Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ensemble methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Accessing the gluon momentum fraction of nucleons through the gradient flow

We calculate the gluon momentum fraction of the nucleon using lattice QCD, with a nonperturbative renormalization technique based on the gradient flow. The gluon momentum fraction is determined on a single Wilson-clover ensemble using 𝑁 𝑓 =2 +1 flavors with pion mass 358 MeV and lattice spacing 0.094 fm. We employ the variational method to reduce excited-state contamination and apply the distillation framework to ensure a large operator basis. To reduce systematic uncertainties, we apply Bayesian model averaging to all fit procedures. We apply matching coefficients to the flow-time dependent lattice results to recover the gluon momentum fraction in the $\overline{MS}$-scheme at 2 GeV. Our final result is ⟨𝑥⟩ 𝑔 ⁢(𝜇 =2 GeV) =0.482⁢(35), where we quote only statistical uncertainties.

Lattice QCD↗
DOE OSTI2023

Evolution of the Internal Climate Modes under Future Warming

Abstract Climate modes play an important role in weather and climate variability over multiple spatial and temporal scales. This research assesses Earth system model (ESM) projections of the spatiotemporal characteristics of key internal climate modes (NAM, SAM, PNA, ENSO, PDO, and AMO) under high (SSP585) and low (SSP126) radiative forcing scenarios and contextualizes those projections using historical fidelity. Time series analyses are used to assess trends and mode phase characteristics are summarized for the historical period and for the end of the twenty-first century. Spatial patterns are compared to infer morphological changes. Shifts in the power spectra are used to examine changes in variability at subannual, interannual, and interdecadal scales. Changes in time-lagged correlations are used to capture the evolution of first-order interactions. While differences in historical skill are predominantly ESM dependent, changing mode characteristics in a warmer climate also exhibit variability between individual ensemble realizations. NAM, SAM, and ENSO tend to evolve toward increased prevalence of the positive phase up to 2100 across the multimodel ensemble while the PNA and PDO exhibit little trend but increasing phase intensity. AMO characteristics are shown to depend on the method used to remove the external signal. ESMs that show higher historical fidelity tend to show more modest changes in those modes under global nonstationarity. Changes in mode interactions are found to be highly ESM dependent but exhibit broadly similar behavior to historical relationships. These findings have implications for our understanding of internal variability and make clear that the choice of ESM, and even the ESM realization, matters for applications of climate projections. Significance Statement Internal modes of variability are important to understand due to their impact on local, regional, and global weather and climate patterns. Future climate changes will not only be affected by the variability arising from these modes, but the modes will themselves change in response to the changing climate. Spatial and temporal aspects of the modes are assessed from projections of future climate and related to how well they are captured in the historical climate. This yields some measure of confidence in the changes exhibited by the models. In most cases, when historically skillful models exhibit changes that are different from those produced by less skillful models, they tend to produce more modest changes. These results, as well as the variability between model outcomes, mean decisions on which ESM to use for projections of the future climate matter significantly.

Meteorology & Atmospheric Sciences↗
NASA NTRS1994

11 micrometer emissivities and droplet radii for marine stratocumulus

The results of a new multispectral infrared retrieval scheme for obtaining fractional cloud cover and 11 micrometer emissivity with those of the spatial coherence method which obtains fractional cloud cover assuming that the clouds are opaque at infrared wavelengths. Both methods are applied to 4-km NOAA advanced very high resolution radiometer global area coverage data for 250-km-scale regions containing single-layered marine stratocumulus off the coast of South America. The average 11 micrometer emissivity for low level clouds is found to be between 0.70 and 0.85. The low emissivity is evidently due to the thinning of clouds at their edges. Semitransparent cloud edges evidently make up a substantial portion of the area covered by such clouds. This result indicates that cloud cover obtained using the spatial coherence method is underestimated by 0.1 to 0.2, as has been claimed in a previous study. The fractional cloud cover for the ensemble of 250-km-scale regions studied here increased slightly from 0.60 for daytime observations to 0.63 for nighttime observations. The 11 micrometer emissivity also increased slightly, but about half of the increase was related to the increase in cloud cover and a decrease in the relative area covered by cloud edge material. Presumably, the other half was due to an increase in cloud liquid water. Cloud height showed no significant change. The average effective droplet radius increased from 9.3 micrometers for daytime observations to 10.2 micrometers at night.

