Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “favorability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Downwind dispersion of CO 2 from a major subsea blowout in shallow offshore waters

Growing interest in offshore geologic carbon sequestration (GCS) motivates risk assessment of large-scale subsea CO 2 well blowouts or pipeline ruptures. For major leaks of CO 2 from wells or pipelines, significant fluxes of CO 2 may occur from the sea surface depending on water depth. In the context of risk assessment of human health and safety, we have used previously simulated coupled well-reservoir and water column model results as a source term for dense gas dispersion of CO 2 above the sea surface. The models are linked together by one-way coupling, that is, output of one model is used as input to the next model. These first-of-their-kind coupled flow results are applicable to assessing the hazard of CO 2 to people at and downwind of the sea surface location of emission. Hazard is quantified by plotting the downwind dispersion length (DDL), which we define in the study as the distances from the emission source to the point at which the emitted CO 2 has been diluted to 5% and 1.5% in air by volume. Here results suggest that large-scale blowouts in shallow water (10 m) may cause hazardous CO 2 plumes extending on the order of several hundred meters downwind. Details of the modeling show DDL has a maximum for windspeed (at an elevation of 10 m) of approximately 5 m/s, with smaller DDL for both weaker and stronger winds. This is explained by the fact that wind favors transport but also causes dispersion; therefore there is a certain wind speed that maximizes DDL.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Assessing the efficiency implications of renewable fuel policy design in the United States

Abstract Obligated parties have chosen to comply with the Renewable Fuel Standard (RFS) by increasing the blending of biomass‐based biodiesel beyond originally targeted levels rather than increasing blending/consumption of ethanol to targeted levels that would have required pricing higher blends of ethanol (E85) at or below an energy‐equivalent level to E10. This paper develops a welfare‐economic framework to analyze the extent to which the nested design and the accompanying cellulosic waiver credit and biodiesel tax credit contributed to a compliance strategy by blenders that favored blending of biodiesel instead of inducing consumption of E85, and its implications for social welfare.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2025

Anion Binding by Macrocyclic Receptors: Computational Landscape of 1:1 and 2:1 Stoichiometries

Macrocyclic receptors play a crucial role in supramolecular chemistry, enabling the selective binding of guest molecules through non-covalent interactions. This study investigates the anion binding properties of three shape-persistent macrocycles, triazolophane, cyanostar, and tricarb, each featuring preorganized cavities with polarized CH hydrogen bond donors. In the 1:1 binding stoichiometries, the macrocycles preferentially bind anions that fit inside their two-dimensional cavities, with this preference being more pronounced in solution. Specifically, the triazolophane favors smaller anions like chloride and bromide, while the larger cavities offered by cyanostar and tricarb macrocycles preferentially bind the larger iodide. For large, polyatomic anions (SCN − , BF$^{−}_{4}$, ClO$^{−}_{4}$, and PF$^{−}_{6}$), the macrocycles self-assemble to form stable 2:1 sandwich complexes, exhibiting stronger binding. This shift in selectivity highlights the versatility of the macrocycles, making them promising candidates for anion sensing and regulation with various complexation stoichiometries.

Che, Minwei [Indiana University, Bloomington, IN (↗
DOE OSTI2025

Molecular Insights Into the Ionic Assembly of Poly-Galacturonic Acid Oligomers - Impact of Charge, Ionic Radius, and Polymer Functionalization

Pectin, a major class of matrix polysaccharides present in plant cell walls (PCW), contains widespread anionic saccharides that cross-link in the presence of cations. It modulates important functions such as cell-cell adhesion and determines the PCW's biomechanical properties. It is known that mono-, di-, and tri-valent cations facilitate cross-linking; however, significant knowledge gaps remain in understanding the structure and mechanism of pectin cross-linking. In this study, replica-exchange molecular dynamics (REMD) simulations were employed to elucidate the role of ionic charge, ionic radii, and functional groups on the cross-linking of homogalacturonan (HG), the most abundant pectin molecule. Our enhanced sampling approach in fully solvated environments suggests more effective cross-linking with higher-valent and smaller ions, and that the "zipper" conformation is more favorable than the prevalent "egg-box" conformation. These findings advance our fundamental understanding of pectin matrix structure in PCWs and provide a solid foundation to probe structure-property relationships in pectic polysaccharides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Utilizing biochars to stabilize mercury in contaminated floodplain sediment: Implications on mercury remediation

