Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electron beams”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

A study of density measurements in hypersonic helium tunnels using an electron beam fluorescence technique

A series of experiments have been conducted at Langley Research Center to determine the feasibility of using electron-beam fluorescence to measure the free-stream static density of gaseous helium flow over a wide range of conditions. These experiments were conducted in the Langley hypersonic helium tunnel facility and its 3-inch prototype. Measurements were made for a range of stagnation pressures and temperatures and produced free-stream number densities of 1.53 x 10 to the 23rd to 1.25 x 10 to the 24th molecules/cu m and static temperatures from 2 K to 80 K. The results showed the collision quenching cross section to be 4.4 x 10 to the -15th sq cm at 1 K and to have a weak temperature dependence of T to the 1/6. With knowledge of these two values, the free-stream number density can be measured quite accurately.

Honaker, W. C.↗
NASA NTRS1986

Whistler-mode radiation from the Spacelab 2 electron beam

During the Spacelab 2 mission the Plasma Diagnostics Package (PDP) performed a fly-around of the Shuttle at distances of up to 300 meters while an electron beam was being ejected from the Shuttle. A magnetic conjunction of the Shuttle and the PDP while the electron gun was operating in a steady (DC) mode is discussed. During this conjunction, the PDP detected a clear funnel-shaped emission that is believed to be caused by whistler-mode emission from the beam. Ray-path calculations show that the shape of the funnel can be accounted for by whistler-mode waves propagating near the resonance cone. Because the beam and waves are propagating in the same direction, the radiation must be produced by a Landau interaction with the beam. Other types of waves generated by the beam are also described.

Gurnett, D. A.↗
NASA NTRS1997

Effect of Crystal Defects on Minority Carrier Diffusion Length in 6H SiC Measured Using the Electron Beam Induced Current Method

We report values of minority carrier diffusion length in n-type 6H SiC measured using a planar Electron Beam Induced Current (EBIC) method. Values of hole diffusion length in defect free regions of n-type 6H SiC, with a doping concentration of 1.7El7 1/cu cm, ranged from 1.46 microns to 0.68 microns. We next introduce a novel variation of the planar method used above. This 'planar mapping' technique measured diffusion length along a linescan creating a map of diffusion length versus position. This map is then overlaid onto the EBIC image of the corresponding linescan, allowing direct visualization of the effect of defects on minority carrier diffusion length. Measurements of the above n-type 6H SiC resulted in values of hole diffusion length ranging from 1.2 micron in defect free regions to below 0.1 gm at the center of large defects. In addition, measurements on p-type 6H SiC resulted in electron diffusion lengths ranging from 1.42 micron to 0.8 micron.

Tabib-Azar, Massood↗
NASA NTRS1986

The sensitivity of H alpha profiles to rapid electron beam fluctuations

In order to understand the temporal relationship between H alpha and hard X-ray emission predicted by the nonthermal electron thick target model of impulsive-phase energy transport the time-dependent theoretical H alpha profiles were computed for the dynamic model atmospheres of Fisher, Canfield, and McClymont, which simulate the effects of an impulsively initiated power-law beam of electrons. On the basis of the physical analysis it was expected that a very rapid H alpha response to an instantaneous increase in the flux of a nonthermal deka-keV electron beam, as compared to the timescale associated with the propagation of these electrons over characteristic flare coronal loop spatial scales. It was concluded that observational efforts to test the thick target nonthermal electron model through detection of impulsive H alpha brightenings associated with impulsive hard X-ray or microwave bursts should initially focus attention on the H alpha line center. Additional simultaneous blue-wing measurements will have substantial diagnostic potential.

Canfield, Richard C.↗
NASA NTRS1979

Detecting overpenetration of electron-beam welds

Gold plate beneath weldment reveals areas of excess penetration during X-ray inspection. Technique is applicable to critical electron-beam welds, such as those in gas turbines and pressure vessels.

Macfarlane, D. I.↗
NASA NTRS1982

Controlling Electron-Beam-Weld Focus

Control loop measures weld-spot temperature to regulate focus current. Square-wave generator modulates current in electron-beam focus coil so that focal point is varied between points slightly above and below surface of weld. Sensor detects intensity of light emitted by weld, proportional to fourth power of temperature at hottest part of weld spot. Sensor signal is detected by chopper demodulator synchronized by square-wave generator, to determine whether average position of focal point is higher than, coincident with, or lower than optimum point; and focus coil current is adjusted accordingly.

Coate, F. M.↗
NASA NTRS1990

Standard-M mobile satellite terminal employing electronic beam squint tracking

In recent years, extensive experience has been built up at the University of Bristol in the use of the Electronic Beam Squint (EBS) tracking technique, applied to large earth station facilities. The current interest in land mobile satellite terminals, using small tracking antennas, has prompted the investigation of the applicability of the EBS technique to this environment. The development of an L-band mechanically steered vehicle antenna is presented. A description of the antenna is followed by a detailed investigation of the tracking environment and its implications on the error detection capability of the system. Finally, the overall hardware configuration is described along with plans for future work.

