Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “pair distribution function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Stability, Composition, and Core-Shell Particle Structure of Uranium(IV)-Silicate Colloids

Uranium is typically the most abundant radionuclide by mass in radioactive wastes and is a significant component of effluent streams at nuclear facilities. Actinide(IV) (An(IV)) colloids formed via various pathways, including corrosion of spent nuclear fuel, have the potential to greatly enhance the mobility of poorly soluble An(IV) forms, including uranium. This is particularly important in conditions relevant to decommissioning of nuclear facilities and the geological disposal of radioactive waste. Previous studies have suggested that silicate could stabilize U(IV) colloids. Here the formation, composition, and structure of U(IV)-silicate colloids under the alkaline conditions relevant to spent nuclear fuel storage and disposal were investigated using a range of state of the art techniques. The colloids are formed across a range of pH conditions (9-10.5) and silicate concentrations (2-4 mM) and have a primary particle size 1-10 nm, also forming suspended aggregates <220 nm. X-ray absorption spectroscopy, ultrafiltration, and scanning transmission electron microscopy confirm the particles are U(IV)-silicates. Additional evidence from X-ray diffraction and pair distribution function data suggests the primary particles are composed of a UO2-rich core and a U-silicate shell. U(IV)-silicate colloids formation correlates with the formation of U(OH)3(H3SiO4)3 2- complexes in solution indicating they are likely particle precursors. Finally, these colloids form under a range of conditions relevant to nuclear fuel storage and geological disposal of radioactive waste and represent a potential pathway for U mobility in these systems.

Neill, Thomas↗

Short-Range Order in VI 3

We present a detailed investigation of the crystal structure of VI 3 , a two-dimensional van der Waals material of interest for studies of low-dimensional magnetism. As opposed to the average crystal structure that features $R\bar{3}$ symmetry of the unit cell, our Raman scattering and X-ray atomic pair distribution function analysis supported by density functional theory calculations point to the coexistence of short-range ordered $P\bar{3}$1c and long-range ordered $R\bar{3}$phases. The highest-intensity peak, A 1g 3 , exhibits a moderate asymmetry that might be traced back to the spin–phonon interactions, as in the case of CrI 3 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural Insights into the Vapochromic Behavior of Pt- and Pd-Based Compounds

Anionic complexes having vapochromic behavior are investigated: [K(H 2 O)][M(ppy)(CN) 2 ], [K(H 2 O)][M(bzq)(CN) 2 ], and [Li(H 2 O) n ][Pt(bzq)(CN) 2 ], where ppy = 2-phenylpyridinate, bzq = 7,8-benzoquinolate, and M = Pt(II) or Pd(II). These hydrated potassium/lithium salts exhibit a change in color upon being heated to 380 K, and they transform back into the original color upon absorption of water molecules from the environment. The challenging characterization of their structure in the vapochromic transition has been carried out by combining several experimental techniques, despite the availability of partially ordered and/or impure crystalline material. Room-temperature single-crystal and powder X-ray diffraction investigation revealed that [K(H 2 O)][Pt(ppy)(CN) 2 ] crystallizes in the Pbca space group and is isostructural to [K(H 2 O)][Pd(ppy)(CN) 2 ]. Variable-temperature powder X-ray diffraction allowed the color transition to be related to changes in the diffraction pattern and the decrease in sample crystallinity. Water loss, monitored by thermogravimetric analysis, occurs in two stages, well separated for potassium Pt compounds and strongly overlapped for potassium Pd compounds. Furthermore, the local structure of potassium compounds was monitored by in situ pair distribution function (PDF) measurements, which highlighted changes in the intermolecular distances due to a rearrangement of the crystal packing upon vapochromic transition.

