SEARCH · Engineering Papers

Results for “hot wire”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

All sources NASA NTRS DOE OSTI

NASA NTRS1987

Near-wall turbulence alteration through thin streamwise riblets

The possibility of improving the level of drag reduction associated with near-wall riblets is considered. The methodology involves the use of a hot-wire anemometer to study various surface geometries on small, easily constructed models. These models consist of small, adjacent rectangular channels on the wall aligned in the streamwise direction. The VITA technique is modified and applied to thin-element-array and smooth flat-plate data and the results are indicated schematically.

Wilkinson, Stephen P.↗

NASA NTRS1987

The near field behavior of turbulent gas jets in a long confinement

The near-field behavior of a turbulent gas jet (8.73 mm in diameter) in a long confinement was studied using a test rig with a confinement area ratio of about 205 and a length-to-jet diameter ratio of about 1700. Experiments were carried out with CO2, air, and He/air jets at different jet velocities, using a laser Doppler velocimeter for velocity and turbulence measurements and hot-wire anemometers for a detailed examination of the turbulent shear field of an air jet. The air column inside the tunnel was seen to be first compressed by the jet and then to be slowly pushed out of the tunnel, causing the jet to spread rapidly and to decay quickly. As a result, an equilibrium turbulence field is established in the first two diameters of the jet which bears a similarity to that found in self-preserving turbulent free jets and jets in short confinement. However, in contrast to the cases of the two latter jet types, the near field of jets in a long confinement is independent of jet fluid densities and velocities.

So, Ronald M. C.↗

NASA NTRS1987

The evolution of instabilities in the axisymmetric jet. I - The linear growth of disturbances near the nozzle. II - The flow resulting from the interaction between two waves

The modal distribution of coherent structures evolving near the nozzle of a circular jet was studied experimentally and theoretically, with particular attention given to the effects produced on the instability modes by transverse curvature, flow divergence, inhomogeneous inflow conditions, and the detailed shape of the mean velocity profile. Experiments were performed using a specially constructed air-jet facility; hot-wire anemometers were used in conjunction with Disa Model 55P11 sensors for flow measurements. The linear model used as a transfer function is capable of predicting the spectral distribution of the velocity perturbations in a jet. Consideration was also given to studies of leading nonlinear interactions generated by waves externally superimposed on an axisymmetric jet; theoretical predictions were verified experimentally.

Cohen, J.↗

NASA NTRS1987

An anemometer for highly turbulent or recirculating flows

An anemometer which determines flow velocity by ionizing air and sensing the convective displacement of the ions is described. It is suited to measurement in low speed, highly unsteady gas flows. Comparisons to hot wire spectra suggest the corona anemometer has adequate frequency response to make it a useful tool for fluid dynamics measurement.

Durbin, P. A.↗

NASA NTRS1987

Free-wake analysis of a rotor in hover

A numerical method based on the axisymmetric, incompressible Navier-Stokes equations is combined with a lifting surface code to predict the vortex wake of hovering rotors. The lifting surface code, AMI Hover, is used to obtain the circulation distribution on the blade. This circulation distribution is fed into the Navier-Stokes code to compute the vortex wake under this specified circulation distribution. An iteration approach is used between these two codes to converge the circulation distribution and the shape of the vortex wake. A relaxation scheme is developed to resolve the instability encountered among the tip vortices. A reconcentration scheme is used to solve the diffusion problem due to the strong artificial viscosity. The results from the present method are compared with experimental data obtained by smoke-flow visualization and hot-wire measurements for several rotor blade configurations. The comparisons show that the present method is able to predict the complex wake system shed by a hovering rotor.

Chen, C. S.↗

NASA NTRS1987

Designing transonic wind-tunnel test sections for flow diagnostics and laser velocimeter applications

The design, fabrication, and validation of the Basic Aerodynamic Facility (BARF), developed for the direct comparison of three-dimensional laser velocimetry (LV) and hot-wire techniques at transonic speeds, are discussed. To accommodate the installation of the three-dimensional orthogonal LV system in the BARF, the transonic slots were redesigned to house windows, and the test section mounting was redesigned to facilitate LV transversing. Two-dimensional and three-dimensional code validation tests of the LV test section showed uniform mean flow through the test section to sonic speeds, and fluctuating pressure measurements at subsonic speeds which are consistent with facilities with good flow quality.

