Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “phase pure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

High-pressure synthesis and thermodynamic stability of PdH 1±ε up to 8 GPa

Palladium hydride alloys are superconductors and hydrogen storage materials. One synthesis route is compression of Pd to high pressure in a hydrogen-rich environment. Here we report the evolution of the unit cell volume of PdH x synthesized by compressing Pd in a pure H 2 medium to pressures from 0.2 to 8 GPa in a diamond anvil cell at room temperature. The volume of the face-centered cubic unit cell changes nonmonotonically with pressure, increasing upon compression from 0.2 to 1 GPa and decreasing upon compression from 1 to 8 GPa. Volume is reversible upon decompression and is independent of whether the sample was heated to 600 K at low pressure (P < 2 GPa). The x-ray diffraction data show no evidence for a phase transition between 0.2 and 8 GPa. The volume maximum at 1 GPa must be caused by progressive hydrogenation from 0 to 1 GPa. Assuming a pressure-volume-composition equation of state derived from previously published data, the [H]:[Pd] ratio in this study increases to a maximum value of x = 1 ± 0.02 at 2 ± 0.5 GPa and remains stable upon further compression to and from 8 GPa. These results add to a mounting body of evidence that PdH 1±ϵ is in thermodynamic equilibrium with pure H 2 at room temperature from 2 GPa to at least 8 GPa. Here, the simplest interpretation is that H atoms occupy all octahedral sites and no tetrahedral sites in face-centered cubic PdH 1.0 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Benchmark microgravity experiments and computations for 3D dendritic-array stability in directional solidification

In this study, we present a comprehensive quantitative analysis of stability bands for dendritic arrays during directional solidification of a transparent succinonitrile-0.46 wt % camphor alloy, spanning a broad range of pulling velocities. Taking advantage of the microgravity environment aboard the International Space Station where most convection effects are suppressed, we obtain unique measurements that quantify the stable primary spacing range of spatially extended three-dimensional dendritic array structures under purely diffusive growth conditions. Through carefully designed velocity jump experiments and detailed examination of sub-grain boundary dynamics, we characterize key instabilities, including elimination and tertiary branching, shedding new light on the mechanisms governing dynamic dendritic spacing selection in extended 3D arrays. Phase field simulations are performed to characterize the stability limits of dendritic array structures for quantitative comparison with the flight experiments. Although the simulations capture general trends, significant deviations are noted at the upper stability boundary, indicating the influence of additional, unexplored factors. These findings contribute to a deeper understanding of dendritic growth dynamics and offer valuable benchmark data that could aid in refining predictive models and improving control of dendritic microstructures in metallurgical applications.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Computational modeling of grain boundary segregation: A review

Nearly all metals, alloys, ceramics, and their associated composites are polycrystalline in nature, with grain boundaries that separate well-defined crystalline regions that influence materials properties. In all but the most pure elemental systems, intentional solutes or impurities are present and can segregate to, or less commonly away from, the grain boundaries, in turn influencing boundary behavior, their stability, and associated materials properties. In some cases, grain-boundary segregation can also trigger “phase-like” structural transitions that dramatically alter the essential nature of the boundary. With the development of advanced electron microscopy techniques, researchers can directly observe grain-boundary structures and segregation with atomic precision. Despite such spatial resolution, the underlying mechanisms governing grain-boundary segregation remain difficult to characterize. As a result, computational modeling techniques such as density functional theory, molecular dynamics, mesoscale phase-field, continuum defect theory, and others are important complementary tools to experimental observations for studying grain-boundary segregation behavior. In conclusion, these computational methods offer the ability to explore the underlying formation mechanisms of grain-boundary segregation, elucidate complex segregation behavior, and provide insights into solutions to effectively controlling microstructure.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Investigations Towards Ultra-Low Cost Nb 3 Sn SRF Fabrication via Melt Casted Bronze Route Processing