Major weather events contribute to the mobility and remobilization of legacy mercury (Hg) contamination and sequestration within sediments. Remediation using biochar as a soil amendment is a useful technique to immobilize and decrease Hg toxicity. This study explored whether biochar application is effective at stabilizing labile mercury (LaHg) from floodplain sediment. Controlled mesocosms simulating contamination events and flooding conditions were conducted. Floodplain sediment, which experiences annual periodic flooding, was collected. Sediment was spiked with inorganic Hg, applied with different types of biochar, and experienced simulated flooding events. Four types of biochar, pure rice husk (RH), pure peanut hull (PH), sulfur-modified rice husk (SMRH), and sulfur-modified peanut hull (SMPH), were applied at 10 and 40 g/kg rates (i.e., RH 10, RH 40; PH 10, PH 40, SMRH 10, SMRH 40, SMPH 10, SMPH 40). Total Hg, methylmercury, and LaHg concentrations were analyzed by coupling with redox potential measurements. Results indicate that SMRH 10, PH 10, PH 40, SMPH 10, and SMPH 40 successfully remediate Hg by stabilizing and reducing LaHg species from floodplain sediment. However, a high Hg methylation potential was observed with unsulfated and sulfated peanut hulls (PH 10, PH 40, SMPH 10, and SMPH 40), as they tend to create a reducing microenvironment that favors sulfate reduction reactions. Additionally, sulfur-modified biochar tends to promote Hg methylation potential at high application rates (i.e., 40 g/kg). We thus recommend using SMRH at a relatively low application rate (SMRH 10) for the remediation of Hg from floodplain sediment.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Observational study of the South American low-level jet during the SALLJEX

The South American Low-Level Jet (SALLJ) east of the Andes is a narrow maximum northerly wind present just above the boundary layer. It is an important component of the tropical-extratropical exchange of heat and moisture in South America and favors deep moist convection in Southeastern South America (SESA). In the present study, the SALLJ characteristics during the 2002-2003 summer season are investigated using upper-air measurements collected during the SALLJ Experiment (SALLJEX). At most stations, the highest wind speed was observed below 3000 m between 06 and 12 UTC, mainly in association with a maximization of the northerly component of the wind while the zonal component reached its minimum. Here, an increase in the maximum wind speed from 10°S to Santa Cruz de la Sierra’s latitude and from there a weakening southward was found throughout the SALLJEX network. Additionally, SALLJEX observations allowed to locate SALLJ core purely from observations in a region just east of the Andes in agreement with previous studies. A new localized kinematic classification was developed and applied in this study to analyze the relationship between the SALLJ intensity and the thermodynamic properties of the lower layers of the atmosphere. Weak, moderate, and strong SALLJ categories were defined with a local threshold of the northerly wind speed maximum at each station. The strongest SALLJs were frequently observed at nighttime, while weaker SALLJs were likely to occur at any time of the day. A stabilization of the nocturnal boundary layer was observed between weak and moderate cases whereas a destabilization between moderate and strong cases were found near the time of the wind speed maximum (06 UTC) at Santiago del Estero and Resistencia stations. A deepening of the convective boundary layer and an increase of its mean temperature between weak and strong category during the previous afternoon to nocturnal SALLJs, reveal a possible contribution to the mechanisms that generate the maximum wind speed.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Evaluating sulfurization as a blue carbon sink in a southern California salt marsh

Blue carbon ecosystems such as seagrass meadows, mangrove forests, and salt marshes are important carbon sinks that can store carbon for millennia. Recently, organic matter sulfurization and pyritization have been proposed as mechanisms of net carbon storage in blue carbon ecosystems. At our study site, organic sulfur that is resistant to acid hydrolysis (protokerogen) is an order of magnitude less abundant than pyrite sulfur, suggesting a dominance of pyritization over sulfurization. The C/N ratios and carbon isotope compositions suggest that nearly half of total organic carbon and ≥ 80% of protokerogen is composed of marsh plant material. Sediment protokerogen appears to be sulfurized based on its low δ 34 S values (− 10‰), abundance of disulfides, and higher S/C ratio (~ 1.0%) relative to potential biogenic sulfur sources. However, the interpretation of protokerogen δ 34 S values is complicated by the wide range in sulfur isotope compositions of marsh plants. Evidence for sulfurization occurs within the shallowest sediments across different vegetation zones, yielding consistent products, while pyritization appears to be more sensitive to alterations in sediment redox conditions. Based on organic sulfur and pyrite content, sulfurization may be a more spatially consistent process than pyritization, with implications for carbon storage. The relative abundance of pyrite and protokerogen organic sulfur indicates that pyritization is favored at our study site, but this is likely to vary across the spectrum of blue carbon ecosystems.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Selectively Depolymerizable Polyurethanes from Unsaturated Polyols Cleavable by Olefin Metathesis