Jones, G. S.↗

NASA NTRS1987

Visualization of the laminar separation bubble on airfoils at low Reynolds numbers

The use of the smoke tube and titanium tetrachloride techniques in the study of low Reynolds number flow about two different airfoils is presented. Emphasis is placed on the problems of determining the characteristics of laminar separation bubbles occurring on the Wortmann FX63-137 airfoil and the NACA 66(3)-018 airfoil. Comparisons are made with the hot-wire technique and the use of kerosene vapor.

Mueller, T. J.↗

NASA NTRS1988

Portable Airflow Meter

Compact hand-held instrument measures airflow. Consists of hot-wire anemometer probe in flow-straightening tube that reduces swirling. Configuration developed empirically to reduce length of instrument to practical dimension for use and storage in confined space. Two versions of new straightener only 17 and 18 in. long. Weighs less than 8 lb. and readily stored on Space Shuttle, developed to measure airflow in waster-collection system during flight. Used on Earth to measure airflow in ventilation systems, vacuum cleaners, and the like.

Burgett, Frank A.↗

NASA NTRS1987

The structure of separated flow regions occurring near the leading edge of airfoils including transition

All the time and effort was directed toward acquiring, reducing, and analyzing more hot-wire anemometer data. Some static pressure distribution data were also acquired to support the analysis of the velocity profile data. Laser Doppler Velocimetry data were not acquired due to equipment problems. Included were seven combinations of chord Reynolds number, angle of attack, and acoustic forcing using the NACA 663-018 airfoil. This research has as its objective the detailed documentation of the structure and behavior of the transitional separation bubble and the redeveloping boundary layer after reattachment over an airfoil at low Reynolds numbers. The intent is to further the understanding of the complex flow phenomena so that analytic methods for predicting their formulation and development can be improved. These analytic techniques have applications in the design and performance prediction of airfoils operating in the low Reynolds number flight regime.

Mueller, Thomas J.↗

NASA NTRS1986

Evaluation and certification of heater assemblies developed for thermal vacuum acceptance testing

Preparation of Rockwell International's Thermal Vacuum Chamber for acceptance testing of a mass produced satellite required the development of unique quartz lamp and hot wire heater assemblies. Testing performed on the basic elements of these heaters is described, as is the final testing done to certify that the heater assemblies meet the thermal requirements for acceptance testing. The methods and procedures of thermal mapping used during the development and final certification of these heater assemblies are presented. The absence of a definitive standard for determining flux distribution and heating boundaries for heaters of this type required the development of a test plan incorporating several thermal mapping techniques. These techniques include the development of heat flux using a multiple calorimeter array for both vacuum and ambient test conditions, and a photographic method for detecting heating boundaries. The test plan and thermal mapping techniques are discussed.

Allen, J. E.↗

NASA NTRS1985

Flow field measurements in a 90 degree turning duct

The objective of this investigation is the experimental evaluation of the influence of inlet turbulence intensity on secondary flow development in a turning duct. The existing 25.4 cm square turning duct (90) facility is being utilized to investigate of bulk turbulence levels on secondary flow development. The large scale duct flow facility allows detailed mean velocity and turbulence quantities to be measured at several streamwise planes in the curved duct. Non-intrusive laser velocimetry is being used to measure the mean and fluctuating components of velocity in all three orthogonal directions. To assure that the turbulence measurements are unbiased by particle lag and other effects, comparison hot wire data will be taken to validate the laser velocimetry system calibration.

