Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “functional modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Reduction of spectroscopic overlap across the Z = 8 shell in neutron-rich nuclei

The recent discovery and spectroscopic measurements of 27 O and 28 O suggests the disappearance of the N = 20 shell structure in these neutron-rich oxygen isotopes. We measured one- and two-proton removal cross sections from 27 F and 29 N, respectively, extracting spectroscopic factors and comparing them to shell model overlap functions coupled with eikonal reaction model calculations. The invariant mass technique was used to reconstruct the two-body ( 24 O + n) and three-body ( 24 O + 2n) decay energies from knockout reactions of 27 F (106.2 MeV/u) and 29 Ne (112.8 MeV/u) beams impinging on a 9 Be target. The one-proton removal from 27 F strongly populated the ground state of 26 O and the extracted cross section of $3.4^{+0.3}_{-1.5}$ mb agrees with eikonal model calculations that are normalized by the shell model spectroscopic factors and account for the systematic reduction factor observed for single nucleon removal reactions within the models used. For the two-proton removal reaction from 29 Ne an upper limit of 0.08 mb was extracted for populating states in 27 O decaying though the ground state of 26 O. The measured upper limit for the population of the ground state of 26 O in the two-proton removal reaction from 29 Ne indicates a significant difference in the underlying nuclear structure of 27 F and 29 Ne.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1993

An architecture for object-oriented intelligent control of power systems in space

A control system for autonomous distribution and control of electrical power during space missions is being developed. This system should free the astronauts from localizing faults and reconfiguring loads if problems with the power distribution and generation components occur. The control system uses an object-oriented simulation model of the power system and first principle knowledge to detect, identify, and isolate faults. Each power system component is represented as a separate object with knowledge of its normal behavior. The reasoning process takes place at three different levels of abstraction: the Physical Component Model (PCM) level, the Electrical Equivalent Model (EEM) level, and the Functional System Model (FSM) level, with the PCM the lowest level of abstraction and the FSM the highest. At the EEM level the power system components are reasoned about as their electrical equivalents, e.g, a resistive load is thought of as a resistor. However, at the PCM level detailed knowledge about the component's specific characteristics is taken into account. The FSM level models the system at the subsystem level, a level appropriate for reconfiguration and scheduling. The control system operates in two modes, a reactive and a proactive mode, simultaneously. In the reactive mode the control system receives measurement data from the power system and compares these values with values determined through simulation to detect the existence of a fault. The nature of the fault is then identified through a model-based reasoning process using mainly the EEM. Compound component models are constructed at the EEM level and used in the fault identification process. In the proactive mode the reasoning takes place at the PCM level. Individual components determine their future health status using a physical model and measured historical data. In case changes in the health status seem imminent the component warns the control system about its impending failure. The fault isolation process uses the FSM level for its reasoning base.

Holmquist, Sven G.↗
NASA NTRS2002

A Simplified Model for an Evolving Protoplanetary Nebula

The dynamical evolution of the protoplanetary nebula is investigated using analytical solutions of the surface density transport equations. Constant and beta viscosity turbulence models are compared with a functional analytical model and the well-known alpha viscosity formulation. The beta viscosity model, heretofore used for steady-state disks, is shown to be a viable tool for separating dynamic and thermodynamic properties of an evolving disk.

