Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “factorization methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Limits on coronal reflection using high-frequency solar oscillations

Acoustic waves in the Sun with frequencies above about 5.3 mHz can propagate in the chromosphere. We examine imaged solar intensity data for evidence of reflection of these waves in the upper chromosphere, where the temperature increases by a large factor over a short distance. Our method is to compare the observed and theoretically derived frequency spacings between peaks in the power spectrum. We find that our theoretical frequencies provide the best fit to the data when the reflection in the upper atmosphere is eliminated. In particular, the model of Kumar (1993b), which includes the source depth, and radiative damping, in the calculation of power spectra but ignores chromospheric reflection, gives peak frequencies that are in good agreement with the observations. For acoustic waves of frequency greater than 6 mHz we put an upper limit to the reflectivity of chromosphere and corona, using our method, of about 10%. At a given spherical harmonic degree, the frequency spacing between peaks in the data generally decreases with increasing frequency, because the lower turning point of the waves is moving inward. However, between 5 and 5.5 mHz the frequency spacing increases slightly. This feature is probably associated with the acoustic cutoff frequency in the solar atmosphere, i.e., it indicates a transition from trapped waves to propagating waves. We are able to reproduce the observed behavior by a crude modeling of the solar atmosphere. Further study of these peaks should provide an independent way of exploring the mean structure of the solar atmosphere, particularly around the temperature minimum region.

Kumar, P.↗
NASA NTRS1995

Analysis of tipping-curve measurements performed at the DSS-13 beam-waveguide antenna at 32.0 and 8.45 GigaHertz

This article reports on the analysis of the Ka-band Antenna Performance Experiment tipping-curve data acquired at the DSS-13 research and development beam-waveguide (BWG) antenna. By measuring the operating system temperatures as the antenna is moved form zenith to low-elevation angles and fitting a model to the data, one can obtain information on how well the overall temperature model behaves at zenith and approximate the contribution due to the atmosphere. The atmospheric contribution estimated from the data can be expressed in the form of (1) atmospheric noise temperatures that can provide weather statistic information and be compared against those estimated from other methods and (2) the atmospheric loss factor used to refer efficiency measurements to zero atmosphere. This article reports on an analysis performed on a set of 68 8.4-GHz and 67 32-GHz tipping-curve data sets acquired between December 1993 and May 1995 and compares the results with those inferred from a surface model using input meteorological data and from water vapor radiometer (WVR) data. The general results are that, for a selected subset of tip curves, (1) the BWG tipping-curve atmospheric temperatures are in good agreement with those determined from WVR data (the average difference is 0.06 +/- 0.64 K at 32 GHz) and (2) the surface model average values are biased 3.6 K below those of the BWG and WVR at 32 GHz.

Morabito, D. D.↗
NASA NTRS1994

Convergence acceleration of an aeroelastic Navier-Stokes solver

New capabilities have been added to a Navier-Stokes solver to perform steady-state simulations more efficiently. The flow solver for solving the Navier-Stokes equations is completely rewritten with a combination of the LU-SGS (Lower-Upper factored Symmetric Gauss-Seidel) implicit method and the modified HLLE (Harten-Lax-van Leer-Einfeldt) upwind scheme. A pseudo-time marching method is used for the directly coupled structural equations to improve overall convergence rates for static aeroelastic analysis. Results are demonstrated for transonic flows over rigid and flexible wings.

Obayashi, S.↗
NASA NTRS1995

Convergence Acceleration of a Navier-Stokes Solver for Efficient Static Aeroelastic Computations

New capabilities have been developed for a Navier-Stokes solver to perform steady-state simulations more efficiently. The flow solver for solving the Navier-Stokes equations is based on a combination of the lower-upper factored symmetric Gauss-Seidel implicit method and the modified Harten-Lax-van Leer-Einfeldt upwind scheme. A numerically stable and efficient pseudo-time-marching method is also developed for computing steady flows over flexible wings. Results are demonstrated for transonic flows over rigid and flexible wings.