Luo, Gang↗
DOE OSTI2026

Beyond Point Estimates: Benchmarking Uncertainty Quantification Methods on the AION-1 Astronomical Foundation Model

Foundation models for astronomical surveys offer powerful learned representations that can be transferred to downstream regression tasks such as galaxy property estimation. However, point predictions alone are insufficient for scientific inference; reliable uncertainty quantification (UQ) is essential. We compare seven UQ methods on galaxy property regression using frozen AION-1 foundation-model embeddings, predicting redshift, stellar mass, stellar-population age, gas-phase metallicity, and specific star-formation rate, from Legacy Survey photometry/imaging and DESI spectra, with PROVABGS-derived labels. Distribution-free conformal methods achieve marginal coverage within $\sim$1 pp of the nominal 90% across all properties, while non-conformal baselines (Deep Ensembles, MC~Dropout) fail to calibrate reliably. Among conformal approaches, Conformalized Quantile Regression (CQR) delivers the best coverage in the bin with the poorest model predictions. More importantly, only the Locally Valid and Discriminative (LVD) framework -- particularly when operating on AION-1 embeddings -- also provides finite-sample \emph{local validity}, producing intervals that adapt to each galaxy's local prediction difficulty rather than relying on marginal guarantees alone. These results establish conformal prediction, and LVD in particular, as the preferred UQ framework for uncertainty-aware inference on foundation-model embeddings in astrophysics.

Tame-Narvaez, Karla [Fermilab] (ORCID:000000022249↗
NASA NTRS2000

Comparison of Fatigue Life Estimation Using Equivalent Linearization and Time Domain Simulation Methods

The Monte Carlo simulation method in conjunction with the finite element large deflection modal formulation are used to estimate fatigue life of aircraft panels subjected to stationary Gaussian band-limited white-noise excitations. Ten loading cases varying from 106 dB to 160 dB OASPL with bandwidth 1024 Hz are considered. For each load case, response statistics are obtained from an ensemble of 10 response time histories. The finite element nonlinear modal procedure yields time histories, probability density functions (PDF), power spectral densities and higher statistical moments of the maximum deflection and stress/strain. The method of moments of PSD with Dirlik's approach is employed to estimate the panel fatigue life.

Mei, Chuh↗
NASA NTRS1975

Pioneer 9 and OGO 5 observations of an interplanetary multiple shock ensemble on February 2, 1969

A multiple shock system was observed upstream (0.13 AU) of the earth by Pioneer 9 on February 2, 1969. The same system was observed at earth by Ogo 5 and was reported separately in the literature. This paper compares the two sets of observations in still further detail. Both magnetic-field and plasma data are used in a least-squares best-fit method to compute the characteristics of the fast forward shock wave (Pioneer 9 only) and two fast reverse shock waves. Nearly all major features (shock, piston, and tangential discontinuity) retained their characteristics during the transit of the shock ensemble from Pioneer 9 to Ogo 5. The genesis of the ensemble is believed to be due to a complex stream-stream interaction. A substantial density increase (including a large rise of alpha/proton abundance) at Ogo 5, but unobserved at Pioneer 9, is explained by a sudden meridional shift to a flow from below the ecliptic plane while the streams were en route to earth. This study demonstrates a spatial and temporal plasma inhomogeneity which is superimposed on the persistent major features.

