Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “oscillators”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

How a Large-Scale Deployment of Grid-Forming Inverters May Impact Inter-Area Oscillation Modes: An Investigation in the US Western Interconnection

This report describes work performed to evaluate the impact of high grid-forming (GFM) inverter penetration on the inter-area oscillation mode characteristics of the Western Interconnection. Using simulations, this work analyzes how: a) replacing fossil-fuel-based synchronous generators by GFM inverters will impact properties of the North-South mode, and b) replacing the Colstrip power plant by grid-following (GFL) and GFM inverters will change the characteristics of the Montana mode. Results obtained indicate that high penetration of GFM inverters will significantly alter inter-area oscillation characteristics in interconnections. Low frequency oscillations in the 0.11 Hz range will be predominantly driven by remaining synchronous machines, and hence their relative distribution in the interconnection will impact mode characteristics and observability.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2022

Theoretical Constraints on Neutron-Mirror-Neutron Oscillation

Mirror models lead to the possibility that neutron (n) can oscillate into its mirror partner (n′), inspiring several experimental searches for this phenomenon. The condition for observability of this oscillation is a high degree of degeneracy between the n and n′ masses, which can be guaranteed if there is exact parity symmetry taking all particles to their mirror partners. However, consistency of these models with big-bang nucleosynthesis requires that this parity symmetry be broken in the early universe in a scenario called asymmetric inflation. In this paper, we study the consistency of an observable n−n′ oscillations signal with asymmetric inflation and derive various theoretical constraints. In particular, we find that the reheat temperature after inflation should lie below 2.5 TeV, and we predict a singlet fermion with a mass below 100 GeV. In simple models, where the right-handed neutrino is a mediator of baryon-number-violating interactions, we find that the light neutrinos are Dirac fermions with their masses arising radiatively through one-loop diagrams.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Secular Eccentricity Oscillations in Axisymmetric Disks of Eccentric Orbits

Massive bodies undergo orbital eccentricity oscillations when embedded in an axisymmetric disk of smaller mass orbits. These eccentricity oscillations are driven by secular torques that seek to equalize the apsidal precession rates of all the orbits in the disk. We investigate this mechanism within the context of detached objects in the outer solar system, but we find that the oscillation timescale is too long for it to be dynamically important. It could however be interesting for phenomenon a bit farther from home, namely, feeding supermassive black holes and polluting the surfaces of white dwarf stars.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Potential Impact of Fast Flavor Oscillations on Neutrino-driven Winds and Their Nucleosynthesis

The wind driven by the intense neutrino emission from a protoneutron star (PNS) is an important site for producing nuclei heavier than the Fe group. Because of certain features in the neutrino angular distributions, the so-called fast flavor oscillations may occur very close to the PNS surface, effectively resetting the neutrino luminosities and energy spectra that drive the wind. Using the unoscillated neutrino emission characteristics from two core-collapse supernova simulations representative of relevant progenitors at the lower and higher mass end, we study the potential effects of fast flavor oscillations on neutrino-driven winds and their nucleosynthesis. We find that such oscillations can increase the total mass loss by factors up to ~1.5–1.7 and lead to significantly more proton-rich conditions. The latter effect can greatly enhance the production of 64 Zn and the so-called light p-nuclei 74 Se, 78 Kr, and 84 Sr. Implications for abundances in metal-poor stars, Galactic chemical evolution in general, and isotopic anomalies in meteorites are discussed.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1997

Brillouin Opto-Electronic Oscillator

We demonstrate an all optical Opto-Electronic Oscillator in which the Brillouin selective sideband amplification technique is used to provide a sufficient gain for the oscillator to start and sustain an electro-optic oscillation.

