Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “elastic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

High order ADER schemes for a unified first order hyperbolic formulation of continuum mechanics: Viscous heat-conducting fluids and elastic solids

Highlights: • High order schemes for a unified first order hyperbolic formulation of continuum mechanics. • The mathematical model applies simultaneously to fluid mechanics and solid mechanics. • Viscous fluids are treated in the frame of hyper-elasticity as generalized visco-plastic solids. • Formal asymptotic analysis reveals the connection with the Navier–Stokes equations. • The distortion tensor A in the model appears to be well-suited for flow visualization. - Abstract: This paper is concerned with the numerical solution of the unified first order hyperbolic formulation of continuum mechanics recently proposed by Peshkov and Romenski [110], further denoted as HPR model. In that framework, the viscous stresses are computed from the so-called distortion tensor A, which is one of the primary state variables in the proposed first order system. A very important key feature of the HPR model is its ability to describe at the same time the behavior of inviscid and viscous compressible Newtonian and non-Newtonian fluids with heat conduction, as well as the behavior of elastic and visco-plastic solids. Actually, the model treats viscous and inviscid fluids as generalized visco-plastic solids. This is achieved via a stiff source term that accounts for strain relaxation in the evolution equations of A. Also heat conduction is included via a first order hyperbolic system for the thermal impulse, from which the heat flux is computed. The governing PDE system is hyperbolic and fully consistent with the first and the second principle of thermodynamics. It is also fundamentally different from first order Maxwell–Cattaneo-type relaxation models based on extended irreversible thermodynamics. The HPR model represents therefore a novel and unified description of continuum mechanics, which applies at the same time to fluid mechanics and solid mechanics. In this paper, the direct connection between the HPR model and the classical hyperbolic–parabolic Navier–Stokes–Fourier theory is established for the first time via a formal asymptotic analysis in the stiff relaxation limit. From a numerical point of view, the governing partial differential equations are very challenging, since they form a large nonlinear hyperbolic PDE system that includes stiff source terms and non-conservative products. We apply the successful family of one-step ADER–WENO finite volume (FV) and ADER discontinuous Galerkin (DG) finite element schemes to the HPR model in the stiff relaxation limit, and compare the numerical results with exact or numerical reference solutions obtained for the Euler and Navier–Stokes equations. Numerical convergence results are also provided. To show the universality of the HPR model, the paper is rounded-off with an application to wave propagation in elastic solids, for which one only needs to switch off the strain relaxation source term in the governing PDE system. We provide various examples showing that for the purpose of flow visualization, the distortion tensor A seems to be particularly useful.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The exploration of nonlinear elasticity and its efficient parameterization for crystalline materials

Conventional approaches to analyzing the very large coherency strains that can occur during solid-state phase transformations are founded in linear elasticity and rely on infinitesimal strain metrics. Despite this, there are many technologically important examples where misfit strains of multi-phase mixtures are very large during their synthesis and/or application. Here in this paper, we present a framework for constructing strain-energy expressions and stress-strain relationships beyond the linear-elastic limit for crystalline solids. This approach utilizes group theoretical concepts to minimize both the number of free parameters in the strain-energy expression and amount of first-principles training data required to parameterize strain-energy models that are invariant to all crystal symmetries. Within this framework, the strain-energy and elastic stiffness can be described to high accuracy in terms of a set of conventional symmetry-adapted finite strain metrics that we define independent of crystal symmetry. As an illustration, we use first-principles electronic structure data to parameterize strain energy polynomials and employ them to explore the strain- energy surfaces of HCP Zr and Mg, as well as several important Zr-H and Mg-Nd phases that are known to precipitate coherently within the HCP matrices of Zr and Mg.

36 MATERIALS SCIENCE↗

Assessment of effective elastic constants of U-10Mo fuel: A multiscale modeling and homogenization study

The significant microstructural changes that U-Mo fuel undergoes during operation degrades its mechanical properties and structural integrity. Microstructural evolution entails the formation, evolution, and redistribution of porosity in conjunction with grain refinement. In the present paper, we employ numerical approaches to assess the impact of the various microstructural features—grains, nanoscale intragranular fission gas bubbles, and mesoscale intergranular voids—on the degradation of elastic constants. Phase-field microstructure models are combined with the asymptotic expansion homogenization technique in order to derive the effective elastic constants as a function of porosity and fission density. Here the results are verified and compared against theoretical bounds. Using this approach, elastic degradation in operating nuclear fuels can be quantified when the distributions of microstructural features are known.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Third-order elastic constants of diamond determined from experimental data

