SEARCH · Engineering Papers

Results for “numerical computation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

All sources NASA NTRS DOE OSTI

NASA NTRS1991

An analysis of the Hubble Space Telescope fine guidance sensor fine lock mode

There are two guiding modes of the Hubble Space Telescope (HST) used for the acquisition of astronomical data by one of its six scientific instruments. The more precise one is called Fine Lock. Command and control problems in the onboard electronics has limited Fine Lock to brighter stars, V less than 13.0 mag, instead of fulfilling its goal of V = 14.5 mag. Consequently, the less precise guiding mode of Coarse Track (approximately 40 milli-arc seconds) has to be used fairly frequently. Indeed, almost half of the scientific observations to have been made with the HST will be compromised. The only realistic or extensive simulations of the Fine Lock guidance mode are reported. The theoretical analysis underlying the Monte Carlo experiments and the numerical computations clearly show both that the control electronics are severely under-engineered and how to adjust the various control parameters to successfully extend Fine Lock guiding performance back to V = 14.0 mag and sometimes beyond.

Taff, L. G.↗

NASA NTRS1991

Theoretical studies of lasers and converters

Discussed here is Doppler broadening and its effects upon the stimulated emission cross-section connecting an upper level with a lower level in an iodine laser. The stimulated emission cross section is given. The level transitions for the iodine laser are illustrated as are the relative intensities of these transitions. Also discussed is the Voigt profile, which considers the effect of both Doppler broadening and collision broadening upon the absorption line shape. The equations describing the Voigt profile were added to the continuous flow laser model laser simulation program. The results were compared with the standard absorption profile reported in an earlier study. There seems to be no advantage to using the Voigt profile as the laser power output is relatively insensitive to changes in the absorption cross section at the pressures being considered for a space laser. One disadvantage of using the Voigt profile is the excessive numerical computations required by the additional equations.

Heinbockel, John H.↗

NASA NTRS1991

Progress with multigrid schemes for hypersonic flow problems

Several multigrid schemes are considered for the numerical computation of viscous hypersonic flows. For each scheme, the basic solution algorithm uses upwind spatial discretization with explicit multistage time stepping. Two level versions of the various multigrid algorithms are applied to the two dimensional advection equation, and Fourier analysis is used to determine their damping properties. The capabilities of the multigrid methods are assessed by solving three different hypersonic flow problems. Some new multigrid schemes based on semicoarsening strategies are shown to be quite effective in relieving the stiffness caused by the high aspect ratio cells required to resolve high Reynolds number flows. These schemes exhibit good convergence rates for Reynolds numbers up to 200 x 10(exp 6) and Mach numbers up to 25.

Radespiel, R.↗

NASA NTRS1992

Planetary cratering mechanics

To obtain a quantitative understanding of the cratering process over a broad range of conditions, we have numerically computed the evolution of impact induced flow fields and calculated the time histories of the major measures of crater geometry (e.g., depth diameter, lip height ...) for variations in planetary gravity (0 to 10 exp 9 cm/sq seconds), material strength (0 to 140 kbar), thermodynamic properties, and impactor radius (0.05 to 5000 km). These results were fit into the framework of the scaling relations of Holsapple and Schmidt (1987). We describe the impact process in terms of four regimes: (1) penetration; (2) inertial; (3) terminal; and (4) relaxation.

Okeefe, John D.↗

NASA NTRS1991

Mutual impedance of parallel and perpendicular coplanar surface monopoles

One dimensional integral formulas are derived for mutual impedance of arbitrary size, coplanar, parallel, and perpendicular surface monopoles. The integrals in formulas are expressed as exponential integrals where possible. The mutual impedance expression for parallel monopoles is a summation of exponential integrals and one-dimensional integrals. For perpendicular monopoles, the mutual impedance is in closed form, containing exponential integrals only. The final expressions are in a form suitable for numerical computation. Since the expressions contain at most one-dimensional integrals, they can be utilized to reduce the matrix filling time in the moment method formulations, especially when inhomogeneous sectioning is preferred. Additionally, they can be used in rectangular surface patch modeling of conducting surfaces with edges which are at an angle to the surface patches, providing the angle is small. To this end, the expressions were utilized in the moment method analysis of linearly tapered slot antennas. Very good accuracy was obtained with a reduction in computer time.

Koksal, Adnan↗

NASA NTRS1991

Magnetic radiation shielding - An idea whose time has returned?

One solution to the problem of shielding crew from particulate radiation in space is to use active electromagnetic shielding. Practical types of shield include the magnetic shield, in which a strong magnetic field diverts charged particles from the crew region, and the magnetic/electrostatic plasma shield, in which an electrostatic field shields the crew from positively charged particles, while a magnetic field confines electrons from the space plasma to provide charge neutrality. Advances in technology include high-strength composite materials, high-temperature superconductors, numerical computational solutions to particle transport in electromagnetic fields, and a technology base for construction and operation of large superconducting magnets. These advances make electromagnetic shielding a practical alternative for near-term future missions.