OEO electro-optic oscillation↗
NASA NTRS2005

Design and progress report for compact cryocooled sapphire oscillator 'VCSO'

We report on the development of a compact cryocooled sapphiere oscillator 'VCSO', designed as a higher-performance replacement for ultra-stable quartz oscillators in local oscillator, cleanup, and flywheel applications in the frequency generation and distribution subsystems of NASA's Deep Space Network (DSN).

oscillator↗
NASA NTRS2004

Local oscillator distribution using a geostationary satellite

A satellite communication system suitable for distribution of local oscillator reference signals for a widely spaced microwave array has been developed and tested experimentally. The system uses a round-trip correction method of the satellite This experiment was carried out using Telstar-5, a commercial Ku-band geostationary satellite. For this initial experiment, both earth stations were located at the same site to facilitate direct comparison of the received signals. The local oscillator reference frequency was chosen to be 300MHz and was sent as the difference between two Ku-band tones. The residual error after applying the round trip correction has been measured to be better than 3psec for integration times ranging from 1 to 2000 seconds. For integration times greater then 500 seconds, the system outperforms a pair of hydrogen masers with the limitation believed to be ground-based equipment phase stability. The idea of distributing local oscillators using a geostationary satellite is not new; several researchers experimented with this technique in the eighties, but the achieved accuracy was 3 to 100 times worse than the present results. Since substantially and the performance of various components has improved. An important factor is the leasing of small amounts of satellite communication bandwidth. We lease three 100kHz bands at approximately one hundredth the cost of a full 36 MHz transponder. Further tests of the system using terminal separated by large distances and comparison tests with two hydrogen masers and radio interferometry is needed.

hydrogen maser↗
NASA NTRS1999

Continuum Modeling of the Dynamics of Externally Injection-locked Coupled Oscillator Arrays

Mutually injection-locked arrays of electronic oscillators provide a novel means of controlling the aperture phase of a phased-array antenna, thus achieving the advantages of spatial power combining while retaining the ability to steer the radiated beam. In a number of design concepts, one or more of the oscillators are injection locked to a signal from an external master-oscillator. The behavior of such a system has been analyzed by numerical solution of a system of nonlinear differential equations which, due to its complexity, yields limited insight into the relationship between the injection signals and the aperture phase. In this paper, we develop a continuum model, which results in a single partial differential equation for the aperture phase as a function of time. Solution of the equation is effected by means of the Laplace transformation and yields detailed information concerning the dynamics of the array under the influence of the external injection signals.

injection locked↗
NASA NTRS2014

Stellar Laboratories II. New Zn Iv and Zn v Oscillator Strengths and Their Validation in the Hot White Dwarfs G191-B2B and RE0503-289

Context. For the spectral analysis of high-resolution and high-signal-to-noise (SN) spectra of hot stars, state-of-the-art non-local thermodynamic equilibrium (NLTE) model atmospheres are mandatory. These are strongly dependent on the reliability of the atomic data that is used for their calculation. In a recent analysis of the ultraviolet (UV) spectrum of the DA-type white dwarf G191B2B,21 Zn iv lines were newly identified. Because of the lack of Zn iv data, transition probabilities of the isoelectronic Ge vi were adapted for a first, coarse determination of the photospheric Zn abundance.Aims. Reliable Zn iv and Zn v oscillator strengths are used to improve the Zn abundance determination and to identify more Zn lines in the spectra of G191B2B and the DO-type white dwarf RE 0503289. Methods. We performed new calculations of Zn iv and Zn v oscillator strengths to consider their radiative and collisional bound-bound transitions in detail in our NLTE stellar-atmosphere models for the analysis of the Zn iv v spectrum exhibited in high-resolution and high-SN UV observations of G191B2B and RE 0503289. Results. In the UV spectrum of G191B2B, we identify 31 Zn iv and 16 Zn v lines. Most of these are identified for the first time in any star. We can reproduce well almost all of them at log Zn 5.52 0.2 (mass fraction, about 1.7 times solar). In particular, the Zn iv Zn v ionization equilibrium, which is a very sensitive Teff indicator, is well reproduced with the previously determined Teff 60 000 2000 K and log g 7.60 0.05. In the spectrum of RE 0503289, we identified 128 Zn v lines for the first time and determined log Zn 3.57 0.2 (155 times solar). Conclusions. Reliable measurements and calculations of atomic data are a pre-requisite for stellar-atmosphere modeling. Observed Zn iv and Zn v line profiles in two white dwarf (G191B2B and RE 0503289) ultraviolet spectra were well reproduced with our newly calculated oscillator strengths. This allowed us to determine the photospheric Zn abundance of these two stars precisely.

