Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “examination”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Examination of T-111 clad uranium nitride fuel pins irradiated up to 13,000 hours at a clad temperature of 990 C

The examination of 27 fuel pins irradiated for up to 13,000 hours at 990 C is described. The fuel pin clad was a tantalum alloy with uranium nitride as the nuclear fuel. Two nominal fuel pin diameters were tested with a maximum burnup of 2.34 atom percent. Twenty-two fuel pins were tested for fission gas leaks; thirteen pins leaked. Clad ductility tests indicated clad embrittlement. The embrittlement is attributed to hydrogen from an n,p reaction in the fuel. Fuel swelling was burnup dependent, and the amount of fission gas release was low, generally less than 0.5 percent. No incompatibilities between fuel, liner, and clad were in evidence.

Slaby, J. G.↗
NASA NTRS1973

Further examination of pilot instrument scanning data and development of a new link value estimator

Pilot instrument scanning data collected during simulated transport instrument landing approaches is examined. Deterministic features of random pilot instrument scanning behavior are confirmed to be: transitions in point of eye fixation which originate and terminate on the same instrument are rare; and transitions in point of eye fixation which originate on one secondary instrument and terminate on another secondary instrument are rare. Link value estimators are developed using statistics and these experimental facts. The result has a special significance when there is but a single primary instrument, a flight director. The result is used to simplify the iterative computational procedure of STI's display theory to a non-iterative procedure for the flight director case.

Hofmann, L. G.↗
NASA NTRS1974

Examination of the influence of coatings on thin superalloy sections. Volume 1: Description and analysis

The effects of an aluminide coating and of section thickness were investigated on two cast nickel-base superalloys. Cast section thickness ranged from 0.038 cm to 0.15 cm. Simulated engine exposures in a jet fuel burner rig with cyclic air cooling were studied. The effects of surface machining before coating and re-machining and re-coating after exposures were examined. The properties evaluated included tensile strength, stress rupture, high-cycle mechanical fatigue, and thermal fatigue. A metallurgical analysis was made of the microstructures of the coated and uncoated alloy.

Kaufman, M.↗
NASA NTRS1975

Results of eye examination

Five pocket mice (Perognathus longimembris) were flown on Apollo XVII, and four survived. All the eyes, except one eye from the dead flight mouse, were examined histologically. In the four surviving mice, a total of five cosmic-ray particles which had registered in the subscalp particle detectors had trajectories that intersected the eyes. Four of them (Z = 6.9 for three of the particles and Z greater than or equal to 10 for the fourth) most likely went through the head before reaching the particle detector, while the thindown direction of the fifth (Z greater than or equal to 10) was not determinable. The retinas of the flight animals were found free from histological alterations such as might have been expected from encounters with cosmic-ray particles.

Philpott, D. E.↗
NASA NTRS1974

Examination of Apollo 17 surface fines for porphyrins and aromatic hydrocarbons

An Apollo 17 surface fines sample 75081,78, collected from Station 5, was extracted and examined fluorometrically. No porphyrins were found with fluorometric methods capable of detecting 2 times 10 to the minus 14th moles/g of Ni-mesoporphyrin IX in the sample. Also aromatic hydrocarbons were undetected.

Rho, J. H.↗
NASA NTRS1976

Visual examination apparatus

An automated visual examination apparatus for measuring visual sensitivity and mapping blind spot location including a projection system for displaying to a patient a series of visual stimuli. A response switch enables him to indicate his reaction to the stimuli, and a recording system responsive to both the visual stimuli per se and the patient's response. The recording system thereby provides a correlated permanent record of both stimuli and response from which a substantive and readily apparent visual evaluation can be made.

Haines, R. F.↗
NASA NTRS1976

Experimental examination of similarity measures and preprocessing methods used for image registration

The criterion used to measure the similarity between images and thus find the position where the images are registered is examined. The three similarity measures considered are the correlation coefficient, the sum of the absolute differences, and the correlation function. Three basic types of preprocessing are then discussed: taking the magnitude of the gradient of the images, thresholding the images at their medians, and thresholding the magnitude of the gradient of the images at an arbitrary level to be determined experimentally. These multitemporal registration techniques are applied to remote imagery of agricultural areas.

Svedlow, M.↗
NASA NTRS1978

Surface examination of small particles

Electron-microscopy specimen-preparation technique is used to study micron size particles. Process involves coating particles with vacuum-evaporated carbon, dissolving particles in solvent, then examining residue. Process is applicable to study of catalysts, nucleation and growth of metal oxides, and to determine chemical nature of lubricated surfaces after wear has occurred.

Buzek, B. C.↗
NASA NTRS1977

Comparison of linear inversion methods by examination of the duality between iterative and inverse matrix methods

Linear numerical inversion methods applied to atmospheric remote sounding generally can be categorized in two ways: (1) iterative, and (2) inverse matrix methods. However, these two categories are not unrelated; a duality exists between them. In other words, given an iterative scheme, a corresponding inverse matrix method exists, and conversely. This duality concept is developed for the more familiar linear methods. The iterative duals are compared with the classical linear iterative approaches and their differences analyzed. The importance of the initial profile in all methods is stressed. Calculations using simulated data are made to compare accuracies and to examine the dependence of the solution on the initial profile.

