance, through extension to three coordinate dimensions. These contours capture point-by-point representations of thousands of individual atmospheric aerosol and/or cloud particles as they evolve and are rendered on Eulerian grids at a level of sub-grid resolution limited only by numerical precision; and (2) exploration of geometric similarities between the Arakawa C-grid, used to obtain interpolated values of the wind field at grid scale and minVAR. In particular, we consider interpolation of the u and v horizontal components of wind velocity from grid to sub-grid scales. The last results are motivated by recent applications of the Weather Research and Forecasting (WRF) model applied in the coastal Houston region, where the recent TRacking Aerosol Convection Interactions ExpeRiment (TRACER) field campaign was organized. A unique and fully consistent mapping is obtained between particles moving along meteorological wind trajectories and the non-diffusive, non-dispersive representation of such trajectories on an Eulerian grid.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2020

Constraining the Twomey effect from satellite observations: issues and perspectives

Abstract. The Twomey effect describes the radiative forcing associated with a change in cloud albedo due to an increase in anthropogenic aerosol emissions. It is driven by the perturbation in cloud droplet number concentration (ΔNd, ant) in liquid-water clouds and is currently understood to exert a cooling effect on climate. The Twomey effect is the key driver in the effective radiative forcing due to aerosol–cloud interactions, but rapid adjustments also contribute. These adjustments are essentially the responses of cloud fraction and liquid water path to ΔNd, ant and thus scale approximately with it. While the fundamental physics of the influence of added aerosol particles on the droplet concentration (Nd) is well described by established theory at the particle scale (micrometres), how this relationship is expressed at the large-scale (hundreds of kilometres) perturbation, ΔNd, ant, remains uncertain. The discrepancy between process understanding at particle scale and insufficient quantification at the climate-relevant large scale is caused by co-variability of aerosol particles and updraught velocity and by droplet sink processes. These operate at scales on the order of tens of metres at which only localised observations are available and at which no approach yet exists to quantify the anthropogenic perturbation. Different atmospheric models suggest diverse magnitudes of the Twomey effect even when applying the same anthropogenic aerosol emission perturbation. Thus, observational data are needed to quantify and constrain the Twomey effect. At the global scale, this means satellite data. There are four key uncertainties in determining ΔNd, ant, namely the quantification of (i) the cloud-active aerosol – the cloud condensation nuclei (CCN) concentrations at or above cloud base, (ii) Nd, (iii) the statistical approach for inferring the sensitivity of Nd to aerosol particles from the satellite data and (iv) uncertainty in the anthropogenic perturbation to CCN concentrations, which is not easily accessible from observational data. This review discusses deficiencies of current approaches for the different aspects of the problem and proposes several ways forward: in terms of CCN, retrievals of optical quantities such as aerosol optical depth suffer from a lack of vertical resolution, size and hygroscopicity information, non-direct relation to the concentration of aerosols, difficulty to quantify it within or below clouds, and the problem of insufficient sensitivity at low concentrations, in addition to retrieval errors. A future path forward can include utilising co-located polarimeter and lidar instruments, ideally including high-spectral-resolution lidar capability at two wavelengths to maximise vertically resolved size distribution information content. In terms of Nd, a key problem is the lack of operational retrievals of this quantity and the inaccuracy of the retrieval especially in broken-cloud regimes. As for the Nd-to-CCN sensitivity, key issues are the updraught distributions and the role of Nd sink processes, for which empirical assessments for specific cloud regimes are currently the best solutions. These considerations point to the conclusion that past studies using existing approaches have likely underestimated the true sensitivity and, thus, the radiative forcing due to the Twomey effect.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2023

MICRE W-band radar reflectivity and Doppler velocity

Daily files containing radar reflectivity and mean Doppler velocity collected from vertically pointing W-band radar during the Macquarie Island Cloud & Radiation Experiment (MICRE): April 2016 to March 2017.

