Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “coordination chemistry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Towards a generalized computational fluid dynamics technique for all Mach numbers

Currently there exists no single unified approach for efficiently and accurately solving computational fluid dynamics (CFD) problems across the Mach number regime, from truly low speed incompressible flows to hypersonic speeds. There are several CFD codes that have evolved into sophisticated prediction tools with a wide variety of features including multiblock capabilities, generalized chemistry and thermodynamics models among other features. However, as these codes evolve, the demand placed on the end user also increases simply because of the myriad of features that are incorporated into these codes. In order for a user to be able to solve a wide range of problems, several codes may be needed requiring the user to be familiar with the intricacies of each code and their rather complicated input files. Moreover, the cost of training users and maintaining several codes becomes prohibitive. The objective of the current work is to extend the compressible, characteristic-based, thermochemical nonequilibrium Navier-Stokes code GASP to very low speed flows and simultaneously improve convergence at all speeds. Before this work began, the practical speed range of GASP was Mach numbers on the order of 0.1 and higher. In addition, a number of new techniques have been developed for more accurate physical and numerical modeling. The primary focus has been on the development of optimal preconditioning techniques for the Euler and the Navier-Stokes equations with general finite-rate chemistry models and both equilibrium and nonequilibrium thermodynamics models. We began with the work of Van Leer, Lee, and Roe for inviscid, one-dimensional perfect gases and extended their approach to include three-dimensional reacting flows. The basic steps required to accomplish this task were a transformation to stream-aligned coordinates, the formulation of the preconditioning matrix, incorporation into both explicit and implicit temporal integration schemes, and modification of the numerical flux formulae. In addition, we improved the convergence rate of the implicit time integration schemes in GASP through the use of inner iteration strategies and the use of the GMRES (General Minimized Resisual) which belongs to the class of algorithms referred to as Krylov subspace iteration. Finally, we significantly improved the practical utility of GASP through the addition of mesh sequencing, a technique in which computations begin on a coarse grid and get interpolated onto successively finer grids. The fluid dynamic problems of interest to the propulsion community involve complex flow physics spanning different velocity regimes and possibly involving chemical reactions. This class of problems results in widely disparate time scales causing numerical stiffness. Even in the absence of chemical reactions, eigenvalue stiffness manifests itself at transonic and very low speed flows which can be quantified by the large condition number of the system and evidenced by slow convergence rates. This results in the need for thorough numerical analysis and subsequent implementation of sophisticated numerical techniques for these difficult yet practical problems. As a result of this work, we have been able to extend the range of applicability of compressible codes to very low speed inviscid flows (M = .001) and reacting flows.

Walters, R. W.↗
DOE OSTI2021

Precise Identification and Characterization of Catalytically Active Sites on the Surface of γ-Alumina

γ-alumina is one of the oldest and most important commercial catalytic materials with high surface area and stability. These attributes enabled its use as the first commercial large-scale heterogeneous catalyst for ethanol dehydration. Despite progress in materials characterization the nature of the specific sites on the surface of γ-alumina that are responsible for its unique catalytic properties has remained obscure and controversial. By using combined infrared spectroscopy, electron microscopy and solid-state nuclear magnetic resonance measurements we identify the octahedral, amphoteric (O) 5 Al(VI)-OH sites on the (100) segments of massively restructured (110) facets on typical rhombus-platelet γ-alumina as well as the (100) segments of irrational surfaces (invariably always present in all γ-alumina samples) responsible for its unique catalytic activity. Such (O) 5 Al(VI)-OH sites are also present on the macroscopically defined (100) facets of γ-alumina with elongated/rod-like geometry. The mechanism by which these sites lose -OH groups upon thermal dehydroxylation resulting in coordinatively unsaturated penta-coordinate Al +3 O 5 sites is clarified. These coordinatively unsaturated penta-coordinate Al sites produce well-defined thermally stable Al-carbonyl complexes. Overall, our findings contribute to the understanding of the nature of coordinatively unsaturated Al sites on the surface of γ-alumina and their role as catalytically active sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Metal–Organic Frameworks with Zero and Low–Valent Metal Nodes Connected by Tetratopic Phosphine Ligands