This communication describes a novel series of linear and crosslinked polyurethanes (PUs) and their selective depolymerization under mild conditions. Two unique polyols are synthesized bearing unsaturated units in a configuration designed to favor ring-closing metathesis (RCM) to five- and six-membered cycloalkenes. These polyols are co-polymerized with toluene diisocyanate to generate linear PUs and trifunctional hexamethylene- and diphenylmethane-based isocyanates to generate crosslinked PUs. The polyol design is such that the RCM reaction cleaves the backbone of the polymer chain. Upon exposure to dilute solutions of Grubbs’ catalyst under ambient conditions, the PUs are rapidly depolymerized to low molecular weight, soluble products bearing vinyl and cycloalkene functionalities. These functionalities enable further re-polymerization by traditional strategies for polymerization of double bonds. We anticipate that this general approach can be expanded to develop a range of chemically recyclable condensation polymers that are readily depolymerized by orthogonal metathesis chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Amphiphilic Peptoid–Directed Assembly of Oligoanilines into Highly Crystalline Conducting Nanotubes

It is reported herein the synthesis of a novel amphiphilic diblock peptoid bearing a terminal conjugated oligoaniline and its self-assembly into small-diameter (D ≈ 35 nm) crystalline nanotubes with high aspect ratios (>30). It is shown that both tetraaniline (TANI)-peptoid and bianiline (BANI)-peptoid triblock molecules self-assemble in solution to form rugged highly crystalline nanotubes that are very stable to protonic acid doping and de-doping processes. The similarity of the crystalline tubular structure of the nanotube assemblies revealed by electron microscopy imaging, and X-ray diffraction analysis of the nanotube assemblies of TANI-functionalized peptoids and nonfunctionalized peptoids showed that the peptoid is an efficient ordered structure directing motif for conjugated oligomers. Films of doped TANI-peptoid nanotubes has a dc conductivity of ca. 95 mS cm –1 , while the thin films of doped un-assembled TANI-peptoids show a factor of 5.6 lower conductivity, demonstrating impact of the favorable crystalline ordering of the assemblies on electrical transport. Furthermore, these results demonstrate that peptoid-directed supramolecular assembly of tethered π-conjugated oligo(aniline) exemplify a novel general strategy for creating rugged ordered and complex nanostructures that have useful electronic and optoelectronic properties.

conducting nanotubes↗
DOE OSTI2021

Kinetic Monte Carlo Tool for Kinetic Modeling of Linear Step-Growth Polymerization: Insight into Recycling of Polyurethanes

A kinetic Monte Carlo model of polyurethane polymerization which explicitly tracks the polymer sequences is developed and shared. Here this model is benchmarked against theoretical and experimental polyurethane data and used to investigate the effect on oligomer distributions of unequal reactivity of the first and second isocyanate to react. The reverse reactions using thermodynamic consistency are then added to the framework, and analogous to the addition polymerization concept of ceiling temperature, equilibrium chain length distributions at various temperatures are calculated. For a mixture of three monomers AA, BB, and CC, where BB and CC do not react with one another, are present in stoichiometric proportions, and have different enthalpies of reaction with AA, an odd-even effect emerges. Odd length chains are more likely than even length chains for temperatures at which BB and CC have significantly different equilibrium conversions. The concept of ceiling temperature that is typically cited for addition polymers is extended here to provide a measure of conditions under which depolymerization for recycling is favored.

