Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “error field”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Determination of the ocean circulation using Geosat altimetry

A spherical harmonic model of the sea surface topography complete to degree and order 10 and a model of the earth's geopotential field complete to degree and order 50 have been obtained in a simultaneous solution using Geosat altimeter data and tracking data from 14 different satellites. The sea surface topography model compares well with oceanographic models computed using hydrographic data and ship drift data. Currently, errors in the estimated gravity field model limit the determination of the spherical harmonic coefficients of the general ocean circulation to degrees 10 and lower, corresponding to a minimum wavelength of 4000 km. Error analysis indicates that the correlation between the geoid and the sea surface topography model is less than 0.2, indicating good separation of the geoid and the sea surface topography at wavelengths of 4000 km or longer. Estimates of the scale factor for the significant wave height (H1/3), which is used to compute the electromagnetic bias correction and the bias for the Geosat altimeter, are obtained. The estimate of the H1/3 correction is 3.6 + or - 1.5 percent, and the height bias estimate is zero.

Nerem, R. S.↗
DOE OSTI2025

Correlation effects in magic-angle twisted bilayer graphene: An auxiliary-field quantum Monte Carlo study

Magic-angle twisted bilayer graphene (MATBG) presents a fascinating platform for investigating the effects of electron interactions in topological flat bands. The Bistritzer-MacDonald (BM) model provides a simplified quantitative description of the flat bands. Introducing long-range Coulomb interactions leads to an interacting BM (IBM) Hamiltonian, a momentum-space continuum description which offers a very natural starting point for many-body studies of MATBG. Accurate and reliable many-body computations in the IBM model are challenging, however, and have been limited mostly to special fillings or smaller lattice sizes. We employ a state-of-the-art auxiliary-field quantum Monte Carlo (AFQMC) method to study the IBM model, which constrains the sign problem to enable accurate treatment of large system sizes. We determine ground-state properties and quantify errors compared to mean-field theory calculations. Our calculations identify correlated metal states and their competition with the insulating Kramers intervalley-coherent state at both half-filling and charge neutrality. Additionally, we investigate one- and three-quarter fillings, and examine the effect of many-body corrections beyond single Slater determinant solutions. We discuss the effect that details of the IBM Hamiltonian have on the results, including different forms of double-counting corrections, and the need to establish and precisely specify many-body Hamiltonians to allow more direct and quantitative comparisons with experiments in MATBG. Published by the American Physical Society 2025

Xiao, Zhi-Yu (ORCID:0000000219531579)↗
NASA NTRS1972

Effects of interplanetary magnetic field on the propagation of flare-generated interplanetary shock waves.

The effects of an interplanetary magnetic field on the propagation of flare-generated interplanetary shock waves are investigated with an approximate analytical method. It is found that the interplanetary magnetic field is relatively unimportant for strong shocks as far as the shock speed and transit time are concerned. It has more significant effects for weak shocks. However, in all the situations examined, the error committed if the magnetic field is neglected is no more than 10%. It is suggested that a model without a magnetic field gives sufficiently accurate numerical results for the propagation of flare-generated shocks.

Tam, C. K. W.↗
NASA NTRS1987

Recognition of error symptoms in large systems

A methodology for automatically detecting symptoms of frequently occurring errors in large computer systems is developed. The proposed symptom recognition methodology and its validation are based on probabilistic techniques. The technique is shown to work on real failure data from two CYBER systems at the University of Illinois. The methodology allows for the resolution between independent and dependent causes and, also quantifies a measure of the strength of relationship among errors. Comparison made with failure/repair information obtained from field maintenance engineers shows that in 85% of the cases, the error symptoms recognized by our approach correspond to real system problems. Further, the remaining 15% although not directly supported by field data, were confirmed as valid problems. Some of these were shown to be persistent problems which otherwise would have been considered as minor transients and hence ignored.