Metal–organic frameworks (MOFs) constructed with M 0 nodes are attractive targets due to the reactivity of these low-valent metals, but examples of these MOFs remain exceedingly rare. The rational design of three-dimensional MOFs with Pd 0 and Pt 0 nodes using tetratopic phosphine ligands is reported. Five new MOFs have been synthesized by systematic variation of the phosphine ligands and metal precursors employed, and these represent the first examples of MOFs constructed using phosphine–metal bonds as the sole structural component. Furthermore, the MOFs display solid-state luminescence, with emission maxima that are significantly red-shifted compared to Pd(PPh 3 ) 4 . In addition, a Rh I low-valent coordination solid based on the same linker design is reported, which displays solid-state luminescence that is not observed for the molecular analogue.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Manganese(II) complexes of 1,1'-bis[(pyridin-2-yl)methyl)]-2,2'-bipiperidine (PYBP): Synthesis, structure, catalytic properties in alkene epoxidation with hydrogen peroxide, and related mechanistic studies

In this study, several manganese(II) complexes with the stereoisomers of ligand PYBP (1,1'-bis[(pyridin-2-yl)methyl]-2,2'-bipiperidine) and different anions were prepared and characterized by X-ray diffractometry. Complex [Mn II (rac-PYBP)] 2+ (1) was found to be an efficient catalyst of alkene epoxidation by hydrogen peroxide in the presence of acetic acid in acetonitrile at room temperature. Cyclooctene was converted to its epoxide with up to 91 % yield, 99.6 % selectivity, and the turnover number of 180 within 5 min. Fast epoxidations of cyclohexene, 1-decene, styrene, and cis-stilbene were also achieved. Isomeric complex [Mn II (meso-PYBP)] 2+ (2) was catalytically inactive under the same experimental conditions. Stopped-flow spectrophotometry and freeze-quenched EPR spectra show that complex 2 is not oxidized by H 2 O 2 in the presence of acetic acid (AcOH) but instead undergoes partial ligand protonation and liberation of the Mn 2+ cations due to the relatively poor chelating ability of ligand meso-PYBP. The rac-PYBP isomer acts as a better ligand and retains the coordinated Mn center when complex 1 is treated with the H 2 O 2 /AcOH mixture in acetonitrile solution yielding a mixture of intensely colored intermediates likely involving Mn III , Mn IV , and Mn V complexes. Magnetic susceptibility measurements, UV–vis and EPR spectra suggest that dinuclear complexes [Mn III 2 (μ-O)(μ-OAc)(rac-PYBP) 2 ] 3+ and [Mn III Mn IV (μ-O) 2 (rac-PYBP) 2 ] 3+ gradually accumulate in the reaction mixture as inactivated states of the catalyst. Complex 1 also causes fast decomposition of hydrogen peroxide into O 2 gas and H 2 O, which competes with the epoxidation of alkenes and requires gradual addition of H 2 O 2 for its efficient use. The catalytic activity of complex 1 is strongly influenced by its counterions and decreases in order ClO 4 - ≈ SbF 6 - > NO 3 – > Cl - indicating that labile ligands in the coordination sphere of Mn are required for the activation of H 2 O 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Regioselective Hydrosilylation Catalysis with Supported Well-Defined Pt(0) Complexes: Effects of Surface Anions and Phosphenium Ligands

Achieving stable, selective single-atom catalysts is challenging because localsurface-site structures are difficult to control. Surface organometallic chemistry and organic−inorganic hybrid materials offer partial solutions, but applications to supporting zero-valent metals are limited. We demonstrate that well-defined, ionically bound N-heterocyclic phosphenium ([NHP] + ) ligands can be generated on silylium-functionalized sulfated zirconia ([ i Pr 3 Si][SZO]). These surface-bound [NHP][SZO] ligands coordinate Pt(0) centers, forming [(NHP)Pt(0)L][SZO] precatalysts that are highly active for alkyne hydrosilylation. Systematic studies reveal that sterically bulky aromatic ligands enhance regioselectivity, achieving performances comparable to molecular Pt catalysts. Further, more-coordinating anions support more-regioselective precatalysts; therefore, SZO supports more-selective species than weaker-coordinating Al(OC(CF 3 ) 3 ) 3 - functionalized silica, a trend confirmed by molecular analogues. These results demonstrate that both the ligand and support control catalytic behavior and enable solid-state structure− activity relationships.