Here, a novel approach to fabricating Nb 3 Sn SRF cavities and other RF components using an ultra-low-cost melt casting fabrication process has been investigated. This simple, low cost melt casting technique has the potential to be used to fabricate nearly any superconducting Nb3Sn structure using either the Bronze Route (BR), Internal Tin (IT), External Tin (ET) processes as well as normal conducting pure copper (Cu) cavities. Most of the heat treated samples that were examined using SEM/EDX seemed to show a reasonable correlation of T c onset and transition width (ΔT c ) of the ingots initial/starting Sn content to the desired stoichiometric Nb 3 Sn phase, where the lower starting Sn content coupons resulted in lower T c 's with broader transition widths and the higher starting Sn coupons resulted in higher T c 's with narrower ΔT c ’s. The best samples had T c onsets ~17-18 K and ΔT c 's < 2 K. Two samples were further tested for RF surface resistance (R s ) and Quality Factor (Q) at JLAB. Here, these RF measurements were performed at 7.4 GHz using a calorimetric technique and showed two transitions, one at ~ 8 K and another at ~ 14 K; values of R s were at least two orders of magnitude higher than similar high quality Nb 3 Sn films directly deposited substrates by JLAB and with another superconducting transition close to the superconducting transition temperature of niobium. Substantial improvements in the processing variables ranging from higher quality of the initial ingots with higher Sn content, to better electropolishing and reaction heat treatment regimens will be necessary to realize improved RF performance metrics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Grid-Connected Self-Synchronous Cascaded H-Bridge Inverters with Autonomous Power Sharing: Preprint

Cascaded inverters are widely applied in applications where elevated ac voltages are required while using semiconductor devices with lower voltage ratings. Here, we focus on structures that require localized power transfer between low-voltage sources/loads dispersed across inverter dc links and the inverter ac-sides are series-connected across a three-phase medium-voltage ac grid. To date, decentralized controllers that allow for bi-directional power transfer in such systems are limited. To fill this gap, we propose a virtual oscillator controller which modulates the power processed by each inverter in a purely decentralized manner.

autonomous power sharing↗
DOE OSTI2022

Suppression of ferromagnetism governed by a critical lattice parameter in CeTiGe 3 with hydrostatic pressure or V substitution

We combine structural and magnetic measurements to compare the different magnetic phase diagrams between the pressure and substitution studies in CeTiGe 3 . We report on the structural, magnetic, and electrical transport properties of single crystals of CeTi 1–x V x Ge 3 (x = 0, 0.1, 0.2, 0.3, 0.4, 0.9, and 1), and of polycrystalline samples (x = 0.5, 0.6, 0.7, 0.8), as well as structural properties of CeTiGe 3 under pressure up to 9 GPa. The ferromagnetic ordering in CeTiGe 3 is suppressed with V doping in CeTi 1–x V x Ge 3 , and suggests a possible ferromagnetic quantum critical point near x = 0.45. We perform a detailed crystalline electric field (CEF) analysis, and the magnetic susceptibility data in pure CeTiGe 3 and CeVGe 3 can be well explained by the CEF model. The proposed CEF energy levels suggest that there is a gradual change of the ground state from |±5/2 in CeTiGe 3 to |±1/2 in CeVGe 3 , and a suppression of CEF splitting energies near the quantum critical region. When hydrostatic pressure is used instead of chemical substitution, the quantum critical point is avoided by the appearance of magnetic phases above around 4.1 GPa. In the substitution study, the ferromagnetic and antiferromagnetic regions are well separated, whereas they touch in the pressure study. We observe a different trend in the temperature dependence of the resistivity maximum in both studies, suggesting that the CEF splitting energy is suppressed by V substitution but enhanced by pressure. Here, we also observe different responses in lattice constants between the two studies, highlighting the fact that substitution effects cannot be reduced to chemical pressure effects only. Nevertheless, when the magnetic phase diagrams of both hydrostatic pressure and substitution are compared, we find a common critical lattice constant c = 5.78 Å where the ferromagnetic ordering is suppressed in both studies.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

X-ray Nanocomputed Tomography in Zernike Phase Contrast for Studying 3D Morphology of Li–O 2 Battery Electrode