Davis, Sanford S.↗
NASA NTRSDate not supplied

Constraints on triple oxygen isotope kinetics

Triple oxygen isotope measurements have been used as tracers for classifying meteorites, as indicators of atmospheric chemistry and as a proxy for primary productivity among other uses. These utilities rely on the mass dependency of most chemical reactions: δ17O is proportional to δ18O by roughly a factor of 0.5. However,in detail it is known that mass-dependency factorsvary. Constraints on mass dependency are well established for equilibrium isotope effects, but similar constraints for kinetic isotope effects are lacking.Here, we provide constraints for isotope effects generated by unidirectional chemical reactions (i.e. kinetic isotope effects, KIEs). A simplified Monte Carlo model is used to estimatethe range of kinetic isotope effects. It is found that the range of KIEs exceeds the range of equilibrium isotope effects such that some mass dependent kinetic isotope effects could be mistaken for being mass-independent. For the16O-17O-18O system,Δ′17Ovariations as large 0.8‰ can be generated from a single reaction step. Two case studies from published literature, on the thermal decomposition of calcite (CaCO3) and brucite (Mg(OH)2), are used to test the extreme limits of the modeled results. Isotope fractionationsgenerated fromdensity functional theory models of the surface reaction steps are shownto match the published data. The fractionation models are strictly mass dependent thus this result suggests thermal decomposition of calcite is also mass dependent. Although oxygen is the focus here, our approach applies to any system with more than two isotopes.

J. A. Hayles↗
DOE OSTI2021

Application of the Metabolic Modeling Pipeline in KBase to Categorize Reactions, Predict Essential Genes, and Predict Pathways in an Isolate Genome

The DOE Systems Biology Knowledgebase (KBase) platform offers a range of powerful tools for the reconstruction, refinement, and analysis of genome-scale metabolic models built from microbial isolate genomes. In this chapter, we describe and demonstrate these tools in action with an analysis of isoprene production in the Bacillus subtilis DSM genome. Two different methods are applied to build initial metabolic models for the DSM genome, then the models are gapfilled in three different growth conditions. Next, flux balance analysis (FBA) and flux variability analysis (FVA) techniques are applied to both study the growth of these models in minimal media and classify reactions within each model based on essentiality and functionality. The models are applied with the FBA method to predict essential genes, which are then compared to an updated list of essential genes obtained for B. subtilis 168, a very similar strain to the DSM isolate. The models are also applied to simulate Biolog growth conditions, and these results are compared with Biolog data collected for B. subtilis 168. Finally, the DSM metabolic models are applied to explore the pathways and genes responsible for producing isoprene in this strain. These studies demonstrate the accuracy and utility of models generated from the KBase pipelines, as well as exploring the tools available for analyzing these models.

Allen, Benjamin↗
DOE OSTI2022

Electrochemical CO2 Reduction over Metal-/Nitrogen-Doped Graphene Single-Atom Catalysts Modeled Using the Grand-Canonical Density Functional Theory

Renewably driven, electrochemical conversion of carbon dioxide into value-added products is expected to be a critical tool in global decarbonization. However, theoretical studies based on the computational hydrogen electrode largely ignore the nonlinear effects of the applied potential on the calculated results, leading to inaccurate predictions of catalytic behavior or mechanistic pathways. Here, we use grand canonical density functional theory (GC-DFT) to model electrochemical CO2 reduction (CO2R) over metal- and nitrogen-doped graphene catalysts (MNCs) and explicitly include the effects of the applied potential. We used GC-DFT to compute the CO2 to CO reaction intermediate energies at -0.3, -0.7, and -1.2 VSHE catalyzed by MNCs each doped with 1 of the 10 3d block metals coordinated by four pyridinic nitrogen atoms. Our results predict that Sc-, Ti-, Co-, Cu-, and Zn-N4Cs effectively catalyze CO2R at moderate to large reducing potentials (-0.7 to -1.2 VSHE). ZnN4C is a particularly promising electrocatalyst for CO2R to CO both at low and moderate applied potentials based on our thermodynamic analysis. Our findings also explain the observed pH independence of CO production over FeN4C and predict that the rate-determining step of CO2R over FeN4C is not *CO2- formation but rather *CO desorption. Additionally, the GC-DFT-computed density of states analysis illustrates how the electronic states of MNCs and adsorbates change non-uniformly with applied potential, resulting in a significantly increased *CO2- stability relative to other intermediates and demonstrating that the formation of the adsorbed *CO2- anion is critical to CO2R activation. This work demonstrates how GC-DFT paves the way for physically realistic and accurate theoretical simulations of reacting electrochemical systems.

