Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “continuum modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Dynamic control of molecular transport MXene transistor membranes

Controlled spatial confinement and surface properties of lamellar 2D nanomaterial membranes could enhance many precision separation processes. Traditionally, researchers view channel dimensions, surface properties, and permeation rates of these membranes as intrinsic properties that cannot be modulated in operando. We report that gate voltage applied to the conducting laminar MXene membrane can modulate the permeation rate of ions and neutral solutes, as well as its effective size rejection. In operando wide-angle x-ray scattering measurements reveal that these changes are not driven by electrically induced variations in the d spacing of the MXene layers. Instead, experimental data and continuum electrokinetic modeling reveal that ion transport through the MXene channels is primarily affected by Donnan equilibrium at the membrane-solution interface. We also report a strong increase in the permeation rates through the membrane under a low-frequency ac voltage gating regime that we attribute to diffusioosmotic flow oscillations induced in the membrane. Overall, MXene “transistor” membranes provide a previously unidentified approach to dynamic control of molecular separations.

Pendse, Aaditya [Lawrence Livermore National Labor↗
DOE OSTI2023

Co-Design of Multijunction Photoelectrochemical Devices for Unassisted CO 2 Reduction to Multicarbon Products

Photoelectrochemical (PEC) CO 2 reduction (PEC CO 2 R) is a prospective approach for utilizing solar energy to synthesize a variety of carbon-containing chemicals and fuels, the most valuable of which are multicarbon (C 2+ ) products, such as ethylene and ethanol. While these products can be produced with high faradaic efficiency using Cu, this occurs over a relatively narrow potential range, which, in turn, imposes constraints on the design of a device for PEC CO 2 R. Herein, we used continuum-scale modeling to simulate the solar-to-C 2+ (STC 2+ ) efficiency of PEC CO 2 R devices fed with CO 2 -saturated, 0.1 M CsHCO 3 . We then explored how cell architecture and the use of single or dual photoelectrode(s) alters the optimal combination of photoelectrode bandgaps for high STC 2+ efficiency. Ultimately, this work provides guidance for the co-design of the device architecture and photoelectrode bandgaps required to achieve high STC 2+ efficiency. The insights gained are then used to identify systems that yield the highest amount of C 2+ products throughout the day and year.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Solid Electrolyte Interphase Formation at the Ionic Liquid Electrolyte—Lithium-Metal Interface Using an Ab Initio Molecular Dynamics Approach

An interfacial study is performed using ab initio molecular dynamics (AIMD) simulations to elucidate the electrochemical interfacial stability of an ionic liquid (IL) as component of an electrolyte in contact with a Li-metal anode when an additive, vinylene carbonate (VC), is added to the electrolyte. The IL electrolyte is composed of 1-butyl-1-methylpyrrolidinium bis(fluoro-sulfonyl)-imide (PYR14 + FSI − ) with lithium bis(trifluoromethane-sulfonyl)imide salt (Li + TFSI − ) in a 8:2 concentration ratio. Reactions observed at the interface electrolyte/Li-metal during the AIMD simulations are verified by electronic structure calculations using density functional theory calculations considering a continuum solvent model. We found that the addition of VC to the IL prevents further reduction of the counter-ion TFSI − and retards reduction of FSI − in comparison to the case when the additive VC is absent. The PYR14 + reduction is never observed with or without the additive. The 1st, 2nd, and 3rd electron affinities of the PYR14 + are −0.08, −0.36 and −3.65 eV, indicating little to large repulsive behavior against electrons. The opposite is observed for the two negative ions, FSI − and TFSI − , which yield 1st electron affinities of 1.73 and 1.83 eV, respectively. Reactions obtained under open circuit conditions. Dissociation mechanisms are presented for all IL components reduced at the IL/Li-metal interface.

Electrochemistry↗
DOE OSTI2024

Communication—First-Principles Simulations of LiPF 6 Decomposition in Ethylene Carbonate-Based Electrolytes

We revisit a theoretical result by Okamoto (2013 Journal of The Electrochemical Society , 160 , A404) who calculated the energy barrier for the decomposition of lithium hexafluorophosphate (LiPF 6 ) into LiF + PF 5 when solvated in Ethylene carbonate (EC)-based electrolyte. Using different numerical techniques to discretize the Density Functional Theory (DFT) equations, and different continuum solvation models with the same dielectric constant, our results largely confirm the original calculation. However, simulations with a higher dielectric permittivity value, closer to that of EC, show a lower energy barrier. More importantly, First-Principles simulations with an explicit solvent show a substantially lower energy barrier.