condensation polymerization↗
DOE OSTI2021

27 Al NMR diffusometry of Al 13 Keggin nanoclusters

Although nanometer-sized aluminum hydroxide clusters (i.e., ϵ-Al 13 , [Al 13 O 4 (OH) 24 (H 2 O) 12 ] 7+ ) command a central role in aluminum ion speciation and transformations between minerals, measurement of their translational diffusion is often limited to indirect methods. Here, in this work, 27 Al pulsed field gradient stimulated echo nuclear magnetic resonance (PFGSTE NMR) spectroscopy has been applied to the AlO 4 core of the ϵ-Al 13 cluster with complementary theoretical simulations of the diffusion coefficient and corresponding hydrodynamic radii from a boundary element-based calculation. The tetrahedral AlO 4 center of the ϵ-Al 13 cluster is symmetric and exhibits only weak quadrupolar coupling, which results in favorable T 1 and T 2 27 Al NMR relaxation coefficients for 27 Al PFGSTE NMR studies. Stokes–Einstein relationship was used to relate the 27 Al diffusion coefficient of the ϵ-Al 13 cluster to the hydrodynamic radius for comparison with theoretical simulations, dynamic light scattering from literature, and previously published 1 H PFGSTE NMR studies of chelated Keggin clusters. This first-of-its-kind observation proves that 27 Al PFGSTE NMR diffusometry can probe symmetric Al environments in polynuclear clusters of greater molecular weight than previously considered.

27Al↗
DOE OSTI2025

Optimal Polynomial Smoothers and One‐Sided V‐Cycles for Poisson Problems

The solution to the Poisson equation arising from the spectral element discretization of the incompressible Navier‐Stokes equations needs robust preconditioning strategies. One such strategy is multigrid. To realize the potential of multigrid methods, effective smoothing strategies are needed. Chebyshev polynomial smoothers, in conjunction with pointwise Jacobi or additive Schwarz methods (ASMs), prove to be an effective smoother. Other polynomial smoothers, however, may provide superior convergence to the multigrid preconditioner. The authors compare the standard Chebyshev polynomial smoothers to both the novel fourth‐kind Chebyshev polynomial smoothers proposed by Lottes as well as smoothers based on the polynomial of best uniform approximation to as proposed by Kraus, Vassilevski, and Zikatanov. At the cost of symmetry, further improvements may be made. For example, a order polynomial smoother on both sides of the V‐cycle may be substituted with an order polynomial smoother on one side at no additional cost. The choice of omitting the postsmoother in favor of higher‐order polynomial presmoothing is advantageous in cases where the multigrid approximation property constant is large. The authors consider a 2D model problem based on finite differences to motivate the choice of polynomial smoother, order, and whether to apply postsmoothing for the target application of high‐order ‐geometric multigrid methods for GPU architectures. Results from both domains demonstrate the substantial improvement of these approaches over the standard Chebyshev polynomial smoother with a symmetric V‐cycle.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Nonlinear multiobjective and dynamic real-time predictive optimization for optimal operation of baseload power plants under variable renewable energy

Considering the increase of disruptive variable renewable energy penetration into the power grid, this article focuses on the investigation of a multiobjective and dynamic real-time optimization framework to address the cycling of large-scale power plants under renewable penetration. In this framework, a parallelized particle swarm optimization step is first performed to generate feasible initial points. Then, a multiobjective and dynamic real-time optimization formulation generates optimal trajectories. Further, the benefit of predictive capability is investigated for the dynamic component, which introduces the novel nonlinear multiobjective and dynamic real-time predictive optimization approach. Two multiobjective formulations to obtain Pareto front optimal in real time are explored: the modified Tchebycheff-based weighted metric and ϵ-constraint methods. Economic and environmental objectives are considered in this study. A novel topical discussion on the intersection of dynamic real-time optimization with model predictive control is also presented. The developed framework is successfully applied to a baseload coal-fired power plant with postcombustion CO 2 capture. Results indicate that the approach can be deployed for a large-scale system if automatic differentiation, model reduction, and parallelization are adopted to improve computational tractability, with computational improvement up to 120-folds after performing these steps. Finally, market and carbon policies showed an impact on the optimal compromise between the objectives with an additional 63 ton of CO 2 captured under favorable market conditions.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2020

Molecular subtyping reveals immune alterations in IDH wild‐type lower‐grade diffuse glioma

Abstract Isocitrate dehydrogenase ( IDH ) wild‐type diffuse lower‐grade glioma (LGG) is usually associated with poor outcome, but there have been disputes over its clinical outcome and classification. We present here a robust gene expression‐based molecular classification of IDH wild‐type diffuse LGG into two subtypes with distinct biological and clinical features. A discovery cohort of 49 IDH wild‐type diffuse LGGs from the Chinese Glioma Genome Atlas (CGGA) was subjected to clustering and function analysis. Seventy‐three tumors from The Cancer Genome Atlas (TCGA) were used to validate our findings. Consensus clustering of transcriptional data uncovered concordant classification of two robust and prognostically significant subtypes of IDH wild‐type LGG. Subtype 1, associated with poorer outcomes, was characterized by significantly higher immune and cytolytic scores, M2 macrophages, and up‐regulation of immune exhaustion markers, while Subtype 2, which had elevated lymphocytes and plasma cells, showed relatively favorable survival. Somatic alteration analysis revealed that Subtype 1 showed more frequently deleted regions, such as the locus of CDKN2A / CDKN2B , DMRTA1 , C9orf53 , and MTAP . Furthermore, we developed and validated a five‐gene signature for better application of this acquired stratification. Our data demonstrate the biological and prognostic heterogeneity within IDH wild‐type diffuse LGGs and deepen our molecular understandi‐g of this tumor entity. © 2020 Pathological Society of Great Britain and Ireland. Published by John Wiley & Sons, Ltd.

