Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “logic gate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Frequency Limitation Due to Switching Transition of the Bias Current in Bidirectional RSFQ Logic

Switching time limitations of the ac bias current of Josephson junctions in bidirectional rapid single flux quantum (RSFQ) logic circuits are investigated in order to determine the limits to the maximum possible operating frequency. We introduce a new approach based on modifying the bias current parameters and determining the inductance values in the circuit for reducing the switching transition time of the bias current through the junctions. We have simulated and optimized the timing and the operation of the bidirectional nondestructive readout and Josephson transmission line cells in this respect to demonstrate the results of utilizing the proposed approach. We successfully reduced the unwanted spike-type signals across the inductances which are made through the transitions during the fast switching times limiting the operation frequency. This is while we have also removed the consequent destructive spikes at the output. We have included the effects of other determining parameters of the circuit in this investigation and found their relatively optimal values to improve the temporal behavior of the bidirectional RSFQ cells. The results of the proposed approach leading to the fastest possible operation of the considered gates obtained in this work are thoroughly reported.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Ulysses: A functional description and simulation software system

Current design tools for digital circuits and systems are not well-integrated among the behavioral, gate, and transistor levels of design. Ulysses is a prototype software system that consists of a description language, a description compiler, and a simulator that make no distinction among these levels. The language is uniform over the entire range of logical descriptions, the description is hierarchical with no fundamental restrictions on depth or mixing of levels, and the simulator is fully integrated with the description. The structure of the language, compiler, and simulator are described in terms of their relationships to the abstractions of physical systems that are made in order to create logical descriptions and models of behavior.

Griswold, T. W.↗

Wafer-scale growth of two-dimensional, phase-pure InSe

Two-dimensional (2D) indium monoselenide (InSe) has attracted significant attention as an ultrathin III–VI semiconductor with a combination of favorable attributes that are comparable to those of III–V semiconductors and van der Waals 2D transition-metal dichalcogenides. Nevertheless, there has been no demonstration of large-area synthesis of 2D InSe due to the complexity of the binary In-Se system and the difficulties in promoting lateral growth. Here, we report the polymorph-selective synthesis of epitaxial 2D InSe by metal-organic chemical vapor deposition (MOCVD) over 2-in wafers. We achieve polymorph-selective epitaxial growth of InSe on c-plane sapphire via flow modulation to control the Se/In ratio. The layer-by-layer growth allows thickness control with tunable optical properties comparable to those of bulk crystals. We also demonstrate gate-tunable electrical transport with a field-effect mobility comparable to that of single-crystalline flakes. Importantly, these results indicate that InSe grown by MOCVD could be an effective channel material for back-end-of-line integration in logic transistors.

2D materials↗

Electron lithography STAR design guidelines. Part 2: The design of a STAR for space applications

The STAR design system developed by NASA enables any user with a logic diagram to design a semicustom digital MOS integrated circuit. The system is comprised of a library of standard logic cells and computr programs to place, route, and display designs implemented with cells from the library. Also described is the development of a radiation-hard array designed for the STAR system. The design is based on the CMOS silicon gate technology developed by SANDIA National Laboratories. The design rules used are given as well as the model parameters developed for the basic array element. Library cells of the CMOS metal gate and CMOS silicon gate technologies were simulated using SPICE, and the results are shown and compared.

Trotter, J. D.↗

Flexible Peripheral Component Interconnect Input/Output Card

The Flexible Peripheral Component Interconnect (PCI) Input/Output (I/O) Card is an innovative circuit board that provides functionality to interface between a variety of devices. It supports user-defined interrupts for interface synchronization, tracks system faults and failures, and includes checksum and parity evaluation of interface data. The card supports up to 16 channels of high-speed, half-duplex, low-voltage digital signaling (LVDS) serial data, and can interface combinations of serial and parallel devices. Placement of a processor within the field programmable gate array (FPGA) controls an embedded application with links to host memory over its PCI bus. The FPGA also provides protocol stacking and quick digital signal processor (DSP) functions to improve host performance. Hardware timers, counters, state machines, and other glue logic support interface communications. The Flexible PCI I/O Card provides an interface for a variety of dissimilar computer systems, featuring direct memory access functionality. The card has the following attributes: 8/16/32-bit, 33-MHz PCI r2.2 compliance, Configurable for universal 3.3V/5V interface slots, PCI interface based on PLX Technology's PCI9056 ASIC, General-use 512K 16 SDRAM memory, General-use 1M 16 Flash memory, FPGA with 3K to 56K logical cells with embedded 27K to 198K bits RAM, I/O interface: 32-channel LVDS differential transceivers configured in eight, 4-bit banks; signaling rates to 200 MHz per channel, Common SCSI-3, 68-pin interface connector.