The pressure derivatives of the second-order elastic constants (SOECs) of diamond were determined by analyzing previous sound velocity measurements under hydrostatic stress [McSkimin and Andreatch, J. Appl. Phys. 43, 294 (1972)]. Furthermore, our analysis corrects an error in the previously reported results.We present a complete and corrected set of third-order elastic constants (TOECs) using the corrected pressure derivatives, together with published data for the nonlinear elastic response of shock compressed diamond [Lang and Gupta, Phys. Rev. Lett. 106, 125502 (2011)] and it differs significantly from TOECs published previously.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The characterization of shape memory effect for low elastic modulus biomedical {beta}-type titanium alloy

This work investigates the textures of biomedical TiNbTaZr alloy rolled by 99% cold reduction ratios in thickness. The relationship between textures and superelasticity of the specimens treated at 873 K and 1223 K for 1.2 ks is studied. The microstructure of tensile specimen is investigated by transmission electron microscopy. Textures of cold-rolled and heat-treated specimens are studied. During unloading, the anisotropy of superelastic strain and pure elastic strain in the heat-treated specimens is observed. Superelastic strain along rolling direction and transverse direction is larger than those along 45 deg. from rolling direction while pure elastic strain shows the highest value along 45 deg. from rolling direction in the specimen treated at 873 K. For the specimen treated at 1223 K, higher pure elastic strain is obtained along rolling direction. The maximum recovered strain around 2.11% is obtained along rolling direction.

36 MATERIALS SCIENCE↗

Modeling of the Effective Elastic and Thermal Properties of Glass-Ceramic Solid Oxide Fuel Cell Seal Materials

In this study, the effective elastic properties and coefficients of thermal expansion (CTE) of a glass-ceramic were predicted using homogenization techniques. Using G18, a glass-ceramic solid oxide fuel cell (SOFC) sealant as an initial reference material, the effectiveness of different homogenization models was investigated for a two-phase glass-ceramic. The elastic properties and CTEs of the G18 amorphous phase are currently unknown. Thus, estimated values were used as an input to the models. The predictive model offers accurate macroscopic values on both the elastic modulus and the CTE of glass-ceramic materials, providing the estimated amorphous values are reasonable. This model can be used in designing glass-ceramic SOFC seal materials for its specific operation conditions.

30 DIRECT ENERGY CONVERSION↗

Studies on phase formation, microstructure development and elastic properties of reduced NiO-8YSZ anode supported bi-layer half-cell structures of solid oxide fuel cells

Highlights: Black-Right-Pointing-Pointer Detailed study on the development of microstructure and phase in NiO-8YSZ anodes. Black-Right-Pointing-Pointer Detailed study on elastic properties at high temperatures in air/reducing atmosphere. Black-Right-Pointing-Pointer Effects of initial porosity, composition and other issues are evaluated in detail. -- Abstract: Half-cell structures of solid oxide fuel cells (SOFCs) with a thin and dense electrolyte layer of 8YSZ supported by a thick and porous NiO-8YSZ anode precursor structure were reduced in a gas mixture of 5% H{sub 2}-95% Ar at 800 Degree-Sign C for selected time periods in order to fabricate cermets with desired microstructure and composition, and to study their effects on the elastic properties at ambient and reactive atmospheres. It appears that 2 h of exposure to the reducing conditions is enough to reduce {approx}80% of NiO with an enhanced porosity value of 35%. The Ni-8YSZ cermet phase formation in the anode was analyzed with X-ray diffraction (XRD) in correlation with its microstructure. The elastic properties were determined after the reduction, at room and elevated temperatures using the impulse excitation technique. At room temperature the decrease in the Young's modulus was about 44% (after 8 h of reduction) and can be attributed mainly to the changes in the microstructure, particularly the increase in porosity from {approx}12% to 37%. Young's moduli of the as-received precursor and reduced anodes were evaluated as a function of temperature in air and reducing atmosphere. The results were explained in correlation to the initial porosity, composition and oxidation of Ni at the elevated temperatures.

36 MATERIALS SCIENCE↗

Novel elastic deformation mechanism in multifunctional Ti–Nb alloy

In-situ high-energy X-ray diffraction was used to reveal a novel elastic deformation mechanism of the polycrystalline Ti-24Nb-4Zr-8Sn alloy under uniaxial compression. These experiments of polycrystal provide direct evidence on anomalous change in full widths at half maximum for {110} β peak during elastic deformation, i.e. peak broadening during unloading and peak narrowing upon loading, which is attributed to the formation of stress-induced irreversible ω phase as clearly demonstrated in single crystal during compression. Difference in modulus between omega and beta phases induces different change in lattice strain causing the broadening and narrowing of diffraction peak near {110} β where actually contains $\{\bar{1120}\}_{\omega}$ under different applied stress. Finally, this study offers new perspectives to investigate intrinsic mechanism on specific phase transformation during elastic deformation.