36 MATERIALS SCIENCE↗

The Role of Phonons and Oxygen Vacancies in Non-Cubic SrVO 3

Combining neutron diffraction with pair distribution function analysis, we have uncovered hidden reduced symmetry in the correlated metallic d 1 perovskite, SrVO 3 . Specifically, we show that both the local and global structures are better described using a GdFeO 3 distorted (orthorhombic) model as opposed to the ideal cubic ABO 3 perovskite type. Recent reports of imaginary phonon frequencies in the density functional theory (DFT)-calculated phonon dispersion for cubic SrVO 3 suggest a possible origin of this observed non-cubicity. Namely, the imaginary frequencies computed could indicate that the cubic crystal structure is unstable at T = 0 K. However, our DFT calculations provide compelling evidence that point defects in the form of oxygen vacancies, and not an observable symmetry breaking associated with calculated imaginary frequencies, primarily result in the observed non-cubicity of SrVO 3 . These experimental and computational results are broadly impactful because they reach into the thin-film and theoretical communities who have shown that SrVO 3 is a technologically viable transparent conducting oxide material and have used SrVO 3 to develop theoretical methods, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In Situ Visualization of Local Distortions in the High- T c Molecule-Intercalated Li x (C 5 H 5 N) y Fe 2– z Se 2 Superconductor

A time-resolved synchrotron X-ray total scattering study sheds light on the evolution of the different structural length scales involved during the intercalation of the layered iron–selenide host by organic molecular donors, aiming at the formation of the expanded-lattice Li x (C 5 H 5 N) y Fe 2– z Se 2 hybrid superconductor. The intercalates are found to crystallize in the tetragonal ThCr 2 Si 2 -type structure at the average level, however, with an enhanced interlayer iron–selenide spacing ( d = 16.2 Å) that accommodates the heterocyclic molecular spacers. Quantitative atomic pair distribution function (PDF) analysis at variable times suggests distorted FeSe 4 tetrahedral local environments that appear swollen with respect to those in the parent β-FeSe. Simultaneously acquired in situ synchrotron X-ray powder diffraction data disclose that secondary phases (α-Fe and Li 2 Se) grow significantly when a higher lithium concentration is used in the solvothermal reaction or when the solution is aged. These observations are in line with the strongly reducing character of the intercalation medium’s solvated electrons that mediate the defect chemistry of the expanded-lattice superconductor. In the latter, intralayer correlated local distortions indicate electron-donating aspects that reflect in somewhat enlarged Fe–Se bonds. Additionally, they also reveal a degree of relief of chemical pressure associated with a large distance between Fe and Se sheets (“taller” anion height) and a stretched Fe–Fe square planar topology. The elongation of the latter, derived from the in situ PDF study, speaks for a plausible increase in the Fe-site vacancy concentration. The evolution of the local structural parameters suggests an optimum reaction window where kinetically stabilized phases resemble the distortions of the edge-sharing Fe–Se tetrahedra, required for a high- T c in expanded-lattice iron-chalcogenides.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Cation Short-Range Ordering of MgAl 2 O 4 and NiAl 2 O 4 Spinel Oxides at High Temperatures via In Situ Neutron Total Scattering

Complex oxides that adopt the isometric spinel structure (AB 2 O 4 ) are important for numerous technological applications and are relevant for certain geological processes, which involve exposure to extreme environments such as high pressures and temperatures. Recent studies have shown that the changes to the spinel structure caused by these environments are complex and depend on the material length scale under consideration. In this study we have expanded this approach to the behavior of spinels under high temperature. In situ neutron total scattering experiments, coupled with pair distribution function analysis, performed on two spinel compositions with various levels of pre-existing disorder (MgAl 2 O 4 and NiAl 2 O 4 ) revealed that both compositions trend to a state of maximum disorder where the A and B cations are randomly distributed amongst the two available sites. Temperature-induced cation inversion, conventionally understood as exchange of cations on the A and B sites, is locally expressed as an atomic rearrangement to a tetragonal symmetry, a correlation that is retained up to the maximum temperature studied (1000 °C). Furthermore, a complex thermal expansion behavior is revealed wherein the oxide materials expand heterogeneously at the level of coordination polyhedral with an apparent dependence on bond strength.

