Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “matrix power”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

On a Spectral Method for β -particle Bound Excitation Collisions in Kilonovae

The interaction of β-particles with the weakly ionized plasma background is an important mechanism for powering the kilonova (KN) transient signal from neutron star mergers. For this purpose, we present an implementation of the approximate fast-particle collision kernel, described by Inokuti following the seminal formulation of Bethe, in a spectral solver of the Vlasov–Maxwell–Boltzmann equation. In particular, we expand the fast-particle plane-wave atomic excitation kernel into coefficients of the Hermite basis, and derive the relevant discrete spectral system. In this fast-particle limit, the approach permits the direct use of atomic data, including optical oscillator strengths, normally applied to photon–matter interaction. The resulting spectral matrix is implemented in the MASS-APP spectral solver framework, in a way that avoids full matrix storage per spatial zone. We numerically verify aspects of the matrix construction, and present a proof-of-principle 3D simulation of a 2D axisymmetric KN ejecta snapshot. Our preliminary numerical results indicate that a reasonable choice of Hermite basis parameters for β-particles in the KN is a bulk velocity parameter u = 0, a thermal velocity parameter α = 0.5c, and a 9 × 9 × 9 mode velocity basis set (Hermite orders of 0–8 in each dimension). For interior-ejecta sample zones, we estimate that the ratio of thermalization from large-angle (≳2fdg5) bound excitation scattering to total thermalization is ~0.002–0.003.

79 ASTRONOMY AND ASTROPHYSICS↗

Integrating Intermediate Traits in Phylogenetic Genotype-to-Phenotype Studies

A major goal of research in evolution and genetics is linking genotype to phenotype. This work could be direct, such as determining the genetic basis of a phenotype by leveraging genetic variation or divergence in a developmental, physiological, or behavioral trait. The work could also involve studying the evolutionary phenomena (e.g., reproductive isolation, adaptation, sexual dimorphism, behavior) that reveal an indirect link between genotype and a trait of interest. When the phenotype diverges across evolutionarily distinct lineages, this genotype-to-phenotype problem can be addressed using phylogenetic genotype-to-phenotype (PhyloG2P) mapping, which uses genetic signatures and convergent phenotypes on a phylogeny to infer the genetic bases of traits. The PhyloG2P approach has proven powerful in revealing key genetic changes associated with diverse traits, including the mammalian transition to marine environments and transitions between major mechanisms of photosynthesis. However, there are several intermediate traits layered in between genotype and the phenotype of interest, including but not limited to transcriptional profiles, chromatin states, protein abundances, structures, modifications, metabolites, and physiological parameters. Each intermediate trait is interesting and informative in its own right, but synthesis across data types has great promise for providing a deep, integrated, and predictive understanding of how genotypes drive phenotypic differences and convergence. We argue that an expanded PhyloG2P framework (the PhyloG2P matrix) that explicitly considers intermediate traits, and imputes those that are prohibitive to obtain, will allow a better mechanistic understanding of any trait of interest. Furthermore, this approach provides a proxy for functional validation and mechanistic understanding in organisms where laboratory manipulation is impractical.

59 BASIC BIOLOGICAL SCIENCES↗

Direct quarkonium production in DIS from a joint CGC and NRQCD framework

We compute the differential cross section for direct quarkonium production in high-energy electron-nucleus collisions at small 𝑥. Our computation is performed within the nonrelativistic QCD factorization formalism that separates the calculation into short distance coefficients and long distance matrix elements that depend on the color and spin of the state. We obtain the short distance coefficients of the production of the heavy quark pair within the framework of the color glass condensate effective field theory, which resums coherent multiple interactions of the heavy quark pair with the nucleus to all orders. Our results are expressed as the convolution of perturbatively calculable functions with multipoint lightlike Wilson line correlators. In the correlation limit, we establish the correspondence between our color glass condensate formulation with calculations employing the transverse momentum dependent (TMD) framework. We extend this correspondence by resumming kinematic power corrections within the improved TMD framework, which interpolates between the TMD formalism and 𝑘 ⊥ -factorization formalism. We present a detailed numerical analysis, focusing on 𝐽/𝜓 production in the kinematics accessible at the future Electron-Ion Collider, highlighting the importance of genuine higher-order saturation contributions when the electron collides with a large nucleus. Our results are also valid in the photoproduction limit where we expect the largest contribution from genuine higher-order saturation contributions which could be accessed in ultraperipheral collisions of relativistic heavy ions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Nanoparticle-enabled increase of energy efficiency during laser metal additive manufacturing