36 MATERIALS SCIENCE↗

High-temperature dependency of elastic mechanical behavior of two wrought magnesium alloys AZ31B and ZK60A studied by resonant ultrasound spectroscopy

Resonant ultrasound spectroscopy (RUS) was used to study the elastic mechanical properties and internal friction of two wrought magnesium alloys, AZ31B and ZK60, from 25°C to 450°C. Samples in the rolled, transverse and normal directions were characterized at 50°C intervals to determine the temperature dependency of elastic moduli and stiffnesses for each direction. The temperature dependencies represented as, d E /d T , dG/d T , d B /d T , d C 11 /d T , d C 12 /d T , and d C 44 /d T are provided herein. To evaluate the RUS technique for this type of alloys, Young’s modulus was also determined by conventional static tension testing and the results were compared. From the same RUS experiment, the internal friction variation with temperature was calculated for both alloys. The coefficient of thermal expansion for each direction over the temperature range considered were determined, as they were needed to simulate the RUS spectra. This study shows that RUS can be a convenient and accurate technique to supply quantitative elastic mechanical data and fill the existing gaps on light metals characterization.

36 MATERIALS SCIENCE↗

Neutron elastic and inelastic scattering differential cross sections on carbon

Elastic and inelastic neutron scattering angular distributions were measured on natural carbon samples to confirm existing experimental data and evaluations in the fast neutron region and to guide improvements in resonance parameters, where needed. Sixty-four (n,n') differential cross section measurements were performed at 45 incident neutron energies between 0.5 and 8.0 MeV. Experimental angle-integrated elastic scattering cross sections are consistent with ENDF/B-VIII.0 values with the exception of the region from 3.2 to 4.0 MeV where our results are ~3% higher. In the 3.4 to 3.6 MeV region our differential cross sections are slightly lower at forward angles and somewhat higher at backward angles than the ENDF/B-VIII.0 calculations; however, our results are consistent with measured data from other research groups. The first- through fourth-order elastic scattering Legendre coefficients from fits to these experimental data are consistent with ENDF/B-VIII.0 values across this range of incident neutron energies. Inelastic scattering cross sections were measured at 12 incident neutron energies between 5.6 and 7.8 MeV. Angle-integrated cross sections agree well with the 1978 Perey and ENDF/B-VIII.0 values; however, the angular-distribution shapes deviate somewhat from the ENDF/B-VIII.0 calculations. These data will allow refinement of the resonance parameter description in this difficult energy region.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Single-Crystal Elasticity of Diaspore, A1OOH, to 12 GPa by Brillouin Scattering

The high-pressure elasticity of diaspore (AlOOH) has been determined by Brillouin spectroscopy to 12 GPa in diamond anvil cells. Experiments were carried out using a 16:3:1 methanol-ethanol-water mixture as pressure medium, and ruby as pressure standard. Acoustic velocities were measured in three roughly orthogonal planes at ambient and eight elevated pressures. The nine individual elastic stiffness constants of the orthorhombic crystal were obtained by fitting the velocity data to Christoffel's equation. Aggregate elastic moduli and pressure derivatives were calculated from the Cijs by fits to Eulerian finite strain equations, yielding: KS0=152(1) GPa, G0 = 117.2(5) GPa, (?KS/?P)T0=3.7(1), (?G/?P)0=1.5(1) for the Voigt-Reuss-Hill average. All individual Cijs increase with pressure but C23 and C55 exhibit anomalously low pressure derivatives. From calculated linear compressibilities, the a-axis is the most compressible. The b-axis becomes the least compressible axis at high pressures. Over the examined pressure range, the azimuthal P-wave anisotropy decreased from 22% to 16%, while the azimuthal S-wave anisotropy increased from 15% to 21%. Both volume and axial compression curves calculated using our Brillouin results are in good agreement with the results from static compression studies. High-pressure sound velocities in diaspore exceed those of other hydrous minerals as well as many anhydrous phases relevant to Earth's upper mantle.