Wu, Fan↗
DOE OSTI2021

Hybrid of multi‐dimensional fillers for thermally enhanced polyamide 12 composites fabricated by selective laser sintering

Abstract Selective laser sintering (SLS) is an additive manufacturing technology that can provide a novel strategy to manufacture complex polymer‐based composites with tailored properties. In this study, polyamide 12 (PA12) composite powders based on Al 2 O 3 , boron nitride (BN), and carbon nanotubes (CNTs) were prepared via a two‐step mixing approach. Morphology characterization techniques indicated that the fillers were uniformly dispersed in the PA12 matrix as expected. Under the optimum 3D‐printing parameters, the fabrication of SLS parts with high filler loading could be obtained. With 40 wt% Al 2 O 3 , 8 wt% BN, and 2 wt% CNT hybrid fillers, the thermal conductivity of PA12 composites could reach 1.09 W/mK. It could be attributed to the synergistic effect of multi‐dimensional fillers to form dense and continuous thermal conduction paths. The factors influencing the performance of PA12 composites such as melting and crystallization behaviors, dielectric properties, and mechanical properties were also discussed. The results show that these composites have favorable dielectric and mechanical properties. Overall, the PA12 composites fabricated by SLS technology in this study exhibit excellent thermal management ability.

Yuan, Yue↗
DOE OSTI2021

Role of tunable polymer flexibility in controlling wetting behavior and thermal properties of poly(1,3-cyclohexadiene)-silica nanocomposites

We present how altering the chain flexibility affects the nanoscale organization of polymer-grafted nanoparticles (PGNPs) and its ultimate impact on macroscale thermal properties. To isolate the role of chain flexibility on wetting behavior in athermal polymer nanocomposites (PNC), the graft and matrix chemistry is kept identical by utilizing 1,3-cyclohexadiene-based polymer materials. Increasing the rigidity and molecular weight of both the graft and matrix is found to favor mixing of poly(1,3-cyclohexadiene) PCHD-grafted silica NPs with the matrix, supported by a concomitant increase in glass transition temperatures of the PNCs. Further, the associated entropic factors that drive wetting behavior and dispersion of PGNPs are discussed, emphasizing the dominant role-played by chain flexibility. Alterations in graft flexibility had the strongest impact on dispersion and Tg values of the PNC, while molecular weight (MW) plays a secondary role. This investigation is a unique demonstration of how chain flexibility alteration in athermal semiflexible systems can be used to alter NP organization by altering filler-matrix wettability which also impacts thermal properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Manning condensation in ion exchange membranes: A review on ion partitioning and diffusion models

Here, the rational design of ion exchange membranes (IEMs) is becoming more pertinent as their usage becomes broader and as their staple applications (i.e., electrodialysis, flow batteries, and fuel cells) improve in commercial viability. Such efforts would be catalyzed by an improved fundamental understanding of ion transport in IEMs. This review discusses recent progress in modeling ion partitioning and diffusion in IEMs in an effort to relate IEM performance metrics to fundamental membrane properties over which researchers and membrane manufacturers possess direct and sometimes precise control. Central focus is given to the Donnan-Manning model for ion partitioning and the Manning-Meares model for ion diffusion in IEMs. These two frameworks, which are derived from Manning's counter-ion condensation theory for polyelectrolyte solutions, have been widely used within the IEM literature since their recent introduction. To explore this topic, the mathematical derivation of both models is revisited, followed by a survey of experimental and computational discussions of counter-ion condensation in IEMs. Alternative models which fulfill similar roles in predicting IEM transport properties are compared. This review concludes by highlighting the uniquely favorable positions of the Donnan-Manning and Manning-Meares models and discussing their prospects as leading predictors of IEM partitioning and diffusive properties.

25 ENERGY STORAGE↗