Fleming, H. E.↗
NASA NTRS1978

Apparatus for use in examining the lattice of a semiconductor wafer by X-ray diffraction

An improved apparatus for examining the crystal lattice of a semiconductor wafer utilizing X-ray diffraction techniques was presented. The apparatus is employed in a method which includes the step of recording the image of a wafer supported in a bent configuration conforming to a compound curve, produced through the use of a vacuum chuck provided for an X-ray camera. The entire surface thereof is illuminated simultaneously by a beam of incident X-rays which are projected from a distant point-source and satisfy conditions of the Bragg Law for all points on the surface of the water.

Parker, D. L.↗
NASA NTRS1978

Examination of the DSN X-band weather specification

Effects of weather on Deep Space Network system performance at X-band are examined by comparing a record of 64 meter system noise temperatures with weather observations taken at approximately the same times and places.

Source record↗
NASA NTRS1978

A critical examination of expansion tunnel performance

An experimental study of the performance of the expansion tunnel for various test gases and range of quiescent acceleration section and nozzle pressure, nozzle geometric area ratio, and nozzle axial station has been performed. Flow diagnostics used to examine expansion tunnel flow characteristics were time histories and profiles of pitot pressure and axial component of flow velocity. The purpose of this study was to determine experimentally what limitations might restrict predicted operational flexibility and the advantages and disadvantages of this mode of operation as compared to the expansion tube. Results are presented which demonstrate the expansion tunnel offers several advantages over the expansion tube, but the severity of the disadvantages of the tunnel makes the expansion tube mode of operation the more desirable for performing hypersonic-hypervelocity aerothermodynamic studies of proposed entry configurations.

Miller, C. G.↗
NASA NTRS1979

An examination of a group-velocity criterion for the breakdown of an idealized vortex flow

The phenomenon of vortex breakdown is believed to be associated with a finite amplitude wave that has become trapped at the critical or breakdown location. The conditions at which the propagating waves become trapped at a certain axial location were examined by use of a group-velocity criterion implied by Landahl's general theory of wave trapping. An ideal vortex having constant vorticity and uniform axial velocity at the inlet of a slowly diverging duct was studied. The linear wave propagation analysis is applied to the base flow at several axial stations for several values of the ratio of swirl velocity to axial velocity at the inlet of the divergent duct, assuming a locally parallel flow. The dipsersion relations and hence the group velocities of both the symmetric (n = 0) and asymmetric modes (n = + or - 1) were investigated. The existence of a critical state in the flow (at which the group velocity vanishes), and its relationship to the stagnation point on the axis of the duct and to the occurrence of an irregular singularity in the equations governing wave propagation in the flow field are discussed.

Tsai, C. Y.↗
NASA NTRS1978

A systems examination of the opportunities of coal for California

Because of decreasing availability of petroleum fuels and natural gas, it is imperative that alternative means be developed for meeting demands. The options available for importing energy derived from coal are examined. These include: (1) electric power generated from coal; (2) coal gasification near the mine site for conversion to substitute natural gas or liquid products such as methanol or hydrocarbons; and (3) converting the coal directly to liquid hydrocarbons similar to a synthetic crude oil. Comment is made on the long lead times required between conception and completion of facilities of this type. Because of political and economic impediments, excessive delays have resulted in cancellation of projects. The need for statesmen and citizens with vision and courage to act is summarized.

Hathaway, W. M.↗
NASA NTRS1979

Examination of Lambertian and Non-lambertian Models for Simulating the Topographic Effect on Remotely Sensed Data

As a preliminary step to developing a technique to eliminate the topographic effect from remotely sensed data, two radiance simulation models were examined and compared. A Lambertian and a non-Lambertian model were tested using hand-held radiometer measurements from a uniform surface at different slope angle aspect orientations. Linear correlation coefficients for the non-Lambertian model and the field spectra were calculated to be greater than 0.92 for all cases; whereas correlation coefficients for the Lambertian model ranged from 0.06 to 0.98. An assumption regarding an empirical constant within the non-Lambertian equation was found to be invalid and the model was improved by using subsets of the data to derive the empirical value.

Justice, C.↗
NASA NTRS1978

An examination of the relationships between selected ground properties and Landsat MSS data in an area of complex terrain in southern Italy

The paper deals with the method and results of a study which involved an examination of the statistical relationships between selected ground properties and Landsat MSS data, and whose aim was to assess the applicability of Landsat data to surface cover mapping in areas characterized by high-frequency spatial variations of surface cover type over small areas. The results indicate that by systematic ground data collection it is possible to understand the basic relationships between ground properties and Landsat sensor data in areas of complex surface cover and terrain, and to classify the cover types.

Justice, C. O.↗
NASA NTRS1981

Examination of silicon solar cells by means of the Scanning Laser Acoustic Microscope (SLAM)

The Scanning Laser Acoustic Microscope produces images of internal structure in materials. The acoustic microscope is an imaging system based upon acoustic rather than electromagnetic waves. Variations in the elastic propertis are primarily responsible for structure visualized in acoustic micrographs. The instrument used in these investigations is the SONOMICROSCOPE 100 which can be operated at ultrasonic frequencies of from 30 MHz to 500 MHz. The examination of the silicon solar cells was made at 100 MHz. Data are presented in the form of photomicrographs.

Vorres, C.↗