25 ENERGY STORAGE↗
DOE OSTI2025

Role of Pb/PbSO 4 Morphologies in Dynamic Charge Acceptance of Lead Acid Batteries

The dynamic charge acceptance (DCA) of negative pastes in lead acid batteries is studied using a continuum level model that is validated against in situ X-ray diffraction experiments. The model matches the current transient during a ten-minute, 2.4 V charge at 80% state of charge (SOC) using a distribution of PbSO 4 particles. <2% by volume of small, reactive particles is shown to provide ∼50% of the capacity during the first ten seconds. Increases in DCA with increasing carbon content are captured with increasing lead surface area. The increase in DCA when the 2.4 V charge is done after discharging to 80% SOC (vs charging to 80%) is captured by reducing the PbSO 4 particle sizes. It is hypothesized that the lower DCA after charging is caused by the absence of smaller particles that were consumed during the initial charge to 80% SOC, which is confirmed from X-ray measurements. Finally, two-particle case studies show that reducing the PbSO 4 particle size is more effective for increasing DCA than increasing the PbSO 4 dissolution rate alone. For a given lead surface area, the optimal DCA occurs when the particle sizes are large enough to avoid blocking the surface but small enough to provide dissolution/diffusion improvements.

Knehr, Kevin W. [Argonne National Laboratory (ANL)↗
DOE OSTI2026

Optimized Tandem Catalyst Patterning for CO 2 Reduction Flow Reactors

Tandem catalysis involves two or more catalysts arranged in proximity within a single reaction vessel, with the aim of synergistically aligning the catalysts’ reaction pathways to maximize overall system performance. This study presents a proof of concept showing the integration of continuum transport modeling with design optimization in a simplified two-dimensional flow reactor setup for electrochemical CO 2 reduction. Ag catalysts provide the CO 2 ⟶ CO reaction capability, and Cu catalysts provide the CO ⟶ high-value products reaction capability. Given a set of input parameters, the optimization algorithm uses adjoint methods to modify the Ag/Cu surface patterning in order to maximize the current density toward high-value products, such as ethylene. The optimized designs yield significant performance enhancement especially at more negative applied voltages (i.e., stronger surface reactions) and for larger numbers of patterning sections. For an applied voltage of −1.7 V vs. SHE, the 12-section optimized design increases the current density toward ethylene by up to 65% compared to the unoptimized 2-section design. For the optimized cases, observed differences in the production and consumption of CO (the key intermediate species) and minimized zones of low CO reactant surface concentration on Cu sections explain the improved reactor performance.

CO2 reduction↗
DOE OSTI2023

COWALKER:EFFECTIVE TRANSPORT PROPERTIES OF COMPOSITE MATERIALS

SF-23-026 This software computes effective transport properties of composite materials involving fibers and nanoparticles using a random-walk algorithm that efficiently scales to an arbitrary number of processes and cores. Effective transport properties (thermal, electrical) are key to bridge the microstructure of complex materials with its macroscopic behavior. Traditional approaches either use effective medium approximations (closed mathematical expressions that are approximation for certain conditions) or continuum simulation models such as finite element or finite volume, which require the generation of a mesh for each configuration explored. cowalker leverages the equivalence between laplacian or heat equation-based models and random walks to compute the asymptotic transport properties from an ensemble of first sojourn times of a random walker moving through the composite material. This allows us to directly define a composite material as a collection of particles and use algorithms developed for molecular dynamics to quickly compute the intersection of the walker with the different interfaces in the material. cowalker is developed in C++, and it relies on the GNU Scientific Library for random generation. cowalker is currently delivered as source code, so the GSL library is not included in cowalker's distribution. A more userfriendly version, cowalker.jl is currently in development and will be released as part of cowalker.

YANGUAS-GIL, ANGEL↗
DOE OSTI2021

Electromechanics of lipid-modulated gating of potassium channels

Experimental studies reveal that the anionic lipid phosphatidic acid (POPA), non-phospholipid cholesterol, and cationic lipid DOTAP inhibit the gating of voltage-sensitive potassium (Kv) channels. In this work, we develop a continuum electromechanical model to investigate the interaction of these lipids with the ion channel. Our model suggests that: (i) POPA lipids may restrict the vertical motion of the voltage-sensor domain through direct electrostatic interactions; (ii) cholesterol may oppose the radial motion of the pore domain of the channel by increasing the mechanical rigidity of the membrane; and (iii) DOTAP can reduce the effect of electrostatic forces by regulating the dielectric constant at the channel–lipid interface. The electromechanical model predictions for the three lipid types match well with the experimental observations and provide mechanistic insights into lipid-dependent gating of Kv channels.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Elastic interaction-induced anisotropic growth of dislocation loop arrays