Obayashi, Shigeru↗
NASA NTRS1996

SEADYN Analysis of a Tow Line for a High Altitude Towed Glider

The concept of using a system, consisting of a tow aircraft, glider and tow line, which would enable subsonic flight at altitudes above 24 km (78 kft) has previously been investigated. The preliminary results from these studies seem encouraging. Under certain conditions these studies indicate the concept is feasible. However, the previous studies did not accurately take into account the forces acting on the tow line. Therefore in order to investigate the concept further a more detailed analysis was needed. The code that was selected was the SEADYN cable dynamics computer program which was developed at the Naval Facilities Engineering Service Center. The program is a finite element based structural analysis code that was developed over a period of 10 years. The results have been validated by the Navy in both laboratory and at actual sea conditions. This code was used to simulate arbitrarily-configured cable structures subjected to excitations encountered in real-world operations. The Navy's interest was mainly for modeling underwater tow lines, however the code is also usable for tow lines in air when the change in fluid properties is taken into account. For underwater applications the fluid properties are basically constant over the length of the tow line. For the tow aircraft/glider application the change in fluid properties is considerable along the length of the tow line. Therefore the code had to be modified in order to take into account the variation in atmospheric properties that would be encountered in this application. This modification consisted of adding a variable density to the fluid based on the altitude of the node being calculated. This change in the way the code handled the fluid density had no effect on the method of calculation or any other factor related to the codes validation.

Colozza, Anthony J.↗
NASA NTRS2001

Crack Turning Mechanics of Composite Wing Skin Panels

The safety of future composite wing skin integral stiffener panels requires a full understanding of failure mechanisms of these damage tolerance critical structures under both in-plane and bending loads. Of primary interest is to derive mathematical models using fracture mechanics in anisotropic cracked plate structures, to assess the crack turning mechanisms, and thereby to enhance the residual strength in the integral stiffener composite structures. The use of fracture mechanics to assess the failure behavior in a cracked structure requires the identification of critical fracture parameters which govern the severity of stress and deformation field ahead of the flaw, and which can be evaluated using information obtained from the flaw tip. In the three-year grant, the crack-tip fields under plane deformation, crack-tip fields for anisotropic plates and anisotropic shells have been obtained. In addition, methods for determining the stress intensity factors, energy release rate, and the T-stresses have been proposed and verified. The research accomplishments can be summarized as follows: (1) Under plane deformation in anisotropic solids, the asymptotic crack-tip fields have been obtained using Stroh formalism; (2) The T-stress and the coefficient of the second term for sigma(sub y), g(sub 32), have been obtained using path-independent integral, the J-integral and Betti's reciprocal theorem together with auxiliary fields; (3) With experimental data performed by NASA, analyses indicated that the mode-I critical stress intensity factor K(sub Q) provides a satisfactory characterization of fracture initiation for a given laminate thickness, provided the failure is fiber-dominated and crack extends in a self-similar manner; (4) The high constraint specimens, especially for CT specimens, due to large T-stress and large magnitude of negative g(sub 32) term may be expected to inhibit the crack extension in the same plane and promote crack turning; (5) Crack turning out of crack plane in generally anisotropic solids under plane deformation has been studied; (6) The role of T-stress and the higher-order term of sigma(sub y) on the crack turning and stability of the kinked crack has been quantified; (7) Asymptotic crack-tip fields including the effect of transverse shear deformation (Reissner plate theory) in an anisotropic plate under bending, twisting moments, and transverse shear loads has been presented; (8) The expression of the path-independent J-integral in terms of the generalized stress and strain has been derived; (9) Asymptotic crack-tip fields including the effect of transverse shear deformation (Reissner shallow shell theory) in a general anisotropic shell has been developed; (10) The Stroh formalism was used to characterize the crack tip fields in shells up to the second term and the energy release rate was expressed in a very compact form.

Yuan, F. G.↗
NASA NTRS2005

Aspects of Numerical Simulation of Circulation Control Airfoils

The mass-averaged compressible Navier-Stokes equations are solved for circulation control airfoils. Numerical solutions are computed with a multigrid method that uses an implicit approximate factorization smoother. The effects of flow conditions (e.g., free-stream Mach number, angle of attack, momentum coefficient) and mesh on the prediction of circulation control airfoil flows are considered. In addition, the impact of turbulence modeling, including curvature effects and modifications to reduce eddy viscosity levels in the wall jet (i.e., Coanda flow), is discussed. Computed pressure distributions are compared with available experimental data.