Dryer, M.↗
NASA NTRS2001

Error Estimation of An Ensemble Statistical Seasonal Precipitation Prediction Model

This NASA Technical Memorandum describes an optimal ensemble canonical correlation forecasting model for seasonal precipitation. Each individual forecast is based on the canonical correlation analysis (CCA) in the spectral spaces whose bases are empirical orthogonal functions (EOF). The optimal weights in the ensemble forecasting crucially depend on the mean square error of each individual forecast. An estimate of the mean square error of a CCA prediction is made also using the spectral method. The error is decomposed onto EOFs of the predictand and decreases linearly according to the correlation between the predictor and predictand. Since new CCA scheme is derived for continuous fields of predictor and predictand, an area-factor is automatically included. Thus our model is an improvement of the spectral CCA scheme of Barnett and Preisendorfer. The improvements include (1) the use of area-factor, (2) the estimation of prediction error, and (3) the optimal ensemble of multiple forecasts. The new CCA model is applied to the seasonal forecasting of the United States (US) precipitation field. The predictor is the sea surface temperature (SST). The US Climate Prediction Center's reconstructed SST is used as the predictor's historical data. The US National Center for Environmental Prediction's optimally interpolated precipitation (1951-2000) is used as the predictand's historical data. Our forecast experiments show that the new ensemble canonical correlation scheme renders a reasonable forecasting skill. For example, when using September-October-November SST to predict the next season December-January-February precipitation, the spatial pattern correlation between the observed and predicted are positive in 46 years among the 50 years of experiments. The positive correlations are close to or greater than 0.4 in 29 years, which indicates excellent performance of the forecasting model. The forecasting skill can be further enhanced when several predictors are used.

Shen, Samuel S. P.↗
DOE OSTI2020

Sensor Drift Estimation for Reactor Systems by Fusing Multiple Sensor Measurements

A nuclear power plant is instrumented with a variety of sensors that monitor its variables to estimate the state and initiate safety actions, if needed. We address the problem of estimating drifts or errors in sensor measurements due to factors such as calibration changes. We propose an information fusion method that uses measurements from other sensors to generate an estimate of a sensor measurement, and its difference from an actual measurement provides an error estimate. We present two fusers based on the ensemble of trees and support vector machine that are trained using sensor measurements collected at an emulated test loop of a pressurized water reactor under no-drift conditions. We present error estimates for a differential pressure sensor of the heat exchanger of the primary coolant system, under twenty controlled scenarios using the test loop. Both positive and negative errors are captured by both methods in scenarios involving calibration drifts, blocking, air gap and electromagnetic interference. The root mean square errors of estimated drifts are typically within 2% percent of the maximum.

Rao, Nageswara↗
DOE OSTI2021

Cryo-EM structure determination of small proteins by nanobody-binding scaffolds (Legobodies)

We describe a general method that allows structure determination of small proteins by single-particle cryo-electron microscopy (cryo-EM). The method is based on the availability of a target-binding nanobody, which is then rigidly attached to two scaffolds: 1) a Fab fragment of an antibody directed against the nanobody and 2) a nanobody-binding protein A fragment fused to maltose binding protein and Fab-binding domains. The overall ensemble of ~120 kDa, called Legobody, does not perturb the nanobody–target interaction, is easily recognizable in EM images due to its unique shape, and facilitates particle alignment in cryo-EM image processing. The utility of the method is demonstrated for the KDEL receptor, a 23-kDa membrane protein, resulting in a map at 3.2-Å overall resolution with density sufficient for de novo model building, and for the 22-kDa receptor-binding domain (RBD) of SARS-CoV-2 spike protein, resulting in a map at 3.6-Å resolution that allows analysis of the binding interface to the nanobody. The Legobody approach thus overcomes the current size limitations of cryo-EM analysis.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Integrated hydrogeophysical modelling and data assimilation for geoelectrical leak detection