Crawford, Roger A.↗

NASA NTRS1987

Measurement of velocity and vorticity fields in the wake of an airfoil in periodic pitching motion

The velocity field created by the wake of an airfoil undergoing a prescribed pitching motion was sampled using hot wire anemometry. Data analysis methods concerning resolution of velocity components from cross wire data, computation of vorticity from velocity time history data, and calculation of vortex circulation from vorticity field data are discussed. These data analysis methods are applied to a flow field relevant to a two dimensional blade-vortex interaction study. Velocity time history data were differentiated to yield vorticity field data which are used to characterize the wake of the pitching airfoil. Measurement of vortex strength in sinusoidal and nonsinusoidal wakes show vortices in the sinusoidal wake have stronger circulation and more concentrated vorticity distributions than the tailored nonsinusoidal wake.

Booth, Earl R., Jr.↗

NASA NTRS1987

Characteristics of a separating confluent boundary layer and the downstream wake

Measurements of pressure and velocity characteristics are presented and analyzed for flow over and downstream of a NACA 4412 airfoil equipped with a NACA 4415 single-slotted flap at high angle of attack and close to maximum lift. The flow remained attached over the main element while a large region of recirculating flow occurred over the aft 61 percent of the flap. The airfoil configuration was tested at a Mach number of 0.09 and a chord Reynolds number of 1.8x10 to the 6th power in the NASA Ames Research Center 7- by 10-Foot Wind Tunnel. Measurement of mean and fluctuation velocities were obtained in regions of recirculation and high turbulence intensity using 3-D laser velocimetry. In regions where the flow had a preferred direction and relatively low turbulence intensity, hot-wire anemometry was used. Emphasis was placed on obtaining characteristics in the confluent boundary layer, the region of recirculating flow, and in the downstream wake. Surface pressure measurements were made on the main airfoil, flap, wind tunnel roof and floor. It is thought likely that because the model is large when compared to the wind tunnel cross section, the wind tunnel floor and ceiling interference should be taken into account when the flow field is calculated.

Adair, Desmond↗

NASA NTRS1986

Low-disturbance wind tunnels

During the past years, there was an extensive program under way at the Langley Research Center to upgrade the flow quality in several of the large wind tunnels. This effort has resulted in significant improvements in flow quality in these tunnels and has also increased the understanding of how and where changes in existing and new wind tunnels are most likely to yield the desired improvements. As part of this ongoing program, flow disturbance levels and spectra were measured in several Langley tunnels before and after modifications were made to reduce acoustic and vorticity fluctuations. A brief description of these disturbance control features is given for the Low-Turbulence Pressure Tunnel, the 4 x 7 Meter Tunnel, and the 8 Foot Transonic Pressure Tunnel. To illustrate typical reductions in disturbance levels obtained in these tunnels, data from hot-wire or acoustic sensors are presented. A concept for a subsonic quiet tunnel designed to study boundary layer stability and transition is also presented. Techniques developed at Langley in recent years to eliminate the high intensity and high-frequency acoustic disturbances present in all previous supersonic wind tunnels are described. In conclusion, the low-disturbance levels present in atmospheric flight can now be simulated in wind tunnels over the speed range from low subsonic through high supersonic.

Beckwith, I. E.↗

NASA NTRS1987

Pattern recognition techniques for failure trend detection in SSME ground tests

The Space Shuttle Main Engine (SSME) is a complex power plant. To evaluate its performance 1200 hot-wire ground tests have been conducted, varying in duration from 0 to 500 secs. During the test some 500 sensors are sampled every 20 ms. The sensors are generally bounded by red lines so that an excursion beyond could lead to premature shutdown. In 27 tests it was not possible to effect an orderly premature shutdown, resulting in major incidents with serious damage to the SSME and test stand. The application of pattern recognition are investigated to detect SSME performance trends that may lead to major incidents. Based on the sensor data a set of (n) features is defined. At any time during the test, the state of the SSME is given by a point in the n-dimensional feature space. The history of a test can now be represented as a trajectory in the n-dimensional feature space. Portions of the normal trajectories and failed test trajectories would lie in different regions of the n-dimensional feature space. The latter can now be partitioned into regions of normal and failed tests. Thus, it is possible to examine the trajectory of a test in progress and predict if it is going into the normal or failure region.