In this work, we investigated the lithium peroxide (Li 2 O 2 ) and pore size distribution in lithium-O 2 battery electrodes at different states of charge using transmission X-ray microscopy coupled with Zernike phase contrast to carry out nano-Computed Tomography. We report that such technique enables, at the nanoscale, to distinguish light elements such as carbon and Li 2 O 2 in Li-O 2 battery cathode electrodes. We verified by wave-propagation simulation that this approach efficiently improves the contrast of images in comparison with the pure absorption. The Li 2 O 2 distribution and thickness, interphases, and pore network are visualized and quantified, which give a valuable insight into our cathode architecture. From this 3D analysis, we highlight modifications of the air-cathode morphology and the Li 2 O 2 spatial organization as well as their potential implication in terms of carbon surface passivation and pore-clogging. After the full recharge process, this technique can also reveal the spatial distribution of the residual Li 2 O 2 and other byproducts.

25 ENERGY STORAGE↗
DOE OSTI2020

The Efficacy of Replacing Metallic Cerium in Aluminum–Cerium Alloys with LREE Mischmetal

The ongoing development of aluminum–cerium alloys has produced materials exhibiting elevated temperature mechanical property retention, long term microstructural stability, and flexible processability compared to traditional aluminum alloys, accommodating the growing demand for high temperature aluminum alloys not requiring the use of high-cost elements like scandium. To date, reported Al–Ce alloy compositions contain large amounts of elemental cerium. Mischmetal (MM), a mixture of lanthanum, cerium, and other light rare earth elements (LREE) is less expensive and more available than pure cerium. The chemical similarity of the LREEs means there is possibility to use MM as the primary alloy addition, lowering alloy cost. This talk will report the effect of using MM instead of cerium in a 12 wt% binary alloy on mechanical properties, phase constituency, thermal stability, and load sharing. Results will show that MM can be substituted completely for cerium with a mostly positive impact on alloy performance.

Sims, Zachary↗
DOE OSTI2021

Total absorption spectroscopy of the β decay of 101,102 Zr and 109 Tc

The β decay of 101,102 Zr and 109 Tc was studied using the technique of total absorption spectroscopy. The experiment was performed at the National Superconducting Cyclotron Laboratory using the Summing NaI(Tl) (SuN) detector in the first-ever application of total absorption spectroscopy with a fast beam produced via projectile fragmentation. The β -decay feeding intensity and Gamow-Teller transition strength distributions were extracted for these three decays. The extracted distributions were compared to three different quasiparticle random-phase approximation (QRPA) models based on different mean-field potentials. A comparison with calculations from one of the QRPA models was performed to learn about the ground-state shape of the parent nucleus. For 101 Zr and 102 Zr, calculations assuming a pure shape configuration (oblate or prolate) were not able to reproduce the extracted distributions. These results may indicate that some type of mixture between oblate and prolate shapes is necessary to reproduce the extracted distributions. For 109 Tc, a comparison of the extracted distributions with QRPA calculations suggests a dominant oblate configuration. The other two QRPA models are commonly used to provide β-decay properties in r-process network calculations. This work shows the importance of making comparisons between the experimental and theoretical β-decay distributions, rather than just half-lives and β-delayed neutron emission probabilities, as close to the r-process path as possible.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Robustness of quantum correlation in quantum energy teleportation

In this article, we explore a feedback-control protocol in different quantum field theories (QFTs) to study the quantum correlation in nonunitary evolution of quantum systems. Traditional studies on QFTs focus on quantum entanglement of pure states under the unitary evolution, however, we examine quantum correlation in mixed states using quantum energy teleportation (QET), which is an energy transfer protocol by utilizing ground state entanglement, and introduce quantum discord as a measure. QET involves a midcircuit measurement, which disrupts pure state entanglement. Despite this, our analysis demonstrates that quantum discord maintains the correlation throughout the QET process. We conducted numerical analyses with benchmark models including the Nambu-Jona-Lasinio (NJL) model, revealing that quantum discord consistently acts as an order parameter for phase transitions. The model is extended in a way that it has both the chiral chemical potential and the chemical potential, which are useful to study the phase structures mimicking the chiral imbalance between left- and right- quarks coupled to the chirality density operator. In all cases we studied, the quantum discord behaved as an order parameter of the phase transition. Published by the American Physical Society 2024