Swanson, R. C.↗
NASA NTRS2003

An Independent Human Factors Analysis and Evaluation of the Emergency Medical Protocol Checklist for the International Space Station

Emergency medical capabilities aboard the ISS include a Crew Medical Officer (CMO) (not necessarily a physician), and back-up, resuscitation equipment, and a medical checklist. It is essential that CMOs have reliable, usable and informative medical protocols that can be carried out independently in flight. The study evaluates the existing ISS Medical Checklist layout against a checklist updated to reflect a human factors approach to structure and organization. Method: The ISS Medical checklist was divided into non-emergency and emergency sections, and re-organized based on alphabetical and a body systems approach. A desk-top evaluation examined the ability of subjects to navigate to specific medical problems identified as representative of likely non-emergency events. A second evaluation aims to focus on the emergency section of the Medical Checklist, based on the preliminary findings of the first. The final evaluation will use Astronaut CMOs as subjects comparing the original checklist against the updated layout in the task of caring for a "downed crewmember" using a Human Patient Simulator [Medical Education Technologies, Inc.]. Results: Initial results have demonstrated a clear improvement of the re-organized sections to determine the solution to the medical problems. There was no distinct advantage for either alternative, although subjects stated having a preference for the body systems approach. In the second evaluation, subjects will be asked to identify emergency medical conditions, with measures including correct diagnosis, time to completion and solution strategy. The third evaluation will compare the original and fully updated checklists in clinical situations. Conclusions: Initial findings indicate that the ISS Medical Checklist will benefit from a reorganization. The present structure of the checklist has evolved over recent years without systematic testing of crewmember ability to diagnose medical problems. The improvements are expected to enable ISS Crewmembers to more speedily and accurately respond to medical situations on the ISS.

Marshburn, Thomas↗
NASA NTRS2011

Lessons Learned from CFD Validation Study of Protuberance Heating

The objectives of this presentation are: (1) Share lessons learned from a recent exercise in CFD validation of protuberance heating (2) Impact of experimental data reduction assumptions and techniques on validation activity (3) Advanced data reduction techniques may provide useful data from non-typical test methods (4) Significance of the recovery factor for high-speed flows (5) Show typical results of the Lag turbulence model on protuberances (6) Introduce and inform the listener of a protuberance heating dataset which will soon be available for comparison

Oliver, Brandon↗
NASA NTRS2012

Leveraging Data Intensive Computing to Support Automated Event Services

A large portion of Earth Science investigations is phenomenon- or event-based, such as the studies of Rossby waves, mesoscale convective systems, and tropical cyclones. However, except for a few high-impact phenomena, e.g. tropical cyclones, comprehensive records are absent for the occurrences or events of these phenomena. Phenomenon-based studies therefore often focus on a few prominent cases while the lesser ones are overlooked. Without an automated means to gather the events, comprehensive investigation of a phenomenon is at least time-consuming if not impossible. An Earth Science event (ES event) is defined here as an episode of an Earth Science phenomenon. A cumulus cloud, a thunderstorm shower, a rogue wave, a tornado, an earthquake, a tsunami, a hurricane, or an EI Nino, is each an episode of a named ES phenomenon," and, from the small and insignificant to the large and potent, all are examples of ES events. An ES event has a finite duration and an associated geolocation as a function of time; its therefore an entity in four-dimensional . (4D) spatiotemporal space. The interests of Earth scientists typically rivet on Earth Science phenomena with potential to cause massive economic disruption or loss of life, but broader scientific curiosity also drives the study of phenomena that pose no immediate danger. We generally gain understanding of a given phenomenon by observing and studying individual events - usually beginning by identifying the occurrences of these events. Once representative events are identified or found, we must locate associated observed or simulated data prior to commencing analysis and concerted studies of the phenomenon. Knowledge concerning the phenomenon can accumulate only after analysis has started. However, except for a few high-impact phenomena. such as tropical cyclones and tornadoes, finding events and locating associated data currently may take a prohibitive amount of time and effort on the part of an individual investigator. And even for these high-impact phenomena, the availability of comprehensive records is still only a recent development. A major reason for the lack of comprehensive ,records for the majority of the ES phenomena is the perception that they do not pose immediate and/or severe threat to life and property and are thus not consistently tracked. monitored, and catalogued. Many phenomena even lack commonly accepted criteria for definitions. However. the lack of comprehensive records is also due to the increasingly prohibitive volume of observations and model data that must be examined. NASA Earth Observing System Data Information System (EOSDIS) alone archives several petabytes (PB) of satellite remote sensing data and steadily increases. All of these factors contribute to the difficulty of methodically identifying events corresponding to a given phenomenon and significantly impede systematic investigations. In the following we present a couple motivating scenarios, demonstrating the issues faced by Earth scientists studying ES phenomena.