79 ASTRONOMY AND ASTROPHYSICS↗

Pressure and Temperature Dependence of the Elasticity of Pyrope-Majorite [Py60Mj40 and Py50Mj50] Garnets Solid Solution Measured by Ultrasonic Interferometry Technique

Compressional (P) and shear (S) wave velocities have been measured for two synthetic polycrystalline specimens of pyrope-majorite garnets [Py60Mj40 and Py50Mj50] by ultrasonic interferometry to 8 GPa and 1000 K, in a DIA-type cubic anvil high pressure apparatus (SAM-85) interfaced with synchrotron X-radiation and X-ray imaging. Elastic bulk (KS) and shear (G) moduli data obtained at the end of the cooling cycles were fitted to functions of Eulerian strain to third order yielding pressure derivatives of the elastic moduli (?KS/?P)T = 4.3 (3); (?G/?P)T = 1.5 (1) for Py60Mj40 garnet and (?KS/?P)T = 4.4 (1); (?G/?P)T = 1.3 (1) for Py50Mj40 garnet. Both (?KS/?P)T and (?G/?P)T are identical for the two garnet compositions and are also consistent with Brillouin scattering data for polycrystalline Py50Mj50. Moreover, the new pressure derivatives of the elastic moduli are equal within experimental uncertainties to those of end-member pyrope garnet from ultrasonic studies.

43 PARTICLE ACCELERATORS↗

Elasticity of Stishovite and Acoustic Mode Softening Under High Pressure by Brillouin Scattering

Brillouin scattering measurements on single-crystal stishovite, a high-pressure polymorph of SiO2, were carried out to 22 GPa. Acoustic velocities in three 30-em thick crystal platelets of synthetic stishovite were measured in a forward symmetric scattering geometry, and the full set of elastic constants were retrieved to 12 GPa. The measured velocity data were fit to Christoffel's equation, yielding ambient-pressure elastic constants of C11 = 455(1) GPa, C33 = 762(2) GPa, C12 = 199(2) GPa, C13 = 192(2) GPa, C44 = 258(1) GPa, and C66 = 321(1) GPa. The elastic modulus (C11 - C12)/2 was observed to decrease with pressure, indicating acoustic mode softening, consistent with theoretical predications for the behavior of stishovite as it approaches the transition to the CaCl2-type phase. The bounds on the aggregate adiabatic bulk and shear moduli are KS0 = 315(1) GPa, G0 = 240(1) GPa for the Voigt bound, KS0 = 301(1) GPa, G0 = 216(1) GPa for the Reuss bound. Pressure derivatives of aggregate bulk and shear moduli were constrained to be (?KS/?P)T0 = 4.34(16) and (?G/?P)0 = 0.7(1) for the Reuss bound, and (?KS/?P)T0 = 4.0(1) and (?G/?P)0 = 1.1(1) for the Voigt-Reuss-Hill (VRH) average, respectively, by fitting the data to Eulerian finite strain equations. The volume compression curve obtained from our Brillouin measurement is in very good agreement with previous compression studies up to 50 GPa.

36 MATERIALS SCIENCE↗

Elastic anisotropy of ferromagnesian post-perovskite in Earth's D" layer

We report experimental observation of a sizable elastic anisotropy in a polycrystalline sample of ferromagnesian silicate in post-perovskite (ppv) structure. Using a novel composite X-ray transparent gasket to contain and synthesize ppv in a panoramic diamond-anvil cell along with oblique X-ray diffraction geometry, we observed the anisotropic lattice strain and {l_brace}1 0 0{r_brace} or {l_brace}1 1 0{r_brace} slip-plane texture in the sample at 140 GPa. We deduced the elasticity tensor (c{sub ij}), orientation-dependent compressional wave velocities, polarization-dependent shear-wave velocities, and the velocity anisotropy of the silicate ppv. Our results are consistent with calculations and indicate that with sufficient preferred orientation, the elastic anisotropy of this phase can produce large shear-wave splitting.

36 MATERIALS SCIENCE↗

Elasticity of Hydrous Wadsleyite to 12 GPa: Implications for Earth's Transition Zone

Knowledge of the pressure effect on elasticity of hydrous olivine polymorphs is necessary to model seismic wave speeds for potential hydrous regions of the mantle. Here we report single-crystal elastic properties of wadsleyite, {beta}-Mg2SiO4, with 0.84 wt.% H2O measured to 12 GPa by Brillouin scattering. Pressure derivatives of the aggregate bulk modulus, K{prime} S0, and shear modulus, G{prime}0, of hydrous wadsleyite are 4.1(1) and 1.4(1) respectively. These values are indistinguishable within uncertainty from those of anhydrous wadsleyite. We estimate that {approx}1 wt.% H2O in wadsleyite at 410-km depth can reconcile seismic bulk sound velocities with a pyrolite-composition mantle by using our measured high-pressure elastic constants. If the H2O content of the mantle is much less than 1 wt.%, then other factors need to be considered to explain the velocity contrast of the 410-km discontinuity. Variations in water content with depth may also contribute to the anomalously steep seismic velocity gradient in the mantle transition zone.

