Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “performance gain”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Application of intersatellite links to domestic satellite systems

The results of a study on intersatellite link (ISL) applications for domestic satellite communications are presented. It was determined if any technical, economic, or performance benefits could be gained by introducing intersatellite links into a domestic satellite communication network. Several key systems issues of domestic ISL's are addressed. These include the effect of a skewed traffic distribution on the selection of ISL satellite orbit locations, tolerable satellite spacing, and crosslink traffic-handling requirements. An ISL technology assessment is made by performing a parametric link analysis for several microwave and optical implementations. The impact of the crosslink on the end-to-end link performance is investigated for both regenerative and nonregenerative ISL architectures. A comparison is made between single satellite systems operating at C-, and Ku-bands and the corresponding ISL systems in terms of ground segment cost, space segment cost, and net link performance. Results indicate that ISL's can effectively expand the CONUS orbital arc, with a 60 GHz ISL implementation being the most attractive.

Ponchak, D. S.↗
NASA NTRS1986

Application of intersatellite links to domestic satellite systems

The results of a study on intersatellite link (ISL) applications for domestic satellite communications are presented. It was determined if any technical, economic, or performance benefits could be gained by introducing intersatellite links into a domestic satellite communication network. Several key systems issues of domestic ISL's are addressed. These include the effect of a skewed traffic distribution on the selection of ISL satellite orbit locations, tolerable satellite spacing, and crosslink traffic-handling requirements. An ISL technology assessment is made by performing a parametric link analysis for several microwave and optical implementations. The impact of the crosslink on the end-to-end link performance is investigated for both regenerative and nonregenerative ISL architectures. A comparison is made between single satellite systems operating at C-, and Ku-bands and the corresponding ISL systems in terms of ground segment cost, space segment cost, and net link performance. Results indicate that ISL's can effectively expand the CONUS orbital arc, with a 60 GHz ISL implementation being the most attractive.

Ponchak, D. S.↗
DOE OSTI2022

Semantic Property Graph for Scalable Knowledge Graph Analytics

Graphs are a natural and fundamental representation to describe entities, relationships, activities, and evolution of complex systems. Many domains such as communication, citation, procurement, biology, social media, and transportation can be modeled as a set of entities and their relationships. Resource Description Framework (RDF) and Labeled Property Graph (LPG) are two of the most used data models to encode information in a graph. Both models are similar in terms of using basic graph elements such as nodes and edges but differ in terms of the modeling approach, expressibility, serialization, and target applications. RDF is a flexible data exchange model for expressing information about entities but it tends to a have high memory footprint and inefficient storage, which does not make it a natural choice to perform scalable graph analytics. In contrast, LPG has gained traction as a reliable model to perform scalable graph analytic tasks such as sub-graph matching, network alignment, and real-time knowledge graph query. It provides efficient storage, fast traversal, and flexibility to model various real-world domains. At the same time, the LPG lacks the support of a formal knowledge representation such as an ontology to provide automated knowledge inference. We propose Semantic Property Graph (SPG) as a logical projection of reified RDF into the LPG model. SPG continues to use RDF ontology to define the type hierarchy of the projected graph and validate it against a given ontology. We present a framework to convert reified RDF graphs into SPG using two different computing environments. We also present cloud-based graph migration capabilities using Amazon Web Services.

Purohit, Sumit↗
DOE OSTI2021

Big Data Analysis of Massive PMU Datasets: A Data Platform Perspective

The discovery of `event signatures' and useful insights from very large historical Phasor Measurement Unit (PMU) datasets is predicated on offline Big Data analysis approaches that rely on the generation of predictive features on a massive scale. This paper presents lessons learned from a data platform perspective towards reducing barriers to adoption of Big Data analytics against a real dataset of almost half a trillion data points drawn from over 400 PMUs distributed across the North American power grid. We demonstrate software abstractions and targeted performance optimizations that can lead to significant productivity gains for power systems researchers seeking to perform offline exploratory temporal analysis and modeling tasks, with a focus on feature generation. We describe how our optimized approach goes beyond a naive application of mainstream Big Data technologies, enabling feature generation tasks, that previously took days or even weeks, to now be completed in just a few hours.

Kumar, Vijay S.↗
NASA NTRS1989

Application of optimal control theory to the design of the NASA/JPL 70-meter antenna servos

The application of Linear Quadratic Gaussian (LQG) techniques to the design of the 70-m axis servos is described. Linear quadratic optimal control and Kalman filter theory are reviewed, and model development and verification are discussed. Families of optimal controller and Kalman filter gain vectors were generated by varying weight parameters. Performance specifications were used to select final gain vectors.

