Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “drawing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Application of petrographic examination techniques to the assessment of fire-damaged concrete and masonry structures

The number of building fires has doubled over the last 50 years. There has never been a greater need for structures to be assessed for fire damage to ensure safety and enable appropriate repairs to be planned. Fortunately, even after a severe fire, concrete and masonry structures are generally capable of being repaired rather than demolished. By allowing direct examination of microcracking and mineralogical changes, petrographic examination has become widely used to determine the depth of fire damage for reinforced concrete elements. Petrographic examination can also be applied to fire-damaged masonry structures built of materials such as stone, brick and mortar. Petrography can ensure accurate detection of damaged geomaterials, which provides cost savings during building repair and increased safety reassurance. This paper comprises a review of the role of petrography in fire damage assessments, drawing on a range of actual fire damage investigations.

36 MATERIALS SCIENCE↗

Dependence of texture evolution on initial orientation in drawn single crystal copper

The evolution of fiber texture in the drawn single crystal copper wires with initial orientations of < 100>, < 110> and < 111> parallel to axis direction has been studied via electron backscattering diffraction. During cold drawing process, grain subdivision takes place in the < 100>, < 110> and < 111> single crystals. At high strains, a mixture of < 111> and < 100> fiber textures forms, but due to uneven shear strain, the distribution of the < 111> and < 100> fiber textures is inhomogeneous along the radial direction of wires. The < 111> fiber texture component is located in the centre of wires and < 100> is near the surface. Although grain subdivision appears in the < 100>, < 110> and < 111> single crystals, the stability of the three initial orientations is different. The initial orientations of < 100> and < 111> are more stable than < 110>. < 100> is stable at low strains while < 111> becomes stable at high strains. - Research Highlights: {yields} In drawn < 111> and < 100> single crystals, grain subdivision still takes place. {yields} The initial orientations of < 111> and < 100> more stable than < 110>. {yields} < 100> fiber texture located near the surface and < 111> in the centre. {yields} < 100> is stable at low strains but < 111> becomes stable at high strains.

36 MATERIALS SCIENCE↗

Microstructure evolution in TRIP-aided seamless steel tube during T-shape hydroforming process

Transformation-induced plasticity aided seamless steel tube comprising of ferrite, bainite, and metastable austenite was processed through forging, piercing, cold-drawing, and two-stage heat treatment. T-shape hydroforming is a classic forming method for experimental research and practical production. The current work studied austenite-to-martensite transformation and microcrack initiation and propagation of the tube during T-shape hydroforming using electron backscattering diffraction, scanning electron microscopy, and transmission electron microscopy. The strain distribution in the bcc-phase and fcc-phase was studied by evaluating changes in the average local misorientation. Compared to the compressive stress, metastable austenite with similar strain surrounding or inside the grains transformed easier under tensile loading conditions. The inclusions were responsible for microcrack initiation. The propagation of the cracks is hindered by martensite/austenite constituent due to transformation induced plasticity effect. The volume fraction of untransformed retained austenite decreased with increase in strain implying transformation-induced plasticity effect. - Highlights: • Hydroformed tubes processed via TRIP concept • EBSD provided estimate of micro local strain. • Retained austenite hinders propagation of microcracks.

36 MATERIALS SCIENCE↗

Rapid preparation of TiO2-SiO2 heterostructure photonic crystal in the near-infrared region via a modified electrophoresis-assisted self-assembly process

Highlights: • TiO{sub 2}-SiO{sub 2} heterostructure photonic crystal was rapidly fabricated. • The voltage played an important role in the electrophoresis-assisted self-assembly. • The photonic band gap of photonic crystal was in the near-infrared region. • The drawing process can accelerate the speed of self-assembling. - Abstract: TiO{sub 2}-SiO{sub 2} heterostructure photonic crystal was rapidly fabricated by a modified electrophoresis-assisted self-assembly process. The effect of voltage on preparation and properties of TiO{sub 2}-SiO{sub 2} heterostructure photonic crystal was discussed. The results of the tests show that TiO{sub 2}-SiO{sub 2} heterostructure photonic crystal with different structures can be rapidly fabricated by controlling the voltage. With the increase of voltage, the TiO{sub 2}-SiO{sub 2} heterostructure photonic crystal is more likely to form an ordered hexagonal array and shows a more bright and uniform color. Meanwhile, the central wavelength of the photonic band gap will be blue shifted in the near-infrared region.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Silicon nanoparticle-functionalized fiberglass pads for sampling