Ikeda, Kazuki (ORCID:0000000338212669)↗
DOE OSTI2023

Correlating the Viscosity and Rate of Water Diffusion in Semisolid Gel-Forming Aerosol Particles

Aerosol particles are known to exist in highly viscous amorphous states at a low relative humidity and temperature. The slow diffusion of molecules in viscous particles impacts the uptake and loss of volatile and semivolatile species and the rate of heterogeneous chemistry. Recent work has demonstrated that in particles containing organic molecules and salts, the formation of two-phase gel states is possible, leading to observations of rigid particles that resist coalescence. The way that molecules diffuse and transport in gel systems is not well-characterized. In this work, we use an electrodynamic balance to levitate sample particles containing a range of organic compounds in mixtures with calcium chloride and measure the rate of water diffusion. Particles of the pure organics have been shown to form viscous amorphous states, while in mixtures with divalent salts, coalescence measurements have revealed the apparent solidification of particles, consistent with the formation of a gel state facilitated by ion–molecule interactions. We report in several cases that water transport can actually be increased in the rigid gel state relative to the pure compound that forms a viscous state under similar conditions. These measurements reveal the limitations of using viscosity as a metric for predicting molecular diffusion and that the gel structure that forms is a much stronger controlling factor in the rate of diffusion. In conclusion, this underscores the need for diffusion measurements as well as a deeper understanding of noncovalent molecular assembly that leads to supramolecular structures in aerosol particles.

organic-inorganic mixtures↗
DOE OSTI2025

Gate control of electron correlations towards Mott field effect transistors (MottFET)

The modulation of channel conductance in field-effect transistors (FETs) via metal-insulator-semiconductor structures has revolutionized information processing and storage. However, the limitations of silicon-based FETs in electrical switching have driven the search for new materials capable of overcoming these constraints. Electrostatic gating of competing electronic phases in a Mott material near its metal-to-insulator transition (MIT) offers the prospects of substantial modulation of the conducting electrons and electrical resistivity through small changes in band filling. While electrostatic control of the MIT has been previously reported, the advancement of Mott materials toward novel Mott-based transistors, MottFETs requires the realization of their unique physical properties in a solid-state device. In this study, we present gate control of electron correlation using a solid-state device utilizing the oxide Mott system La 1-x Sr x VO 3 as a correlated FET channel. We report on a gate resistance response that cannot be explained in a purely electrostatic framework. This behavior suggests an enhancement in effective mass and a reduction in effective carrier density as the system approaches its insulating state, consistent with theoretical predictions for Mott systems, suggesting at least 100× charge gain originating from the correlated behavior. These preliminary results pave the way toward the development of highly efficient, low-power electronic devices that could surpass the performance bottlenecks of conventional FETs by leveraging the electronic phase transitions of correlated electron systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Analysis of the linear and nonlinear stability of Alfven eigenmodes and fish-bones in JET DT discharges: mode identification and shear flows generation

The plasma in future nuclear fusion reactors will be heated by neutral beam injectors (NBIs) and high frequency electromagnetic waves as well as fusion born alpha particles. Energetic particles (EPs), with energies up to two orders of magnitude larger than the thermal plasma, can trigger EP driven modes and induce harmful EP losses, reducing the plasma heating efficiency and the economical viability of the reactor. The present study is dedicated to analyze the Alfven Eigenmode (AE) activity in JET D–T discharges, the closest experiment to reactor-like operation performed until now. There, EP driven modes are induced by the combined effect of tangential NBIs and ion cyclotron resonance heating (ICRH) driven EP. Linear and nonlinear simulations are performed with the gyro-fluid FAR3d code to analyze the AE activity observed in the discharge 99896. The linear simulations reproduce the unstable n = 3 to 5 toroidal AEs (TAE) at the inner plasma region observed in the experiment, triggered by highly energetic passing deuterium populations injected by the tangential NBIs, further accelerated by the effect of the ICRH up to 1 MeV. In addition, fish-bones triggered by energetic trapped hydrogen induced by the ICRH are also reproduced. On the other hand, the alpha particles density is too small to destabilize AEs in the experiment. Nonetheless, increasing artificially the alpha density by one order of magnitude, an n = 1 beta induced AE can be destabilized in the inner plasma region. Nonlinear simulations indicate the generation of zonal structures during the AE/fish-bone saturation phase. TAE and fish-bones causes a rather weak increase of the passing D and trapped H EP (around 2%), respectively. Shear flows and zonal currents are generated during the saturation of TAE and fish-bones. Nonlinear simulations performed for D–T and pure deuterium thermal plasma indicate AE/fish-bone activity is weaker and shear flows are less intense in the pure deuterium case, trends consistent with the experimental observations that also indicates a deterioration of the thermal plasma confinement. Therefore, both numerical studies and experimental evidence indicate the generation of shear flows by AE/fish-bones could be connected with an improvement of the thermal plasma confinement.