Iyer, Ravishankar K.↗
DOE OSTI2022

Magnetic field mapping of inaccessible regions using physics-informed neural networks

A difficult problem concerns the determination of magnetic field components within an experimentally inaccessible region when direct field measurements are not feasible. In this paper, we propose a new method of accessing magnetic field components using non-disruptive magnetic field measurements on a surface enclosing the experimental region. Magnetic field components in the experimental region are predicted by solving a set of partial differential equations (Ampere’s law and Gauss’ law for magnetism) numerically with the aid of physics-informed neural networks (PINNs). Prediction errors due to noisy magnetic field measurements and small number of magnetic field measurements are regularized by the physics information term in the loss function. We benchmark our model by comparing it with an older method. The new method we present will be of broad interest to experiments requiring precise determination of magnetic field components, such as searches for the neutron electric dipole moment.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS2000

Stress Recovery and Error Estimation for 3-D Shell Structures

The C1-continuous stress fields obtained from finite element analyses are in general lower- order accurate than are the corresponding displacement fields. Much effort has focussed on increasing their accuracy and/or their continuity, both for improved stress prediction and especially error estimation. A previous project developed a penalized, discrete least squares variational procedure that increases the accuracy and continuity of the stress field. The variational problem is solved by a post-processing, 'finite-element-type' analysis to recover a smooth, more accurate, C1-continuous stress field given the 'raw' finite element stresses. This analysis has been named the SEA/PDLS. The recovered stress field can be used in a posteriori error estimators, such as the Zienkiewicz-Zhu error estimator or equilibrium error estimators. The procedure was well-developed for the two-dimensional (plane) case involving low-order finite elements. It has been demonstrated that, if optimal finite element stresses are used for the post-processing, the recovered stress field is globally superconvergent. Extension of this work to three dimensional solids is straightforward. Attachment: Stress recovery and error estimation for shell structure (abstract only). A 4-node, shear-deformable flat shell element developed via explicit Kirchhoff constraints (abstract only). A novel four-node quadrilateral smoothing element for stress enhancement and error estimation (abstract only).

Riggs, H. R.↗
NASA NTRS1978

A simplified algorithm for correcting both errors and erasures of R-S codes

Using the finite field transform and continued fractions, a simplified algorithm for decoding Reed-Solomon (R-S) codes is developed to correct erasures caused by other codes as well as errors over the finite field GF (q(m), where q is a prime and m is an integer. Such an R-S decoder can be faster and simpler than a decoder that uses more conventional methods.

Reed, I. S.↗
DOE OSTI2015

SU-E-T-114: Analysis of MLC Errors On Gamma Pass Rates for Patient-Specific and Conventional Phantoms

Purpose: To evaluate whether a 3D patient-specific phantom is better able to detect known MLC errors in a clinically delivered treatment plan than conventional phantoms. 3D printing may make fabrication of such phantoms feasible. Methods: Two types of MLC errors were introduced into a clinically delivered, non-coplanar IMRT, partial brain treatment plan. First, uniformly distributed random errors of up to 3mm, 2mm, and 1mm were introduced into the MLC positions for each field. Second, systematic MLC-bank position errors of 5mm, 3.5mm, and 2mm due to simulated effects of gantry and MLC sag were introduced. The original plan was recalculated with these errors on the original CT dataset as well as cylindrical and planar IMRT QA phantoms. The original dataset was considered to be a perfect 3D patient-specific phantom. The phantoms were considered to be ideal 3D dosimetry systems with no resolution limitations. Results: Passing rates for Gamma Index (3%/3mm and no dose threshold) were calculated on the 3D phantom, cylindrical phantom, and both on a composite and field-by-field basis for the planar phantom. Pass rates for 5mm systematic and 3mm random error were 86.0%, 89.6%, 98% and 98.3% respectively. For 3.5mm systematic and 2mm random error the pass rates were 94.7%, 96.2%, 99.2% and 99.2% respectively. For 2mm systematic error with 1mm random error the pass rates were 99.9%, 100%, 100% and 100% respectively. Conclusion: A 3D phantom with the patient anatomy is able to discern errors, both severe and subtle, that are not seen using conventional phantoms. Therefore, 3D phantoms may be beneficial for commissioning new treatment machines and modalities, patient-specific QA and end-to-end testing.

