Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ionic liquid”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

IMIDAZOLE-BASED IONIC LIQUIDS FOR USE IN POLYMER ELECTROLYTE MEMBRANE FUEL CELLS: EFFECT OF ELECTRON-WITHDRAWING AND ELECTRON-DONATING SUBSTITUENTS

Current polymer electrolyte membrane fuel cells (PEMFCs) require humidifi cation for acceptable proton conductivity. Development of a novel polymer that is conductive without a water-based proton carrier is desirable for use in automobiles. Imidazole (Im) is a possible replacement for water as a proton solvent; Im can be tethered to the polymer structure by means of covalent bonds, thereby providing a solid state proton conducting membrane where the solvating groups do not leach out of the fuel cell. These covalent bonds can alter the electron availability of the Im molecule. This study investigates the effects of electron-withdrawing and electron-donating substituents on the conductivity of Im complexed with methanesulfonic acid (MSA) in the form of ionic liquids. Due to the changes in the electronegativity of nitrogen, it is expected that 2-phenylimidazole (2-PhIm, electron-withdrawing) will exhibit increased conductivity compared to Im, while 2-methylimidazole (2-MeIm, electron-donating) will exhibit decreased conductivity. Three sets of ionic liquids were prepared at defi ned molar ratios: Im-MSA, 2-PhIm-MSA, and 2-MeIm- MSA. Differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and 1H-NMR were used to characterize each complex. Impedance analysis was used to determine the conductivity of each complex. Both the 2-PhIm-MSA and 2-MeIm-MSA ionic liquids were found to be less conductive than the Im-MSA complex at base-rich compositions, but more conductive at acid-rich compositions. 1H-NMR data shows a downfi eld shift of the proton on nitrogen in 2-PhIm compared to Im, suggesting that other factors may diminish the electronic effects of the electron withdrawing group at base-rich compositions. Further studies examining these effects may well result in increased conductivity for Im-based complexes. Understanding the conductive properties of Im-derivatives due to electronic effects will help facilitate the development of a new electrolyte appropriate for automotive fuel cell use.

Chang, E↗

Hydrophobic polymerized ionic liquids for trace metal solid phase extraction: thallium transfer from hydrochloric acid media

It is known that some neat room-temperature hydrophobic ionic liquids can extract metallic species from aqueous solutions. The unique properties of such organic media allow for the application of polymerization techniques to convert the liquid organic phase to a solid one. In this work, a pyrrolidinium-based ionic liquid and a corresponding polymer with bis(trifluoromethanesulfonyl)imide counter anion have been considered for optimization of thallium(III) migration in liquid-liquid and solid-liquid extraction systems. Neither trivalent indium nor monovalent thallium were absorbed by the polymer layer. A mathematical model to describe the mechanism of metal extraction in these systems has been developed. Thermodynamic parameters as adsorption enthalpy, entropy, and Gibbs energy have also been determined.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pulsed laser irradiation-assisted electrodeposition of germanium in ionic liquid: From amorphous film to polycrystalline branched structures

Highlights: • Ge branched structures was prepared by electrodeposition in ([EMIm]Tf2N) ionic liquid with laser irradiation. • The crystallinity of Ge with laser irradiation is obviously improved compared to the Ge film without laser irradiation. • By controlling the deposition time, the nanostructures with different morphology and size are obtained. - Abstract: The effect of a pulsed laser on the electrodeposition of germanium on indium tin oxide glass in the ionic liquid 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([EMIm]Tf{sub 2}N) was investigated. Cyclic voltammetric analysis of GeCl{sub 4} in [EMIm]Tf{sub 2}N showed that laser irradiation produced a positive shift of the reduction potential and an increase in the reduction current. Laser irradiation influenced the morphology and crystallinity of the Ge deposits. A deposition time of 1200 s gave rise to amorphous Ge deposits when laser irradiation was not applied, whereas laser irradiation led to a polycrystalline branched structure. The length and width of the branched structures were about 9.58 and 2.18 μm, respectively, and the average grain size of the sample was ∼76 nm. The morphology and size of the Ge deposits could be controlled by adjusting the deposition time under laser irradiation. The mechanism of growth of the Ge deposits under laser irradiation was discussed in detail.