The low energy efficiency of the laser metal additive manufacturing (AM) process is a potential sustainability concern for large-scale industrial production. Explicit investigation of the energy efficiency for laser melting requires the direct characterization of melt pool dimension and vapor depression, which is very difficult due to the opaque nature of the molten metal. Here we report the direct observation and quantification of effects of the TiC nanoparticles on the vapor depression and melt pool formation during laser powder bed fusion (LPBF) of Al6061 by in-situ high-speed high-energy x-ray imaging. Based on the quantification results, we calculated the laser melting energy efficiency (defined here as the ratio of the energy needed to melt the material to the energy delivered by the laser beam) with and without TiC nanoparticles during LPBF of Al6061. Here the results show that adding TiC nanoparticles into Al6061 leads to a significant increase of laser melting energy efficiency (114% increase on average, 521% increase under 312 W laser power, 0.4 m/s scan speed). Systematic property measurement, simulation, and x-ray imaging studies enable us, for the first time, to identify that three mechanisms work together to enhance the laser melting energy efficiency: (1) adding TiC nanoparticles increases the absorptivity; (2) adding TiC nanoparticles decreases the thermal conductivity, and (3) adding TiC nanoparticles enables the initiation of vapor depression and multiple reflection at lower laser power (i.e., lowers the laser power threshold for keyholing). The method and mechanisms of using TiC nanoparticles to increase the laser melting energy efficiency during LPBF of Al6061 we reported here may guide the development of feedstock materials for more energy efficient laser metal AM.

36 MATERIALS SCIENCE↗

Assembly of MiniFuel Targets for Irradiation of TRISO Fuel Compacts in the High Flux Isotope Reactor

To support the development of Kairos Power’s fluoride-salt-cooled high-temperature reactor, irradiation testing of tristructural isotropic (TRISO) fuel compacts was performed at the Oak Ridge National Laboratory (ORNL) High Flux Isotope Reactor (HFIR) to collect experimental data on TRISO fuel during high particle-power operation and validate fuel performance models. Fuel compacts containing enriched uranium oxycarbide (UCO), natural UCO (NUCO), or uranium dioxide (UO 2 ) TRISO particles were fabricated at ORNL and inserted into MiniFuel targets for HFIR irradiation. Five MiniFuel targets were successfully assembled, welded, tested, and delivered to HFIR, along with their quality assurance documentation. The targets were inserted into HFIR’s inner vertical experiment facility within the permanent beryllium reflector. Each target contains six fuel compacts and will be irradiated in HFIR for four cycles, with target temperatures of 500, 700, and 900°C. This report summarizes the experiment design, test matrix, and fabrication. This work was performed under the Nuclear Science User Facility program.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Electric Drive Technologies Research: Bottom-Up Soft Magnetic Composites (FY2022 Annual Progress Report)

In order to meet 2025 goals for enhanced peak power (100 kW), specific power (50 kW/L), and reduced cost (3.3 $\$$/kW) in a motor that can operate at ≥ 20,000 rpm, improved soft magnetic materials must be developed. Better performing soft magnetic materials will also enable rare earth free electric motors. In fact, replacement of permanent magnets with soft magnetic materials was highlighted in the Electrical and Electronics Technical Team (EETT) Roadmap as a R&D pathway for meeting 2025 targets. Eddy current losses in conventional soft magnetic materials, such as silicon steel, begin to significantly impact motor efficiency as rotational speed increases. Soft magnetic composites (SMCs), which combine magnetic particles with an insulating matrix to boost electrical resistivity (ρ) and decrease eddy current losses, even at higher operating frequencies (or rotational speeds), are an attractive solution. Today, SMCs are being fabricated with values of ρ ranging between 10 -3 to 10 -1 μohm∙m, which is significantly higher than 3% silicon steel (~0.05 μohm∙m). The isotropic nature of SMCs is ideally suited for motors with 3D flux paths, such as axial flux motors. Additionally, the manufacturing cost of SMCs is low and they are highly amenable to advanced manufacturing and net-shaping into complex geometries, which further reduces manufacturing costs. There is still significant room for advancement in SMCs, and therefore additional improvements in electrical machine performance. For example, despite the inclusion of a non-magnetic insulating material, the electrical resistivities of SMCs are still far below that of soft ferrites (10 – 10 8 μohm∙m).

