Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “energy input”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Observations of joule and particle heating in the auroral zone

Observational data from the Chatanika, Alaska incoherent scatter radar have been used to deduce atmospheric heating rates associated with particle precipitation and joule dissipation. During periods when Chatanika is in the vicinity of the auroral oval the height-integrated heat input to the lower thermosphere can be as large as 100 ergs per sq cm per sec with joule and particle heating rates of comparable magnitude. Altitude profiles of these heat inputs are also obtained, showing that the energy liberated by joule dissipation tends to peak at a substantially higher altitude (about 130 km) than that due to particles (100-120 km). As a consequence, it follows that joule heating can be expected to provide a rapid means for creating thermospheric disturbances. It is also pointed out that joule and particle heating are permanent features of the auroral oval and polar cap. As such, expansion of the auroral oval leads to an increase in the total global heating and, hence, to the close relationship between magnetic disturbances and thermospheric perturbation.

Banks, P. M.↗

Broad beam ion source operation with four common gases

A Kaufman-type broad beam ion source, used for sputtering and etching purposes, has been operated with Ar, Kr, O2 and N2 gas inputs over a wide range of beam energies (200-1200 eV) and gas flow rates (1-10 sccm). The maximum ion beam current density for each gas saturates at about 2.5 mA/sq cm as gas flow is increased. The discharge threshold voltage necessary to produce a beam and the beam efficiency (beam current/molecular current), however, varied considerably. Kr had the lowest threshold and highest efficiency, Ar next, then N2 and O2. The ion beam current varied only weakly with beam energy for low gas flow rates, but showed a factor of two increase when the gas flow was higher.

Pak, S.↗

A study of EUV emission from the O4f star Zeta Puppis

Our 20 ks observation did not allow us to carry out our primary objective, i.e., to test the limitations of deeply embedded EUV and X-ray sources. However, it did provide a very useful constraint in our analysis of a newly acquired high S/N ROSAT PSPC X-ray spectrum of Zeta Pup. In addition, modifications to our stellar wind opacity code have been preformed to investigate the sensitivity of the EUV opacity energy range to different photospheric model flux inputs and different wind structures. These analyses provided the justification for a 140 ks follow up EUVE Cycle III observation of this star. We have recently been informed that our requested observation has been accepted as a Type 1 target for Cycle III. The remainder of this report focuses on the following: (1) a brief background on the status of X-ray emission from OB stars; (2) a discussion on the importance of EUV observations; (3) a discussion of our scientific objectives; and (4) a summary of our technical approach for our Cycle III observation (including the predicted EUV counts for various lines.)

Waldron, Wayne L.↗

Response of a two-dimensional dual-Doppler radar wind synthesis

The wind field resulting from a two-dimensional dual-Doppler synthesis algorithms is spectrally modified from the true wind field. The effects of spatial filtering on wind fields from the processes of interpolation, the averaging of pulses, and the effect of the finite radar pulse dimension were assessed. The effect resulting from the use of different interpolation techniques was also evaluated. Of those techniques tested, the best are the Cressman distance-weighted averaging and linear distance-weighted averaging, with the closest neighbor and uniform weighting having more undesirable characteristics. The optimum influence radius is defined as the influence radius at which the ratio of the rms difference between the Fourier and least-squares responses (a measure of the aliasing) and the variance of the filtered wind field is minimized. This seeks to minimize the effect of energy aliased into scales other than the input wavelength. For the Cressman interpolation technique, the optimum influence radius is between 1.85 and 2.25 times the maximum data spacing. The range of acceptable influence radii includes consideration of the filtering by the radar of the data as it is collected, as well as the resolution of the final dataset. The optimum influence radius is dependent upon the largest data separation in the analysis domain. The absolute optimum influence radius is not significantly affected by inclusion of the radar-beam filtering effects.

Given, Terence↗

Human Powered Centrifuge

A human powered centrifuge has independently established turntable angular velocity and human power input. A control system allows excess input power to be stored as electric energy in a battery or dissipated as heat through a resistors. In a mechanical embodiment, the excess power is dissipated in a friction brake.

