Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “maximum principle”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Mars laser altimeter based on a single photon ranging technique

The Mars 94/96 Mission will carry, among others things, the balloon probe experiment. The balloon with the scientific cargo in the gondola underneath will drift in the Mars atmosphere, its altitude will range from zero, in the night, up to 5 km at noon. The accurate gondola altitude will be determined by an altimeter. As the Balloon gondola mass is strictly limited, the altimeter total mass and power consumption are critical; maximum allowed is a few hundred grams a few tens of mWatts of average power consumption. We did propose, design, and construct the laser altimeter based on the single photon ranging technique. Topics covered include the following: principle of operation, altimeter construction, and ground tests.

Prochazka, Ivan↗

A Reduced Model for Prediction of Thermal and Rotational Effects on Turbine Tip Clearance

This paper describes a dynamic model that was developed to predict changes in turbine tip clearance the radial distance between the end of a turbine blade and the abradable tip seal. The clearance is estimated by using a first principles approach to model the thermal and mechanical effects of engine operating conditions on the turbine sub-components. These effects are summed to determine the resulting clearance. The model is demonstrated via a ground idle to maximum power transient and a lapse-rate takeoff transient. Results show the model demonstrates the expected pinch point behavior. The paper concludes by identifying knowledge gaps and suggesting additional research to improve the model.

Kypuros, Javier A.↗

Factors Affecting the Evolution of Hurricane Erin and the Distributions of Hydrometeors: Role of Microphysical Processes

Fine-resolution simulations of Hurricane Erin 2001 are conducted using the Penn State University/National Center for Atmospheric Research mesoscale model version 3.5 to investigate the role of thermodynamic, boundary layer and microphysical processes in Erin's growth and maintenance, and their effects on the horizontal and vertical distributions of hydrometeors. Through comparison against radar, radiometer, and dropsonde data collected during the Convection and Moisture Experiment 4, it is seen that realistic simulations of Erin are obtained provided that fine resolution simulations with detailed representations of physical processes are conducted. The principle findings of the study are as follows: 1) a new iterative condensation scheme, which limits the unphysical increase of equivalent potential temperature associated with most condensation schemes, increases the horizontal size of the hurricane, decreases its maximum rainfall rate, reduces its intensity, and makes its eye more moist; 2) in general, microphysical parameterization schemes with more categories of hydrometeors produce more intense hurricanes, larger hydrometeor mixing ratios, and more intense updrafts and downdrafts; 3) the choice of coefficients describing hydrometeor fall velocities has as big of an impact on the hurricane simulations as does choice of microphysical parameterization scheme with no clear relationship between fall velocity and hurricane intensity; and 4) in order for a tropical cyclone to adequately intensify, an advanced boundary layer scheme (e.g., Burk-Thompson scheme) must be used to represent boundary layer processes. The impacts of varying simulations on the horizontal and vertical distributions of different categories of hydrometeor species, on equivalent potential temperature, and on storm updrafts and downdrafts are examined to determine how the release of latent heat feedbacks upon the structure of Erin. In general, all simulations tend to overpredict precipitation rate and hydrometeor mixing ratios. The ramifications of these findings for quantitative precipitation forecasts (QPFs) of tropical cyclones are discussed.

McFarquhar, Greg M.↗

Long history of Cl-36 Assessment of Graphite Waste by EDF Engineering and the Latest Suggested Developments - 17043

Prior to 2005, the EDF initial version for the radiological inventory of graphite was based on the maximum values of the measures, namely a very pessimistic way. In 2008, a scientific method was developed by EDF to evaluate the inventory by reverse activation calculation, in order to limit the overestimation. The radiological inventory computation principles can be compared to those of all engineering studies. First, the calculation is simplified by taking margins, and if the results are not satisfactory enough, some simplifications are suppressed to reduce these margins even if computation becomes more complicated. On EDF piles, the gain obtained in 2008 represented a factor 50 relative to the initial version of Cl-36, even with a very penalizing multiplicative factor for uncertainty. Today, the accurate calculation of the uncertainty no longer justifies such a factor. A gain of about 150 now occurs compared to the initial version of Cl-36. It is more than 2 orders of magnitude, which is already enough to assess again the necessary type of disposal because Cl-36 is one of the key radionuclides. After global presentation of graphite waste management in France, the paper focuses on the inventory scientific process of EDF nuclear graphite, the purity of graphite and its consequences, its particular sampling, the lessons learned, the initial method description, the link with the demonstration of the completely random point process of chlorine in nuclear graphite and the last suggested precise uncertainty computation of inventory of Cl-36. The method confirmation for concentration assessment, the history of the EDF method development and its benefits are also emphasized. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Phylogenetic diversity of 200+ isolates of the ectomycorrhizal fungus Cenococcum geophilum associated with Populus trichocarpa soils in the Pacific Northwest, USA and comparison to globally distributed representatives