Bigelow, Kirk K.↗

Quantum algorithm for the Laughlin wave function

We construct a quantum algorithm that creates the Laughlin state for an arbitrary number n of particles for a filling fraction of one. This quantum circuit is efficient since it only uses n(n-1)/2 local qudit gates and its depth scales as 2n-3. Furthermore, we prove the optimality of the circuit using permutation theory arguments and we compute exactly how entanglement develops along the action of each gate. Finally, we discuss its experimental feasibility by decomposing the qudits and the gates in terms of qubits and two qubit-gates, as well as its generalization to arbitrary filling fraction.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

SAIL Field Campaign X-Band Precipitation Radar Seasonal Surface Hydrometeor Phase Classification Value-Added Product Report

The Surface Atmosphere Integrated Field Laboratory (SAIL) campaign generated an unprecedented, multisensory record of cold-season precipitation in the Upper Colorado River Basin (UCRB). To complement the Surface Quantitative Precipitation Estimation (SQUIRE) snow water equivalent (SWE) product derived from the Colorado State University (CSU) X-band radar, a hydrometeor phase classification data set was developed to systematically identify phase of the near-surface precipitation. The algorithm uses Corrected Moments in Antenna Coordinates (CMAC) fields with semi-supervised classification (SSC) and fuzzy-logic hydrometeor classification (FHC) methods and maps hydrometeor classes to a compact set of phase classes suitable for Quantitative Precipitation Estimation (QPE) and hydrologic applications. We used SQUIRE grid projections to mitigate beam-blockage issues by selecting the near-surface gates for each beam as well as to make it directly usable for the QPE products.

54 ENVIRONMENTAL SCIENCES↗

AlGaN High Electron Mobility Transistor for High-Temperature Logic

Here we report on AlGaN high electron mobility transistor (HEMT)-based logic development, using combined enhancement- and depletion-mode transistors to fabricate inverters with operation from room temperature up to 500°C. Our development approach included: (a) characterizing temperature-dependent carrier transport for different AlGaN HEMT heterostructures, (b) developing a suitable gate metal scheme for use in high temperatures, and (c) over-temperature testing of discrete devices and inverters. Hall mobility data (from 30°C to 500°C) revealed the reference GaN-channel HEMT experienced a 6.9x reduction in mobility, whereas the AlGaN channel HEMTs experienced about a 3.1x reduction. Furthermore, a greater aluminum contrast between the barrier and channel enabled higher carrier densities in the two-dimensional electron gas for all temperatures. The combination of reduced variation in mobility with temperature and high sheet carrier concentration showed that an Al-rich AlGaN-channel HEMT with a high barrier-to-channel aluminum contrast is the best option for an extreme temperature HEMT design. Three gate metal stacks were selected for low resistivity, high melting point, low thermal expansion coefficient, and high expected barrier height. The impact of thermal cycling was examined through electrical characterization of samples measured before and after rapid thermal anneal. The 200-nm tungsten gate metallization was the top performer with minimal reduction in drain current, a slightly positive threshold voltage shift, and about an order of magnitude advantage over the other gates in on-to-off current ratio. After incorporating the tungsten gate metal stack in device fabrication, characterization of transistors and inverters from room temperature up to 500°C was performed. The enhancement-mode (e-mode) devices’ resistance started increasing at about 200°C, resulting in drain current degradation. This phenomenon was not observed in depletion-mode (d-mode) devices but highlights a challenge for inverters in an e-mode driver and d-mode load configuration.