Mulenburg, Gerald M.↗

Energy and Water Management

Energy efficiency isn't just a good idea; it's a necessity, both for cost reasons and to meet federal regulatory requirements. First, rising energy unit costs continue to erode NASA's mission budget. NASA spent roughly $156M on facility energy in FY 2007. Although that represents less than one per cent of NASA's overall annual budget, the upward trend in energy costs concerns the agency. While NASA reduced consumption 13%, energy unit costs have risen 63%. Energy cost increases counteract the effects of energy conservation, which results in NASA buying less yet spending more. The second factor is federal energy legislation. The National Energy Conservation Policy Act, as amended by the Energy Policy Act of 2005, Executive Order (EO) 13423 (January, 2007), and the Energy Independence and Security Act (December, 2007), mandates energy/water conservation goals for all federal agencies, including NASA. There are also reporting requirements associated with this legislation. The Energy/Water Management Task was created to support NASA Headquarters Environmental Management Division (HO EMD) in meeting these requirements. With assistance from TEERM, HQ EMD compiled and submitted the NASA Annual Report to the Department of Energy FY 2007. The report contains information on how NASA is meeting federally mandated energy and water management goals. TEERM monitored input for timeliness, errors, and conformity to the new energy/water reporting guidelines and helped compile the information into the final report. TEERM also assists NASA Energy/Water Management with proposal and award calls, updates to the energy/water management database, and facilitating communication within the energy/water management community. TEERM is also supporting NASA and the Interagency Working Group (IWG) on Hydrogen and Fuel Cells. Established shortly after the President announced the Hydrogen Fuel Initiative in 2003, this IWG serves as the mechanism for collaboration among the Federal agencies involved in hydrogen-related research, development, and demonstration. TEERM developed a matrix showing all Hydrogen and Fuel Cell activities from the various NASA centers to be included in the Group's extensive hydrogen research taxonomy of past, present, and future hydrogen activities of the Federal government.

Valek, Susan E.↗

Supercritical Water Oxidation (SCWO) for the treatment of spacecraft waste.

Supercritical water oxidation (SCWO) is a powerful waste treatment that has been considered as a substitute or complement to other potential spacecraft waste handling methods including jettisoning, compacted sealed storage, drying, and others. Combustible trash and garbage is mixed with water and then heated and pressurized above the critical point of water (705 °F and 218 atmospheres). The waste is nearly all oxidized to produce carbon dioxide, water and nitrogen. NOx is not formed. The combustion energy can be used to heat the input stream. SCWO is relatively complex, expensive, and hazardous compared to other methods. Oxidation of compounds containing chlorine and sulfur produces hydrochloric and sulfuric acid which can cause corrosion in the reactor. Neutralizing these acids produces salts which can precipitate and cause clogging. The major engineering challenges to implementing SCWO are chemical corrosion and fouling due to the deposition of salts. SCWO was first proposed for general waste treatment and for spacecraft in the 1980’s and extensive research has been carried out.

Harry W Jones↗

An Efficient and Effective Light Gas Gun Design for Millimeter-Scale Hypervelocity Testing

This paper serves to document a design for a light gas gun that was used for 3 decades at NASA’s Langley Research Center. By adapting readily-available equipment and supplies, this apparatus was capable of accelerating projectiles at up to 9 kilometers per second. The lack of a projectile-carrying sabot sacrifices some adaptability in projectile size, but results in a design that can be cleaned and cycled with far less labor input. Overall limitation on the projectile impact energies attainable effectively limit the applications to assessing the relatively thin shields employed for robotic spacecraft (as opposed to manned missions). The original gun has been decommissioned, but it is believed that this design has application for robotic spacecraft shield testing in the modern world, allowing cost-effective generation of larger sample sizes than with conventional sabot-based light gas guns.

Hypervelocity↗

An Efficient and Effective Light Gas Gun Design for Millimeter-scale Hypervelocity Testing

This paper serves to document a design for a light gas gun that was used for 3 decades at NASA’s Langley Research Center. By adapting readily-available equipment and supplies, this apparatus was capable of accelerating projectiles at up to 9 kilometers per second. The lack of a projectile-carrying sabot sacrifices some adaptability in projectile size, but results in a design that can be cleaned and cycled with far less labor input. Overall limitation on the projectile impact energies attainable effectively limit the applications to assessing the relatively thin shields employed for robotic spacecraft (as opposed to manned missions). The original gun has been decommissioned, but it is believed that this design has application for robotic spacecraft shield testing in the modern world, allowing cost-effective generation of larger sample sizes than with conventional sabot-based light gas guns.