36 MATERIALS SCIENCE↗

Topological Transformation of a Metal–Organic Framework Triggered by Ligand Exchange

Metal-organic frameworks (MOFs) have shown to be unsuspectedly dynamic. Here we describe the topological interconversion of a new framework in the bio-MOF-100 family (dia-c) into the known isomer (lcs) by doubling the pore volume, which occurs during post-synthesis modifications. During this transformation, re-assembling of the MOF building blocks into a completely different framework occurs, involving breaking/forming of metal-ligand bonds. MOF crystallinity and local structure are retained, as determined by powder X-ray diffraction (PXRD) and pair distribution function (PDF) analyses, respectively. We have exploited the inherent dynamism of bio-MOF-100 by coupling chemical decorations of the framework using solvent-assisted ligand exchange (SALE) to the topological change. Following this method and starting from the pristine dense dia-c phase, open lcs-bio-MOF-100 was prepared and functionalized in-situ with an iridium complex (IrL). Alternatively, the dia-c MOF could be modified with wide-ranging amounts of IrL up to ca. 50 mol%, as determined by solution 1 H Nuclear Magnetic Resonance (NMR) spectroscopy, by tuning the concentration of the solutions used and with no evidence for isomer interconversion. The single-site nature of the iridium complexes within the MOFs was assessed by X-ray absorption spectroscopy (XAS) and PDF analyses. As a result, ligand exchanges occurred quantitatively at room temperature, with no need of excess of the iridium metallolinker.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Role of Structural and Compositional Heterogeneities in the Insulator-to-Metal Transition in Hole-Doped APd 3 O 4 (A = Ca, Sr)

The cubic semiconducting compounds APd 3 O 4 (A = Ca, Sr) can be hole-doped by Na substitution on the A site and driven toward more conducting states. This process has been followed here by a number of experimental techniques to understand the evolution of electronic properties. While an insulator-to-metal transition is observed in Ca 1–x Na x Pd 3 O 4 for x ≥ 0.15, bulk metallic behavior is not observed for Sr 1–x Na x Pd 3 O 4 up to x = 0.20. Given the very similar crystal and (calculated) electronic structures of the two materials, the distinct behavior is a matter of interest. We present evidence of local disorder in the A = Sr materials through the analysis of the neutron pair distribution function, which is potentially at the heart of the distinct behavior. Solid-state 23 Na nuclear magnetic resonance studies additionally suggest a percolative insulator-to-metal transition mechanism, wherein presumably small regions with a signal resembling metallic NaPd 3 O 4 form almost immediately upon Na substitution, and this signal grows monotonically with substitution. Here, some signatures of increased local disorder and a propensity for Na clustering are seen in the A = Sr compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Isotropic Low Thermal Expansion over a Wide Temperature Range in Ti 1– x Zr x F 3+ x (0.1 ≤ x ≤ 0.5) Solid Solutions

TiF 3 exhibits a rhombohedral to ReO 3 -type cubic phase transformation at ~340 K. Here we report that, by introducing ZrF 4 into TiF 3 , the cubic phase is stabilized at least down to 123 K in the Ti 1–x Zr x F 3+x compounds. All compounds exhibit low thermal expansion (LTE) between 123 and 623 K, and a nearly zero thermal expansion (ZTE) was obtained in Ti 0.7 Zr 0.3 F 3.3 (α L = 0.91 ppm/K). The analysis of pair distribution function reveals that the cation-centered octahedra are partially changed to pentagonal bipyramids in Ti 1–x Zr x F 3+x due to the excess fluorines relative to the case of TiF 3 . Therefore, the cooperative rotation of the polyhedra tends to be restricted, and the cubic phase is thus stabilized. The restrained polyhedral rotations compete against the lattice softening caused by the introduction of Zr 4+ , giving rise to the LTE. Lastly, our present strategy is applicable to other rhombohedral metal trifluorides for the design of new isotropic ZTE materials.

36 MATERIALS SCIENCE↗

KBKit: A Python Toolkit for Kirkwood–Buff Theory from Molecular Dynamics

Thermodynamic properties of liquid mixtures govern processes that range from drug delivery to energy storage, yet extracting these properties from molecular simulations remains challenging. Kirkwood–Buff (KB) theory offers a rigorous route by linking microscopic pair distribution functions to macroscopic free energies, but practical use of the theory has been hindered by two obstacles: (i) the long simulations needed to obtain well-converged Kirkwood-Buff integrals (KBIs) and (ii) the specialized corrections required to translate finite-size data to the thermodynamic limit. $\texttt{KBKit}$ is an open-source Python package that removes these barriers. It automatically computes KBIs and derived thermodynamic quantities from GROMACS input files, applies state-of-the-art finite-size corrections, and provides built-in diagnostic tools to quantify statistical uncertainty. Written with modern software-engineering practices—continuous integration, extensive unit testing, and thorough documentation—$\texttt{KBKit}$ is both reliable and easy to extend. By condensing complex KBI analysis into a few intuitive commands, $\texttt{KBKit}$ enables researchers to incorporate KB theory into routine simulation workflows and accelerate the discovery of solution-phase thermodynamics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Comparative CHARMM and AMOEBA Simulations of Lanthanide Hydration Energetics and Experimental Aqueous-Solution Structures