We used wet treatment to immobilize luminescent silicon nanoparticles on industrial glass fibers to impart optical and chemical functions to the fiber. Carpets or pads consisting of thousands of fibers are processed in parallel, enhancing the sensitivity of detection and the sampled volume. Treated pads exhibit strong luminescence, characteristic of the luminescence of the particles; showing no shift, broadening, or reduction of quantum efficiency. We demonstrate that drawing material by the pad due to physical adsorption can be reversed. We also demonstrate that allylamine can be covalently attached by photoinduced irradiation reactions, which results in imprinting the amine emission spectrum, providing spectral recognition. The imprint accompanied with a blue-shifting of the luminescence spectrum of the probe, allowing examination of the effect of termination on the nanoparticle structure. The shift is found to be consistent with an increase in the bandgap of the Si nanoparticle and is consistent with Quantum Monte Carlo calculations. In addition to sampling, the nano probe pad has the potential to enable a variety of biomedical applications through subsequent attachment.

36 MATERIALS SCIENCE↗

Use of a hyperelastic constitutive law for dry woven forming simulations

The increasing use of composite materials in industry implies an increasing use of automatic processes between which LCM processes take a large place. The improvement of such processes needs an extensive use of numerical simulations for all the stages of the process. In particular, it is necessary to know how the dry reinforcement is shaped. This paper presents a hyperelastic constitutive model for textile composite reinforcement at large strain based on an additive potential representative to tension and in-plane shearing. The proposed potential is a function of the right Cauchy Green and structural tensor invariants whose choice corresponds to textile composite reinforcement mechanical behaviour. The model is implemented in a user subroutine of ABAQUS/Explicit. The accuracy of the model has been checked and some simulations are performed on deep drawing with hemispheric punch. A good agreement is obtained with experimental forming experiments.

36 MATERIALS SCIENCE↗

Identification of an advanced constitutive model of Magnesium alloy AZ31B

The main aim of this paper is to study the flow behavior of the AZ31B magnesium alloy by means of tensile tests performed in extended ranges of temperature and strain rates. The flow stress-strain curves analyzed by power law type constitutive equation can only fit well with experimental curves at the work-hardening stage. A new mathematical model is studied to describe the softening behavior of material based on tensile experiments. The relative parameters are obtained by fitting the equation with the experimental data. The genetic algorithm has been used to obtain the global optimal fitting parameters. The comparison between the fitted and experimental data proves the effectiveness of the model. The results indicate that this model leads to a better simulation of the flow stress during the softening stage than that of the power law equation. Based on this model, the deep drawing process has been simulated with the commercial finite element code FORGE registered. The punch load and thickness distribution of AZ31 sheet have been studied. The study of the results is helpful to the application of the stamping technology for the magnesium alloy sheet.

36 MATERIALS SCIENCE↗

Maximum entropy models of ecosystem functioning

Using organism-level traits to deduce community-level relationships is a fundamental problem in theoretical ecology. This problem parallels the physical one of using particle properties to deduce macroscopic thermodynamic laws, which was successfully achieved with the development of statistical physics. Drawing on this parallel, theoretical ecologists from Lotka onwards have attempted to construct statistical mechanistic theories of ecosystem functioning. Jaynes’ broader interpretation of statistical mechanics, which hinges on the entropy maximisation algorithm (MaxEnt), is of central importance here because the classical foundations of statistical physics do not have clear ecological analogues (e.g. phase space, dynamical invariants). However, models based on the information theoretic interpretation of MaxEnt are difficult to interpret ecologically. Here I give a broad discussion of statistical mechanical models of ecosystem functioning and the application of MaxEnt in these models. Emphasising the sample frequency interpretation of MaxEnt, I show that MaxEnt can be used to construct models of ecosystem functioning which are statistical mechanical in the traditional sense using a savanna plant ecology model as an example.

54 ENVIRONMENTAL SCIENCES↗

Online technique for detecting state of onboard fiber optic gyroscope

Although angle random walk (ARW) of fiber optic gyroscope (FOG) has been well modeled and identified before being integrated into the high-accuracy attitude control system of satellite, aging and unexpected failures can affect the performance of FOG after launch, resulting in the variation of ARW coefficient. Therefore, the ARW coefficient can be regarded as an indicator of “state of health” for FOG diagnosis in some sense. The Allan variance method can be used to estimate ARW coefficient of FOG, however, it requires a large amount of data to be stored. Moreover, the procedure of drawing slope lines for estimation is painful. To overcome the barriers, a weighted state-space model that directly models the ARW to obtain a nonlinear state-space model was established for FOG. Then, a neural extended-Kalman filter algorithm was implemented to estimate and track the variation of ARW in real time. The results of experiment show that the proposed approach is valid to detect the state of FOG. Moreover, the proposed technique effectively avoids the storage of data.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Fabrication and characterization of 6,13-bis(triisopropylsilylethynyl)-pentacene active semiconductor thin films prepared by flow-coating method

