Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “evaporation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Containerless study of metal evaporation by laser induced fluorescence

Laser induced fluorescence (LIF) detection of atomic vapors was used to study evaporation from electromagnetically levitated and CW CO2 laser-heated molybdenum spheres and resistively-heated tungsten filaments. Electromagnetic (EM) levitation in combination with laser heating of tungsten, zirconium, and aluminum specimens was also investigated. LIF intensity vs temperature data were obtained for molybdenum atoms and six electronic states of atomic tungsten, at temperatures up to the melting point of each metal. The detected fraction of the emitted radiation was reduced by self-absorption effects at the higher experimental temperatures. Vaporization enthalpies derived from data for which less than half the LIF intensity was self-absorbed were -636 + or - 24 kJ/g-mol for Mo and 831 + or - 32 kJ/g-mol for W. Space-based applications of EM levitation in combination with radiative heating are discussed.

Schiffman, Robert A.↗
NASA NTRS1988

Sequentially evaporated thin Y-Ba-Cu-O superconductor films: Composition and processing effects

Thin films of YBa2Cu3O(7-beta) have been grown by sequential evaporation of Cu, Y, and BaF2 on SrTiO3 and MgO substrates. The onset temperatures were as high as 93 K while T sub c was 85 K. The Ba/Y ratio was varied from 1.9 to 4.0. The Cu/Y ratio was varied from 2.8 to 3.4. The films were then annealed at various times and temperatures. The times ranged from 15 min to 3 hr, while the annealing temperatures used ranged from 850 C to 900 C. A good correlation was found between transition temperature (T sub c) and the annealing conditions; the films annealed at 900 C on SrTiO3 had the best T sub c's. There was a weaker correlation between composition and T sub c. Barium poor films exhibitied semiconducting normal state resistance behavior while barium rich films were metallic. The films were analyzed by resistance versus temperature measurements and scanning electron microscopy. The analysis of the films and the correlations are reported.

Valco, George J.↗
NASA NTRS1988

Deposition and characterization of ZnS/Si heterojunctions produced by vacuum evaporation

Isotype heterojunctions of ZnS (lattice constant 5.41 A) were grown on silicon (lattice constant 5.43 A) p-n junctions to form a minority-carrier mirror. The deposition process was vacuum evaporation from a ZnS powder source onto a heated (450 C) substrate. Both planar (100) and textured (111) surfaces were used. A reduction of the minority-carrier recombination at the surface was seen from increased short-wavelength quantum response and increased illuminated open-circuit voltage. The minority-carrier diffusion length was not degraded by the process.

Landis, Geoffrey A.↗
NASA NTRS1988

Characterization of ZrO2 buffer layers for sequentially evaporated Y-Ba-CuO on Si and Al2O3 substrates

Thin film high temperature superconductors have the potential to change the microwave technology for space communications systems. For such applications it is desirable that the films be formed on substrates such as Al2O3 which have good microwave properties. The use of ZrO2 buffer layers between Y-Ba-Cu-O and the substrate has been investigated. These superconducting films have been formed by multilayer sequential electron beam evaporation of Cu, BaF2 and Y with subsequent annealing. The three layer sequence of Y/BaF2/Cu is repeated four times for a total of twelve layers. Such a multilayer film, approximately 1 micron thick, deposited directly on SrTiO3 and annealed at 900 C for 45 min produces a film with a superconducting onset of 93 K and critical temperature of 85 K. Auger electron spectroscopy in conjunction with argon ion sputtering was used to obtain the distribution of each element as a function of depth for an unannealed film, the annealed film on SrTiO3 and annealed films on ZrO2 buffer layers. The individual layers were apparent. After annealing, the bulk of the film on SrTiO3 is observed to be fairly uniform while films on the substrates with buffer layers are less uniform. The Y-Ba-Cu-O/ZrO2 interface is broad with a long Ba tail into the ZrO2, suggesting interaction between the film and the buffer layer. The underlying ZrO2/Si interface is sharper. The detailed Auger results are presented and compared with samples annealed at different temperatures and durations.