Hawkins, G. J.↗
NASA NTRS2021

A Heuristic Method for Determining the Necessary Time Duration of Electron Beam Tests ESD of Spacecraft Dielectrics

Electrostatic discharge or ESD can pose a significant risk to spacecraft in many space environments. Laboratory electron beam facilities can be used to test the performance of candidate spacecraft dielectrics. However, limited resources necessitate accelerated testing. The aim of this work is the development of a criterion for determining when an ESD test has run for sufficient time to capture representative ESD behavior. Such a criterion has the potential of saving hours of personnel and facility time per test. A comparison of the distributions of ESD event magnitudes from consecutive segments of an ESD test can be used to determine when the test has reached a quasi-steady state. Once this quasi-steady state has been observed the test may be truncated without a significant reduction in test fidelity.

Chinn, James↗
NASA NTRS1990

Artificial electron beams in the magnetosphere and ionosphere

The Plasma Diagnostics Payload of the Echo 7 satellite carried TV cameras and photometers by means of which the luminosity around an electron beam in the polar ionosphere could be studied. It was found that, while the beam Larmor spiral could be clearly seen near 100 km, above this only a column due to suprathermal electrons was observable. At high altitudes, the emission of neutral gas both generated powerful luminosity and substantially reduced accelerator potentials. An analysis of conjugate echoes indicates that inferred magnetospheric electric fields do not map well into the ionosphere, as well as the presence of strong pitch-angle scattering.

Winckler, John R.↗
NASA NTRS1981

Two-dimensiosnal electron beam charging model for polymer films

A two dimensional model was developed to describe the charging of thin polymer films exposed to a uniform mon-energetic electron beam. The study was motivated by observed anomalous behavior of geosynchronous satellites which was attributed to electrical discharges associated with the differential charging of satellite surfaces of magnetospheric electrons. Electric fields both internal and external to the irradiated specimen were calculated at steady state in order to identify regions of high electrical stress. Particular emphasis was placed on evaluating the charging characteristics near the material's edge. The model was used to identify and quantify the effects of some of the experimental parameters notably: beam energy; beam angle of incidence; beam current density; material thickness; and material width. Simulations of the following situations were also conducted: positive or negative precharging over part of the surface; a central gap in the material; and a discontinuity in the material's thickness.

Reeves, R. D.↗
DOE OSTI2026

Crystal Orientation and Defect Mapping in Electron-Beam-Sensitive Zeolites with Near-Axis Transmission Kikuchi Diffraction

Porous materials are vital in catalysis, energy conversion, and environmental remediation. Understanding structural heterogeneity in zeolites is key to linking synthesis, framework intergrowths, and catalytic performance, yet current methods for phase identification and spatial mapping lack sufficient resolution or throughput. We present a high-throughput approach using near-axis transmission Kikuchi diffraction in a scanning electron microscope, achieving high phase and spatial resolution for electron-beam-sensitive zeolites, including ZSM-5 and, for the first time, Zeolite A. Here, this method enables direct visualization of intergrowth features that critically affect catalytic and adsorption behavior, bridging the gap between ensemble-averaged X-ray diffraction and high-resolution but low-throughput transmission electron microscopy. Combining nanoscale mapping with statistical sampling is highly suited for machine-learning pipelines guiding new structure function understanding and could be extended to other beam-sensitive porous materials such as metal–organic or covalent–organic frameworks.

crystallography↗
NASA NTRS1976

Initiation with an electron beam of chemical reactions of interest for visible wavelength lasers

A description is given of the first results obtained with a new shock tube-electron beam facility designed to provide a versatile means for the systematic search for laser operation among several candidate metal atom-oxidizer systems. According to the current experimental approach, metal atoms are obtained in the vapor phase by the dissociation of metal compounds. A shock tube is employed to provide a short duration flow through an array of 29 supersonic flow-mixing nozzles. A high energy electron accelerator is used for the rapid initiation of chemical reaction in a mixed flow of encapsulated metal and oxidizer.

Whittier, J. S.↗
NASA NTRS1980

Electron beam charging and ARC discharging of spacecraft insulating materials

The properties of the arc discharges which are caused by the laboratory exposure of dielectric materials to electron beams are examined, the intent being to simulate conditions on synchronous-orbit spacecraft. Extensive experimental studies are reported for planar dielectrics (Teflon, Kapton, Mylar) on the subjects of incident-flux scaling of discharge properties and the effects of high-energy broad-spectrum electron irradiation from a radioisotpe source. In addition a preliminary evaluation is made of the discharge susceptibility of fiber optic waveguides.

Balmain, K. G.↗