Clune, Thomas L.↗
NASA NTRS2015

Radiation Environment Model of Protons and Heavier Ions at Jupiter

We performed an in depth study of the methods used to review the geometric factors (GF) and sensitivity to charge particles of the Energetic Particle Detector instrument on board the Galileo Spacecraft. Monte Carlo simulations were performed to understand the interactions of electrons and ions (i. e., protons and alphas) with the sensitive regions of the instrument. The DC0 and B0 channels were studied with the intention of using them to update the jovian proton radiation model. The results proved that the B0 is a clean proton chanel without any concerns for contamination by heavier ions and electrons. In contrast, DC0 was found to be contaminated by electrons. Furthermore, we also found out that the B2 channel is a clean alpha particle channel (in other words, no contamination by electrons and/or protons).

Jupiter Radiation Environment↗
NASA NTRSDate not supplied

Countermeasures for Mitigation of Sensorimotor Decrements Following Head-Down Bed Rest

BACKGROUND Decrements in functional performance of tasks requiring postural and locomotor control remain common among crewmembers returning to Earth after6months on the International Space Station (ISS). These impairments will presumably be exacerbated after longer exploration-class missions with fewer exercise hardware options. Our recent studies suggest that an in-flight proprioceptive countermeasure may keep the proprioceptive system tuned to respond to upright balance challenges in a gravitational environment. Before testing a proprioceptive countermeasure in-flight, we must conduct an initial proof-of-concept study to determine its potential efficacy in a controlled unloading analog setting. OBJECTIVES We will determine if proprioceptive training during 60 days of 6° head down bed rest (HDBR) mitigates declines in functional task performance. We consider it critical to characterize the interaction between proprioceptive training and exercise. Thus, we will compare 3groupsof subjects(N=12 each): a proprioceptive training group, an exercise plus proprioceptive training group, and a control group(i.e. no training or exercise).The primary outcome measure will be the well-established and operationally relevant seat egress and walk test (also referred to as the functional mobility test)performed before and after HDBR. Other functional tests will also represent high priority exploration mission tasks that require high demand for dynamic control of postural stability. Additional measures will be used to identify the key physiological factors contributing to countermeasure benefits. COUNTERMEASURE METHODS We will use a ground version of our countermeasure to test the efficacy of proprioceptive training while maintaining HDBR constraints. Subjects will remain in the horizontal supine position on a sled that moves freely on air-bearings, similar to a puck on an air hockey table. Subjects will be loaded axially up to one full body weight via lateral cable pulleys towards their feet on an instrumented tilt board using a harness and weights system. Visual feedback of board tilt will be used to guide subjects while they make active tilts. Exercise and proprioceptive training prescriptions will represent those expected to be implemented during exploration spaceflight missions(e.g.20-minute proprioceptive training sessions3 times per week). RELEVANCE The deliverable from this project will be a proof-of-concept countermeasure design that has been fully assessed for efficacy in a spaceflight analog. The findings and lessons learned from this study will be translated for validation of this countermeasure on the ISS. An effective countermeasure will be added to the suite of operationally implemented in-flight sensorimotor countermeasures.

T R Macaulay↗
NASA NTRSDate not supplied

Artemis Internal Science Team Update: Data and Software Development

Artemis will reestablish human presence on the Moon and lead to a new era of scientific discovery and exploration. Led by the National Aeronautics and Space Administration (NASA), Artemis includes a collaboration of space agencies and companies from around the world. In support of Artemis, a cross-disciplinary effort of science, engineering, mission operations, and human factors personnel is developing the best methods, facilities, and field locations to test hardware, train astronauts, and evaluate modern concepts of operations. This abstract, as part of the Artemis Internal Science Team (AIST), provides an update to the science-relevant data and software developments and integrated testing efforts that have occurred in 2022.

M. J. Miller↗
NASA NTRS2010

Phase I for the Use of TOPEX-Poseidon and Jason-1 Radar Altimetry to Monitor Coastal Wetland Inundation and Sea Level Rise in Coastal Louisiana

The objective of the first phase of this project was to determine the feasibility of applying satellite altimetry data to monitor sea level rise and inundation within coastal Louisiana. Global sea level is rising, and coastal Louisiana is subsiding. Therefore, there is a need to monitor these trends over time for coastal restoration and hazard mitigation efforts. TOPEX/POSEIDON and Jason-data are used for global sea level estimates and have also been demonstrated successfully in water level studies of lakes, river basins, and floodplains throughout the world. To employ TOPEX/POSEIDON and Jason-1 data in coastal regions, the numerous steps involved in processing the data over non-open ocean areas must be assessed. This project outlined the appropriate methodology for processing non-open ocean data, including retracking and atmospheric corrections. It also inventoried the many factors in coastal land loss including subsidence, sea level rise, coastal geomorphology, and salinity levels, among others, through a review of remote sensing and field methods. In addition, the project analyzed the socioeconomic factors within the Coastal Zone as compared to the rest of Louisiana. While sensor data uncertainty must be addressed, it was determined that it is feasible to apply radar altimetry data from TOPEX/POSEIDON and Jason 1 to see trends in change within Coastal Louisiana since