60 APPLIED LIFE SCIENCES↗
NASA NTRS1989

Experiments on structural control of sound transmitted through an elastic plate

Active control of sound transmission through an elastic plate has been experimentally studied. The control was applied directly to the plate by point force vibration inputs, and the error information and performance was measured in the radiated acoustic field by discrete microphones. Test cases were studied in which the error sensors were accelerometers mounted on the plate. A time-domain least-mean-squares adaptive algorithm was used as the basis of the control system design. The results showed an impressive increase in plate transmission loss over a wide range of frequencies with a maximum of two control shakers. The advantages of using error information derived from the radiated acoustic field rather than structural response is demonstrated. The mechanisms behind the efficiency of this control approach are discussed.

Fuller, C. R.↗
DOE OSTI2025

Collinear Three-Photon Excitation of a Strongly Forbidden Optical Clock Transition

The 1 𝑆 0 − 3 𝑃 0 clock transition in strontium serves as the foundation for the world’s best atomic clocks and for gravitational wave detector concepts in clock atom interferometry. This transition is weakly allowed in the fermionic isotope 87 Sr but strongly forbidden in bosonic isotopes. Here, we demonstrate coherent excitation of the clock transition in bosonic 88 Sr using a novel collinear three-photon process in a weak magnetic field. We observe Rabi oscillations with frequencies of up to 50 kHz using W/cm 2 laser intensities and Gauss-level magnetic field amplitudes. The absence of nuclear spin in bosonic isotopes offers decreased sensitivity to magnetic fields and optical lattice light shifts, enabling atomic clocks with reduced systematic errors. The collinear propagation of the laser fields permits the interrogation of spatially separated atomic ensembles with common laser pulses, a key requirement for dark matter searches and gravitational wave detection with next-generation quantum sensors.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2024

Error analysis of low-fidelity models for wake steering based on field measurements

The observations collected by two scanning lidars deployed on the roof of a 2.8-MW turbine undergoing a series of imposed yaw offsets are analyzed. The wake lateral displacement detected by the rear-facing lidar correlates well with the yaw offset sensed by the forward-facing lidar. We find that the high-frequency part of the yaw offset signal is connected to wake meandering, whereas the low frequency component is a good predictor for wake displacement due to yaw misalignment. Conditionally averaged wake velocity data for different yaw offsets are used as benchmarks for the validation of a linearized Reynolds-averaged Navier-Stokes and an empirical wake model. A mean error as low as 2% and a good prediction of the wake trajectory are achieved, provided that the wake recovery rate matches the observations.

17 WIND ENERGY↗
NASA NTRS2010

Reflector Surface Error Compensation in Dual-Reflector Antennas

By probing the field on a small subreflector at a minimal number of points, the main reflector surface errors can be obtained and subsequently used to design a phase-correction subreflector that can compensate for main reflector errors. The compensating phase-error profile across the subreflector can be achieved either by a surface deformation or by the use of an array of elements such as patch antennas that can cause a phase shift between the incoming and outgoing fields. The second option is of primary interest here, but the methodology can be applied to either case. The patch array is most easily implemented on a planar surface. Therefore, the example of a flat subreflector and a parabolic main reflector (a Newtonian dual reflector system) is considered in this work. The subreflector is assumed to be a reflector array covered with patch elements. The phase variation on a subreflector can be detected by a small number of receiving patch elements (probes). By probing the phase change at these few selected positions on the subreflector, the phase error over the entire surface can be recovered and used to change the phase of all the patch elements covering the subreflector plane to compensate for main reflector errors. This is accomplished by using a version of sampling theorem on the circular aperture. The sampling is performed on the phase-error function on the circular aperture of the main reflector by a method developed using Zernike polynomials. This method is based upon and extended from a theory previously proposed and applied to reflector aperture integration. This sampling method provides for an exact retrieval of the coefficients of up to certain orders in the expansion of the phase function, from values on a specifically calculated set of points in radial and azimuthal directions in the polar coordinate system, on the circular reflector aperture. The corresponding points on the subreflector are then obtained and, by probing the fields at these points, a set of phase values is determined that is then transferred back to the main reflector aperture for recovering the phase function. Once this function is recovered, the corresponding phase function on the subreflector is calculated and used to compensate for main reflector surface errors. In going back and forth between sub and main reflectors, geometrical (ray) optics is employed, which even though it ignores edge diffraction and other effects, is shown to be accurate for phase recovery.