AE↗
DOE OSTI2020

Sr 1-x Ca x Fe 1-y Co y O 3-δ as facile and tunable oxygen sorbents for chemical looping air separation

Abstract Chemical looping air separation (CLAS) is a promising technology for oxygen generation with high efficiency. The key challenge for CLAS is to design robust oxygen sorbents with suitable redox properties and fast redox kinetics. In this work, perovskite-structured Sr 1-x Ca x Fe 1-y Co y O 3 oxygen sorbents were investigated and demonstrated for oxygen production with tunable redox properties, high redox rate, and excellent thermal/steam stability. Cobalt doping at B site was found to be highly effective, 33% improvement in oxygen productivity was observed at 500 °C. Moreover, it stabilizes the perovskite structure and prevents phase segregation under pressure swing conditions in the presence of steam. Scalable synthesis of Sr 0.8 Ca 0.2 Fe 0.4 Co 0.6 O 3 oxygen sorbents was carried out through solid state reaction, co-precipitation, and sol-gel methods. Both co-precipitation and sol-gel methods are capable of producing Sr 0.8 Ca 0.2 Fe 0.4 Co 0.6 O 3 sorbents with satisfactory phase purity, high oxygen capacity, and fast redox kinetics. Large scale evaluation of Sr 0.8 Ca 0.2 Fe 0.4 Co 0.6 O 3 , using an automated CLAS testbed with over 300 g sorbent loading, further demonstrated the effectiveness of the oxygen sorbent to produce 95% pure O 2 with a satisfactory productivity of 0.04 g O2 g sorbent −1 h −1 at 600 °C.

25 ENERGY STORAGE↗
DOE OSTI2023

Ti-6Al-4V to over 1.2 TPa: Shock Hugoniot experiments, ab initio calculations, and a broad-range multiphase equation of state

Titanium alloys are used in a large array of applications. In this work we focus our attention on the most used alloy, Ti-6Al-4V (Ti64), which has excellent mechanical and biocompatibility properties with applications in aerospace, defense, biomedical, and other fields. Here we present high-fidelity experimental shock compression data measured on Sandia’s Z machine. We extend the principal shock Hugoniot for Ti64 to more than threefold compression, up to over 1.2 TPa. We use the data to validate our ab initio molecular dynamics simulations and to develop a highly reliable, multiphase equation of state (EOS) for Ti64, spanning a broad range of temperature and pressures. The first-principles simulations show very good agreement with Z data and with previous three-stage gas gun data from Sandia’s STAR facility. The resulting principal Hugoniot and the broad-range EOS and phase diagram up to 10 TPa and 10 5 K are suitable for use in shock experiments and in hydrodynamic simulations. The high-precision experimental results and high-fidelity simulations demonstrate that the Hugoniot of the Ti64 alloy is stiffer than that of pure Ti and reveal that Ti64 melts on the Hugoniot at a significantly lower pressure and temperature than previously modeled.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

In Situ Analysis of Electron-Induced Chemical Transformations in Vapor-Phase-Synthesized Al-Based Inorganic–Organic Hybrid Thin Films for EUV Resist Platform