CO2 reduction↗
NASA NTRS1993

Conventional modeling of the multilayer perceptron using polynomial basis functions

A technique for modeling the multilayer perceptron (MLP) neural network, in which input and hidden units are represented by polynomial basis functions (PBFs), is presented. The MLP output is expressed as a linear combination of the PBFs and can therefore be expressed as a polynomial function of its inputs. Thus, the MLP is isomorphic to conventional polynomial discriminant classifiers or Volterra filters. The modeling technique was successfully applied to several trained MLP networks.

Chen, Mu-Song↗
DOE OSTI2020

The Effects of Atmospheric Models on the Estimation of Infrasonic Source Functions at the Source Physics Experiment

We invert infrasound signals for an equivalent seismoacoustic source function using different atmospheric models to produce the necessary Green’s functions. The infrasound signals were produced by a series of underground chemical explosions as part of the Source Physics Experiment (SPE). In a previous study, we inverted the infrasound data using so-called predictive atmospheric models, which were based on historic, regional-scaled, publicly available weather observations interpolated onto a 3D grid. For the work presented here, we invert the same infrasound data, but using atmospheric models based on weather data collected in a time window that includes the approximate time of the explosion experiments, which we term postdictive models. We build two versions of the postdictive models for each SPE event: one that is based solely on the regional scaled observations, and one that is based on both regional scaled observations combined with on-site observations obtained by a weather sonde released at the time of the SPE. We then invert the observed data set three times, once for each atmospheric model type. We find that the estimated seismoacoustic source functions are relatively similar in waveform shape regardless of which atmospheric model that we used to construct the Green’s functions. However, we find that the amplitude of the estimated source functions is systematically dependent on the atmospheric model type: using the predictive atmospheric models to invert the data generally yields estimated source functions that are larger in amplitude than those estimated using the postdictive models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Functional characterization and regulatory modeling of lignocellulose deconstruction in the saprophytic bacterium Cellvibrio japonicus (Final Technical Report)

The goal of this project was to establish a fundamental systems-level model of lignocellulose deconstruction by saprophytic soil bacteria while simultaneously identifying and characterizing novel enzymes that can be used for applied bioenergy technologies. This project was significant because it elevated our mechanistic and regulatory understanding of bacterial plant biomass degradation and led to technologies to enable bottlenecks in biofuel production R&D. Furthermore, the completed work was novel because it integrated in vivo, in vitro, and in silico approaches with bioenergy-relevant substrates. We identified the required enzymes for lignocellulose degradation and mechanisms of regulation through a combination of transcriptomic profiling (RNAseq), enzymatic analysis, the functional characterization of mutants, and modeling of the regulatory networks used to detect and degrade lignocellulose. This project employed the lignocellulose-degrading bacterium Cellvibrio japonicus to dissect the functional properties and underlying regulatory networks saprophytic bacteria use to depolymerize and utilize lignocellulose. There were four Objectives to this project, the specific metrics of which are summarized in this report.

09 BIOMASS FUELS↗
DOE OSTI2020

Screened Range-Separated Hybrid Functional with Polarizable Continuum Model Overcomes Challenges in Describing Triplet Excitations in the Condensed Phase Using TDDFT

Long range-corrected (LRC) or range-separated hybrid (RSH) functionals where the long-range (LR) limit of electronic interactions is set to the exact exchange have been shown to correct the tendency of traditional density functional theory (DFT) to underestimate the frontier orbital gap. Consequently, the use of such functionals in calculating electronic excited states using linear response based time-dependent DFT (TDDFT) has been successful in correcting the tendency for underestimating the energies of charge transfer states by DFT-based calculations. More recently formulations of functionals that attenuate the LR limit to address condensed-phase effects to polarize the electronic density have been reported. In particular screened RSH (SRSH) combined with polarizable continuum model (PCM) was benchmarked successfully in reproducing the fundamental gap and charge transfer state energies of molecular systems in the condensed phase. Here we use SRSH-PCM to address triplet excited states, and show its success in obtaining correspondence of the low-lying triplet states to the singlet–triplet gap in a similar way that the fundamental orbital gap corresponds to electron removal and addition energies. Importantly, the accuracy of the SRSH-PCM in calculating triplet excitations stands on the polarization consistent framework in addressing the scalar dielectric constant and without affecting the optimal tuning by triplet energies. Finally, the prospect of even further improving the SRSH-PCM accuracy in calculating triplet states can be achieved by optimal tuning on the basis of the spin multiplicity gap.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Implementation and evaluation of the unified stomatal optimization approach in the Functionally Assembled Terrestrial Ecosystem Simulator (FATES)