33 ADVANCED PROPULSION SYSTEMS↗

Distinct critical behaviors from the same state in quantum spin and population dynamics perspectives

There is a deep connection between the ground states of transverse-field spin systems and the late-time distributions of evolving viral populations—within simple models, both are obtained from the principal eigenvector of the same matrix. However, that vector is the wave-function amplitude in the quantum spin model, whereas it is the probability itself in the population model. We show that this seemingly minor difference has significant consequences: Phase transitions that are discontinuous in the spin system become continuous when viewed through the population perspective, and transitions that are continuous become governed by new critical exponents. We introduce a more general class of models that encompasses both cases and that can be solved exactly in a mean-field limit. Numerical results are also presented for a number of one-dimensional chains with power-law interactions. We see that well-worn spin models of quantum statistical mechanics can contain unexpected new physics and insights when treated as population-dynamical models and beyond, motivating further studies.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electromagnetic Transient Simulation of Large-Scale Inverter-Based Resources With High-Granularity

The power grid is undergoing a significant transformation with the rapid increase in inverter-based resources (IBRs), including large-scale photovoltaic (PV) plants. Ensuring reliable and resilient grid operation in this new paradigm necessitates high-granularity electromagnetic transient (EMT) modeling that accurately captures the behavior of individual inverters and their interactions within IBR plants. Central to this approach is the detailed representation of both the IBR plant’s collector system and the dynamics of individual inverters. To achieve this, a high-granularity EMT model of a large-scale PV plant has been developed using advanced simulation algorithms, including matrix splitting and the Schur complement. These proposed techniques significantly enhance simulation speed, numerical stability, and accuracy while improving the modularity and efficiency of the collector system’s representation. The effectiveness of the proposed methods is validated through simulations of a representative large-scale PV plant consisting of 125 individual PV inverters, 25 IBR unit transformers, and a 52-bus collector system.

Choi, Jongchan [Oak Ridge National Laboratory (ORN↗

Multi-modal Approach to Modeling Creep Deformation in Nickel-base Superalloy

This study developed the multi-modal modeling approaches to elucidate the physical and overall mechanical properties of two complex alloy systems of Ni-based Superalloys, namely Haynes 282 and Inconel 740. The overall strategies employed systematically in different scales of modeling are based on the common structural framework of the multi phases that made up the Ni-based Superalloys, namely the matrix phase of the Gamma ($\gamma$) phase which is embedded with ordered Gamma prime ($\gamma$’) precipitates and decorated with the dispersions of mostly carbide precipitates. With this in mind, we had set up the modeling platforms to incorporate a wide range of scales, starting from electronic structures to the continuum level via the crystal plasticity model.

20 FOSSIL-FUELED POWER PLANTS↗

IGM damping wing constraints on the tail end of reionization from the enlarged XQR-30 sample

ABSTRACT The attenuation of Lyα photons by neutral hydrogen in the intergalactic medium (IGM) at z ≳ 5 continues to be a powerful probe for studying the epoch of reionization. Given a framework to estimate the intrinsic (true) Lyα emission of high-z sources, one can infer the ionization state of the IGM during reionization. In this work, we use the enlarged XQR-30 sample of 42 high-resolution and high signal-to-noise quasar spectra between $5.8\lesssim \, z\lesssim \, 6.6$ obtained with VLT/X-shooter to place constraints on the IGM neutral fraction. This is achieved using our existing Bayesian QSO reconstruction framework which accounts for uncertainties such as the: (i) posterior distribution of predicted intrinsic Lyα emission profiles (obtained via covariance matrix reconstruction of the Lyα and N v emission lines from unattenuated high-ionization emission line profiles; C iv, Si iv + O iv], and C iii]) and (ii) distribution of ionized regions within the IGM using synthetic damping wing profiles drawn from a 1.63 Gpc3 reionization simulation. Following careful quality control, we used 23 of the 42 available QSOs to obtain constraints/limits on the IGM neutral fraction during the tail-end of reionization. Our median and 68th percentile constraints on the IGM neutral fraction are: $0.20\substack{+0.14 -0.12}$ and $0.29\substack{+0.14 -0.13}$ at z = 6.15 and 6.35. Further, we also report 68th percentile upper limits of $\bar{x}_{\mathrm{H\, {\small I}}{}} \lt 0.21$, 0.20, 0.21, and 0.18 at z = 5.8, 5.95, 6.05, and 6.55. These results imply reionization is still ongoing at $5.8\lesssim \, z\lesssim \, 6.55$, consistent with previous results from XQR-30 (dark fraction and Lyα forest) along with other observational probes considered in the literature.

