Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “optimisation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Pulsed laser module based on a high-power semiconductor laser for the spectral range 1500 – 1600 nm

A laser source for bleaching passive Q-switches of erbium-ytterbium lasers is developed and studied. The developed and studied compact pulsed module (peak power exceeding 10 W in a pulse with a duration of 1 μs at a wavelength around 1550 nm) is made on the basis of a semiconductor lasers with an ultra-narrow waveguide integrated with a pulsed pump card. To optimise the output laser characteristics, a series resistance was used in the laser pump circuit. The powers of the free-space and fibre-coupled modules at a temperature of 25 °C are 15 and 12 W, respectively, at a pulse shape close to rectangular. (lasers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Disk laser heads based on Yb : YAG for multikilowatt average power lasers

The main factors affecting the cooling efficiency of Yb : YAG disk active elements have been investigated, and key technologies for designing disk lasers with high average power and efficiency have been developed. The main parameters of a disk active element operating in the cw regime are optimised using numerical calculation. Disk laser heads are fabricated based on calculations and developed technologies, and lasing with optical efficiency up to 50 % is demonstrated. An average power at the kilowatt level is obtained in a cavity with two laser heads, and a possibility of its further increasing is demonstrated. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Comparison of approaches in the manufacture of broadband mirrors for the EUV range: aperiodic and stack structures

We have developed the design and experimentally studied aperiodic and stack broadband Mo/Si mirrors for the purposes of the KORTES project, optimised for uniform reflection in the 17 – 21 nm wavelength range. It is shown that stack structures with an insignificant loss in the reflection coefficient are much more preferable from the point of view of manufacturing and certification, which, in turn, makes it possible to correct the deposition process and to reach the calculated parameters of a multilayer mirror in a small number of iterations. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Stimulated emission of AlGaN layers grown on sapphire substrates using ammonia molecular beam epitaxy

By optimising the growth temperature of the AlGaN layers and using high-temperature AlN buffer layers, high-quality Al{sub x}Ga{sub 1 – x}N layers (x = 0.15, 0.21, 0.26, and 0.3) were obtained, in which stimulated emission in the UV spectral range 330 – 297 nm was implemented with the threshold intensity of excitation I{sub th} ≈ 0.7 – 1.4 MW cm{sup −2}, respectively. It is found that the threshold value of the stimulated emission of AlGaN layers grown by molecular beam epitaxy is largely determined by the intensity of the process of thermal decomposition of GaN, which affects the surface morphology and, consequently, the amount of optical scattering loss. It is shown that no pronounced localisation of nonequilibrium charge carriers occurs in the AlGaN layers, which is manifested in the absence of a large Stokes shift and in the realisation of optical amplification at transitions in an electron-hole plasma, and also indicates a relatively homogeneous material composition. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

2D microspatial distribution uniformity of photon detection efficiency and crosstalk probability of multi-pixel photon counters

Two-dimensional (2D) microspatial distribution uniformity of photon detection efficiency (PDE) and optical crosstalk probability P{sub ct} of multi-pixel photon counters (MPPCs) is studied. The experimental results show that the 2D spatial distribution of P{sub ct} is obviously uneven, i.e. P{sub ct} is larger at the corners and edges of a single pixel in MPPCs, which suggest a higher electrical field in the depletion region of the pixel at the corners and edges. The nonuniformity of the 2D spatial distribution of PDE also become evident when the size of the pixels of MPPCs is small, which signifies higher nonuniformity of the electric field distribution in MPPCs with small pixel size. A method is proposed for characterization of the 2D electrical field spatial distribution uniformity in a single pixel of MPPCs, which can be used for guiding the optimisation of the fabrication process of MPPCs and their properties. This promising method can naturally be extended to any Geiger avalanche photodiodes (G-APDs) and their arrays. (laser applications and other topics in quantum electronics)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Tapered erbium-doped fibre laser system delivering 10 MW of peak power