Alvarez, L. S.↗
DOE OSTI2023

CSPlib: A performance portable parallel software toolkit for analyzing complex kinetic mechanisms

Computational singular perturbation (CSP) is a method to analyze dynamical systems. It targets the decoupling of fast and slow dynamics using an alternate linear expansion of the right-hand side of the governing equations based on eigenanalysis of the associated Jacobian matrix. This representation facilitates diagnostic analysis, detection and control of stiffness, and the development of simplified models. For this work, we have implemented CSP in a C++ open-source library CSPlib using the Kokkos parallel programming model to address portability across diverse heterogeneous computing platforms, i.e., multi/many-core CPUs and GPUs. We describe the CSPlib implementation and present its computational performance across different computing platforms using several test problems. Specifically, we test the CSPlib performance for a constant pressure ignition reactor model on different architectures, including IBM Power 9, Intel Xeon Skylake, and NVIDIA V100 GPU. The size of the chemical kinetic mechanism is varied in these tests. As expected, the Jacobian matrix evaluation, the eigensolution of the Jacobian matrix, and matrix inversion are the most expensive computational tasks. When considering the higher throughput characteristic of GPUs, GPUs performs better for small matrices with higher occupancy rate. CPUs gain more advantages from the higher performance of well-tuned and optimized linear algebra libraries such as OpenBLAS.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Modulating Energy Level on an A‐D‐A′‐D‐A‐Type Unfused Acceptor by a Benzothiadiazole Core Enables Organic Solar Cells with Simple Procedure and High Performance

Unfused‐ring acceptors (UFAs) have gained considerable research attention as they offer simple chemical structures through simplified synthesis methods, which would boost the commercialization of organic solar cells (OSCs). Recently, a new small molecule acceptor (SMA) named Y6 was reported, yielding high‐performance OSCs. Herein, the Y6‐like A‐DA′D‐A framework is developed to A‐D‐A′‐D‐A‐type backbone adopted in constructing UFAs. Two new Y6‐like UFAs are synthesized within four steps and the effect of noncovalent atoms at the central electron‐deficient core on material properties and device performances is studied. It is found that the introduction of fluorine atoms can bring larger red‐shift in the absorption spectra and better aggregation of the resulting UFA film states compared with those of oxygen atoms. Interestingly, the variations in the noncovalent interaction atoms induce different intermolecular charge transfer between donors and UFAs. When blended with another economical donor, PTQ10, F substitution at the benzothiadiazole ring is more effective than O substitution, leading to the increased short‐circuit current density ( J SC ) and higher efficiency of over 12%, among the best performances of UFA‐based OSCs. This contribution demonstrates the appropriate introduction of noncovalent interaction is a promising method for tuning energy levels, absorption, and aggregation of UFAs for high‐performance OSCs.

Yu, Han↗
NASA NTRS1988

Benchmarking and performance analysis of the CM-2

A suite of benchmarking routines testing communication, basic arithmetic operations, and selected kernel algorithms written in LISP and PARIS was developed for the CM-2. Experiment runs are automated via a software framework that sequences individual tests, allowing for unattended overnight operation. Multiple measurements are made and treated statistically to generate well-characterized results from the noisy values given by cm:time. The results obtained provide a comparison with similar, but less extensive, testing done on a CM-1. Tests were chosen to aid the algorithmist in constructing fast, efficient, and correct code on the CM-2, as well as gain insight into what performance criteria are needed when evaluating parallel processing machines.

Myers, David W.↗
NASA NTRS1992

Noise-optimal control of HEMT LNA's for compensation of temperature deviations

Noise-optimal control of high-electron mobility transistor low noise amplifier (HEMT LNA) bias voltage and current values was achieved at room temperature. The performance metric maximized was the amplifier gain divided by the amplifier input noise temperature, G/T(sub e). Additionally, the feasibility of automating the initial determination of bias settings was demonstrated in the laboratory. Simulation models of an HEMT were developed from available measurement data, installed on a Sun SPARC 1 workstation, and used in investigating several optimization algorithms. Simple tracking-type algorithms, which follow changes in optimum settings if started at or near the global optimum point, produced the best performance. Implementation of the optimization algorithms was performed using a three-stage Field Effect Transistor (FET) LNA and an existing test apparatus. Software was written to control the bias settings of the first stage of the LNA and to perform noise and gain measurements by using the test apparatus. The optimization control was then integrated with existing test software to create a master test and optimization program for test apparatus use.