Catalysts↗
DOE OSTI2023

Conformational dynamicity in a copper( ii ) coordination complex

The geometries of copper coordination complexes are intricately related to their electron transfer capabilities, but the role of dynamics in these processes are not fully understood. We have previously reported CuCl(dpa OMe ), a complex exhibiting conformational fluxionality in its Cu I state and rigidity upon oxidation to Cu II . Here, we report the synthesis and characterization of [CuCl(dpa SMe )] +/0 , a complex exhibiting relative rigidity in its CuI state and structural dynamics upon oxidation to Cu II . The dynamics of [CuCl(dpa SMe )] + were characterized via X-ray diffraction, cyclic voltammetry, and EPR spectroscopy, where temperature-dependent interconversion between trigonal bipyramidal and square pyramidal geometries is observed. Coupling these solid and solution-state characterization data enabled assignment of the coordination geometries involved. As a result, factors impacting these dynamics and their potential implications for electron transfer are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Synthesis and structural characterization of a hydrated sodium–caesium tetracosatungstate(VI), Na 5 Cs 19 [W 24 O 84 ]·21H 2 O

Crystal formation of penta­sodium nona­deca­cesium tetra­cosa­tungstate(VI) heneikosahydrate, Na 5 Cs 19 [W 24 O 84 ]·21H 2 O, was successfully achieved by the conversion of [H 2 W 12 O 42 ] 10– through the addition of excess Cs + . The crystal structure comprising the toroidal isopolyoxidometalate is presented, as well as its Raman spectrum. Na 5 Cs 19 (H 2 O) 21 W 24 O 84 crystallizes in the rhombohedral space group R$\overline{3}$ with an obverse centering. The title compound represents the addition of a new member to the isopolytungstate family with mixed alkali counter-ions and contains rarely observed five-coordinate tungsten(VI) atoms in the [W 24 O 84 ] 24– anion (site symmetry C 3i ) arising from the conversion mediated by Cs + counter-ions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Influences of Alkali Metal Cation Interactions on N2 Coordination to Iron(I) Beta-Diketiminate Complexes in Electrolyte Solutions

N2 functionalization reactions often use stable, isolable N2-bound complexes and low temperatures or highly activated reagents. However, little work has focused on systems where N2 binds weakly, and the N2 binding equilibrium can be modulated. Here, we describe analysis of surprising trends in alkali metal cation solvation on the formation of an anionic iron(I) beta-diketiminate complex and the subsequent N2 binding equilibrium. Variable temperature UV-vis spectroscopy shows that increased ionic strength in the coordinating solvent tetrahydrofuran promotes N2 coordination. Additionally, less solvated alkali metal cations in noncoordinating 2-methyltetrahydrofuran (MeTHF) stabilize N2 coordination, likely through the formation of contact ion pairs in solution that have enhanced N2 binding. Ionic strength has little effect on the energetics of N2 coordination to these proposed contact ion pairs in MeTHF. When the electrochemical analysis is done at –78 °C, there is an irreversible reduction of iron(II) and an anodically shifted oxidation, which is attributed to the formation of the spectroscopically observed N2 complex. Finally, bulk electrolysis is used to verify the electrochemical formation of the N2-bound anionic iron(I) complex. These studies demonstrate a new strategy for promoting N2 coordination by changing solution properties, which is relevant to homogeneous electrochemical N2 reduction methods.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Towards a mechanistic understanding of the sol–gel syntheses of ternary carbides

Sol–gel chemistry, while being extremely established, is to this day not fully understood, and much of the underlying chemistry and mechanisms are yet to be unraveled. Here, in this work, we elaborate on the sol–gel chemistry of Cr 2 GaC, the first layered ternary carbide belonging to the MAX phase family to ever be synthesized using this wet chemical approach. Leveraging a variety of both in- and ex situ characterization techniques, including X-ray and neutron powder diffraction, X-ray absorption fine structure analyses, total scattering analyses, and differential scanning calorimetry coupled with mass spectrometry, in-depth analyses of the local structures and reaction pathways are elucidated. While the metals first form tetrahedrally and octahedrally coordinated oxidic structures, that subsequently grow and crystallize into oxides, the carbon source citric acid sits on a separate reaction pathway, that does not merge with the metals until the very end. In fact, after decomposing it remains nanostructured and disordered graphite until the temperature allows for the reduction of the metal oxides into the layered carbide. Based on this, we hypothesize that the method is mostly applicable to systems where the needed metals are reducible by graphite around the formation temperature of the target phase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Electrochemical and Chemical Reactivities of Titanium Oxide-Based Materials with a Chloroaluminate Ionic Liquid Electrolyte for Aluminum Batteries