The ectomycorrhizal fungal symbiont Cenococcum geophilum is of high interest as it is globally distributed, associates with many plant species, and has resistance to multiple environmental stressors. C . geophilum is only known from asexual states but is often considered a cryptic species complex, since extreme phylogenetic divergence is often observed within nearly morphologically identical strains. Alternatively, C . geophilum may represent a highly diverse single species, which would suggest cryptic but frequent recombination. Here we describe a new isolate collection of 229 C . geophilum isolates from soils under Populus trichocarpa at 123 collection sites spanning a ~283 mile north-south transect in Western Washington and Oregon, USA (PNW). To further understanding of the phylogenetic relationships within C . geophilum , we performed maximum likelihood and Bayesian phylogenetic analyses to assess divergence within the PNW isolate collection, as well as a global phylogenetic analysis of 789 isolates with publicly available data from the United States, Japan, and European countries. Phylogenetic analyses of the PNW isolates revealed three distinct phylogenetic groups, with 15 clades that strongly resolved at >80% bootstrap support based on a GAPDH phylogeny and one clade segregating strongly in two principle component analyses. The abundance and representation of PNW isolate clades varied greatly across the North-South range, including a monophyletic group of isolates that spanned nearly the entire gradient at ~250 miles. A direct comparison between the GAPDH and ITS rRNA gene region phylogenies, combined with additional analyses revealed stark incongruence between the ITS and GAPDH gene regions, consistent with intra-species recombination between PNW isolates. In the global isolate collection phylogeny, 34 clades were strongly resolved using Maximum Likelihood and Bayesian approaches (at >80% MLBS and >0.90 BPP respectively), with some clades having intra- and intercontinental distributions. Together these data are highly suggestive of divergence within multiple cryptic species, however additional analyses such as higher resolution genotype-by-sequencing approaches are needed to distinguish potential species boundaries and the mode and tempo of recombination patterns.

59 BASIC BIOLOGICAL SCIENCES↗

Enhanced Interlayer Coupling and Excitons in Twin-Stacked Two-Dimensional Magnetic CrSBr Bilayers

The degree of electronic coupling between individual layers in van der Waals heterostructures offers a route to engineer their magnetic, electronic, and optical functionalities. Using state-of-the-art first-principles calculations, in this work, we demonstrate that the electronic coupling between two monolayers of CrSBr─an anisotropic two-dimensional magnetic semiconductor─is highly nonlinear and nonmonotonic with respect to their relative twist angle, exhibiting a pronounced maximum at the twin-stacking configuration. The coupling strength scales with both the degree of overlap of Br orbitals adjacent to the van der Waals gap and the cosine of half of the interlayer spin angle. This enhanced interlayer electronic coupling leads to excitons delocalized across the two layers, with a polarization dependence that reflects the interlayer spin alignment. Our results reveal a sensitive interplay among twist angle, magnetism, and excitonic properties in twin-stacked CrSBr bilayers, suggesting twin stacking as an effective means for engineering interlayer coupling.

2D materials↗

Surface emitting multi-wavelength array of single frequency quantum cascade lasers

We present a surface emitting laser array design based on distributed Bragg reflectors together with a second order extractor, providing a deterministic mode selection mechanism. The technology is implemented as a buried heterostructure compatible with continuous-wave operation and low dissipation. A proof of principle featured 10 regularly spaced single mode devices with a coverage of 175 cm{sup −1} in the 8–10 μm wavelength range and milliwatt output powers with a far-field pattern full-width half-maximum of 8.3° in the longitudinal direction.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Equation of state of boron nitride combining computation, modeling, and experiment