36 MATERIALS SCIENCE↗

Directed Synthesis of Nanoporous Carbons from Task-Specific Ionic Liquid Precursors for the Adsorption of CO 2

Postcombustion CO 2 capture has become a key component of greenhouse-gas reduction as anthropogenic emissions continue to impact the environment. In this paper, we report a one-step synthesis of porous carbon materials using a series of task-specific ionic liquids for the adsorption of CO 2 . By varying the structure of the ionic liquid precursor, we were able to control pore architecture and surface functional groups of the carbon materials in this one-step synthesis process leading to adsorbents with high CO 2 sorption capacities (up to 4.067 mmol g -1 ) at 0 °C and 1 bar. Finally, added nitrogen functional groups led to high CO 2 /N 2 adsorption-selectivity values ranging from 20 to 37 whereas simultaneously the interaction energy was enhanced relative to carbon materials with no added nitrogen.

54 ENVIRONMENTAL SCIENCES↗

Tube-in-tube ionic liquid heat exchanger employing a selectively permeable tube

A tube-in-tube heat exchanger utilizes a selectively permeable tube having a selective permeable layer to allow the refrigerant to transfer into an ionic liquid to generate heating or cooling. The ionic liquid then provides heating or cooling to a heat transfer fluid through a non-permeable layer or tube. The system may be configured as a shell and tube design, with the third fluid free to flow on the outside of the shell, or as a shell and tube-in-tube, with a central tube containing a first liquid, a second tube containing a second liquid, and an outer shell containing the third liquid. The selectively permeable tube may include an anion or cation selectively permeable layer and this layer may be supported by a support layer or tube.

Bahar, Bamdad↗

Tube-in-tube ionic liquid heat exchanger employing a selectively permeable tube

A tube-in-tube heat exchanger utilizes a selectively permeable tube having a selective permeable layer to allow the refrigerant to transfer into an ionic liquid to generate heating or cooling. The ionic liquid then provides heating or cooling to a heat transfer fluid through a non-permeable layer or tube. The system may be configured as a shell and tube design, with the third fluid free to flow on the outside of the shell, or as a shell and tube-in-tube, with a central tube containing a first liquid, a second tube containing a second liquid, and an outer shell containing the third liquid. The selectively permeable tube may include an anion or cation selectively permeable layer and this layer may be supported by a support layer or tube.

Bahar, Bamdad↗

Pairing mechanism among ionic liquid ions in aqueous solutions. A molecular dynamics study

In this study, we carried out molecular dynamics simulations to examine the molecular mechanism for ionic liquid pair association in aqueous solutions. We chose the commonly studied imidazolium-based ionic liquid pairs. We computed potentials of mean force (PMF) for four systems—1,3-dimethlylimidazoliumchloride; 1,3-dimethlylimidazolium iodide; 1-methly-3-octylimidazolium chloride; and 1-methly-3-octylimidazolium iodide. Our PMF studies show a stronger interaction for the ion pairs of systems involving dimethlylimidazolium as the cation species compared to that of the systems containing octylimidazolium. This result indicates a decrease in ion-pair association as the cation alkyl tail length increases. We also studied the kinetics of ion-pair dissociation using different rate theories such as the Grote-Hynes and Kramer’s theories. As expected, the computed rate results significantly deviated from results obtained from transition state theory because it does not account for dynamical solvent effects. Dissociative barrier curvatures are found to be very small for the systems investigated because the transmission coefficients computed using Grote-Hynes theory and Kramer’s theory are approximately equal. Our analysis of the rotational dynamics of cations revealed that the time scales for molecular reorientation are longer for cations with longer alkyl tails. This work was supported by the U.S. Department of Energy (DOE), Office of Basic Energy Sciences (BES), Division of Chemical Sciences, Geosciences, and Biosciences. Pacific Northwest National Laboratory is a multiprogram national laboratory operated for DOE by Battelle. The calculations were carried out using computer resources provided by BES.