58 GEOSCIENCES↗

Laminin and biomimetic extracellular elasticity enhance functional differentiation in mammary epithelia

In the mammary gland, epithelial cells are embedded in a 'soft' environment and become functionally differentiated in culture when exposed to a laminin-rich extracellular matrix gel. Here, we define the processes by which mammary epithelial cells integrate biochemical and mechanical extracellular cues to maintain their differentiated phenotype. We used single cells cultured on top of gels in conditions permissive for {beta}-casein expression using atomic force microscopy to measure the elasticity of the cells and their underlying substrata. We found that maintenance of {beta}-casein expression required both laminin signalling and a 'soft' extracellular matrix, as is the case in normal tissues in vivo, and biomimetic intracellular elasticity, as is the case in primary mammary epithelial organoids. Conversely, two hallmarks of breast cancer development, stiffening of the extracellular matrix and loss of laminin signalling, led to the loss of {beta}-casein expression and non-biomimetic intracellular elasticity. Our data indicate that tissue-specific gene expression is controlled by both the tissues unique biochemical milieu and mechanical properties, processes involved in maintenance of tissue integrity and protection against tumorigenesis.

59 BASIC BIOLOGICAL SCIENCES↗

Temperature-dependent elastic anisotropy and mesoscale deformation in a nanostructured ferritic alloy

Nanostructured ferritic alloys (NFA) are a new class of ultrafine-grained oxide dispersion-strengthened steels, promising for service in extreme environments of high temperature and high irradiation in the next-generation of nuclear reactors. This is owing to the remarkable stability of their complex microstructures containing a high density of Y-Ti-O nanoclusters within grains and along the grain boundaries. While nanoclusters have been recognized to be the primary contributor to the exceptional resistance to irradiation and high-temperature creep, very little is known about the mechanical roles of the polycrystalline grains that constitute the bulk ferritic matrix. Here we report the mesoscale characterization of anisotropic responses of the ultrafine NFA grains to tensile stresses at various temperatures using the state-of-the-art in situ neutron diffraction. We show the first experimental determination of temperature-dependent single-crystal elastic constants for the NFA, and reveal a strong temperature-dependent elastic anisotropy due to a sharp decrease in the shear stiffness constant [c'=(c_11-c_12)/2] when a critical temperature ( T_c ) is approached, indicative of elastic softening and instability of the ferritic matrix. We also show, from anisotropy-induced intergranular strain/stress accumulations, that a common dislocation slip mechanism operates at the onset of yielding for low temperatures, while there is a deformation crossover from low-temperature lattice hardening to high temperature lattice softening in response to extensive plastic deformation.

36 MATERIALS SCIENCE↗

Pressure induced elastic softening in framework aluminosilicate- albite (NaAlSi 3 O 8 )

Albite (NaAlSi 3 O 8 ) is an aluminosilicate mineral. Its crystal structure consists of 3-D framework of Al and Si tetrahedral units. We have used Density Functional Theory to investigate the high-pressure behavior of the crystal structure and how it affects the elasticity of albite. Our results indicate elastic softening between 6–8 GPa. This is observed in all the individual elastic stiffness components. Our analysis indicates that the softening is due to the response of the three-dimensional tetrahedral framework, in particular by the pressure dependent changes in the tetrahedral tilts. At pressure <6 GPa, the PAW-GGA can be described by a Birch-Murnaghan equation of state with V GGA 0 = 687.4Å 3 , K GGA 0 = 51.7 GPa, and G GGA 0 = 4.7. The shear modulus and its pressure derivative are K ⊕GGA 0 = 33.7 GPa, and G ⊕GGA 0 = 2.9. At 1 bar, the azimuthal compressional and shear wave anisotropy AV GGA P = 42.8%, and AV GGA S = 50.1%. We also investigate the densification of albite to a mixture of jadeite and quartz. The transformation is likely to cause a discontinuity in density, compressional, and shear wave velocity across the crust and mantle. Furthermore, this could partially account for the Mohorovicic discontinuity in thickened continental crustal regions.

58 GEOSCIENCES↗