The equation of state (EOS) of materials at warm dense conditions poses significant challenges to both theory and experiment. We report a combined computational, modeling, and experimental investigation leveraging new theoretical and experimental capabilities to investigate warm-dense boron nitride (BN). The simulation methodologies include path integral Monte Carlo (PIMC), several density functional theory (DFT) molecular dynamics methods [plane-wave pseudopotential, Fermi operator expansion (FOE), and spectral quadrature (SQ)], activity expansion (actex), and all-electron Green's function Korringa-Kohn-Rostoker (mecca), and compute the pressure and internal energy of BN over a broad range of densities and temperatures. Our experiments were conducted at the Omega laser facility and the Hugoniot response of BN to unprecedented pressures (1200–2650 GPa). The EOSs computed using different methods cross validate one another in the warm-dense matter regime, and the experimental Hugoniot data are in good agreement with our theoretical predictions. By comparing the EOS results from different methods, we assess that the largest discrepancies between theoretical predictions are ≲ 4% in pressure and ≲ 3% in energy and occur at 10 6 K, slightly below the peak compression that corresponds to the K -shell ionization regime. At these conditions, we find remarkable consistency between the EOS from DFT calculations performed on different platforms and using different exchange-correlation functionals and those from PIMC using free-particle nodes. This provides strong evidence for the accuracy of both PIMC and DFT in the high-pressure, high-temperature regime. Moreover, the recently developed SQ and FOE methods produce EOS data that have significantly smaller statistical error bars than PIMC, and so represent significant advances for efficient computation at high temperatures. The shock Hugoniot predicted by PIMC, actex, and mecca shows a maximum compression ratio of 4.55 ± 0.05 for an initial density of 2.26 g/cm 3 , higher than the Thomas-Fermi predictions by about 5%. In addition, we construct tabular EOS models that are consistent with the first-principles simulations and the experimental data. Our findings clarify the ionic and electronic structure of BN over a broad range of temperatures and densities and quantify their roles in the EOS and properties of this material. The tabular models may be utilized for future simulations of laser-driven experiments that include BN as a candidate ablator material.

36 MATERIALS SCIENCE↗

Experimental and Theoretical Analyses of Zinc-Vacancy-Induced Room-Temperature Ferromagnetism in ZnO Films

Room-temperature ferromagnetism (RTFM) has been observed in RF magnetron sputtered ZnO films with O{sub 2} as an auxiliary gas after annealing. The films exhibit hexagonal wurtzite structure and observable ferromagnetism. A maximum of saturation magnetization of 4.75 emu/cm{sup 3} is obtained. The zinc vacancies are believed as the RTFM origin, and oxygen vacancies are not an incentive of magnetization of the ZnO films. Theoretical study based on first principles calculation is performed for better understanding of the RTFM in substance. The intrinsic physical mechanism of regulating the ferromagnetic of the ZnO film is analyzed in detail.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

M-Edge Spectroscopy of Transition Metals: Principles, Advances, and Applications

M-edge X-ray absorption spectroscopy (XAS), which probes 3p→3d transitions in first-row transition metals, provides detailed insights into oxidation states, spin-states, and local electronic structure with high element and orbital specificity. Operating in the extreme ultraviolet (XUV) region, this technique provides sharp multiplet-resolved features with high sensitivity to ligand field and covalency effects. Compared to K- and L-edge XAS, M-edge spectra exhibit significantly narrower full widths at half maximum (typically 0.3–0.5 eV versus >1 eV at the L-edge and >1.5–2 eV at the K-edge), owing to longer 3p core-hole lifetimes. M-edge measurements are also more surface-sensitive due to the lower photon energy range, making them particularly well-suited for probing thin films, interfaces, and surface-bound species. The advent of tabletop high-harmonic generation (HHG) sources has enabled femtosecond time-resolved M-edge measurements, allowing direct observation of ultrafast photoinduced processes such as charge transfer and spin crossover dynamics. This review presents an overview of the fundamental principles, experimental advances, and current theoretical approaches for interpreting M-edge spectra. We further discuss a range of applications in catalysis, materials science, and coordination chemistry, highlighting the technique’s growing impact and potential for future studies.

M-edge XANES↗

The maximum clique enumeration problem: algorithms, applications, and implementations

Background: The maximum clique enumeration (MCE) problem asks that we identify all maximum cliques in a finite, simple graph. MCE is closely related to two other well-known and widely-studied problems: the maximum clique optimization problem, which asks us to determine the size of a largest clique, and the maximal clique enumeration problem, which asks that we compile a listing of all maximal cliques. Naturally, these three problems are N P -hard, given that they subsume the classic version of the N P -complete clique decision problem. MCE can be solved in principle with standard enumeration methods due to Bron, Kerbosch, Kose and others. Unfortunately, these techniques are ill-suited to graphs encountered in our applications. We must solve MCE on instances deeply seeded in data mining and computational biology, where high-throughput data capture often creates graphs of extreme size and density. MCE can also be solved in principle using more modern algorithms based in part on vertex cover and the theory of fixed-parameter tractability (FPT). While FPT is an improvement, these algorithms too can fail to scale sufficiently well as the sizes and densities of our datasets grow. Results: An extensive testbed of benchmark graphs are created using publicly available transcriptomic datasets from the Gene Expression Omnibus (GEO). Empirical testing reveals crucial but latent features of such high-throughput biological data. In turn, it is shown that these features distinguish real data from random data intended to reproduce salient topological features. In particular, with real data there tends to be an unusually high degree of maximum clique overlap. Armed with this knowledge, novel decomposition strategies are tuned to the data and coupled with the best FPT MCE implementations. Conclusions: Several algorithmic improvements to MCE are made which progressively decrease the run time on graphs in the testbed. Frequently the final runtime improvement is several orders of magnitude. As a result, instances which were once prohibitively time-consuming to solve are brought into the domain of realistic feasibility.