Time-lapse electrical resistivity tomography (ERT) measurements provide indirect observations of hydrological processes in the Earth's shallow subsurface at high spatial and temporal resolution. ERT has been used in the past decades to detect leaks and monitor the evolution of associated contaminant plumes. Specifically, inverted resistivity images allow visualization of the dynamic changes in the structure of the plume. However, existing methods do not allow the direct estimation of leak parameters (e.g. leak rate, location, etc.) and their uncertainties. We propose an ensemble-based data assimilation framework that evaluates proposed hydrological models against observed time-lapse ERT measurements without directly inverting for the resistivities. Each proposed hydrological model is run through the parallel coupled hydro-geophysical simulation code PFLOTRAN-E4D to obtain simulated ERT measurements. The ensemble of model proposals is then updated using an iterative ensemble smoother. In this paper, we demonstrate the proposed framework on synthetic and field ERT data from controlled tracer injection experiments. Our results show that the approach allows joint identification of contaminant source location, initial release time, and solute loading from the cross-borehole time-lapse ERT data, alongside with an assessment of uncertainties in these estimates. We demonstrate a reduction in site-wide uncertainty by comparing the prior and posterior plume mass discharges at a selected image plane. This framework is particularly attractive to sites that have previously undergone extensive geological investigation (e.g., nuclear sites). It is well suited to complement ERT imaging and we discuss practical issues in its application to field problems.

58 GEOSCIENCES↗
DOE OSTI2022

Level density within a micro-macroscopic approach

Statistical level density $ρ$($E, A$) is derived for nucleonic system with a given energy $E$, particle number $A$ and other integrals of motion in the micro-macroscopic approximation beyond the standard saddle-point method of the Fermi gas model. This level density reaches the two limits; the well-known Fermi gas grand-canonical ensemble limit for a large entropy $S$ related to large excitation energies, and the finite micro-canonical limit for a small combinatorical entropy $S$ at low excitation energies. In conclusion, the inverse level density parameter $K$ as function of the particle number $A$ in the semiclassical periodic orbit theory, taking into account the extended Thomas-Fermi and Strutinsky shell corrections, is calculated and compared with experimental data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Scaling carbon fluxes from eddy covariance sites to globe: synthesis and evaluation of the FLUXCOM approach

FLUXNET comprises globally distributed eddy-covariance-based estimates of carbon fluxes between the biosphere and the atmosphere. Since eddy covariance flux towers have a relatively small footprint and are distributed unevenly across the world, upscaling the observations is necessary to obtain global-scale estimates of biosphere–atmosphere exchange. Based on cross-consistency checks with atmospheric inversions, sun-induced fluorescence (SIF) and dynamic global vegetation models (DGVMs), here we provide a systematic assessment of the latest upscaling efforts for gross primary production (GPP) and net ecosystem exchange (NEE) of the FLUXCOM initiative, where different machine learning methods, forcing data sets and sets of predictor variables were employed. Spatial patterns of mean GPP are consistent across FLUXCOM and DGVM ensembles (R 2 >0.94 at 1° spatial resolution) while the majority of DGVMs show, for 70 % of the land surface, values outside the FLUXCOM range. Global mean GPP magnitudes for 2008–2010 from FLUXCOM members vary within 106 and 130 PgC yr -1 with the largest uncertainty in the tropics. Seasonal variations in independent SIF estimates agree better with FLUXCOM GPP (mean global pixel-wise R 2 ~0.75) than with GPP from DGVMs (mean global pixel-wise R 2 ~0.6). Seasonal variations in FLUXCOM NEE show good consistency with atmospheric inversion-based net land carbon fluxes, particularly for temperate and boreal regions (R 2 >0.92). Interannual variability of global NEE in FLUXCOM is underestimated compared to inversions and DGVMs. The FLUXCOM version which also uses meteorological inputs shows a strong co-variation in interannual patterns with inversions (R 2 =0.87 for 2001–2010). Mean regional NEE from FLUXCOM shows larger uptake than inversion and DGVM-based estimates, particularly in the tropics with discrepancies of up to several hundred grammes of carbon per square metre per year. These discrepancies can only partly be reconciled by carbon loss pathways that are implicit in inversions but not captured by the flux tower measurements such as carbon emissions from fires and water bodies. We hypothesize that a combination of systematic biases in the underlying eddy covariance data, in particular in tall tropical forests, and a lack of site history effects on NEE in FLUXCOM are likely responsible for the too strong tropical carbon sink estimated by FLUXCOM. Furthermore, as FLUXCOM does not account for CO 2 fertilization effects, carbon flux trends are not realistic. Overall, current FLUXCOM estimates of mean annual and seasonal cycles of GPP as well as seasonal NEE variations provide useful constraints of global carbon cycling, while interannual variability patterns from FLUXCOM are valuable but require cautious interpretation. Exploring the diversity of Earth observation data and of machine learning concepts along with improved quality and quantity of flux tower measurements will facilitate further improvements of the FLUXCOM approach overall.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Process-oriented stochastic perturbations applied to the parametrization of turbulence and shallow convection for ensemble prediction