Valco, George J.↗
NASA NTRS1988

Evaporation over land surfaces - First results from HAPEX-MOBILHY Special Observing Period

Preliminary results are presented from the May 7-July 15, 1986 Special Observing Period (SOP) of the HAPEX-MOBILHY program, which examines the hydrological budget and evaporation flux at the scale of a 10,000 sq km GCM grid square to determine soil moisture, surface-energy budgets, and surface hydrology. The SOP used two highly instrumented remote sensing aircraft to obtain detailed measurements of atmospheric fluxes and surface properties. It is noted that the measurements are reliable at spatially local and short time scales, as well as on the monthly time scale. The data base obtained may be used in parametrization schemes against which land-surface water budgets can be tested.

Andre, Jean-Claude↗
NASA NTRS1986

Laboratory studies of the deposition of alkali sulfate vapors from combustion gases using a flash-evaporation technique

A relatively simple experimental technique is proposed and demonstrated for making measurements of absolute dewpoints and relative deposition rates from flowing combustion gases containing condensible inorganic vapors. The method involves first accumulating condensate on a Pt ribbon target maintained below the dewpoint and then flash-evaporating the condensate into the filament wake, where its alkali content is monitored by alkali-atom emission spectroscopy. The advantages of the method over others are demonstrated; in particular, the method can detect liquid condensate inventories which are small enough to be negligibly influenced by surface runoff produced by gas-side shear stress and liquid condensate surface tension gradients. Illustrative Na2SO4 and K2SO4 deposition rate data and corresponding dewpoint data obtained in a series of alkali-seeded propane/air atmospheric flames are presented and discussed.

Rosner, Daniel E.↗
NASA NTRS1989

Highly oriented Tl2Ba2Ca2Cu3O10 thin films by pulsed laser evaporation

Superconducting thin films on MgO (100) substrates with nearly pure Tl2Ba2Ca2Cu3O10 (2:2:2:3) phase using pulsed laser evaporation and postannealing have been fabricated. The films had c axes perpendicular to the substrates. Superconducting films with onset temperatures of 125 K and zero resistance at 110 K were obtained. X-ray microprobe fluorescence measurements indicate that a typical composition of films is Tl(0.66)Ba(1.77)Ca(1.46)Cu3O(x) which is low in Tl compared to that expected for the 2:2:2:3 phase. A typical grain size is greater than 10 microns revealed by scanning electron microscopy.

Liou, S. H.↗
NASA NTRS1988

Evaporation, ignition and combustion of nondilute clusters of drops

A theory of evaporation, ignition, and burning of moderately dense spherical drop clusters has been developed. The theory takes into account burning of premixed air and fuel internal to the cluster at ignition and subsequent burning of fuel emitted from the cluster by a flame sheet surrounding it. The model considers interdrop interaction, momentum exchange between drops and gas, and turbulent exchange processes between the cluster and its surroundings. Calcualtions are performed for varying initial air to fuel mass ratios, initial cluster radii, ambient gas temperatures, and initial drop temperatures. Results are presented for fuel burn fractions at ignition and at the moment of drop disappearance, as well as jump conditions at ignition.

Bellan, J.↗
NASA NTRS1989

Computations of turbulent evaporating sprays

A computational study of turbulent evaporating sprays is reported. The major focus is to examine the sensitivity of the vaporization behavior of turbulent sprays to the transient liquid-phase processes. Three models considered to represent these processes are the thin skin, infinite diffusion, and diffusion limit models. Favre-averaged equations with k-epsilon-g turbulence model are employed for the gas phase. The Lagrangian approach with a stochastic separated flow method is used for the liquid phase where the effects of gas turbulence on droplet trajectories and interphase transport rates are considered using random-walk computations. Also the variable-property effects are considered in detail. Results indicate that, depending upon the boiling temperature and heat of vaporization of the fuel considered, the vaporization behavior of turbulent sprays may be quite sensitive to the modeling of transient liquid-phase processes. Thus, it is important that for most hydrocarbon fuels these processes be adequately represented in any comprehensive spray computations. The present results also provide further support to the conclusions of earlier studies which have been based on simplified spray configurations.