Maccarley, C.↗
NASA NTRS1994

Novel high-gain, improved-bandwidth, finned-ladder V-band Traveling-Wave Tube slow-wave circuit design

The V-band frequency range of 59-64 GHz is a region of the millimeter-wave spectrum that has been designated for inter-satellite communications. As a first effort to develop a high-efficiency V-band Traveling-Wave Tube (TWT), variations on a ring-plane slow-wave circuit were computationally investigated to develop an alternative to the more conventional ferruled coupled-cavity circuit. The ring-plane circuit was chosen because of its high interaction impedance, large beam aperture, and excellent thermal dissipation properties. Despite these advantages, however, low bandwidth and high voltage requirements have, until now, prevented its acceptance outside the laboratory. In this paper, the three-dimensional electrodynamic simulation code MAFIA (solution of MAxwell's Equation by the Finite-Integration-Algorithm) is used to investigate methods of increasing the bandwidth and lowering the operating voltage of the ring-plane circuit. Calculations of frequency-phase dispersion, beam on-axis interaction impedance, attenuation and small-signal gain per wavelength were performed for various geometric variations and loading distributions of the ring-plane TWT slow-wave circuit. Based on the results of the variations, a circuit termed the finned-ladder TWT slow-wave circuit was designed and is compared here to the scaled prototype ring-plane and a conventional ferruled coupled-cavity TWT circuit over the V-band frequency range. The simulation results indicate that this circuit has a much higher gain, significantly wider bandwidth, and a much lower voltage requirement than the scaled ring-plane prototype circuit, while retaining its excellent thermal dissipation properties. The finned-ladder circuit has a much larger small-signal gain per wavelength than the ferruled coupled-cavity circuit, but with a moderate sacrifice in bandwidth.

Kory, Carol L.↗
NASA NTRS2014

Application and Evaluation of Control Modes for Risk-Based Engine Performance Enhancements

The engine control system for civil transport aircraft imposes operational limits on the propulsion system to ensure compliance with safety standards. However, during certain emergency situations, aircraft survivability may benefit from engine performance beyond its normal limits despite the increased risk of failure. Accordingly, control modes were developed to improve the maximum thrust output and responsiveness of a generic high-bypass turbofan engine. The algorithms were designed such that the enhanced performance would always constitute an elevation in failure risk to a consistent predefined likelihood. This paper presents an application of these risk-based control modes to a combined engine/aircraft model. Through computer and piloted simulation tests, the aim is to present a notional implementation of these modes, evaluate their effects on a generic airframe, and demonstrate their usefulness during emergency flight situations. Results show that minimal control effort is required to compensate for the changes in flight dynamics due to control mode activation. The benefits gained from enhanced engine performance for various runway incursion scenarios are investigated. Finally, the control modes are shown to protect against potential instabilities during propulsion-only flight where all aircraft control surfaces are inoperable.

emergency operation↗
NASA NTRS2014

Application and Evaluation of Control Modes for Risk-Based Engine Performance Enhancements

The engine control system for civil transport aircraft imposes operational limits on the propulsion system to ensure compliance with safety standards. However, during certain emergency situations, aircraft survivability may benefit from engine performance beyond its normal limits despite the increased risk of failure. Accordingly, control modes were developed to improve the maximum thrust output and responsiveness of a generic high-bypass turbofan engine. The algorithms were designed such that the enhanced performance would always constitute an elevation in failure risk to a consistent predefined likelihood. This paper presents an application of these risk-based control modes to a combined engine/aircraft model. Through computer and piloted simulation tests, the aim is to present a notional implementation of these modes, evaluate their effects on a generic airframe, and demonstrate their usefulness during emergency flight situations. Results show that minimal control effort is required to compensate for the changes in flight dynamics due to control mode activation. The benefits gained from enhanced engine performance for various runway incursion scenarios are investigated. Finally, the control modes are shown to protect against potential instabilities during propulsion-only flight where all aircraft control surfaces are inoperable.

aircraft engine performance↗
NASA NTRS2015

Application and Evaluation of Control Modes for Risk-Based Engine Performance Enhancements