Weather forecasting nowadays often requires some estimation of uncertainties associated with the output of meteorological models, in order to better inform decision making, especially in the context of intense weather events. Ensemble prediction systems provide such information through sets of possible scenarios which are designed to represent various uncertainty sources, including model uncertainties. A wide variety of methods have been proposed to estimate model uncertainties, among which perturbation methods targeting uncertain processes are a promising research field. Here, we focus on the representation of small-scale variability by process-oriented perturbation schemes applied to two key physical processes, namely turbulence and shallow convection. The perturbations are applied to a single-column version of the convection-permitting AROME model, in three idealized boundary-layer cases. Large-eddy simulations (LESs) of the same cases serve as a reference for the subgrid variability that has to be represented, and the results are also compared to those given by the Stochastically Perturbed Parametrization Tendencies (SPPT) method, which is a method commonly used by weather forecast centres to represent model uncertainty. The spread produced by our process-oriented perturbations of turbulence and shallow convection does not represent all the small-scale variability implied by the LESs for temperature and humidity. However, it is of a similar order of magnitude for the wind, thanks to perturbations generated by the stochastic turbulence scheme. The dispersion is structurally different from what is obtained with SPPT. It is non-negligible in the lower levels, where SPPT perturbations are usually suppressed because of numerical instabilities, indicating a possible complementarity between the schemes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Dynamic Interconversion of Metal Active Site Ensembles in Zeolite Catalysis

Catalysis science is founded on understanding the structure, number, and reactivity of active sites. Kinetic models that consider active sites to be static and noninteracting entities are routinely successful in describing the behavior of heterogeneous catalysts. Yet, active site ensembles often restructure in response to their external environment and even during steady-state catalytic turnover, sometimes requiring non-mean-field kinetic treatments to describe distance-dependent interactions among sites. Such behavior is being recognized more frequently in modern catalysis research, with the advent of experimental methods to quantify turnover rates with increasing precision, an expanding arsenal of operando characterization tools, and computational descriptions of atomic structure and motion at chemical potentials and timescales increasingly relevant to reaction conditions. This review focuses on dynamic changes to metal active site ensembles on zeolite supports, which are silica-based crystalline materials substituted with Al that generate binding sites for isolated and low-nuclearity metal site ensembles. Metal sites can become solvated and mobilized during reaction, facilitating interactions among sites that change their nuclearity and function. Such intersite communication can be regulated by the zeolite support, resulting in non-single-site and potentially non-mean-field kinetic behavior arising from mechanisms of catalytic action that combine elements of those canonically associated with homogeneous and heterogeneous catalysis. Here, we discuss recent literature examples that document dynamic active site behavior in metal-zeolites and outline methodologies to identify and interpret such behavior. We conclude with our outlook on future research directions to develop this evolving branch of catalysis science and harness it for practical applications.