Here, by selecting three different types of electrode materials, we intended to better understand the Al 3+ intercalation chemistry of titanium oxide-based frameworks with an acidic chloroaluminate electrolyte. In agreement with previous reports, we confirmed that the native interstitial sites of anatase TiO 2 are less prone to accommodate Al 3 + than Li + or Na + ions, while introducing cationic vacancies largely increases the electrochemical storage capacity. Upon the first cycle, the highest reversible capacity, up to 277 mAh/g, was obtained for a hydrated layered structure featuring cationic vacancies. Total scattering data showed that the insertion of Al 3+ ions induced a strong distortion of the framework. In addition, combined 27 Al MAS NMR and DFT calculations revealed that in oxy-hydroxylated vacant sites, the coordination mode of Al 3+ ions depends on the arrangement of anions around vacancies inducing the occurrence of 4-, 5-, and 6-fold coordination modes. Further cycling experiments revealed a progressive capacity fading for all electrode materials. Using cyclic voltammetry on the used electrolyte, we evidenced that a partial dissolution has occurred, which is more pronounced for the layered hydrate compound, and that solubilized species are electrochemically active, giving rise to specific signatures in both CVs and galvanostatic experiments. Raman spectroscopy enabled us to characterize these species, which are derived from the Ti-Cl system. The solubilized species, however, eventually precipitated, as shown by a purple deposit observed on the separator and tentatively assigned to TiCl 3 , known to be insoluble in this medium. By providing further information on the Al 3+ intercalation chemistry and a better understanding of the electrochemical and chemical reactivities of electrode materials, this work will enable progress to be made in the development of aluminum-ion batteries.

Al3+-ion insertion chemistry↗
DOE OSTI2020

Unprecedented lattice volume expansion on doping stereochemically active Pb 2+ into uniaxially strained structure of CaBa 1- x Pb x Zn 2 Ga 2 O 7

Lone pair cations like Pb 2+ are extensively utilized to modify and tune physical properties, such as nonlinear optical property and ferroelectricity, of some specific structures owing to their preference to adopt a local distorted coordination environment. Here we report that the incorporation of Pb 2+ into the polar “114”-type structure of CaBaZn 2 Ga 2 O 7 leads to an unexpected cell volume expansion of CaBa 1- x Pb x Zn 2 Ga 2 O 7 (0 ≤ x ≤ 1), which is a unique structural phenomenon in solid state chemistry. Structure refinements against neutron diffraction and total scattering data and theoretical calculations demonstrate that the unusual evolution of the unit cell for CaBa 1- x Pb x Zn 2 Ga 2 O 7 is due to the combination of the high stereochemical activity of Pb 2+ with the extremely strained [Zn 2 Ga 2 O 7 ] 4- framework along the c -axis. The unprecedented cell volume expansion of the CaBa 1- x Pb x Zn 2 Ga 2 O 7 solid solution in fact is a macroscopic performance of the release of uniaxial strain along c -axis when Ba 2+ is replaced with smaller Pb 2+ .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

The Li + CaF → Ca + LiF chemical reaction under cold conditions

The calcium monofluoride (CaF) molecule has emerged as a promising candidate for precision measurements, quantum simulation, and ultracold chemistry experiments. Inelastic and reactive collisions of laser cooled CaF molecules in optical tweezers have recently been reported and collisions of cold Li atoms with CaF are of current experimental interest. In this paper, we report ab initio electronic structure and full-dimensional quantum dynamical calculations of the Li + CaF → LiF + Ca chemical reaction. The electronic structure calculations are performed using the internally contracted multi-reference configuration-interaction method with Davidson correction (MRCI + Q). An analytic fit of the interaction energies is obtained using a many-body expansion method. Furthermore, a coupled-channel quantum reactive scattering approach implemented in hyperspherical coordinates is adopted for the scattering calculations under cold conditions. Results show that the Li + CaF reaction populates several low-lying vibrational levels and many rotational levels of the product LiF molecule and that the reaction is inefficient in the 1–100 mK regime allowing sympathetic cooling of CaF by collisions with cold Li atoms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1977