Hypervelocity↗

An Efficient and Effective Light Gas Gun Design for Millimeter-Scale Hypervelocity Testing

This paper serves to document a design for a light gas gun that was used for 3 decades at NASA’s Langley Research Center. By adapting readily-available equipment and supplies, this apparatus was capable of accelerating projectiles at up to 9 kilometers per second. The lack of a projectile-carrying sabot sacrifices some adaptability in projectile size, but results in a design that can be cleaned and cycled with far less labor input. Overall limitation on the projectile impact energies attainable effectively limit the applications to assessing the relatively thin shields employed for robotic spacecraft (less useful for those used for manned missions). The original gun has been decommissioned, but it is believed that this design has application for robotic spacecraft shield testing in the modern world, allowing cost-effective generation of larger sample sizes than with conventional sabot-based light gas guns.

Scott Hull↗

An Efficient and Effective Light Gas Gun Design for Millimeter-scale Hypervelocity Testing

This paper serves to document a design for a light gas gun that was used for 3 decades at NASA’s Langley Research Center. By adapting readily-available equipment and supplies, this apparatus was capable of accelerating projectiles at up to 9 kilometers per second (when new). The lack of a projectile-carrying sabot sacrifices some adaptability in projectile size, but results in a design that can be cleaned and cycled with far less labor input. Overall limitation on the projectile impact energies attainable effectively limit the applications to assessing the relatively thin shields employed for robotic spacecraft (less useful for those used for manned missions). The original gun has been decommissioned, but it is believed that this design has application for robotic spacecraft shield testing in the modern world, allowing cost-effective generation of larger sample sizes than with conventional sabot-based light gas guns.

Scott Hull↗

A study of the thermal and optical characteristics of radiometric channels for Earth radiation budget applications

An improved dynamic electrothermal model for the Earth Radiation Budget Experiment (ERBE) total, nonscanning channels is formulated. This model is then used to accurately simulate two types of dynamic solar observation: the solar calibration and the so-called pitchover maneuver. Using a second model, the nonscanner active cavity radiometer (ACR) thermal noise is studied. This study reveals that radiative emission and scattering by the surrounding parts of the nonscanner cavity are acceptably small. The dynamic electrothermal model is also used to compute ACR instrument transfer function. Accurate in-flight measurement of this transfer function is shown to depend on the energy distribution over the frequency spectrum of the radiation input function. A new array-type field of view limiter, whose geometry controls the input function, is proposed for in-flight calibration of an ACR and other types of radiometers. The point spread function (PSF) of the ERBE and the Clouds and Earth's Radiant Energy System (CERES) scanning radiometers is computed. The PSF is useful in characterizing the channel optics. It also has potential for recovering the distribution of the radiative flux from Earth by deconvolution.

Mahan, J. R.↗

End-to-End Study of the Transfer of Energy from Magnetosheath Ion Precipitation to the Cusp

This paper describes a study of the effects of unstable magnetosheath distributions on the cusp ionosphere. An end-to-end numerical model was used to study, first, the evolved distributions from precipitation due to reconnection and, secondly, the energy transfer into the high latitude ionosphere based on these solar wind/magnetosheath inputs. Using inputs of several representative examples of magnetosheath injections, waves were generated at the lower hybrid frequency and energy transferred to the ionospheric electrons and ions. The resulting wave spectra and ion and electron particle heating was analyzed. Keywords: Ion heating: Magnetosheath/Ionosphere coupling: Particle/Wave Interactions. Simulations

Coffey, V. N.↗

Plasma arc welding repair of space flight hardware

A technique to weld repair the main combustion chamber of Space Shuttle Main Engines has been developed. The technique uses the plasma arc welding process and active cooling to seal cracks and pinholes in the hot-gas wall of the main combustion chamber liner. The liner hot-gas wall is made of NARloy-Z, a copper alloy previously thought to be unweldable using conventional arc welding processes. The process must provide extensive heat input to melt the high conductivity NARloy-Z while protecting the delicate structure of the surrounding material. The higher energy density of the plasma arc process provides the necessary heat input while active water cooling protects the surrounding structure. The welding process is precisely controlled using a computerized robotic welding system.