Aggarwal, S. K.↗
NASA NTRS1990

Convective Evaporation Of Clusters Of Drops

Report presents results of continuing theoretical research in behaviors of sprayed liquid fuels at temperatures characteristic of furnaces. Two earlier papers arising from this investigation described in "Evaporation of Dense Fuel Sprays" (NPO-16954).

Bellan, Josette↗
NASA NTRS1990

Behavior Of Evaporating Liquid Drops In Clusters

Report presents critical analysis of methods, developed for calculating behavior of evaporating liquid drops in dense and dilute clusters. Essential to understanding variety of physical and chemical phenomena occurring in combustion of sprayed fuels and in sprays used in agriculture, food industry, and painting. Presents insights on important aspects of two-phase flow.

Bellan, Josette↗
NASA NTRS1990

Ellipsometric study of YBa2Cu3O(7-x) laser ablated and co-evaporated films

High temperature superconducting films of YBa2Cu3O(7-x) (YBCO were grown on SrTiO3, LaA1O3, and YSZ substrates using two techniques: excimer laser ablation with in situ annealing and co-evaporation of Y, Cu, and BaF2 with ex-situ annealing. Film thicknesses were typically 5000 A, with predominant c-axis alignment perpendicular to the substrate. Critical temperatures up to Tc(R=O)=90 K were achieved by both techniques. Ellipsometric measurements were taken in the range 1.6 to 4.3 eV using a variable angle spectroscopic ellipsometer. The complex dielectric function of the laser ablated films was reproducible from run to run, and was found to be within 10 percent of that previously reported for (001) oriented single crystals. A dielectric overlayer was observed in these films, with an index of refraction of approximately 1.55 and nearly zero absorption. For the laser ablated films the optical properties were essentially independent of substrate material. The magnitude of the dielectric function obtained for the co-evaported films was much lower than the value reported for single crystals, and was sample dependent.

Alterovitz, S. A.↗
NASA NTRS1989

Electron beam flash evaporation for YBaCuO and BiCaSrCuO thin films

An electron beam flash evaporation technique is described which reproduces the stoichiometry of superconducting YBa(2)Cu(3)O(x) (123), Bi(2)CaSr(2)Cu(2)O(y) (2122), and Bi(2)Ca(2)Sr(2)Cu(3)O(z) (2223) source powders. Films of each material deposited with this technique exhibit zero resistance temperatures of 78 K or above when furnace annealed; 75 K zero temperatures are obtained for 123 films in situ annealed with atomic oxygen at 775 C. Transport critical current densities are 10,000 A/sq cm in 25-micron stripes patterned from 123 films, and 60,000 A/sq cm in 1-mm stripes of 2122 and 2223 films using a 1-microV/mm measurement criteria. Typical normal state resistivities are 700 micro-ohm cm for 2122 and 2223 films and 5 micro-ohm cm for 123 films. The 2122 films are highly textured with the c axis normal to the substrate. All results are for films deposited on MgO.

Davis, Matthew F.↗
NASA NTRS1990

Turbulence modulation effect on evaporating spray characterization

The effects of turbulence modulation on the evaporating spray characteristics of a liquid fuel jet are numerically investigated. Two modulation models are implemented into the k-epsilon two-equation model. The gas phase is solved by a pressure-based method on a Eulerian frame and droplets are solved by a stochastic discrete particle technique based on Lagrangian formulation. The k-epsilon models are used to characterize the time and length scales of the gas phase turbulence for droplet dispersions and droplet/turbulence interactions. The modulation models are found to have significant effects on gas phase dynamics, and are less important for the droplet dynamics. Numerical predictions are compared with the experimental data of Drallemier and Peters (1990).