The engine control system for civil transport aircraft imposes operational limits on the propulsion system to ensure compliance with safety standards. However, during certain emergency situations, aircraft survivability may benefit from engine performance beyond its normal limits despite the increased risk of failure. Accordingly, control modes were developed to improve the maximum thrust output and responsiveness of a generic high-bypass turbofan engine. The algorithms were designed such that the enhanced performance would always constitute an elevation in failure risk to a consistent predefined likelihood. This paper presents an application of these risk-based control modes to a combined engine/aircraft model. Through computer and piloted simulation tests, the aim is to present a notional implementation of these modes, evaluate their effects on a generic airframe, and demonstrate their usefulness during emergency flight situations. Results show that minimal control effort is required to compensate for the changes in flight dynamics due to control mode activation. The benefits gained from enhanced engine performance for various runway incursion scenarios are investigated. Finally, the control modes are shown to protect against potential instabilities during propulsion-only flight where all aircraft control surfaces are inoperable.

emergency operation↗
NASA NTRS1998

Redesign of a Variable-Gain Output Feedback Longitudinal Controller Flown on the High-Alpha Research Vehicle (HARV)

This paper describes a redesigned longitudinal controller that flew on the High-Alpha Research Vehicle (HARV) during calendar years (CY) 1995 and 1996. Linear models are developed for both the modified controller and a baseline controller that was flown in CY 1994. The modified controller was developed with three gain sets for flight evaluation, and several linear analysis results are shown comparing the gain sets. A Neal-Smith flying qualities analysis shows that performance for the low- and medium-gain sets is near the level 1 boundary, depending upon the bandwidth assumed, whereas the high-gain set indicates a sensitivity problem. A newly developed high-alpha Bode envelope criterion indicates that the control system gains may be slightly high, even for the low-gain set. A large motion-base simulator in the United Kingdom was used to evaluate the various controllers. Desired performance, which appeared to be satisfactory for flight, was generally met with both the low- and medium-gain sets. Both the high-gain set and the baseline controller were very sensitive, and it was easy to generate pilot-induced oscillation (PIO) in some of the target-tracking maneuvers. Flight target-tracking results varied from level 1 to level 3 and from no sensitivity to PIO. These results were related to pilot technique and whether actuator rate saturation was encountered.

Ostroff, Aaron J.↗
DOE OSTI2022

SchedInspector: A Batch Job Scheduling Inspector Using Reinforcement Learning

Improving the performance of job executions is an important goal of HPC batch job schedulers, such as minimizing job waiting time, slowdown, or completion time. Such a goal is often accomplished using carefully designed heuristics based on job features, such as job size and job duration. However, these heuristics overlook important runtime factors (e.g., cluster availability and waiting job patterns), which may vary across time and make a previously sound scheduling decision not hold any longer. In this study, we propose a new approach to incorporate runtime factors into batch job scheduling for better job execution performance. The key idea is to add a scheduling inspector on top of the base job scheduler to scrutinize its scheduling decisions. The inspector will take the runtime factors into consideration and accordingly determine the fitness of the scheduled job. It then either accepts the scheduled job or rejects it and asks the base schedulers to try again later. We realize such an inspector, namely SchedInspector, by leveraging the intelligence of reinforcement learning. Through extensive experiments, we show SchedInspector can intelligently integrate the runtime factors into various batch job scheduling policies, including the state-of-the-art one, to gain better job execution performance, such as smaller average bounded job slowdown (up to 69% better) or average job waiting time (up to 52% better), across various real-world workloads. We also show that although rejecting scheduling decisions may leave the resources idle hence affect the system utilization, SchedInspector is able to achieve the job execution performance improvement with marginal impact on the system utilization (typically less than 1%). We consider one key advantage of SchedInspector is it automatically learns to work with and improve existing job scheduling policies without changing them, which makes it promising to serve as a generic enhancer for various batch job scheduling policies.

Zhang, Di↗
NASA NTRS1984

Application of transonic codes to aeroelastic modeling of airfoils including active controls

A study is performed using aeroelastic modeling to investigate the stability behavior of airfoils in small-disturbance transonic flow. Two conventional airfoils, NACA 64.A006 and NACA 64A010, and a supercritical airfoil, MBB A-3, are considered. Three sets of unsteady aerodynamic data are computed using three different transonic codes (LTRAN2-NLR, LTRAN2-HI, and USTS) for comparison purposes. Stability results obtained using a constant matrix, state-space, aeroelastic model are presented in a root-locus format. Use of the state-space model is demonstrated through application to flutter suppression using active controls. Aeroelastic effects due to simple, constant gain, partial feedback, control laws that utilize displacement, velocity, and acceleration sensing are studied using a variety of control gains. Calculations are also performed using linear subsonic aerodynamic theory to reveal the differences between including and not including transonic effects in the aeroelastic model. Aeroelastic stability behavior of these airfoils is physically interpreted and discussed in detail.