strengths↗
NASA NTRS2014

Stellar Laboratories: 3. New Ba 5, Ba 6, and Ba 7 Oscillator Strengths and the Barium Abundance in the Hot White Dwarfs G191-B2B and RE 0503-289

Context. For the spectral analysis of high-resolution and high-signal-to-noise (S/N) spectra of hot stars, state-of-the-art non-local thermodynamic equilibrium (NLTE) model atmospheres are mandatory. These are strongly dependent on the reliability of the atomic data that is used for their calculation. Aims. Reliable Ba 5-7 oscillator strengths are used to identify Ba lines in the spectra of the DA-type white dwarf G191−B2B and the DO-type white dwarf RE 0503−289 and to determine their photospheric Ba abundances. Methods. We newly calculated Ba v-vii oscillator strengths to consider their radiative and collisional bound-bound transitions in detail in our NLTE stellar-atmosphere models for the analysis of Ba lines exhibited in high-resolution and high-S/N UV observations of G191−B2B and RE 0503−289. Results. For the first time, we identified highly ionized Ba in the spectra of hot white dwarfs. We detected Ba vi and Ba vii lines in the Far Ultraviolet Spectroscopic Explorer (FUSE) spectrum of RE 0503−289. The Ba vi/Ba vii ionization equilibrium is well reproduced with the previously determined effective temperature of 70 000 K and surface gravity of log g=7.5. The Ba abundance is 3.5 +/- 0.5 × 10(exp−4) (mass fraction, about 23 000 times the solar value). In the FUSE spectrum of G191−B2B, we identified the strongest Ba vii line (at 993.41 Å) only, and determined a Ba abundance of 4.0 +/- 0.5 × 10(exp−6) (about 265 times solar). Conclusions. Reliable measurements and calculations of atomic data are a pre-requisite for stellar-atmosphere modeling. Observed Ba vi-vii line profiles in two white dwarfs' (G191−B2B and RE 0503−289) far-ultraviolet spectra were well reproduced with our newly calculated oscillator strengths. This allowed to determine the photospheric Ba abundance of these two stars precisely.

New Ba V↗
NASA NTRS2023

A Guide to Forced Oscillation Data Processing and Analysis

The NASA Langley Research Center Flight Dynamics Branch has a long history of experimental testing of aircraft and spacecraft flight dynamics. One of the frequently used wind tunnel test methods is forced oscillation testing. This method involves a model mounted on a specialized dynamic test rig in a tunnel and oscillated about a body axis, typically at a fixed sinusoidal frequency and amplitude. This report provides the derivation of two commonly used data reduction methods and introduces one new method to extract the linear dynamic derivatives from forced oscillation wind tunnel data.

Flight Dynamics↗
DOE OSTI2023

Developing VSC-HVDC Oscillation Damping Control Constraints in Unit Commitment

High-voltage direct current (HVDC) systems within the existing power grids will play a pivotal role in enabling high share of renewable power integration and transportation electrification. There is a need for transmission planning models to accurately capture the impact of VSC-HVDC oscillation damping control on the system planning and model the constraints in the security constrained unit commitment (SCUC) problem. In this paper, the SCUC problem in a hybrid DC-AC grid considering damping on electromechanical inter-area oscillation is studied. An electromechanical oscillation-driven transmission capability constraints are derived from system swing equation and incorporated into the SCUC. Multiple system damping control scenarios are set based on the extracted plausible bounds of damping coefficient and inertia constant to linearize the nonlinear expressions. The SCUC problem with proposed constraints is tested on the IEEE 73-bus reliability test system (RTS) case via PLEXOS. The impact of the proposed constraints on regional generation, inertia, power flow, annual system cost, and renewable energy curtailment are fully assessed.

damping control↗
DOE OSTI2024

Identifying Potential Sub-Synchronous Oscillations Using Impedance Scan Approach: Preprint