54 ENVIRONMENTAL SCIENCES↗

NASA NTRS1976

The galactic distribution (in radius and Z) of interstellar molecular hydrogen

Observations of the galactic longitude and latitude distributions of gamma = 2.6 mm CO emission are presented. Analysis of this spectral line data yields the large scale distribution of molecular clouds in the galactic disk and their z-distribution out of the disk. Strong maxima in the number of molecular clouds occur in the galactic nucleus and at galactic radii 4-8 kpc. The peak at 4-8 kpc correlates well with a region of enhanced 100 Mev gamma ray emissivity. This correlation strongly supports the conclusion that the gamma rays are produced as a result of cosmic ray interactions in molecular H2 clouds rather than HI. One important implication of this is that the interstellar magnetic field lines to which cosmic rays are confined must therefore not be excluded from these dense clouds. The width of the cloud layer perpendicular to galactic plane between half density points is 105 + or - 15 pc near the 5.5 kpc peak. The total mass of molecular gas in the interior of the galaxy exceeds that of atomic hydrogen.

Scoville, N. Z.↗

NASA NTRS1980

Magnetospheric multiprobes: Investigations and instrumentation

The multiprobe scientific objectives are to: (1) determine the spatial structure of plasma phenomena such as the aurora, convection reversals, and ion troughs; (2) separate spatial and temporal variations in these phenomena; (3) determine field aligned current densities; (4) perform multiple point analysis of particle beams, wave fields, and plasma clouds that are injected into the ionosphere and magnetosphere by Spacelab active experiment facilities. Trade studies described include: instrument accommodations, power, attitude determination, electric field antennas, storage and ejection, thermal control, tracking communications, command and data management, payload and mission specialist support, functional objectives, and orbital analysis.

Burch, J. L.↗

NASA NTRS1982

Lightning to the ionosphere

It is pointed out that most lightning discharges take place within clouds or between clouds and the ground. There are a few reports, however, of a much rarer form of lightning that has been observed to come out of the top of the thunderstorm cloud and extend vertically for some distance into the clear air above it. A description is presented of the observations of such an incident made by a NASA pilot. The incident occurred when the pilot was flying a T-38 jet aircraft at an altitude of about 40,000 feet over Amarillo in Texas. The pilot found himself behind an extremely fast-moving very large cold front. A large number of lightning flashes could be seen. While most of the lightning flashes were typical, approximately every 50th or 100th discharge would go from the top of a cloud vertically upwards through the clear air towards the ionosphere. Explanations for these observations are discussed.

Vaughan, O. H., Jr.↗

NASA NTRS1986

Near-infrared observations of IRAS sources in and near dense cores

We report 0.4 to 20 micron photometry of 27 Infrared Astronomy Satellite (IRAS) point sources associated with dense cores in nearby dark clouds. It is found that these objects have a bimodal distribution of spectral slopes. The objects in the group with steep spectral slopes are typically within one half power radius of the core peak and are not visible on the POSS. The remainder of the objects are typically further from their cores, are optically visible and have shallow spectral slopes (s is approximately 0.6). Most of the sources in this group which have been previously identified are T Tauri stars. Both the groups of objects have essentially the same luminosity function with median luminosity of 1 to 2 L(solar), which is similiar to the luminosity function for T Tauri stars. The near-infrared (J,H,K,L) colors of the objects have been used to estimate the visual extinction to the stars. This indicates that the typical steep spectrum source has extinction A(upsilon) of approximately 30 magnitudes, which is larger by a factor of 3 to 4 than a uniform core can provide, thus the density must rise steeply in the vicinity of the star. For those objects where optical estimates of the extinction are available the optical estimates are typically smaller than our IR estimates by a factor of 1.6. For multiple scattering by grains that scatter primarily in the forward direction, this implies a grain albedo of 0.4 at V, consistent with theoretical predictions for bare grains. Using this derived extinction, the FIR emission from a spherical shell with an inverse power law density which contributes the correct amount of extinction has been modelled. It is shown that to be consistent with both the observations of the density of the core at a scale of 1.5 x 10(17) cm and the extinction derived from the near-IR colors there must be a circumstellar hole of radius 10-100 A.U. for all density laws with exponents greater than 1.2. It is also shown that a component in addition to the star and circumstellar shell is necessary to match the observed spectrum of steep spectrum sources.

Fuller, G. A.↗