42 ENGINEERING↗

Hardware Architecture Study for NASA's Space Software Defined Radios

This study defines a hardware architecture approach for software defined radios to enable commonality among NASA space missions. The architecture accommodates a range of reconfigurable processing technologies including general purpose processors, digital signal processors, field programmable gate arrays (FPGAs), and application-specific integrated circuits (ASICs) in addition to flexible and tunable radio frequency (RF) front-ends to satisfy varying mission requirements. The hardware architecture consists of modules, radio functions, and and interfaces. The modules are a logical division of common radio functions that comprise a typical communication radio. This paper describes the architecture details, module definitions, and the typical functions on each module as well as the module interfaces. Trade-offs between component-based, custom architecture and a functional-based, open architecture are described. The architecture does not specify the internal physical implementation within each module, nor does the architecture mandate the standards or ratings of the hardware used to construct the radios.

Reinhart, Richard C.↗

A nanoscale photonic thermal transistor for sub-second heat flow switching

Abstract Control of heat flow is critical for thermal logic devices and thermal management and has been explored theoretically. However, experimental progress on active control of heat flow has been limited. Here, we describe a nanoscale radiative thermal transistor that comprises of a hot source and a cold drain (both are ~250 nm-thick silicon nitride membranes), which are analogous to the source and drain electrodes of a transistor. The source and drain are in close proximity to a vanadium oxide (VO x )-based planar gate electrode, whose dielectric properties can be adjusted by changing its temperature. We demonstrate that when the gate is located close ( < ~1 µm) to the source-drain device and undergoes a metal-insulator transition, the radiative heat transfer between the source and drain can be changed by a factor of three. More importantly, our nanomembrane-based thermal transistor features fast switching times ( ~ 500 ms as opposed to minutes for past three-terminal thermal transistors) due to its small thermal mass. Our experiments are supported by detailed calculations that highlight the mechanism of thermal modulation. We anticipate that the advances reported here will open new opportunities for designing thermal circuits or thermal logic devices for advanced thermal management.

42 ENGINEERING↗

Fast frequency divider circuit using combinational logic

The various technologies presented herein relate to performing on-chip frequency division of an operating frequency of a ring oscillator (RO). Per the various embodiments herein, a conflict between RO size versus operational frequency can be addressed by dividing the output frequency of the RO to a frequency that can be measured on-chip. A frequency divider circuit (comprising NOR gates and latches, for example) can be utilized in conjunction with the RO on the chip. In an embodiment, the frequency divider circuit can include a pair of latches coupled to the RO to facilitate dividing the oscillating frequency of the RO by 2. In another embodiment, the frequency divider circuit can include four latches (operating in pairs) coupled to the RO to facilitate dividing the oscillating frequency of the RO by 4. A plurality of ROs can be MUXed to the plurality of ROs by a single oscillation-counting circuit.

47 OTHER INSTRUMENTATION↗

High-dimensional optical quantum logic in large operational spaces

The probabilistic nature of single-photon sources and photon–photon interactions encourages encoding as much quantum information as possible in every photon for the purpose of photonic quantum information processing. Here, by encoding high-dimensional units of information (qudits) in time and frequency degrees of freedom using on-chip sources, we report deterministic two-qudit gates in a single photon with fidelities exceeding 0.90 in the computational basis. Constructing a two-qudit modulo SUM gate, we generate and measure a single-photon state with nonseparability between time and frequency qudits. We then employ this SUM operation on two frequency-bin entangled photons—each carrying two 32-dimensional qudits—to realize a four-party high-dimensional Greenberger–Horne–Zeilinger state, occupying a Hilbert space equivalent to that of 20 qubits. Although high-dimensional coding alone is ultimately not scalable for universal quantum computing, our design shows the potential of deterministic optical quantum operations in large encoding spaces for practical and compact quantum information processing protocols.