We consider a fibre laser system generating ∼10-μJ, ∼500-fs pulses with a peak power of ∼10 MW at a repetition rate of 100 kHz and emission wavelength of 1.56 μm. The system is based on a master oscillator – power amplifier configuration. The amplifier ensures chirped-pulse amplification. The pulses are then compressed by a dispersive grating compressor. The output amplifier stage is based on a specially designed tapered large mode area erbium-doped fibre for suppressing nonlinear effects. The experimental data agree with numerical simulation results for the stretcher, amplifier and compressor. The stretcher and amplifier have been simulated using a generalised nonlinear Schrödinger equation. In addition, numerical simulation results suggest that optimising the stretcher and compressor will potentially allow the peak power of the system to be scaled up to ∼30 MW. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Spectral and temporal dynamics of ultrashort pulses in a holmium-doped fibre amplifier

We have optimised a hybrid mode-locked holmium-doped fibre laser and a holmium-doped fibre amplifier for obtaining stable pulses as short as possible. Temporal and spectral characteristics of pulsed light have been measured as functions of pump power. Lasing has been achieved in the wavelength range 2066 – 2068 nm, with a full width at half maximum of the emission spectrum from 3 to 4 nm. The pulse duration does not exceed 1 ps and the pulse energy ranges from 0.2 to 0.5 nJ. To raise the pulse energy, holmium-doped fibre amplifiers based on two types of active fibre have been used. We have demonstrated a decrease in the width of the central part of the pulse autocorrelation function and considerable broadening of the spectrum of the pulses. The maximum average power at the amplifier output exceeds 200 mW. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Influence of growth temperature of KTiOAsO{sub 4} single crystals on their physicochemical parameters and formation of domain structures

A potassium titanyl arsenate (KTiOAsO{sub 4}, KTA) crystal 50 × 80 × 60 mm in size has been grown by upgraded Czochralski method from flux (TGGS) with a decrease in temperature from 900 to 770 °C during pulling. It is shown that the spectroscopic properties of the parts of KTA crystals grown at 900 and 770 °C are close, whereas the electrical conductivity of the low-temperature (770 °C) KTA part turned out to be an order of magnitude lower than that of the high-temperature part. Visualisation of the domain structure by second-harmonic generation microscopy revealed a more efficient domain intergrowth (throughout the sample) in the low-temperature KTA, which is important for forming a regular domain structure (RDS) in a KTA-based nonlinear optical element. It is established that the quantum efficiency of parametric generation of light in the RDS formed in low-temperature KTA is several times higher than in the case of high-temperature KTA. The results obtained are important for optimising RDS parameters. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Holographic wavefront sensors

A brief historical review of the first designs of holographic wavefront sensors (WFS’s) and the concepts lying in their basis is presented. The main directions in the development of these sensors are highlighted and considered. One of these directions implies a two-stage transition from the use of several separate measuring channels with holograms filtering only one Zernike mode: first to the use of one channel with a multiplexed hologram filtering several first Zernike modes, and then to filtering the entire set of Zernike modes with the aid of one combined multiplexed hologram. Another line of research in this field (related to the first one) is the optimisation of the filter hologram structure in order to reduce cross-modulation interferences, increase multiplexing level, etc. One more line of research implements principles of dynamic holography by introducing spatial light modulators into the WFS composition. Hence, the advantages of time multiplexing of holograms can be used. The approach developed by G. Andersen’s team, aimed at adapting the holographic WFS design for operation as an element of adaptive optical system with a zonal corrector, as well as an approach implying development of hybrid holographic sensors, are considered separately. The results of the authors’ studies of holographic WFS’s with application of the methods of Fourier holography (i.e., holography of focused beams, in particular, using diffuse scatterers in a hologram recording channel) are also reported. (paper)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Leaky wave in high-power AlGaAs/InGaAs/GaAs semiconductor lasers

Lasers based on AlGaAs/InGaAs/GaAs heterostructures operating in the spectral range of 1.0 − 1.1 μm are investigated in order to optimise cladding layers. The effect of the thickness and composition of the cladding layers on the leakage of radiation from the laser waveguide is analysed. It is shown that for cladding thicknesses of 0.86 − 1.24 μm, it almost does not affect the output optical power. The effect of the crystal length and reflectivity of the laser mirrors on the leaky wave is demonstrated. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Physical and hydraulic forces experienced by fish passing through three different low-head hydropower turbines