This paper presents an impedance scan study on the real-world power system in Australia that has observed 17 to 20 Hz intermittent subsynchronous oscillations. Through the impedance scan of each of the IBRs, both individually and collectively, potential resonance modes are identified. The impedance scans were carried out using electromagnetic transient PSCAD models of the network. The network comprises of site-specific, black-boxed models of IBRs supplied by the generators. The impedance scan approach was divided in three major steps: (1) the first step is to identify IBRs where impedance analysis needs to be performed based on the magnitude of oscillations observed at their points of interconnection (POIs); (2) the second step focuses on performing impedance scans at selected IBRs in single-machine infinite-bus (SMIB) configuration to identify internal resonance modes of an IBR and to evaluate if any of these modes become unstable under certain grid conditions; (3) the third step performs impedance scans at a few selected IBRs while connected to the wider network model to obtain the impedance response of both the IBR and the grid - this step evaluates control interactions among IBRs. The impedance scan study found that a few IBRs have an underdamped resonance mode at around 17 Hz, which becomes unstable under a certain operating condition. Another interesting finding was that certain IBRs increase the effective grid impedance seen by another IBR in proximity for a particular operating condition. Under this operating condition, the resulting subsynchronous oscillation mode is more pronounced due to a combination of control interactions among IBRs through the transmission network under study and a resonance mode inside the IBRs.

control interactions↗
DOE OSTI2022

Creation of Simulated Test Cases for the Oscillation Source Location Contest

This paper describes in detail the design process and creation of 13 oscillatory test cases for the IEEE and NASPI co-hosted Oscillation Source Locating Contest conducted in 2021. The challenges behind the 13 cases are fully demystified. Based on the philosophy, implementation considerations and techniques used for the case design presented in this paper, interested readers can create additional interesting cases for testing the efficiency of their oscillation source location methods.

ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2020

A Strategy for Forced Oscillation Suppression

Wide-area time-synchronized measurements have recently revealed troublesome forced oscillations (FOs) within modern synchronized power grids. In some cases, these FOs represent a dangerous hazard to the system. Recent research has focused on locating the source of FOs to provide operators with knowledge for mitigating their impact locally. This paper presents a complementary mitigation strategy, which is to purposely induce a second oscillation into the grid which cancels the impact of the FO. Such a strategy is complementary in that it may provide valuable time to operators attempting to locate the FOs source and to determine how to rectify it. This paper presents a suppression control strategy which modulates controllable devices to automatically cancel the impact of the FO without the need for locating the source of the original FO. The strategy is based upon tuned feedback control. In this study, the approach is demonstrated on a simulation system via modulation of inverter-based generation.

42 ENGINEERING↗
DOE OSTI2022

Creation of Simulated Test Cases for the Oscillation Source Location Contest: Preprint

This paper describes in detail the design process and creation of 13 oscillatory test cases for the IEEE and NASPI co-hosted Oscillation Source Locating Contest conducted in 2021. The challenges behind the 13 cases are fully demystified. Based on the philosophy, implementation considerations and techniques used for the case design presented in this paper, interested readers can create additional interesting cases for testing the efficiency of their oscillation source location methods.

ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2025

Three-flavor collective neutrino oscillation simulations on a qubit quantum annealer

Neutrinos are unique among elementary particles in that their flavor-compositions oscillate over time. In extreme environments such as core-collapse supernovae, neutron-star mergers, and the early Universe, neutrinos are dense enough that their self-interactions significantly affect, if not dominate, these oscillations. This has implications for several phenomena within these environments, particularly nucleosynthesis. Simulations of these self-interactions have traditionally approximated neutrinos as having two flavors instead of the physical three. In order to develop techniques for characterizing the resulting quantum entanglement, I present the results of simulations of neutrino-neutrino interactions that include all three physical neutrino flavors and were performed on D-Wave Inc.’s Advantage 5000+ qubit quantum annealer. These results are checked against those from exact classical simulations, which are also used to compare the neutrino-neutrino interactions to neutrino-antineutrino and interactions between Majorana neutrinos, which are their own antiparticles. The D-Wave Advantage annealer is shown to be able to reproduce time evolution with the precision of a classical machine for small numbers of neutrinos and to do so without the Trotter errors present in most simulations of dynamics on quantum devices. Furthermore, it suffers from poor scaling in qubit-count with the number of neutrinos.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