Annapureddy, Harsha V.↗

Unveiling the transport properties of protic ionic liquids: Lithium ion dynamics modulated by the anion fluorine reservoir

Protic ionic liquids (PILs) show great potential as electrolyte components for energy storage devices. A comprehensive understanding of their transport properties must be achieved to optimize the design of safer and efficient electrolytes. This study focuses on a series of PILs based on the DBUH + cation (protonated 1,8-diazabicyclo[5,4,0]–undec-7-ene superbase) and three anions derived from strong acids: TFO – (triflate), IM14 – (perfluorobutyl-trifluoromethylsulfonylimide) and TFSI – (bis(trifluoromethylsulfonyl)imide). Neat PILs and PILs doped with LiTFO, LiIM14, and LiTFSI were studied using temperature-dependent NMR diffusion and relaxation techniques. The ionicity of these systems was also evaluated. Results revealed that the dynamic behaviour of lithium ions, as well as ionicity, strongly depend on the structural features of the anions, particularly in the case of IM14 – , whose main feature is the uneven distribution of the fluorinated sidegroups. The 19 F relaxation rates in IM14 – provide insights into the rotational reorientation of that anion. DBUH-IM14 exhibited diffusion coefficients lower than the expected ones on the basis of its viscosity, likely due to fluorophilic intermolecular interactions involving the fluorinated terminal groups. The presence of Li + in the DBUH-IM14 electrolyte led to unexpected and relatively faster translational mobility of Li + ions, resulting in a higher lithium apparent transference number. However, the trends observed in ionicity indicate a more complex interplay between intermolecular interactions and ion correlations. While DBUH-TFSI showed minimal effect of Li + addition, DBUH-TFO and DBUH-IM14 exhibited a significant decrease in ionicity, possibly attributed to strong interactions between ions.

25 ENERGY STORAGE↗

Temperature-dependent structure of ionic liquids: X-ray scattering and simulations

In this article we determine the temperature-dependent structure of the tetradecyltrihexylphosphonium bis(trifluoromethylsulfonyl)amide ionic liquid using a combination of X-ray scattering and molecular dynamics simulations. As in many other room-temperature ionic liquids three characteristic intermolecular peaks can be detected in the structure function S(q). A prepeak or first sharp diffraction peak is observed at about q = 0.42 {angstrom}{sup -1}. Long range anion-anion correlations are the most important contributors to this peak. In all systems we have studied to date, this prepeak is a signature of solvation asymmetry. The peak in S(q) near q = 0.75 {angstrom}{sup -1} is the signature of ionic alternation and arises from the charge ordered separation of ions of the same charge. The most intense diffraction peak near q = 1.37 {angstrom}{sup -1} arises from short-range separation between ions of opposite charge combined with a significant contribution from cationic carbon-carbon interactions, indicating that cationic hydrophobic tails have significant contacts.

Kashyap, Hemant K.↗

Low-frequency Raman spectra and fragility of imidazolium ionic liquids

Raman spectra within the 5-200 cm{sup -1} range have been recorded as a function of temperature for different ionic liquids based on imidazolium cations. A correlation has been found between fragility and the temperature dependence of the strength of fast relaxational motions. Understanding quasielastic scattering as the relaxational contribution to ionic mean-squared displacement elucidates some effects on ionic liquids' fragility resulting from modifications in the chemical structure.

36 MATERIALS SCIENCE↗

Nitrogen-doped carbons derived from poly(ionic liquid)s with various backbones and cations

In this study, poly(ionic liquid)s (PILs) with various backbone/cation pairings (backbones - ethyl methacrylate, styrene; covalently attached cations - butylimidazolium, trimethylammonium, butylpyrrolidinium) were successfully synthesized as carbon precursors. Pyrolysis of PILs produced carbons with sheet-like structures with a metallic luster in contrast to the powder form of carbons produced from polyacrylonitrile. The results also show that cation type has a significant impact on surface area, graphitic content, graphitic nitrogen content, nitrogen retention, carbon yield and surface chemistry of the PIL-derived carbons. The design of nitrogen-doped carbons based on a diverse set of PILs with various cation and polymer backbone chemistries may be an effective strategy to optimize carbon properties for subsequent application in energy storage devices.