Computational models for the analysis of three-dimensional internal and exhaust plume flowfields

This paper describes computational procedures developed for the analysis of three-dimensional supersonic ducted flows and multinozzle exhaust plume flowfields. The models/codes embodying these procedures cater to a broad spectrum of geometric situations via the use of multiple reference plane grid networks in several coordinate systems. Shock capturing techniques are employed to trace the propagation and interaction of multiple shock surfaces while the plume interface, separating the exhaust and external flows, and the plume external shock are discretely analyzed. The computational grid within the reference planes follows the trace of streamlines to facilitate the incorporation of finite-rate chemistry and viscous computational capabilities. Exhaust gas properties consist of combustion products in chemical equilibrium. The computational accuracy of the models/codes is assessed via comparisons with exact solutions, results of other codes and experimental data. Results are presented for the flows in two-dimensional convergent and divergent ducts, expansive and compressive corner flows, flow in a rectangular nozzle and the plume flowfields for exhausts issuing out of single and multiple rectangular nozzles.

Dash, S. M.↗
NASA NTRS2003

The Study of Biomass Emissions for Defining Radiative Forcing of Climate

Accurate quantification of the amounts of trace gases and particulate matter emitted from vegetation fires and other sources of biomass burning (agricultural waste and biofuels) on a regional and global basis is required by a number of users, including scientists studying a wide range of atmospheric processes, national governments who are required to report greenhouse gas emissions, and those interested in quantifying the sources of air pollution that affect human health at regional scales. Over the past decade, improvements in the ability to detect and map fires using a number of different satellite systems have been achieved, largely through efforts coordinated through working groups organized by the IGBP Data and Information System and Global Observation of Forest Cover (GOFC) projects. In addition, significant advances and improvement in or understanding of the emissions factors for biomass burning in different biomes has resulted through efforts by the Biomass Burning Experiment (BIBEX) organized through the International Global Atmospheric Chemistry project. A number of satellite-based fire data products have been generated, and a number of new products will shortly be available. These new data products will provide the basis for estimating emissions from biomass burning on a global basis. However, a number of issues remain concerning the availability of other data sets needed to generate these estimates. Recognizing these issues, the GOFC-Fire Satellite Validation Workshop (held in Lisbon, Portugal on 9-11 July 2001), recommended that a workshop focusing on Improving Global Estimates of Atmospheric Emissions from Biomass Burning be organized. This workshop was held from 17- 19 July 2002 on the campus of the University of Maryland, College Park, Maryland. This workshop served as the annual meeting of the GOFC/GOLD-Fire Program. The overall goals of the meeting were to review the information products generated from satellite imagery and other sources that are currently available for developing emission estimates from biomass burning, evaluate areas where improved or additional products would be beneficial, and recommend products for use by the atmospheric science community.

Penner, Joyce↗
DOE OSTI2021

Integrated Fuel Cycle Materials and Chemistry Program (FY21 Plutonium Science Task Report)

Task 2 of the IFCMCP was designed to utilize vibrational spectroscopy, microscopy, X-ray diffraction, and calorimetry to explore the spectroscopic, structural, and chemical properties of plutonium compounds relevant to the nuclear fuel cycle. An important precursor to this work is production of fresh, high-quality plutonium samples. Given the health hazards and material accountability associated with plutonium, sample production is not trivial and production experiments require extensive planning and coordination by research and support staff. Further, because alpha-emissions from plutonium produce time- and dose dependent radiolysis resulting in structural defects, particularly in the presence of water, freshly prepared plutonium samples must be carefully packaged and analyzed with urgency following their production. In FY21, SRNL and UND engaged in numerous research studies involving production and subsequent characterization of plutonium dioxide, plutonium fluoride, plutonium oxalate, and plutonium nitrate. Specific efforts involving each of these compounds are described in detail in the body of this report.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