operando characterization↗
NASA NTRS1992

Dynamically stratified Monte Carlo forecasting

A new method for performing Monte Carlo forecasts is introduced. The method, called dynamic stratification, selects initial perturbations based on a stratification of the error distribution. A simple implementation is presented in which the error distribution used for the stratification is estimated from a linear model derived from a large ensemble of 12-h forecasts with the full dynamic model. The stratification thus obtained is used to choose a small subsample of initial states with which to perform the dynamical Monte Carlo forecasts. Several test cases are studied using a simple two-level general circulation model with uncertain initial conditions. It is found that the method provides substantial reductions in the sampling error of the forecast mean and variance when compared to the more traditional approach of choosing the initial perturbations at random. The degree of improvement, however, is sensitive to the nature of the initial error distribution and to the base state. In practice the method may be viable only if the computational burden involved in obtaining an adequate estimate of the error distribution is shared with the data-assimilation procedure.

Schubert, Siegfried↗
DOE OSTI2023

Glueballs at physical pion mass

Glueballs are investigated through gluonic operators on two $ N_f=2+1 $ RBC/UKQCD gauge ensembles at the physical pion mass. The statistical errors of glueball correlation functions are considerably reduced through the cluster decomposition error reduction (CDER) method. The Bethe-Salpeter wave functions are obtained for the scalar, tensor, and pseudoscalar glueballs by using spatially extended glueball operators defined through the gauge potential $ A_\mu(x) $ in the Coulomb gauge. These wave functions exhibit similar features of non-relativistic two-gluon systems and are used to optimize the signals of the related correlation functions at the early time regions, where the ground state masses are extracted. These masses are close to those from the quenched approximation and indicate the possible existence of glueballs at the physical point. The resonance feature of glueballs and the mixing with conventional mesons and multi-hadron systems should be considered in a more systematic lattice study.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2026

Lattice calculation of light meson radiative leptonic decays

In this work, we perform a lattice QCD calculation of the branching ratios and the form factors\r\nof radiative leptonic decays P →ℓνℓγ (P= π,K) using Nf = 2+1 domain wall fermion ensembles\r\ngenerated by the RBC and UKQCD collaborations at the physical pion mass. We adopt the\r\ninfinite-volume reconstruction (IVR) method, which extends lattice data to infinite volume and\r\neffectively controls the finite-volume effects. This study represents a first step toward a complete\r\ncalculation of radiative corrections to leptonic decays using the IVR method, including both real\r\nphoton emissions and virtual photon loops. For decays involving a final-state electron, collinear\r\nradiative corrections, enhanced by the large logarithmic factors such as ln(m2\r\nπ/m2e) and ln(m2K/m2e), can reach the level of O(10%) and are essential at the current level of theoretical and experimental precision. After including these corrections, our result for π →eνeγ agrees with the PIBETA measurement; for K →eνeγ, our results are consistent with the KLOE data and exhibit a 1.7σtension with E36; and for K →µνµγ, where radiative corrections are negligible, our results confirm the previously observed discrepancies between lattice results and the ISTRA/OKA measurements at large photon energies, and with the E787 results at large muon–photon angles.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

ESMs Latent Space Exploration for Uncertainty Quantification and Spatiotemporal Downscaling

This final report for DOE Award DE-SC0023044 presents advances in two key areas of climate modeling: (1) representative climate model selection and (2) Earth System Model (ESM) downscaling using hybrid AI methods. The first section introduces a reordered, three-stage workflow to select representative GCM runs that more effectively balance historical skill with ensemble spread, validated across Texas, Bihar, and New York. The second section introduces two novel super-resolution frameworks, ViSIR and ViFOR, that integrate Vision Transformers with sinusoidal and Fourier-based implicit neural representations. These models achieve state-of-the-art reconstruction accuracy for ESM variables including surface temperature and heat fluxes. The report includes detailed methodology, benchmarks, and results, demonstrating significant gains in uncertainty quantification, spatial fidelity, and scalability for climate-impact studies.

54 ENVIRONMENTAL SCIENCES↗