Investigation on the physical characterization and comparison of organic thin film based on a soluble 6,13-bis(triisopropylsilylethynyl) (TIPS) pentacene is reported. Oriented thin-films of pentacene have been successfully deposited by flow-coating method, in which the chloroform solution is sandwiched between a transparent substrate and a slide glass, followed by slow-drawing of the substrate with respect to the slide glass. Molecular orientation of flow-coated TIPS-pentacene is comparable to that of the thermal-evaporated pentacene thin film by the X-ray diffraction (XRD) results. XRD results showed that the morphology of flow-coated soluble pentacene is similar to that of the thermal-evaporated pentacene thin films in series of (00l) diffraction peaks where the (001) diffraction peaks are strongest in the nominally out-of-plane intensity and interplanar spacing located at approximately 2θ = 5.33° (d-spacing, d{sub 001} = 16 Å). Following that, ITO/p-TIPS-pentacene/n-ZnO/Au vertical diode was fabricated. The diode exhibited almost linear characteristics at low voltage with nonlinear characteristics at higher voltage which similar to a pn junction behavior. The results indicated that the TIPS-pentacene semiconductor active thin films can be used as a hole injection layer for fabrication of a vertical organic transistor.

36 MATERIALS SCIENCE↗

Field electron emission from pencil-drawn cold cathodes

Field electron emitters with flat, curved, and linear profiles are fabricated on flexible copy papers by direct pencil-drawing method. This one-step method is free of many restricted conditions such as high-temperature, high vacuum, organic solvents, and multistep. The cold cathodes display good field emission performance and achieve high emission current density of 78 mA/cm{sup 2} at an electric field of 3.73 V/μm. The approach proposed here would bring a rapid, low-cost, and eco-friendly route to fabricate but not limited to flexible field emitter devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Depleted galaxy cores and dynamical black hole masses

Shallow cores in bright, massive galaxies are commonly thought to be the result of scouring of stars by mergers of binary supermassive black holes. Past investigations have suggested correlations between the central black hole mass and the stellar light or mass deficit in the core, using proxy measurements of M {sub BH} or stellar mass-to-light ratios (Y). Drawing on a wealth of dynamical models which provide both M {sub BH} and Y, we identify cores in 23 galaxies, of which 20 have direct, reliable measurements of M {sub BH} and dynamical stellar mass-to-light ratios (Y{sub *,dyn}). These cores are identified and measured using Core-Sérsic model fits to surface brightness profiles which extend out to large radii (typically more than the effective radius of the galaxy); for approximately one-fourth of the galaxies, the best fit includes an outer (Sérsic) envelope component. We find that the core radius is most strongly correlated with the black hole mass and that it correlates better with total galaxy luminosity than it does with velocity dispersion. The strong core-size-M {sub BH} correlation enables estimation of black hole masses (in core galaxies) with an accuracy comparable to the M {sub BH}-σ relation (rms scatter of 0.30 dex in log M {sub BH}), without the need for spectroscopy. The light and mass deficits correlate more strongly with galaxy velocity dispersion than they do with black hole mass. Stellar mass deficits span a range of 0.2-39 M {sub BH}, with almost all (87%) being <10 M {sub BH}; the median value is 2.2 M {sub BH}.