Batina, J. T.↗
DOE OSTI2020

The Kokkos Ecosystem [Brief]

In 2016/2017, the field of High-Performance Computing (HPC) entered a new era driven by fundamental physics challenges to produce ever more energy and cost-efficient processors. Since the convergence on the Message-Passing Interface (MPI) standard in the mid-1990s, application developers enjoyed a seemingly static view of the underlying machine — that of a distributed collection of homogeneous nodes executing in collaboration. However, after almost two decades of dominance, the sole use of MPI to derive parallelism acted as a limiter to improved future performance. While MPI is widely expected to continue to function as the basic mechanism for communication between compute nodes for the immediate future, additional parallelism is required on the computing node itself if high performance and efficiency goals are to be realized. When reviewing the architectures of the top HPC systems today, the change in paradigm is clear: the compute nodes of the leading machines in the world are either powered by many-core chips with a few dozen cores each, or use heterogeneous designs, where traditional CPUs marshal work to massively parallel compute accelerators which has as many as 200,000 processing threads in flight simultaneously. Complicating matters further for application developers, each processor vendor has its own preferred way of writing code for their architecture.The Kokkos EcoSystem was released by Sandia in 2017 to address this new era in HPC system design by providing a vendor independent performance portable programming system for scientific, engineering, and mathematical software applications written in the C++ programming language. Using Kokkos, application developers can be more productive because they will not have to create and maintain separate versions of their software for each architecture, nor will they have to be experts in each architecture's peculiar requirements. Instead, they will have a single method of programming for the diverse set of modern HPC architectures. While Kokkos started in 2011 as a programming model only, it soon became clear that complex applications needed more. It is also critical to have a portable mathematical functions and developers need tools to debug their applications, gain insight into the performance characteristics of their codes and tune algorithm performance parameters through automated processes. The Kokkos EcoSystem addresses those needs through its three main components: the Kokkos Core programming model, the Kokkos Kernels math library, and the Kokkos Tools project.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS2001

Pre-Hardware Optimization of Spacecraft Image Processing Software Algorithms and Hardware Implementation

Spacecraft telemetry rates have steadily increased over the last decade presenting a problem for real-time processing by ground facilities. This paper proposes a solution to a related problem for the Geostationary Operational Environmental Spacecraft (GOES-8) image processing application. Although large super-computer facilities are the obvious heritage solution, they are very costly, making it imperative to seek a feasible alternative engineering solution at a fraction of the cost. The solution is based on a Personal Computer (PC) platform and synergy of optimized software algorithms and re-configurable computing hardware technologies, such as Field Programmable Gate Arrays (FPGA) and Digital Signal Processing (DSP). It has been shown in [1] and [2] that this configuration can provide superior inexpensive performance for a chosen application on the ground station or on-board a spacecraft. However, since this technology is still maturing, intensive pre-hardware steps are necessary to achieve the benefits of hardware implementation. This paper describes these steps for the GOES-8 application, a software project developed using Interactive Data Language (IDL) (Trademark of Research Systems, Inc.) on a Workstation/UNIX platform. The solution involves converting the application to a PC/Windows/RC platform, selected mainly by the availability of low cost, adaptable high-speed RC hardware. In order for the hybrid system to run, the IDL software was modified to account for platform differences. It was interesting to examine the gains and losses in performance on the new platform, as well as unexpected observations before implementing hardware. After substantial pre-hardware optimization steps, the necessity of hardware implementation for bottleneck code in the PC environment became evident and solvable beginning with the methodology described in [1], [2], and implementing a novel methodology for this specific application [6]. The PC-RC interface bandwidth problem for the class of applications with moderate input-output data rates but large intermediate multi-thread data streams has been addressed and mitigated. This opens a new class of satellite image processing applications for bottleneck problems solution using RC technologies. The issue of a science algorithm level of abstraction necessary for RC hardware implementation is also described. Selected Matlab functions already implemented in hardware were investigated for their direct applicability to the GOES-8 application with the intent to create a library of Matlab and IDL RC functions for ongoing work. A complete class of spacecraft image processing applications using embedded re-configurable computing technology to meet real-time requirements, including performance results and comparison with the existing system, is described in this paper.

Kizhner, Semion↗