Jamnejad, Vahraz↗
DOE OSTI2017

Casting the Coronal Magnetic Field Reconstruction Tools in 3D Using the MHD Bifrost Model

Quantifying the coronal magnetic field remains a central problem in solar physics. Nowadays, the coronal magnetic field is often modeled using nonlinear force-free field (NLFFF) reconstructions, whose accuracy has not yet been comprehensively assessed. Here we perform a detailed casting of the NLFFF reconstruction tools, such as π -disambiguation, photospheric field preprocessing, and volume reconstruction methods, using a 3D snapshot of the publicly available full-fledged radiative MHD model. Specifically, from the MHD model, we know the magnetic field vector in the entire 3D domain, which enables us to perform a “voxel-by-voxel” comparison of the restored and the true magnetic fields in the 3D model volume. Our tests show that the available π -disambiguation methods often fail in the quiet-Sun areas dominated by small-scale magnetic elements, while they work well in the active region (AR) photosphere and (even better) chromosphere. The preprocessing of the photospheric magnetic field, although it does produce a more force-free boundary condition, also results in some effective “elevation” of the magnetic field components. This “elevation” height is different for the longitudinal and transverse components, which results in a systematic error in absolute heights in the reconstructed magnetic data cube. The extrapolations performed starting from the actual AR photospheric magnetogram are free from this systematic error, while other metrics are comparable with those for extrapolations from the preprocessed magnetograms. This finding favors the use of extrapolations from the original photospheric magnetogram without preprocessing. Our tests further suggest that extrapolations from a force-free chromospheric boundary produce measurably better results than those from a photospheric boundary.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS2012

End-to-end Coronagraphic Modeling Including a Low-order Wavefront Sensor

To evaluate space-based coronagraphic techniques, end-to-end modeling is necessary to simulate realistic fields containing speckles caused by wavefront errors. Real systems will suffer from pointing errors and thermal and motioninduced mechanical stresses that introduce time-variable wavefront aberrations that can reduce the field contrast. A loworder wavefront sensor (LOWFS) is needed to measure these changes at a sufficiently high rate to maintain the contrast level during observations. We implement here a LOWFS and corresponding low-order wavefront control subsystem (LOWFCS) in end-to-end models of a space-based coronagraph. Our goal is to be able to accurately duplicate the effect of the LOWFS+LOWFCS without explicitly evaluating the end-to-end model at numerous time steps.

coronagraphs↗
NASA NTRS1979

Simplified algorithm for correcting both errors and erasures of Reed-Solomon codes

Using a finite-field transform, a simplified algorithm for decoding Reed-Solomon codes is developed to correct erasures as well as errors over the finite-field GF(q to the m power), where q is a prime and m is an integer. If the finite-field transform is a fast transform, this decoder can be faster and simpler than a decoder that uses more conventional methods.