Brozen, Madeline↗
NASA NTRS1998

Computation of Anisotropic Bi-Material Interfacial Fracture Parameters and Delamination Creteria

This report documents the recent developments in methodologies for the evaluation of the integrity and durability of composite structures, including i) the establishment of a stress-intensity-factor based fracture criterion for bimaterial interfacial cracks in anisotropic materials (see Sec. 2); ii) the development of a virtual crack closure integral method for the evaluation of the mixed-mode stress intensity factors for a bimaterial interfacial crack (see Sec. 3). Analytical and numerical results show that the proposed fracture criterion is a better fracture criterion than the total energy release rate criterion in the characterization of the bimaterial interfacial cracks. The proposed virtual crack closure integral method is an efficient and accurate numerical method for the evaluation of mixed-mode stress intensity factors.

Chow, W-T.↗
NASA NTRS1961

A Method for the Calculation of Lattice Energies of Complex Crystals with Application to the Oxides of Molybdenum

A theoretical study has been made of molybdenum dioxide and molybdenum trioxide in order to extend the knowledge of factors Involved in the oxidation of molybdenum. New methods were developed for calculating the lattice energies based on electrostatic valence theory, and the coulombic, polarization, Van der Waals, and repulsion energie's were calculated. The crystal structure was examined and structure details were correlated with lattice energy.

Chaney, William S.↗
NASA NTRS2018

Enhancements to the Open Access Spectral Band Adjustment Factor Online Calculation Tool for Visible Channels

With close to 40 years of satellite observations, from which, cloud, land-use, and aerosol parameters can be measured, inter-consistent calibrations are needed to normalize retrievals across satellite records. Various visible-sensor inter-calibration techniques have been developed that utilize radiometrically stable Earth targets, e.g., deep convective clouds and desert/polar ice pseudo-invariant calibration sites. Other equally effective, direct techniques for intercalibration between satellite imagers are simultaneous nadir overpass comparisons and ray-matched radiance pairs. Combining independent calibration results from such varied techniques yields robust calibration coefficients, and is a form of self-validation. One potential source of significant error when cross-calibrating satellite sensors, however, are the often small but substantial spectral discrepancies between comparable bands, which must be accounted for. As such, visible calibration methods rely on a Spectral Band Adjustment Factor (SBAF) to account for the spectral-response function- induced radiance differences between analogous imagers. The SBAF is unique to each calibration method as it is a function of the Earth-reflected spectra. In recent years, NASA Langley pioneered the use of SCIAMACHY-, GOME-2-, and Hyperion-retrieved Earth spectra to compute SBAFs. By carefully selecting hyperspectral footprints that best represent the conditions inherent to an inter-calibration technique, the uncertainty in the SBAF is greatly reduced. NASA Langley initially provided the Global Space-based Inter-calibration System processing and research centers with online SBAF tools, with which users select conditions to best match their calibration criteria. This article highlights expanded SBAF tool capabilities for visible wavelengths, with emphasis on the use of the spectral range filtering for the purpose of separating scene conditions for the channel that the SBAF is needed based on the reflectance values of other bands. In other words, spectral filtering will enable better scene-type selection for bands where scene determination is difficult without information from other channels, which should prove valuable to users in the calibration community.

Scarino, Benjamin↗
NASA NTRS1993

Previous experience in manned space flight: A survey of human factors lessons learned

Previous experience in manned space flight programs can be used to compile a data base of human factors lessons learned for the purpose of developing aids in the future design of inhabited spacecraft. The objectives are to gather information available from relevant sources, to develop a taxonomy of human factors data, and to produce a data base that can be used in the future for those people involved in the design of manned spacecraft operations. A study is currently underway at the Johnson Space Center with the objective of compiling, classifying, and summarizing relevant human factors data bearing on the lessons learned from previous manned space flights. The research reported defines sources of data, methods for collection, and proposes a classification for human factors data that may be a model for other human factors disciplines.

Chandlee, George O.↗