The accurate understanding of metal ion hydration in solutions is a prerequisite for predicting stability, reactivity, and solubility. Herein, additive CHARMM force field parameters were developed to enable molecular dynamics simulations of lanthanide (Ln) speciation in water. Quantitatively similar to the much more resource-intensive polarizable AMOEBA potential, the CHARMM simulations reproduce the experimental hydration free energies and correlations in the first shell (Ln-oxygen distance and hydration number). Comparisons of difference pair-distribution functions obtained from the two simulation approaches with those from high-energy X-ray scattering experiments reveal good agreement of first coordination sphere correlations for the Lu3+ ion (CHARMM only), but further improvement to both approaches is required to reproduce the broad, non-Gaussian distribution seen from the La3+ experiment. Second-coordination sphere comparisons demonstrate the importance of explicitly including an anion in the simulation. This work describes the usefulness of less resource-intensive additive potentials in some complex chemical systems such as solution environments where multiple interactions have similar energetics. In addition, 3-dimensional descriptions of the La3+ and Lu3+ coordination geometries are extracted from the CHARMM simulations and generally discussed in terms of potential improvements to solute-structure modeling within solution environments.

Qiao, Baofu↗

Superionic Phases of the 1:1 Water–Ammonia Mixture

We report four structures for the 1:1 water–ammonia mixture showing superionic behavior at high temperature with the space groups P 4/ nmm , Ima 2, Pma 2, and Pm , which have been identified from evolutionary random structure search calculations at 0 K. Analyzing the respective pair distribution functions and diffusive properties the superionic phase is found to be stable in a temperature range between 1000 and 6000 K for pressures up to 800 GPa. We propose a high-pressure phase diagram of the water–ammonia mixture for the first time and compare the self-diffusion coefficients in the mixture to the ones found in water and ammonia. Lastly, possible implications on the interior structure of the giant planets Uranus and Neptune are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Temperature Dependent Local Atomic Structure and Vibrational Dynamics of Barium Hydride and Calcium Hydride

Solid-state ionic conductors that exhibit pure ionic transport of hydride anions are rare. Here, we investigate two alkaline earth metal hydrides, barium hydride and calcium hydride, using neutron scattering techniques to understand how the local atomic environment plays a role in the diffusion of hydride ions. At high temperatures, barium hydride exhibits exceptional transport properties with ionic conductivities that are higher than those of many of the typical proton and oxide ion conductors in use today. Total neutron scattering and pair distribution function analysis reveal how a structural phase transition converts barium hydride from a modest ionic conductor into a fast ionic conductor through the introduction of disorder, deuterium site splitting, and dynamic structural fluctuations. Furthermore, neutron vibrational spectroscopy is employed to probe changes in the temperature evolution of the lattice dynamics and local energy landscape. These results improve our fundamental knowledge of the interplay between structure and dynamics governing a rare conduction process of hydride ions in solid-state materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure Evolution of Chemically Degraded ZIF-8

Exposure of the metal–organic zeolitic imidazolate framework-8 (ZIF-8) to humid SO x gas cleaves Zn–N bonds, leading to framework disorder and a corresponding decrease in pore accessibility. This work shows that framework disorder exhibits a critical behavior with respect to water concentration in the gas stream. While the quantity of sulfate adsorbed at Zn nodes is at or below the detection threshold for the X-ray pair distribution function technique, precluding direct observation of the adsorbate, powder diffraction reveals clear structural alterations. Here, the onset of linker cleavage correlates to a large microstrain that diminishes as framework disorder increases. Energy-dispersive X-ray spectroscopy shows that the sulfur distribution throughout representative grains is uniform, implying the structure transformation is homogeneously nucleated and not dependent upon gas diffusion kinetics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Additive Molar Volumes in Amorphous Ca/Sr Carbonate Solid Solutions