Reed, I. S.↗
DOE OSTI2025

Micrometer: Micromechanics transformer for predicting full field mechanical responses of heterogeneous materials

Predicting mechanical responses of heterogeneous materials across scales remains a significant challenge. Traditional computational methods often struggle with complex and multiscale nature of these materials, limiting their effectiveness in real-world applications. Here, in this paper, we introduce Micrometer, a vision transformer based deep learning model designed to predict full field mechanical responses of heterogeneous materials, bridging the gap between computer vision and solid mechanics problems. We show that Micrometer, trained on a large-scale high-resolution dataset of 2D fiber-reinforced composites, can achieve state-of-the-art performance in predicting microscale strain fields across a wide range of material properties and loading conditions. Our model demonstrates accuracy and computational efficiency in applications such as computational homogenization and multiscale modeling, reducing computational time by up to two orders of magnitude compared to conventional numerical solvers while maintaining less than 1 % errors in predicting macroscale stress fields. Furthermore, we showcase Micrometer’s adaptability through transfer learning experiments on new materials with limited data, highlighting its potential to tackle diverse scenarios in computational solid mechanics. These results represent a significant step towards AI-driven innovation in materials science, addressing the limitations of traditional numerical methods and paving the way for more efficient simulations of heterogeneous materials across various industrial applications.

Composite materials↗
DOE OSTI2014

SU-F-BRF-03: Quality Assurance of Deformable Image Registration in Radiotherapy

Purpose: To introduce methods to analyze Deformable Image Registration (DIR) and identify regions of potential DIR errors. Methods: DIR Deformable Vector Fields (DVFs) quantifying patient anatomic changes were evaluated using the Jacobian determinant and the magnitude of DVF curl as functions of tissue density and tissue type. These quantities represent local relative deformation and rotation, respectively. Large values in dense tissues can potentially identify non-physical DVF errors. For multiple DVFs per patient, histograms and visualization of DVF differences were also considered. To demonstrate the capabilities of methods, we computed multiple DVFs for each of five Head and Neck (H'N) patients (P1–P5) via a Fast-symmetric Demons (FSD) algorithm and via a Diffeomorphic Demons (DFD) algorithm, and show the potential to identify DVF errors. Results: Quantitative comparisons of the FSD and DFD registrations revealed <0.3 cm DVF differences in >99% of all voxels for P1, >96% for P2, and >90% of voxels for P3. While the FSD and DFD registrations were very similar for these patients, the Jacobian determinant was >50% in 9–15% of soft tissue and in 3–17% of bony tissue in each of these cases. The volumes of large soft tissue deformation were consistent for all five patients using the FSD algorithm (mean 15%±4% volume), whereas DFD reduced regions of large deformation by 10% volume (785 cm{sup 3}) for P4 and by 14% volume (1775 cm{sup 3}) for P5. The DFD registrations resulted in fewer regions of large DVF-curl; 50% rotations in FSD registrations averaged 209±136 cm{sup 3} in soft tissue and 10±11 cm{sup 3} in bony tissue, but using DFD these values were reduced to 42±53 cm{sup 3} and 1.1±1.5 cm{sup 3}, respectively. Conclusion: Analysis of Jacobian determinant and curl as functions of tissue density can identify regions of potential DVF errors by identifying non-physical deformations and rotations. Collaboration with Phillips Healthcare, as indicated in authorship.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2020

Characterizing Dynamic Test Fixtures Through the Modal Projection Error

Across many industries and engineering disciplines, physical components and systems of components are designed and deployed into their environment of intended use. It is the desire of the design agency to be able to predict whether their component or system will survive its physical environment or if it will fail due to mechanical stresses. One method to determine if the component will survive the environment is to expose the component to a simulation of the environment in a laboratory. One difficulty in doing this is that the component may not have the same boundary condition in the laboratory as is in the field configuration. This paper presents a novel method of quantifying the error in the modal domain that occurs from the impedance difference between the laboratory test fixture and the next level of assembly in the field configuration. The error is calculated from the projection from one mode shape space to the other, and the error is in terms of each mode of the field configuration. This provides insight into the effectiveness of the test fixture with respect to the ability to recreate the mode shapes of the field configuration. A case study is presented to show that the error in the modal projection between two configurations is a lower limit for the error that can be achieved by a laboratory test.

42 ENGINEERING↗