Choudry, A.↗

NASA NTRS1987

An experimental investigation of straight and curved annular wall jets

Accurate turbulence measurements taken in wall jet flows are difficult to obtain, due to high intensity turbulence and problems in achieving two-dimensionality. The problem is compounded when streamwise curvature of the flow is introduced, since the jet entrainment and turbulence levels are greatly increased over the equivalent planar values. In this experiment, two-dimensional straight and curved incompressible wall jet flows are simulated by having a jet blow axially over a cylinder. Hot wire measurements and some Laser Doppler Velocimetry measurements are presented for straight and curved wall jet flows. The results for the straight wall showed good agreement between the annular flow data and the rectangular data taken by previous researchers. For the jets with streamwise curvature, there was agreement between the annular and corresponding rectangular jets for the flow region closest to the slot exit. An integral analysis was used as a simple technique to interpret the experimental results. Integral momentum calculations were performed for both straight and curved annular and two dimensional wall jets. The results of the calculation were used to identify transverse curvature parameters and to predict the values of those parameters which would delineate the region where the annular flow can satisfactorily simulate two dimensional flow.

Rodman, L. C.↗

NASA NTRS1987

Changes in the turbulent boundary layer structure associated with net drag reduction by outer layer manipulators

A specially designed wind tunnel was used to examine the effects of tandemly arranged parallel plate manipulators (TAPPMs) on a turbulent boundary-layer structure and the associated drag. Momentum balances, as well as measurements of the local shear stress from the velocity gradient near the wall, were used to obtain the net drag and local skin friction changes. Two TAPPMs, identical except for the thickness of their plates, were used in the study. Results with .003 inch plates were a maximum net drag reduction of 10 percent at 58 beta sub o (using a momentum balance). At 20 beta sub o, simultaneous laser sheet flow visualization and hot-wire anemometry data showed that the Reynolds stress in the large eddies was significantly reduced, as were the streamwise and normal velocity components. Using space-time correlations the reductions were again identified. Furthermore, quantitative flow visualization showed that the outward normal velocity of the inner region was also significantly decreased in the region around 20 beta sub o. However, throughout the first 130 beta sub o, the measured sublayer thickness with the TAPPMs in place was 15 to 20 percent greater. The data showed that the skin friction, as well as the structure of the turbulence, was strongly modified in the first 35 beta sub o, but that they both significantly relaxed toward unmanipulated boundary layer values by 50 beta sub o.

Rashidnia, N.↗

NASA NTRS1988

Characteristics of merging shear layers and turbulent wakes of a multi-element airfoil

Flow characteristics in the vicinity of the trailing edge of a single-slotted airfoil flap are presented and analyzed. The experimental arrangement consisted of a NACA 4412 airfoil equipped with a NACA 4415 flap whose angle of deflection was 21.8 deg. The flow remained attached over the model surfaces except in the vicinity of the flap trailing edge where a small region of boundary-layer separation extended over the aft 7 percent of flap chord. The flow was complicated by the presence of a strong, initially inviscid jet emanating from the slot between airfoil and flap, and a gradual merging of the main airfoil wake and flap suction-side boundary layer. Downstream of the flap, the airfoil and flap wakes fully merged to form an asymmetrical curved wake. The airfoil configuration was tested at an angle of attack of 8.2 deg, at a Mach number of 0.09, and a chord based Reynolds number of 1.8 x 10 to the 6th power in the Ames Research Center 7- by 10-Foot Wind Tunnel. Surface pressure measurements were made on the airfoil and flap and on the wind tunnel roof and floor. It was estimated that the wall interference increased the C sub L by 7 percent and decreased the C sub M by 4.5 percent. Velocity characteristics were quantified using hot-wire anemometry in regions of flow with preferred direction and low turbulence intensity. A 3-D laser velocimeter was used in regions of flow recirculation and relatively high turbulence intensity.

Adair, Desmond↗