Landis, Geoffrey A.↗

NASA NTRS1991

Effect of convection on the microstructure of a lamellar eutectic growing with a stepped interface

A two dimensional model developed to study the influence of convective flow on the concentration field ahead of a growing lamellar eutectic is described when one phase projects out into the melt creating a stepped interface. The two dimensional convective flow field, which is periodic in the horizontal direction, was computed numerically using the software FLUENT. The velocity field generated due to the flow of melt over the steps was then incorporated into a finite difference scheme employed to solve the concentration field. The average interfacial composition was calculated and converted to lamellar spacing using the Jackson and Hunt minimum supercooling criterion. It was found that a stepped interface is more sensitive to convection than a planar interface.

Seth, Jayshree↗

NASA NTRS1991

Recent manufacturing advances for spiral bevel gears

The U.S. Army Aviation Systems Command (AVSCOM), through the Propulsion Directorate at NASA Lewis Research Center, has recently sponsored projects to advance the manufacturing process for spiral bevel gears. This type of gear is a critical component in rotary-wing propulsion systems. Two successfully completed contracted projects are described. The first project addresses the automated inspection of spiral bevel gears through the use of coordinate measuring machines. The second project entails the computer-numerical-control (CNC) conversion of a spiral bevel gear grinding machine that is used for all aerospace spiral bevel gears. The results of these projects are described with regard to the savings effected in manufacturing time.

Handschuh, Robert F.↗

NASA NTRS1992

The numerical dynamic for highly nonlinear partial differential equations

Problems associated with the numerical computation of highly nonlinear equations in computational fluid dynamics are set forth and analyzed in terms of the potential ranges of spurious behaviors. A reaction-convection equation with a nonlinear source term is employed to evaluate the effects related to spatial and temporal discretizations. The discretization of the source term is described according to several methods, and the various techniques are shown to have a significant effect on the stability of the spurious solutions. Traditional linearized stability analyses cannot provide the level of confidence required for accurate fluid dynamics computations, and the incorporation of nonlinear analysis is proposed. Nonlinear analysis based on nonlinear dynamical systems complements the conventional linear approach and is valuable in the analysis of hypersonic aerodynamics and combustion phenomena.

Lafon, A.↗

NASA NTRS1992

An analysis of the Hubble Space Telescope fine guidance sensor Fine Lock mode

There are two guiding modes of the Hubble Space Telescope used for the acquisition of astronomical data by one of its six scientific instruments. The more precise one is called Fine Lock. Command and control problems in the on-board electronics, compounded by the aberrations in the main optics, has limited routinely successful Fine Lock to brighter stars, V less than 13.0 mag, instead of fulfilling its prelaunch goal of V = 14.5 mag. Consequently, the less precise guiding mode of Coarse Track (about 25 milliarcsecond in practice) has to be used fairly frequently. Indeed, almost half of the celestial hemisphere has stars too faint to support guidance in the Fine Lock mode. Hence, some of the scientific observations to have been made with the Hubble Space Telescope will be compromised. In this paper a report on the only realistic or extensive simulations of the Fine Lock guidance mode is presented. The theoretical analysis underlying the Monte Carlo experiments and the numerical computations show that the control electronics have significant limitations and how to adjust the various control parameters in an attempt to extend Fine Lock guiding performance back to V - 14.0 mag.

Taff, L. G.↗

NASA NTRS1991

Derivative interface conditions for multiblock grids

Methods are developed for computing numerical solutions along block boundaries, even when there is a discontinuity in the grid lines or slopes. The technique is based on matching derivatives and does not require overlapping and interpolation of solution values at block boundaries. The comparison of block boundary values is implicit and has proven to be stable for both implicit and explicit numerical algorithms. Examples are included for the numerical solution of the Euler equations for compressible flow on grids with both grid line discontinuities and discontinuous slopes at block boundaries.

Mastin, C. W.↗

NASA NTRS1992

A stable procedure to calculate the transient scattering by conducting surfaces of arbitrary shape

In this paper, a solution procedure is presented to obtain the transient scattering by arbitrarily shaped conducting objects directly in the time-domain using the marching-on-in-time method. The late-time oscillations are eliminated by a simple stabilization procedure which involves negligible amount of extra computation. Numerical results for surface current density and far-scattered fields are given for various structures and compared with other methods.