Knowing the kinds of physical stress experienced by fish passing through hydropower turbines can help optimise technologies and improve fish passage. This paper assesses the hydraulic conditions experienced through three different low-head turbines (a very low head (VLH), Archimedes screw and horizontal Kaplan turbine), taken using an autonomous sensor. In total, 127 Sensor Fish deployments were undertaken across all three turbines, generating 82 valid datasets. Decompression was rare at the VLH and screw turbines and rarely fell more than 10kPa below atmospheric pressure. In contrast, the Kaplan was capable of generating pressures as low as 55.5kPa (~45kPa below atmospheric pressure), over shorter periods of time. More severe ratios of pressure changes could, therefore, be expected for both surface- and depth-acclimated fish at the Kaplan than at the other turbines. Strike was another possible source of fish injury (detected in 69–100% of deployments), and although strike severity was highest at the Kaplan, strike was more likely to be encountered at the screw and VLH than the Kaplan turbine. Shear occurred only near the blades of the Kaplan, and not at severe levels. The results demonstrated that low-head hydropower facilities are not without their risks for downstream migrating fish.

Boys, Craig A. (ORCID:0000000264342937)↗

A classical reactive potential for molecular clusters of sulphuric acid and water

We present a two state empirical valence bond (EVB) potential describing interactions between sulphuric acid and water molecules and designed to model proton transfer between them within a classical dynamical framework. The potential has been developed in order to study the properties of molecular clusters of these species, which are thought to be relevant to atmospheric aerosol nucleation. The particle swarm optimisation method has been used to fit the parameters of the EVB model to density functional theory (DFT) calculations. Features of the parametrised model and DFT data are compared and found to be in satisfactory agreement. In particular, it is found that a single sulphuric acid molecule will donate a proton when clustered with four water molecules at 300 K and that this threshold is temperature dependent. SMK was supported in part by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences, and Biosciences; JLS and IJF were supported by the IMPACT scheme at University College London (UCL). We acknowledge the UCL Legion High Performance Computing Facility, and associated support services together with the resources of the National Energy Research Scientific Computing Center (NERSC), which is supported by the U.S. Department of Energy under Contract No. DE-AC02- 05CH11231. JLS thanks Dr. Gregory Schenter, Dr. Theo Kurtén and Prof. Hanna Vehkamäki for important guidance and discussions.

aerosols↗

A local framework for calculating coupled cluster singles and doubles excitation energies (LoFEx-CCSD)

Here, the recently developed Local Framework for calculating Excitation energies (LoFEx) is extended to the coupled cluster singles and doubles (CCSD) model. In the new scheme, a standard CCSD excitation energy calculation is carried out within a reduced excitation orbital space (XOS), which is composed of localised molecular orbitals and natural transition orbitals determined from time-dependent Hartree–Fock theory. The presented algorithm uses a series of reduced second-order approximate coupled cluster singles and doubles (CC2) calculations to optimise the XOS in a black-box manner. This ensures that the requested CCSD excitation energies have been determined to a predefined accuracy compared to a conventional CCSD calculation. We present numerical LoFEx-CCSD results for a set of medium-sized organic molecules, which illustrate the black-box nature of the approach and the computational savings obtained for transitions that are local compared to the size of the molecule. In fact, for such local transitions, the LoFEx-CCSD scheme can be applied to molecular systems where a conventional CCSD implementation is intractable.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Analysis of soil eDNA functional genes: potential to increase profitability and sustainability of pastoral agriculture

Management of soil biological resources to optimise plant production, efficiency of nutrient inputs, and system sustainability is an emerging opportunity for pastoral agriculture. To attain these goals, suitable tools that can assess the functional state of the soil ecosystem must be developed and standardised approaches to their application adopted. Towards this end, we have undertaken comprehensive, high-density functional-gene microarray analysis (GeoChip5) of environmental DNA (eDNA) extracted from 50 pastoral soils. When combined with soil, environmental and management metadata, the information can be used to provide insights into soil biological processes spanning greenhouse gas emissions, through to natural suppression of plant root diseases. To give an example of a structured workflow of analysis in a pastoral system context, we analysed the GeoChip data using a combination of approaches spanning routine univariate methods through to more complex multivariate and network-based analysis. Analyses were restricted to comparing effects of land-use (dairy or ‘other’ farming systems), and exploring relationships of the GeoChip data with the soil properties from each sample. These exemplar analyses introduce a pathway for the application of eDNA approaches (GeoChip or others) to deliver outcomes for pastoral agricultural in New Zealand.