Greig, B. (ORCID:0000000240852094)↗

Bottom-Up Soft Magnetic Composites

In order to meet 2025 goals for enhanced peak power (100 kW), specific power (50 kW/L), and reduced cost (3.3 $/kW) in a motor that can operate at ≥ 20,000 rpm, improved soft magnetic materials must be developed. Better performing soft magnetic materials will also enable electric motors without rare earth elements. In fact, replacement of permanent magnets with soft magnetic materials was highlighted in the Electrical and Electronics Technical Team (EETT) Roadmap as a R&D pathway for meeting 2025 targets. Eddy current losses in conventional soft magnetic materials, such as silicon steel, begin to significantly impact motor efficiency as rotational speed is increased. Soft magnetic composites (SMCs), which combine magnetic particles with an insulating matrix to boost electrical resistivity (ρ) and decrease eddy current losses, even at higher operating frequencies (or rotational speeds), are an attractive solution. Today, SMCs are being fabricated with values of ρ ranging between 10 -3 to 10 -1 μohm∙m, which is significantly higher than 3% silicon steel (~0.5 μohm∙m). The isotropic nature of SMCs is ideally suited for motors with 3D flux paths, such as axial flux motors. Additionally, the manufacturing cost of SMCs is low and they are highly amenable to advanced manufacturing and net-shaping into complex geometries, which further reduces manufacturing costs. There is still significant room for advancement in SMCs, and therefore additional improvements in electrical machine performance. For example, despite the inclusion of a non-magnetic insulating material, the electrical resistivities of SMCs are still far below that of soft ferrites (10 – 10 8 μohm∙m).

36 MATERIALS SCIENCE↗

Eikonal spin-dependent odderon and gluon Sivers function of a proton and its small-𝑥 evolution

The matrix element in the proton of the eikonal Odderon operator, with a helicity flip, has been shown to correspond to the dipole gluon Sivers function. We employ a three quark light-front model of the proton to determine the Sivers function at moderately small 𝑥 0 ∼ 0.1 and transverse momentum 𝑘 ⊥ ≲ 1 GeV. The model light-cone (LC) wave function predicts the properties of 𝑥⁢𝑓$^{⊥⁢𝑔}_{1⁢𝑇⁡}$(𝑥,𝑘 ⊥ ) such as its overall magnitude, the position of its peak in 𝑘 ⊥ , and its behavior at small 𝑘 ⊥ . We then compute numerically the Balitsky-Fadin-Kuraev-Lipatov anomalous dimension characterizing the power-law tail at 𝑘 ⊥ ≳ 1.5 GeV of the gluon Sivers function at small (but preasymptotic) LC momentum fractions 𝑥 ∼ 𝑥 0 ⁢𝑒 −1/𝛼 𝑠 : 𝑥⁢𝑓$^{⊥⁢𝑔}_{1⁢𝑇⁡}$⁡(𝑥,𝑘 ⊥ ) ∼ 𝑘$^{−3.3}_{⊥}$.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

In Crystallo Photochemistry: Reimagining Synthetic Tractability with Transparent Single-Crystalline Flasks

Expanding the boundaries of synthetic tractability of what molecules can be synthesized and isolated is an eternal challenge for synthetic chemists. The development of new synthetic methods and strategies enables the properties and potential functions of novel molecular targets to be experimentally evaluated. In the context of catalysis, predictable synthetic strategies are often available to access kinetically persistent intermediates such as catalyst resting states. In contrast, synthesis and characterization of the reactive intermediates are often not possible due to the fleeting lifetimes of these species. In crystallo photochemistry combines single-crystal matrix isolation with cryogenic photochemistry to enable reactive intermediates to be synthesized under conditions in which they are persistent and can be (crystallographically) characterized. This Outlook highlights key achievements of in crystallo photochemistry as well as discusses opportunities and challenges that confront realization of the potential of in crystallo synthesis to redefine the boundaries of synthetic tractability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Expanded capabilities of the CarMa code in modeling resistive wall mode dynamics with 3-D conductors