Vechinski, Douglas A.↗

NASA NTRS1992

Diffraction by a symmetric material junction simulated with generalized sheet transistion conditions

When diffraction by a material discontinuity in a thick dielectric/ferrite slab is treated for the dual integral equation approach (a variation of the Weiner-Hopf method), the resulting solution displays unknown constants, characteristic of the incompleteness associated with the generalized transition conditions employed in modeling a thick slab. The constants can be shown to depend on the geometry and properties of the discontinuity. Their explicit determination by enforcing field continuity across the slab junction is treated. The field internal to the slab is determined by first expressing the field as an expansion of discrete and continuous eigenmodes valid in the exterior and interior slab region. The expansion or mode coefficients are then identified by recasting the Weiner-Hopf solution in a suitable form, enabling the solution constants to be numerically computed by matching the field expansions to the left and right of the slab discontinuity at a discrete set of points.

Ricoy, Mark A.↗

NASA NTRS1992

Origin And Behavior Of Asymmetric Vortices

Report presents theoretical study of vortices shed by ogive/cylinder body of revolution facing oncoming flow at various angles of attack. Study focuses attention on two phenomena observed in prior computer numerical simulations of such flows: mean flow that is asymmetrical, at moderate to high angle of attack, about plane containing angle of attack; and fluctuations at higher angles of attack.

Tobak, Murray↗

NASA NTRS1992

On the coupling between a supersonic boundary layer and a flexible surface

The coupling between a two-dimensional, supersonic, laminar boundary layer and a flexible surface is studied using direct numerical computations of the Navier-Stokes equations coupled with the plate equation. The flexible surface is forced to vibrate by plane acoustic waves at normal incidence emanated by a sound source located on the side of the flexible surface opposite to the boundary layer. The effect of the source excitation frequency on the surface vibration and boundary layer stability is analyzed. We find that, for frequencies near the fifth natural frequency of the surface or lower, large disturbances are introduced in the boundary layer which may alter its stability characteristics. The interaction between a stable two-dimensional disturbance of Tollmien-Schlichting (TS) type with the vibrating surface is also studied. We find that the disturbance level is higher over the vibrating flexible surface than that obtained when the surface is rigid, which indicates a strong coupling between flow and structure. However, in the absence of the sound source the disturbance level over the rigid and flexible surfaces are identical. This result is due to the high frequency of the TS disturbance which does not couple with the flexible surface.

Frendi, Abdelkader↗

NASA NTRS1993

Supersonic boundary-layer flow turbulence modeling

Baldwin-Lomax and kappa-epsilon turbulence models were modified for use in Navier-Stokes numerical computations of Mach 2.9 supersonic turbulent boundary layer flows along compression ramps. The computational results of Reynolds shear stress profiles were compared with experimental data. The Baldwin-Lomax model was modified to account for the Reynolds shear stress amplification within the flow field. A hybrid kappa-epsilon model with viscous sublayer turbulence treatment was constructed to predict the Reynolds shear stress profiles within the entire flow field. These modified turbulence models were effective for the computations of the surface pressure and the skin friction factor variations along an 8 deg ramp surface. The hybrid kappa-epsilon model could improve the predictions of the Reynolds shear stress profile and the skin friction factor near the corner of a 16 deg ramp.

Wang, Chi-Rong↗

NASA NTRS1993

An explicit solution to the optimal LQG problem for flexible structures with collocated rate sensors

We present a class of compensators in explicit form (not requiring numerical computer calculations) for stabilizing flexible structures with collocated rate sensors. They are based on the explicit solution, valid for both Continuum and FEM Models, of the LQG problem for minimizing mean square rate. They are robust with respect to system stability (will not destabilize modes even with mismatch of parameters), can be instrumented in state space form suitable for digital controllers, and can be specified directly from the structure modes and mode 'signature' (displacement vectors at sensor locations). Some simulation results are presented for the NASA LaRC Phase-Zero Evolutionary Model - a modal Trust model with 86 modes - showing damping ratios attainable as a function of compensator design parameters and complexity.

Balakrishnan, A. V.↗

NASA NTRS1993

Studies of droplet burning and extinction

A project on droplet combustion, pursued jointly with F.L. Dryer of Princeton University, has now been in progress for many years. The project involves experiments on the burning of single droplets in various atmospheres, mainly at normal atmosperic pressure and below, performed in drop towers and designed to be performed aboard space-based platforms such as the Space Shuttle or the Space Station. It also involves numerical computations on droplet burning, performed mainly at Princeton, and asymptotic analyses of droplet burning, performed mainly at UCSD. The focus of the studies rests primarily on time-dependent droplet-burning characteristics and on extinction phenomena. The presentation to be given here concerns the recent research on application of asymptotic methods to investigation of the flame structure and extinction of hydrocarbon droplets. These theoretical studies are investigating the extent to which combustion of higher hydrocarbons - heptane, in particular - can be described by four-step reduced chemistry of the kind that has achieved a good degree of success for methane flames. The studies have progressed to a point at which a number of definite conclusions can now be stated. These conclusions and the reasoning that led to them are outlined here.

Williams, Forman A.↗