59 BASIC BIOLOGICAL SCIENCES↗

Anomalous Behavior of Electronic Heat Capacity of Strongly Correlated Iron Monosilicide

The paper deals with the electronic heat capacity of iron monosilicide FeSi subjected to semiconductor–metal thermal transition during which the formation of its spintronic properties is observed. The proposed model which considers pd-hybridization of strongly correlated d-electrons with non-correlated p-electrons, demonstrates a connection of their contribution to heat capacity in the insulator phase with paramagnon effects and fluctuations of occupation numbers for p- and d-states. In a slitless state, the temperature curve of heat capacity is characterized by a maximum appeared due to normalization of the electron density of states using fluctuating exchange fields. At higher temperatures, a linear growth in heat capacity occurs due to paramagnon effects. The correlation between the model parameters and the first-principles calculation provides the electron contribution to heat capacity, which is obtained from the experimental results on phonon heat capacity. Anharmonicity of phonons is connected merely with the thermal expansion of the crystal lattice.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermal-Strain-Enabled Enhanced Emission from UV Laser-Induced Defect Levels near the Surface of Multilayer MoS 2

Monolayer two-dimensional (2D) materials have been intensively studied while research on multilayers is still in its infancy. Here, we induce defects inside bulk MoS 2 through thermal annealing and near the surface of multilayer MoS 2 using 375 nm laser irradiation, and investigate their photoluminescence (PL) and fluorescence lifetime imaging (FLIM). Enhanced emission is limited within a certain MoS 2 thickness. The observed enhanced emission is evidenced by a threshold behavior in super-linear PL intensity increase, strong polarization effects, and increased lifetime of defect peak. The laser power threshold for enhanced emission is much smaller in defects near the surface than that inside the bulk of multilayer MoS 2 . The mechanical strain from a wrinkle of the sample further lowers the laser power threshold for enhanced emission. By exciting with a 639 nm laser that is close to the fundamental gap between the conduction band minimum and the valence band maximum, the lifetime of defect enhanced emission increased by 5 times. Furthermore, one of the competing indirect bandgap emissions disappears, and the defect emission peak dominates the PL spectrum in the wrinkle area with a strain. Furthermore, the discovered principle can be applied to future studies on the integration of enhanced emission and single photon emission involving selectively depopulating the conduction band of the host crystal to defect levels for quantum emitters.

2D materials↗

Open Cavity Solutions to the rf in Magnetic Field Problem

It has been observed that breakdown in an 805 MHz pill-box cavity occurs at much lower gradients as an external axial magnetic field is increased. This effect was not observed with on open iris cavity. It is proposed that this effect depends on the relative angles of the magnetic and maximum electric fields: parallel in the pill-box case; at an angle in the open iris case. If so, using an open iris structure with solenoid coils in the irises should perform even better. A lattice, using this principle, is presented, for use in 6D cooling for a Muon Collider. Experimental layouts to test this principle are proposed.

43 PARTICLE ACCELERATORS↗

Mechanical properties, glass transition temperature, and bond enthalpy trends of high metalloid Fe-based bulk metallic glasses

Mechanical properties and glass transition temperatures (T{sub g}) of Fe-Cr-Mo-P-C-B bulk metallic glasses containing up to 27 at. % metalloids have been studied. The shear modulus (G) is found to decrease with increasing metalloid content and a maximum plastic strain of {approx}3% is obtained, despite the increase in the number of strong metal-metalloid bonds. Also, T{sub g} increases with the decrease in G, in contrast to usual behavior. By employing first-principles calculations, the results are discussed in light of atomic bonding and connectivity in the amorphous network. The findings are relevant to understanding ductility and glass transition of metallic glasses.

36 MATERIALS SCIENCE↗

Revised prediction (estimation) of Cape Kennedy, Florida, wind speed profile

The prediction of the wind profile maximum speed at Cape Kennedy, Florida, is made for any selected calendar data. The prediction is based on a normal probability distribution model with 15 years of smoothed input data and is static in the sense that no dynamic principles of persistence or synoptic features are considered. Comparison with similar predictions based on 6 years of data shows the same general pattern, but the variability decreased with the increase of sample size.

Guttman, N. B.↗