Hoffman, David S.↗

Two-temperature accretion disks with electron-positron pairs - Effects of Comptonized external soft photons

The present account of the effects of soft photons from external sources on two-temperature accretion disks in electron-positron pair equilibrium solves the energy-balance equation for a given radial distribution of the input rate of soft photons, taking into account their bremsstrahlung and Comptonization. Critical rate behavior is investigated as a function of the ratio of the energy flux of incident soft photons and the energy-generation rate. As in a previous study, the existence of a critical accretion rate is established.

Kusunose, Masaaki↗

Development and application of an optimization procedure for flutter suppression using the aerodynamic energy concept

An optimization procedure is developed based on the responses of a system to continuous gust inputs. The procedure uses control law transfer functions which have been partially determined by using the relaxed aerodynamic energy approach. The optimization procedure yields a flutter suppression system which minimizes control surface activity in a gust environment. The procedure is applied to wing flutter of a drone aircraft to demonstrate a 44 percent increase in the basic wing flutter dynamic pressure. It is shown that a trailing edge control system suppresses the flutter instability over a wide range of subsonic mach numbers and flight altitudes. Results of this study confirm the effectiveness of the relaxed energy approach.

Nissim, E.↗

Measured performance of a 1089 K (1500 deg F) heat storage device for sun-shade orbital missions

Tubes designed for a solar heat receiver to serve as an energy source for a Brayton power system were tested for 2002 hours and 1251 sun-shade cycles. The tubes were designed to transfer a constant thermal input to the Brayton system during an orbit. Excess solar energy during a sun period is stored as heat of fusion of lithium fluoride. The niobium - 1% zirconium tubes accommodate the 23 percent volume decrease of LiF during freezing. Test results showed slight, local distortions. The gas discharge temperature varied from 16 K (29 F) below to 28 K (50 F) above the nominal value of 1089 K (1500 F). The tube surface temperatures ranged from 1039 K (1410 F) to 1183 K (1670 F).

Namkoong, D.↗

GEWEX SRB Release 4: Public Release

The NASA/GEWEX Surface Radiation Budget (SRB) project produces 3-hourly shortwave and longwave surface and top of atmosphere radiative fluxes for the 1983-nearpresent time period. Here we announce the public availability of the new Release 4 Integrated data product (R4-IP). R4-IP uses the newly recalibrated and processed ISCCP HXS product as its primary input for cloud and radiance data, replacing ISCCP DX with a ninefold increase in pixel count (10km instead of 30km). This version retains a 1°x1° resolution but benefits from a much larger number of samples per grid box than the SRB Release 3. ISCCP also provides an atmospheric temperature and moisture dataset known as nnHIRS which we use here, along with Seaflux and Landflux surface and near-surface meteorological parameters constituting an “Integrated Product” for energy and water cycle studies. In addition to the input data improvements, several important algorithm improvements have been made since Release 3. These include recalculated shortwave (SW or solar wavelengths) atmospheric transmissivities and reflectivities yielding a somewhat less transmissive atmosphere. Both SW and LW (longwave or thermal infrared) also include variable aerosol composition and radiative properties, allowing for the use of a detailed aerosol history from the Max Planck Institute Aerosol Climatology (MAC). Both LW and SW algorithms now produce pristine sky fluxes, allowing the aerosol flux effects to be quantified. For SW, ocean albedo and snow/ice albedo are improved from Release 3. Total solar irradiance is now variable, and reduced to an average of 1361 Wm-2. The radiative treatment of ice cloud is improved. For the LW, a climatological monthly varying spectral surface emissivity is added.Here we analyze the new SW SRB datasets, comparing them to the previous Release 3, BSRN and PMEL surface measurements. Validation results show improved agreement compared to Release 3. Comparisons to ERBE and CERES TOA and surface satellite datasets before and after overlap periods show the long-term agreement with radiometric uncertainty. Monthly anomalies at global and zonal regions show very good correlation with the shorter ERBE and CERES flux anomalies linking those to the longer term. The uncertainties are discussed and periods of potential issues in inputs and/or algorithms are identified.

Earth energy budget↗