In this work, an improved version of the CarMa code is presented, called CarMa-D, for the analysis of resistive wall modes (RWMs) in fusion devices, simultaneously considering the effects of volumetric three-dimensional conducting structures, plasma dynamics, toroidal rotation or drift-kinetic damping. Unlike static CarMa, CarMa-D does not rely on the simplifying assumptions such as neglecting the plasma mass, toroidal rotation and kinetic damping. The new coupling strategy is based on matrix-based Padé rational functions approximation of plasma a response. The arising mathematical model is formally equivalent to the original CarMa model, but with a higher number of degrees of freedom to model the dynamics of the plasma. CarMa-D overcomes the main limitations of the original CarMa, in particular: (i) the massless assumption for the plasma is removed, allowing modeling of global modes growing both on ideal kink time scales and in the typical RWM growth rate regime, with a suitable treatment of the model; (ii) the effects of toroidal plasma flow and drift kinetic damping can be included into the new model, providing a powerful tool to study macroscopic phenomena where both plasma dynamics and 3-D conducting structures play important roles.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Design Considerations for GPU-based Mixed Integer Programming on Parallel Computing Platforms

Mixed Integer Programming (MIP) is a powerful abstraction in combinatorial optimization that finds real-life application across many significant sectors. The recent proliferation of graphical processing unit (GPU)-based accelerated computing architectures in large-scale parallel computing or supercomputing presents new opportunities as well as challenges in the advancement of MIP solver technology to effectively use the new accelerated computing platforms and scale to large parallel systems. Here, we recount the conventional processor-based strategies and focus on configurations where the most promising intersection lies between parallel MIP solver approaches and the specific strengths of accelerated parallel platforms. We note that the best potential lies in solving problems whose individual matrix sizes (of the linear program relaxation) fit entirely within one accelerator's memory and whose branch-and-bound (or branch-and-cut) trees cannot be fully contained within a small number of computational nodes. Additionally, we identify ideal features of computational linear algebra support on GPU accelerators that would help advance this direction of scalable parallel solution of MIP problems on GPU-based accelerated computing architectures.

Perumalla, Kalyan↗

Towards Commercialization of Low-Cost, Crack-Tolerant, Screen-Printable Metallization by Full-Size Module Testing and Field Characterization

This project is motivated by the need to develop a materials engineering solution to reduce solar module degradation caused by cell cracks. The cell-crack-induced power loss is a long-term degradation mechanism and one of the main causes of solar panel field failures. Cell cracks can occur during module fabrication, transportation, installation, and long-term operation due to thermomechanical stressors. Our team’s internal estimation – based on the national weather pattern, frequency of severe weather, and 39- GW asset survey by Heliolytics – reveals that the cell-crack-induced module degradation translates to lost revenues >$17B over an average 5-year period for solar farm owners and to reduced reliability (<25 years panel lifetime) for solar energy consumers. In response to this challenge, the prime recipient offers a metal matrix composite (MMC) silver paste that is tailor-engineered for screen-printing gridlines and busbars, which serve as the electrical contacts on solar cells. We formulate our MMC paste by adding low-cost (∼0.02¢/WDC for research grade), surface-engineered carbon nanotubes to commercially available silver paste. The MMC paste offers a drop-in, cost-effective solution to cell cracks for solar cell and module manufacturers. The main goal of this project was to conduct field-relevant, module-level analysis and qualification of MMC metallization.

14 SOLAR ENERGY↗

Gate-Based Quantum Simulation of Gaussian Bosonic Circuits on Exponentially Many Modes

We introduce a framework for simulating, on an ( n + 1 )-qubit quantum computer, the action of a Gaussian bosonic (GB) circuit on a state over 2 n modes. Specifically, we encode the initial bosonic state’s expectation values over quadrature operators (and their covariance matrix) as an input qubit state. This is then evolved by a quantum circuit that effectively implements the symplectic propagators induced by the GB gates. We find families of GB circuits and initial states leading to efficient quantum simulations. For this purpose, we introduce a dictionary that maps between GB and qubit gates such that particle- (non-particle-) preserving GB gates lead to real- (imaginary-) time evolutions at the qubit level. For the special case of particle-preserving circuits, we present a bounded-error-quantum-polynomial time (BQP)-complete GB decision problem, indicating that GB evolutions of Gaussian states on exponentially many modes are as powerful as universal quantum computers. We also perform numerical simulations of an interferometer on ∼ 8 × 10 9 modes, illustrating the power of our framework. Published by the American Physical Society 2025

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