36 MATERIALS SCIENCE↗

Morphology-enhanced conductivity in dry ionic liquids

The size polarity and tail stiffness of amphiphilic ionic liquid molecules can be tailored to obtain 3D continuous ionic channels possessing isotropic conductivities.

catalysis (homogeneous), solar (photovoltaic), bio↗

Anion effects in the extraction of lanthanide 2-thenoyltrifluoroacetone complexes into an ionic liquid

The extraction of trivalent lanthanides from an aqueous phase containing 1 M NaClO{sub 4} into the room temperature ionic liquid 1-butyl-3-methylimidazolium nonafluoro-1-butane sulfonate by the beta-diketone extractant 2-thenoyltrifluoroacetone (Htta) was studied. Radiotracer distribution, absorption spectroscopy, time-resolved laser-induced fluorescence spectroscopy, and X-ray absorption fine structure measurements point to the extraction of multiple lanthanide species. At low extractant concentrations, fully hydrated aqua cations of the lanthanides are present in the ionic liquid phase. As the extractant concentration is increased 1:2 and 1:3 lanthanide:tta species are observed. In contrast, 1:4 Ln:tta complexes were observed in the extraction of lanthanides by Htta into 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide. (authors)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigation of Dynamics in BMIM TFSA Ionic Liquid through Variable Temperature and Pressure NMR Relaxometry and Diffusometry

A comprehensive variable temperature, pressure and frequency multinuclear ( 1 H, 2 H, and 19 F) magnetic resonance study was undertaken on selectively deuterated 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)amide (BMIM TFSA) ionic liquid isotopologues. This study builds on our earlier investigation of the effects of increasing alkyl chain length on diffusion and dynamics in imidazolium-based TFSA ionic liquids. Fast field cycling 1 H T 1 data revealed multiple modes of motion. Through calculation of diffusion coefficient (D) values and activation energies, the low- and high-field regimes were assigned to the translational and reorientation dynamics respectively. Variable-pressure 2 H T 1 measurements reveal site-dependent interactions in the cation with strengths in the order MD 3 > CD 3 > CD 2 , indicating dissimilarities in the electric field gradients along the alkyl chain, with the CD 2 sites having the largest gradient. Additionally, the α saturation effect in T 1 vs. P was observed for all three sites, suggesting significant reduction of the short-range rapid reorientational dynamics. This reduction was also deduced from the variable pressure 1 H T 1 data, which showed an approach to saturation for both the methyl and butyl group terminal methyl sites. Pressure-dependent D measurements show independent motions for both cations and anions, with the cations having greater D values over the entire pressure range.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Operando STM study of the interaction of imidazolium-based ionic liquid with graphite

Understanding interactions at the interfaces of carbon with ionic liquids (ILs) is crucially beneficial for the diagnostics and performance improvement of electrochemical devices containing carbon as active materials or conductive additives in electrodes and ILs as solvents or additives in electrolytes. The interfacial interactions of three typical imidazolium-based ILs, 1-alkyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide (AMImTFSI) ILs having ethyl (C 2 ), butyl (C 4 ) and octyl (C 8 ) chains in their cations, with highly oriented pyrolytic graphite (HOPG) were studied in-situ by electrochemical scanning tunneling microscopy (EC-STM). The etching of HOPG surface and the exfoliation of graphite/graphene flakes as well as cation intercalation were observed at the HOPG/C 2 MImTFSI interface. The etching also takes place in C 4 MImTFSI at -1.5 V vs Pt but only at step edges with a much slower rate, whereas C 8 MIm + cations adsorbs strongly on the HOPG surface under similar conditions with no observable etching or intercalation. Finally, the EC-STM observations can be explained by the increase in van der Waals interaction between the cations and the graphite surface with increasing length of alkyl chains.