59 BASIC BIOLOGICAL SCIENCES↗

Density Functional Theory Calculations of Redox Properties of Iron–Sulphur Protein Analogues

A central issue in understanding redox properties of iron–sulphur (Fe–S) proteins is determining the factors that tune the reduction potentials of the Fe–S clusters. Studies of redox site analogues play an important role, particularly because individual factors can be examined independently of the environment by combining calculations and experiments of carefully designed ligands for the analogues. For iron–sulphur analogues, our study has shown that broken-symmetry density functional theory gives good energetics when the geometry is optimised using B3LYP with a double-ζ basis set with polarisation functions, and the energies of these geometries are calculated using B3LYP with additional diffuse functions added to the sulphurs. A comparison of our calculated energies for redox site analogues in the gas phase against electron detachment energies measured by a combination of electrospray ionisation and photoelectron spectroscopy (EI–PES) by Wang and co-workers has been essential because the comparison is for exactly the same molecule with no approximation for the environment. Overall, the correlation of our B3LYP/ 6-31(++)SG**//B3LYP/6-31G** detachment energies with EI–PES experiments is excellent for a wide variety of analogues. Moreover, our calculations at this level have provided insight into a wide variety of properties of iron–sulphur proteins.

59 BASIC BIOLOGICAL SCIENCES↗

Modeling organic electronic materials: bridging length and time scales

Organic electronics is a popular and rapidly growing field of research. The optical, electrical and mechanical properties of organic molecules and materials can be tailored using increasingly well controlled synthetic methods. The challenge and fascination with this field of research is derived from the fact that not only the chemical identity, but also the spatial arrangement of the molecules critically affects the performance of the material. Thus synthetic, fabrication, characterisation and computational scientists need to work closely to relate a materials performance in a device to the molecular details that cause and optimise that performance. For computational scientists in particular, the need to relate macroscopic device performance to details of molecular electronic structure brings challenges in methodology due to the need to bridge many orders of time and length scales. Furthermore, this article provides a survey of computational methods applied to multiple-length and time scale problems in organic electronic materials. Here we seek to highlight a few particular approaches that expand the simulation toolbox.

36 MATERIALS SCIENCE↗

Flat-histogram extrapolation as a useful tool in the age of big data

In this work, we review recent work by the authors to revisit the concept of extrapolating thermodynamic properties of classical systems using statistical mechanical principles. Specifically, we discuss how the combination of these principles with biased sampling techniques enables the prediction of free energy landscapes and other detailed information, such as structural properties, of the system in question. Remarkably accurate estimates of physical properties across a broad range of conditions have been achieved using this approach, greatly reducing the number of simulations needed to explore a given system's behaviour. While approximate, these extrapolations significantly amplify the amount of reasonably accurate information that can be extracted from simulations enabling a small set of them to feed data-intensive regression algorithms such as neural networks. Thus, this extrapolation methodology represents a useful tool for performing tasks such as high-throughput screening of physical properties, optimising force field parameters, exploring equilibrium phase behaviour, and enabling theory-guided data science for these systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Friction stir welding of thick 7175 aluminium alloy plates for deepwater riser applications

To substantially reduce the cost of extracting petroleum from ultra-deepwater sources, manufacturing risers from 7175 aluminium (Al) alloys rather than steels is being considered. Friction stir welding (FSW), a solid-phase joining technique, is widely applied to 7XXX Al alloys because its mechanical properties are retained within the nugget zone. And, the primary technical objective of the current study is the development of high-strength, corrosion-resistant weldments that connect 7175 Al riser flanges and pipes. However, as the welding thickness increases, the welding speed can be greatly impeded, which lowers the manufacturing efficiency and weakens the mechanical properties in the heat affected zone (next to the nugget). Therefore, obtaining high-performance thick plate 7175 Al alloy joints via FSW is challenging. To overcome this dilemma, the current work optimises the tool design and welding parameters for achieving high-performance joints between 25.4 mm thick 7175 Al alloy plates in butt joint configuration.

Wang, Tianhao↗