The rapid advancement and stringent requirements of extreme ultraviolet (EUV) lithography technology necessitate the development of advanced photoresist systems for next-generation microelectronics. Recent studies have demonstrated that inorganic-based hybrid photoresists offer notable improvements in EUV sensitivity, etch resistance, and greater insusceptibility to pattern collapse compared to their purely organic counterparts. However, variations in the synthesis/coating approaches and chemistry of inorganic–organic photoresists can result in distinct exposure mechanisms. In this work, an Al-based hybrid thin film resist system synthesized via molecular (atomic) layer deposition (MLD or MALD) is explored, focusing on its electron-beam and EUV patterning mechanisms. The Al-based hybrid thin films are deposited using trimethylaluminum (TMA) and the organic precursor hydroquinone, exhibiting a saturated growth rate within the temperature range of 150–200°C. In diluted tetramethylammonium hydroxide (TMAH)-based developer solutions, the electron-irradiated Al-based hybrid thin film system behaves as a negative tone resist, achieving a sensitivity of 10.4 mC/cm 2 at 0.1 kV electron beam lithography (EBL). Chemical changes induced by electron exposure are also analyzed in this study using X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, and a unique infrared spectroscopy setup, revealing the potential cross-linking pathways. To further correlate the electron-induced chemical transformations with those mediated by EUV irradiations, a combination of X-ray photoemission electron microscopy/low-energy electron microscopy (XPEEM/LEEM) system is also employed. In conclusion, this study provides critical insights into the mechanisms underlying solubility switching and contributes to the design of advanced resist materials for EUV lithography.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Large Enhancements in Optical and Piezoelectric Properties in Ferroelectric Zn 1- x Mg x O Thin Films through Engineering Electronic and Ionic Anharmonicities

Multifunctionality as a paradigm requires materials exhibiting multiple superior properties. Integrating second-order optical nonlinearity and large bandgap with piezoelectricity can, for example, enable broadband, strain-tunable photonics. Though very different phenomena at distinct frequencies, both second-order optical nonlinearity and piezoelectricity are third-rank polar tensors present only in acentric crystal structures. However, simultaneously enhancing both phenomena is highly challenging since it involves competing effects with tradeoffs. Recently, a large switchable ferroelectric polarization of ≈80 μC cm –2 was reported in Zn 1-x Mg x O films. Here, ferroelectric Zn 1-x Mg x O is demonstrated to be a platform that hosts simultaneously a 30% increase in the electronic bandgap, a 50% enhancement in the second harmonic generation (SHG) coefficients, and a near 200% improvement in the piezoelectric coefficients over pure ZnO. These enhancements are shown to be due to a 400% increase in the electronic anharmonicity and a ≈200% decrease in the ionic anharmonicity with Mg substitution. Precisely controllable periodic ferroelectric domain gratings are demonstrated down to 800 nm domain width, enabling ultraviolet quasi-phase-matched optical harmonic generation as well as domain-engineered piezoelectric devices.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Rethinking radiation effects in materials science using the plasma-focused ion beam

This work demonstrates the viability of using a plasma-focused ion beam (PFIB) as a new platform to carry out radiation effects studies in solids. While materials subjected to irradiation in either nuclear reactors or energetic particle accelerators experience limitations with respect to inaccuracies in both flux measurements and lack of precise control of irradiation areas, we demonstrate a new irradiation technique that allows the exposure of a single specimen in multiple areas, at multiple doses, and in site-specific dependencies - all with flux variations on the order of only 1%. This versatile technique also allows materials to be exposed to significantly higher irradiation dose rates than conventional accelerators. To validate the new methodology, we selected the classical example of ion-beam-induced amorphization of pure single-crystal Si. By pioneering the use of the PFIB for radiation effects studies in materials science, we were able to exploit, in both micro- and nanometer-sized detail, the differences in electron image contrast arising from crystalline versus amorphous solid-state phases in classical semiconductors subjected to irradiation, thus providing new insights on amorphization mechanisms. This methodology opens new research frontiers at the fringe of materials science with promising applications beyond the scope of materials at extremes such as in nanopatterning, nanodevices and nanoarchitectonics.

36 MATERIALS SCIENCE↗