The development of predictive models of minor element incorporation in crystalline carbonate end products requires an understanding of the fundamental controls on metastable intermediate phase composition. In this study, we used small-angle X-ray scattering (SAXS), X-ray pair distribution function (PDF), thermogravimetric analysis (TGA), inductively coupled plasma mass spectrometry (ICP-MS), and transmission electron microscopy (TEM) to determine the composition-dependent density of an amorphous calcium–strontium carbonate (ACSC) solid solution. The amorphous calcium carbonate (ACC) and strontium carbonate (ASC) measured densities were ρ ACC = 2.19 ± 0.04 g/cm 3 and ρ ASC = 2.97 ± 0.05 g/cm 3 . Throughout our work, the experiments showed a dependence of the water content of the amorphous solid solution on the Sr mole fraction. An equation that relates the molar volume to the average cation radius, the carbonate ion radius, and the water volume was parameterized for hydrated crystalline carbonates and predicted well the molar volume of the ACSC solid solution. This finding indicates that, as for hydrated crystalline carbonates, the molar volumes of amorphous carbonates are additive and that water is a structural component of ACSC. Ab initio molecular dynamics (AIMD) simulations of the ACSC solid solutions showed strong linear correlations between calculated molar volumes and Sr and H 2 O contents, thus supporting the experimental results. In conclusion, our findings highlight the need to consider the full CaCO 3 –MeCO 3 –H 2 O ternary when quantifying metal cation incorporation in ACC.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Molecular Origins of Temperature-Dependent X-ray Absorption in YAG:Dy

The absorption and emission of X-rays in dysprosium-doped yttrium aluminum garnet (YAG:Dy) has produced unexpected thermographic behavior, which is investigated using a combination of finite temperature ab initio molecular dynamic simulations, structural characterization, and electronic structure calculations of X-ray characteristics. Calculated average peak X-ray absorption spectra (XAS) from simulations between 300 and 600 K result in peak intensity loss due to thermalization effects, matching experimentally measured behavior of YAG:Dy. Here, investigation of atomic snapshots indicates structural factors that correlated with the X-ray behavior, with the first Y–O coordination sphere identified as the primary structural feature unique to high XAS intensity as calculated by radial and pair distribution functions.

Ab initio molecular dynamics↗

Understanding Composition-Dependent Synergy of PtPd Alloy Nanoparticles in Electrocatalytic Oxygen Reduction Reaction

Gaining an insight into the relationship between the bimetallic composition and catalytic activity is essential for the design of nanoalloy catalysts for oxygen reduction reaction. This report describes findings of a study of the composition–activity relationship for PtPd nanoalloy catalysts in oxygen reduction reaction (ORR). Pt n Pd 100-n nanoalloys with different bimetallic compositions are synthesized by wet chemical method. While the size of the Pt 50 Pd 50 nanoparticles is the largest among the nanoparticles with different compositions, the characterization of the nanoalloys using synchrotron high-energy X-ray diffraction (HE-XRD) coupled to atomic pair distribution function (PDF) analysis reveals that the nanoalloy with an atomic Pt:Pd ratio of 50:50 exhibits an intermediate lattice parameter. Electrochemical characterization of the nanoalloys shows a minimum ORR activity at Pt:Pd ratio close to 50:50, whereas a maximum activity is achieved at Pt:Pd ratio close to 10:90. The composition–activity correlation is assessed by theoretical modeling based on DFT calculation of nanoalloy clusters. In addition to showing an electron transfer from PtPd alloy to oxygen upon its adsorption on the nanoalloy, a relatively large energy difference between HOMO for nanoalloy and LUMO for oxygen is revealed for the nanoalloy with an atomic Pt:Pd ratio of 50:50. By analysis of the adsorption of OH species on PtPd (111) surfaces of different compositions, the strongest adsorption energy is observed for Pt 96 Pd 105 (Pt:Pd ≈ 50:50) cluster, which is believed to be likely responsible for the reduced activity. Interestingly, the adsorption energy on Pt24Pd177 (Pt:Pd ≈ 10:90) cluster falls in between Pt 96 Pd 105 and Pd 201 clusters, which is believed to be linked to the observation of the highest catalytic activity for the nanoalloy with an atomic Pt:Pd ratio of 10:90. Furthermore, these findings have implications for the design of composition-tunable nanoalloy catalysts for ORR.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