Shang, H. M.↗
NASA NTRS1990

Evaporation, ignition, and combustion of nondilute clusters of drops

A theory of evaporation, ignition, and burning of moderately dense spherical drop clusters has been developed. The theory takes into account burning of premixed air and fuel internal to the cluster at ignition and subsequent burning of fuel emitted from the cluster by a flame sheet surrounding it. The model considers interdrop interaction, momentum exchange between drops and gas, and turbulent exchange processes between the cluster and its surroundings. Calculations are performed for varying initial air-to-fuel-mass ratios, initial cluster radii, ambient gas temperatures and initial drop temperatures. Results are presented for ratios of fuel mass burned to fuel mass lost from the cluster between drop ignition and drop disappearance, fuel burned fractions at ignition and at the moment of drop disappearance, and jump conditions at ignition.

Bellan, J.↗
NASA NTRS1990

Drop evaporation in a single-axis acoustic levitator

A 20 kHz single-axis acoustic positioner is used to levitate aqueous-solution drops (volumes less than or approximately equal to 100 micro-liters). Drop evaporation rates are measured under ambient, isothermal conditions for different relative humidities. Acoustic convection around the levitated sample enhances the mass loss over that due to natural convection and diffusion. A theoretical treatment of the mass flow is developed in analogy to previous studies of the heat transfer from a sphere in an acoustic field. Predictions of the enhanced mass loss, in the form of Nusselt (Sherwood) numbers, are compared with observed rages of drop shrinking. The work is part of an ESA crystal growth from levitated solution drops.

Lierke, E. G.↗
NASA NTRS1991

Chronology of early Archaean granite-greenstone evolution in the Barberton Mountain Land, South Africa, based on precise dating by single zircon evaporation

Precise Pb-207/Pb-206 single zircon evaporating ages are reported for low-grade felsic metavolcanic rocks within the Onverwacht and Fig Tree Groups of the Barberton Greenstone Belt (BGB), South Africa, as well as for granitoid plutons bordering the belt. Dacitic tuffs of the Hooggenoeg Formation in the upper part of the Onverwacht Group are shown to yield ages between 3445 + or - 3 and 3416 + or - 5 Ma and to contain older crustal components represented by a 3504 + or - 4 Ma old zircon xenocryst. Fig Tree dacitic tuffs and agglomerates have euhedral zircons between 3259 + or - 3 Ma in age which are interpreted to reflect the time of crystallization. The comagmatic relationships between greenstone felsic volcanic units and the surrounding plutonic suites are keynoted. The data adduced show that the Onverwacht and Fig Tree felsic units have distinctly different ages and thus do not constitute a single, tectonically repeated unit as proposed by others. It is argued that conventional multigrain zircon dating may not accurately identify the time of felsic volcanic activity in ancient greenstones, and that the BGB in the Kaapval craton of southern Africa and greenstones in the Pilbara Block of Western Australia may have been part of a larger crustal unit in early Archaean times.

Kruener, Alfred↗
NASA NTRS1991

X-ray irradiation of interstellar grains in active galaxies - Evaporation and infrared spectra

A fundamental physical study of grains heated transiently by X-rays is presented. The X-ray photoionization cross sections used to determine the rate of energy deposition into the grains are given. A grain model is constructed and the radiative and evaporative responses of grains into X-ray absorption are described. The basic theory of stochastic grain heating is outlined, and analytical expressions for the temperature distributions of flickering grains are provided. The resulting IR spectra due to X-ray illumination are given, and the relevance of the present work to the IR continua of active galaxies is discussed. The present model provides two observational predictions: the infrared spectra of grains, even if they are superheated, should show a cutoff between 1 and 3 microns; and X-ray-illuminated environments should exhibit no PAH emissions.

Voit, G. M.↗