97 MATHEMATICS AND COMPUTING↗

Non-Destructive State Machine Reverse Engineering

Most of the integrated circuits (ICs) that are in electronic systems today are based on state machines. We are taking advantage of this to develop a hardware reverse engineering method that discovers the IC’s underlying state machine, rather than its transistors and gates. While there are other methods for destructively reverse engineering ICs or for non-destructively characterizing ICs, our method offers a fast and accurate analysis while remaining non-destructive. To do this, we present an intelligent brute-force method of exploring the logic of the IC using only the input and outputs designed into the IC - the I/O pins. From this exploration, we can apply a folding algorithm to discover the designed state machine.

counterfeit↗

A comparison of two fast binary adder configurations

Conditional sum and binary lookahead carry are two methods for performing fast binary addition. These methods are quite different, but the adders have a common feature that makes them interesting to compare. Both adders have the carry generating logic implemented as a binary tree, which grows in depth as log(sub 2) n,n equals the number of bits in the adder. The delay in the carry paths also grows in proportion to log(sub 2) n. This paper shows that the Transmission-Gate Conditional-Sum adder and the binary lookahead carry adder have the same speed of addition, but that the conditional sum adder requires only 46 percent of the area.

Canaris, J.↗

New Instrumentation, Patterns and Their Effects on TID Testing of Antifuse-Based FPGAs

TID-induced leakage currents for some families of antifuse-based Field Programmable Gate Array (FPGA) devices are significantly affected by the state of bias of a device's internal nodes; proper consideration of this effect is essential for proper testing of these devices and interpretation of test results. Variations in TID performance based on utilization of different internal logic modules for implementing identical circuits may be utilized by circuit designers for improvement in TID performance by tailoring the placement algorithm. Propagation delays are significantly affected by TID-induced damage for the devices of 54SX32S family.

Kleyner, Igor↗

E-1039 "SpinQuest" FPGA Trigger

The SpinQuest experiment will measure an azimuthal asymmetry in the Drell-Yan production of $\mu+$ $\mu-$ pairs from 120 GeV/c proton interactions with polarized nucleons to extract the Sivers function for $\bar{u}$ and $\bar{d}$. A large combinatorial background from muons produced in the beam dump requires a trigger which is capable of identifying dimuon pairs originating from the target in a high rate environment. The trigger system consists of four stations of scintillator hodoscopes whose 96 channels are digitized and processed by field-programmable gate array (FPGA) based VMEbus modules. Hodoscope hit patterns are compared to predetermined sets, chosen from Monte Carlo simulations, in a tiered lookup table to generate trigger decisions. The design and current status of the FPGA trigger will be presented and planned upgrades to the trigger logic will be discussed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Minimal-memory realization of pearl-necklace encoders of general quantum convolutional codes

Quantum convolutional codes, like their classical counterparts, promise to offer higher error correction performance than block codes of equivalent encoding complexity, and are expected to find important applications in reliable quantum communication where a continuous stream of qubits is transmitted. Grassl and Roetteler devised an algorithm to encode a quantum convolutional code with a ''pearl-necklace'' encoder. Despite their algorithm's theoretical significance as a neat way of representing quantum convolutional codes, it is not well suited to practical realization. In fact, there is no straightforward way to implement any given pearl-necklace structure. This paper closes the gap between theoretical representation and practical implementation. In our previous work, we presented an efficient algorithm to find a minimal-memory realization of a pearl-necklace encoder for Calderbank-Shor-Steane (CSS) convolutional codes. This work is an extension of our previous work and presents an algorithm for turning a pearl-necklace encoder for a general (non-CSS) quantum convolutional code into a realizable quantum convolutional encoder. We show that a minimal-memory realization depends on the commutativity relations between the gate strings in the pearl-necklace encoder. We find a realization by means of a weighted graph which details the noncommutative paths through the pearl necklace. The weight of the longest path in this graph is equal to the minimal amount of memory needed to implement the encoder. The algorithm has a polynomial-time complexity in the number of gate strings in the pearl-necklace encoder.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A parallel algorithm for multi-level logic synthesis using the transduction method

The Transduction Method has been shown to be a powerful tool in the optimization of multilevel networks. Many tools such as the SYLON synthesis system (X90), (CM89), (LM90) have been developed based on this method. A parallel implementation is presented of SYLON-XTRANS (XM89) on an eight processor Encore Multimax shared memory multiprocessor. It minimizes multilevel networks consisting of simple gates through parallel pruning, gate substitution, gate merging, generalized gate substitution, and gate input reduction. This implementation, called Parallel TRANSduction (PTRANS), also uses partitioning to break large circuits up and performs inter- and intra-partition dynamic load balancing. With this, good speedups and high processor efficiencies are achievable without sacrificing the resulting circuit quality.

Lim, Chieng-Fai↗