Abstract. Stomata play a central role in regulating the exchange of carbon dioxide and water vapor between ecosystems and the atmosphere. Their function is represented in land surface models (LSMs) by conductance models. The Functionally Assembled Terrestrial Ecosystem Simulator (FATES) is a dynamic vegetation demography model that can simulate both detailed plant demographic and physiological dynamics. To evaluate the effect of stomatal conductance model formulation on forest water and carbon fluxes in FATES, we implemented an optimality-based stomatal conductance model – the Medlyn (MED) model – that simulates the relationship between photosynthesis (A) and stomatal conductance to water vapor (gsw) as an alternative to the FATES default Ball–Woodrow–Berry (BWB) model. To evaluate how the behavior of FATES is affected by stomatal model choice, we conducted a model sensitivity analysis to explore the response of gsw to climate forcing, including atmospheric CO2 concentration, air temperature, radiation, and vapor pressure deficit in the air (VPDa). We found that modeled gsw values varied greatly between the BWB and MED formulations due to the different default stomatal slope parameters (g1). After harmonizing g1 and holding the stomatal intercept parameter (g0) constant for both model formulations, we found that the divergence in modeled gsw was limited to conditions when the VPDa exceeded 1.5 kPa. We then evaluated model simulation results against measurements from a wet evergreen forest in Panama. Results showed that both the MED and BWB model formulations were able to capture the magnitude and diurnal changes of measured gsw and A but underestimated both by about 30 % when the soil was predicted to be very dry. Comparison of modeled soil water content from FATES to a reanalysis product showed that FATES captured soil drying well, but translation of drying soil to modeled physiology reduced the models' ability to match observations. Our study suggests that the parameterization of stomatal conductance models and current model response to drought are the critical areas for improving model simulation of CO2 and water fluxes in tropical forests.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1990

A subgrid-scale model based on the second-order velocity structure function

A series of tests were performed to help extend the use of a subgrid-scale model to compressible and wall-bounded flows. A priori tests were done in the case of the incompressible turbulent channel flow. They showed that a 1-D formulation of the structure-function model is more appropriate, leading to a satisfactory behavior of the model at the walls without requiring any damping function. This model is consistent with the original formulation of Metais & Lesieur (1990). In large-eddy simulations of compressible isotropic turbulence, both models performed well up to an initial rms Mach number of 0.6.

Comte, P.↗
DOE OSTI2026

Radiative strength functions from the energy-localized Brink-Axel hypothesis

Radiative strength functions (RSFs) model the bulk electromagnetic response of highly excited nuclei and are critical inputs for statistical reaction codes. In this paper, we present a definition of the RSF that is consistent with Hauser-Feshbach reaction codes and that can be efficiently computed with the shell model using the Lanczos strength-function (LSF) method. Here, we introduce a variant of the shell-model LSF method that exploits the energy-localized Brink-Axel hypothesis, which makes it possible to compute both electric and magnetic RSFs across all energies relevant to capture reactions. We verify agreement with the conventional definition of RSFs with benchmark calculations of 24 Mg and then present novel results for 56 Fe. For 56 Fe we find that (i) the 𝑀⁢1 RSF shape evolves smoothly with excitation energy, consistent with the energy-localized Brink-Axel hypothesis; (ii) both 𝑀⁢1 and 𝐸⁢1 transitions contribute significantly to the radiative strength below the photoabsorption threshold; and (iii) within the sdpf model space, the strength below 3 MeV observed in Oslo-type experiments cannot be fully reproduced. These results pave the way for a coherent microscopic description of RSFs and further motivate the use of energy-dependent RSFs in modern reaction codes.

Physics - Nuclear physics and radiation physics↗