25 ENERGY STORAGE↗

New Functionality of Ionic Liquids as Lubricant Additives: Mitigating Rolling Contact Fatigue

Oil-soluble ionic liquids (ILs) have recently been demonstrated as effective lubricant additives of friction reduction and wear protection for sliding contacts. However, their functionality in mitigating rolling contact fatigue (RCF) is little known. Because of the distinct surface damage modes, different types of surface protective additives often are used in lubricants for sliding and rolling contacts. Therefore, the lubricating characteristics and mechanisms of ILs learned in sliding contacts from the earlier work may not be translatable to rolling contacts. This study explores the feasibility of using phosphonium-phosphate, ammonium-phosphate, and phosphonium-carboxylate ILs as candidate additives in rolling–sliding boundary lubrication, and results suggested that an IL could be either beneficial or detrimental on RCF depending on its chemistry. Particularly, the best-performing phosphonium-phosphate IL at 2% addition made a low-viscosity base oil significantly outperform a more viscous commercial gear oil in reducing the RCF surface damage and associated vibration noise. This IL generated a thicker, smoother, and more homogeneous tribofilm compared with commercial additives, which is likely responsible for the superior RCF protection. Results here suggest good potential for using appropriate IL additives to allow the use of low-viscosity gear and axle fluids for improved efficiency and durability.

36 MATERIALS SCIENCE↗

Generation of a platform strain for ionic liquid tolerance using adaptive laboratory evolution

There is a need to replace petroleum-derived with sustainable feedstocks for chemical production. Certain biomass feedstocks can meet this need as abundant, diverse, and renewable resources. Specific ionic liquids (ILs) can play a role in this process as promising candidates for chemical pretreatment and deconstruction of plant-based biomass feedstocks as they efficiently release carbohydrates which can be fermented. However, the most efficient pretreatment ILs are highly toxic to biological systems, such as microbial fermentations, and hinder subsequent bioprocessing of fermentative sugars obtained from IL-treated biomass. To generate strains capable of tolerating residual ILs present in treated feedstocks, a tolerance adaptive laboratory evolution (TALE) approach was developed and utilized to improve growth of two different Escherichia coli strains, DH1 and K-12 MG1655, in the presence of two different ionic liquids, 1-ethyl-3-methylimidazolium acetate ([C 2 C 1 Im][OAc] ) and 1-butyl-3-methylimidazolium chloride ([C 4 C 1 Im]Cl). For multiple parallel replicate populations of E. coli , cells were repeatedly passed to select for improved fitness over the course of approximately 40 days. Clonal isolates were screened and the best performing isolates were subjected to whole genome sequencing. The most prevalent mutations in tolerant clones occurred in transport processes related to the functions of mdtJI , a multidrug efflux pump, and yhdP , an uncharacterized transporter. Additional mutations were enriched in processes such as transcriptional regulation and nucleotide biosynthesis. Finally, the best-performing strains were compared to previously characterized tolerant strains and showed superior performance in tolerance of different IL and media combinations (i.e., cross tolerance) with robust growth at 8.5% (w/v) and detectable growth up to 11.9% (w/v) [C 2 C 1 Im][OAc]. The generated strains thus represent the best performing platform strains available for bioproduction utilizing IL-treated renewable substrates, and the TALE method was highly successful in overcoming the general issue of substrate toxicity and has great promise for use in tolerance engineering.

59 BASIC BIOLOGICAL SCIENCES↗

Membrane contactor assisted extraction/reaction process employing ionic liquids

The present invention relates to a functionalized membrane contactor extraction/reaction system and method for extracting target species from multi-phase solutions utilizing ionic liquids. One preferred embodiment of the invented method and system relates to an extraction/reaction system wherein the ionic liquid extraction solutions act as both extraction solutions and reaction mediums, and allow simultaneous separation/reactions not possible with prior art technology.

47 OTHER INSTRUMENTATION↗