79 ASTRONOMY AND ASTROPHYSICS↗

THE FUELING DIAGRAM: LINKING GALAXY MOLECULAR-TO-ATOMIC GAS RATIOS TO INTERACTIONS AND ACCRETION

To assess how external factors such as local interactions and fresh gas accretion influence the global interstellar medium of galaxies, we analyze the relationship between recent enhancements of central star formation and total molecular-to-atomic (H{sub 2}/H I) gas ratios, using a broad sample of field galaxies spanning early-to-late type morphologies, stellar masses of 10{sup 7.2}-10{sup 11.2} M{sub Sun }, and diverse stages of evolution. We find that galaxies occupy several loci in a ''fueling diagram'' that plots H{sub 2}/H I ratio versus mass-corrected blue-centeredness, a metric tracing the degree to which galaxies have bluer centers than the average galaxy at their stellar mass. Spiral galaxies of all stellar masses show a positive correlation between H{sub 2}/H I ratio and mass-corrected blue-centeredness. When combined with previous results linking mass-corrected blue-centeredness to external perturbations, this correlation suggests a systematic link between local galaxy interactions and molecular gas inflow/replenishment. Intriguingly, E/S0 galaxies show a more complex picture: some follow the same correlation, some are quenched, and a distinct population of blue-sequence E/S0 galaxies (with masses below key scales associated with transitions in gas richness) defines a separate loop in the fueling diagram. This population appears to be composed of low-mass merger remnants currently in late- or post-starburst states, in which the burst first consumes the H{sub 2} while the galaxy center keeps getting bluer, then exhausts the H{sub 2}, at which point the burst population reddens as it ages. Multiple lines of evidence suggest connected evolutionary sequences in the fueling diagram. In particular, tracking total gas-to-stellar mass ratios within the fueling diagram provides evidence of fresh gas accretion onto low-mass E/S0s emerging from their central starburst episodes. Drawing on a comprehensive literature search, we suggest that virtually all galaxies follow the same evolutionary patterns found in our broad sample.

79 ASTRONOMY AND ASTROPHYSICS↗

Polarization diagnostics for cool core cluster emission lines

The nature of the interaction between low-excitation gas filaments at ∼10{sup 4} K, seen in optical line emission, and diffuse X-ray emitting coronal gas at ∼10{sup 7} K in the centers of galaxy clusters remains a puzzle. The presence of a strong, empirical correlation between the two gas phases is indicative of a fundamental relationship between them, though as yet of undetermined cause. The cooler filaments, originally thought to have condensed from the hot gas, could also arise from a merger or the disturbance of cool circumnuclear gas by nuclear activity. Here, we have searched for intrinsic line emission polarization in cool core galaxy clusters as a diagnostic of fundamental transport processes. Drawing on developments in solar astrophysics, direct energetic particle impact induced polarization holds the promise to definitively determine the role of collisional processes such as thermal conduction in the ISM physics of galaxy clusters, while providing insight into other highly anisotropic excitation mechanisms such as shocks, intense radiation fields, and suprathermal particles. Under certain physical conditions, theoretical calculations predict of the order of 10% polarization. Our observations of the filaments in four nearby cool core clusters place stringent upper limits (≲ 0.1%) on the presence of emission line polarization, requiring that if thermal conduction is operative, the thermal gradients are not in the saturated regime. This limit is consistent with theoretical models of the thermal structure of filament interfaces.

79 ASTRONOMY AND ASTROPHYSICS↗

HIGH-INCLINATION ATENS ARE INDEED RARE

A recent publication by the Near-Earth Object (NEOWISE) team (Mainzer et al.) using data from the Wide-field Infrared Survey Explorer compared the spacecraft's detected near-Earth asteroid subpopulation orbital element distributions to those expected from the Bottke et al. NEO orbital model. They found a discrepency between the detected and expected Aten inclination distribution. We show that the more recent NEO orbital distribution model by Greenstreet et al., when biased using the NEOWISE detection biases, gives a better match to the NEOWISE detections for the Aten (a < 1.0 AU, Q > 0.983 AU) population in semimajor axis (a), eccentricity (e), and inclination (i) than the Bottke et al. model. A Kolmogorov-Smirnov test gives the probability of drawing the NEOWISE detections from the biased Bottke et al. model as not rejectable (at >99% confidence) for the Aten semimajor axis distribution, but is rejectable at such a high level of confidence for the Aten eccentricity and inclination distributions. For all three orbital element distributions, the biased Greenstreet et al. model provides an acceptable match to the NEOWISE Aten detections. The deficiency in the previous model is likely due to the numerical integration's accuracy having broken down in the high-speed regime for planetary encounters near the Sun, an effect which the newer model does not suffer, and thus likely is the model of preference for perihelia q < 1.0 AU.

79 ASTRONOMY AND ASTROPHYSICS↗

Conformal algebra on Fock space and conjugate pairs of operators

Using the moment construction, we represent the generators of the conformal algebra as bilinear products of creation and annihiliation operators on the Fock space of the massless real scalar field in four dimensions. A complete set of one-particle eigenstates of the dilatation generator is given. Next, a complete set of one-particle eigenstates of the conformal generator is constructed in two distinct ways, once directly and once through an expansion in terms of dilatation eigenstates. The second approach uses an analytic continuation of the dilatation eigenvalue away from the real axis; the validity of the method is illustrated by the consistency with the first approach. Drawing upon this technique, we finally ponder the idea of building conjugates to the four components of the momentum operator by suitably modifying the action of the conformal generators on dilatation eigenstates. The construction of eigenstates of these new operators proceeds as for the conformal generator itself.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