The elastic interactions and reactions of dislocations lead to the formation of complex dislocation substructures, which is critical to the strain hardening and fatigue failure. Phase field dislocation dynamics simulations are conducted as a first step to understand the elastic interactions between dislocation loops. When the interloop spacing is small, the elastic interactions with neighboring loops become strong, rendering the edge segments strongly pinned, while allowing for the screw segments to propagate more easily. The interactions are found to result in an anisotropic stress distribution around the dislocation loops, leading to the formation of arrays of long, straight edge dislocations that could act as barriers to subsequent slip. Furthermore, the effect of initial loop size and applied strain rate on the elastic interaction-induced anisotropic pinning effect is investigated and discussed. Furthermore, the results are important for coarse-graining dislocation substructures formation into continuum level models of deformation in crystalline solids.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Potential Formation Damage: An Integrated Reservoir Characterization Study of the Naturally Fractured Carbonate Middle Duperow Formation at the Kevin Dome, Montana

In this study, we integrate geologic and engineering data of a naturally fractured carbonate reservoir at the Kevin Dome, Montana. Well test data are correlated with core description, geochemical and lithology study to determine the flow behavior and communication within the injection test interval and to the surrounding area. Based on a dual-continuum geologic model, numerical brine injection simulations are carried out to validate the interpretation results from our well test analytical models and forecast the probability of CO 2 injection success using current reservoir properties. As a result, our well test analytical models as well as lithology/core description suggest that fluid flow may be mainly restricted to the injection interval and the assumption of radial (horizontal) flow may be appropriate. The well test models also indicate that there is potentially formation damage with a positive skin factor although prior to brine injection well tests, well stimulation through acid treatment was performed. Our numerical simulation results appear to confirm this formation damage by showing additional pressure buildup in the injection data during later test periods. To explain this, acid may have dissolved dolomite then dolomite or calcite may have been formed again further into the matrix/fracture system. Another possible explanation is mechanical clogging of the fractures due to acid dissolving dolomite and dislodging fine grains. Our work also predicts that if no additional well stimulation is performed, the project will have a lower probability of successfully injecting 1 million tons of CO 2 into the Middle Duperow formation over 4 years.

42 ENGINEERING↗
DOE OSTI2023

Final Report on Development of Microwave Resonant Cavity Transducer for Fluid Flow Sensing: Development of Microwave Cavity Flow Meter for Advanced Reactor High Temperature Fluids

We are investigating a microwave resonant cavity transducer for flow sensing in the vessel of a high temperature fluid advanced reactor (AR), such as a molten salt cooled reactor (MSCR) or a sodium fast reactor (SFR). This transducer is a hollow metallic cylindrical cavity, with one of the flat walls of the cylinder flexible enough to undergo microscopic deflection due to dynamic fluid pressure. Membrane deflection leads to a shift in the microwave resonant frequency, which can be detected with a spectrum analyzer. We have developed a continuum electromechanics model of the microwave resonant cavity transducer performance. The deflection of the membrane is calculated using equations from the theory of plates and shells for deflection of radially constrained thin circular disk under uniform load. The microwave frequency shift is calculated using the equations from the microwave cavity perturbation theory. The transducer model was validated with proof-of-concept experimental data of water flow sensing with a Brass 360 right circular cylinder with 22.2mm diameter and 203µm thick wall. The cavity was excited through a subwavelength hole in TE 011 mode with resonant frequency f ≈ 17.8GHz. Subsequently, we have performed a preliminary proof-of-principle test of flow sensing in high temperature liquid sodium in environment. For this test, we have developed a cylindrical resonator with the same dimensions as for the Brass 360 cavity. The resonator for high temperature liquid sodium test was machined from stainless steel 316 and electroplated with silver on the interior surfaces. We have also developed and insertion probe consisting of a 50cm WR-42 brass waveguide enclosed in a protective SS316 tube. The cavity was excited through a subwavelength hole on the side of the wall of the cylinder in the TE 011 mode with resonant frequency f ≈ 17.8GHz. The liquid sodium setup consists of a cylindrical vessel with a center feed line, where a transducer inserted through the top cap of the vessel measures velocity of the impinging liquid jet. The sodium flow sensing study was performed in a liquid sodium vessel at 340°C temperature and ambient pressure. The flow rate was changed by varying sodium pump power, and a frequency shift of several hundred kHz was observed. The transducer was removed after 70 days of testing. No visual damage was observed, and the electromagnetic response remained the same. As a calibration experiment, we have assembled a water vessel with a center feed, and with dimensions similar to those of the liquid sodium setup. Water flow sensing was performed before and after liquid sodium test. The responses in both cases are similar and agree with COMSOL computer simulations. Because long-term (multi-year) experimental tests of transducer resilience to harsh environment are not practical, we have developed a probabilistic model of creep to estimate transducer resilience to the harsh environment. The probabilistic model considers diffusion creep under the condition of high temperature and low stress, where the stress and temperature are allowed to be random variables with Gaussian distributions. Using the probabilistic model, we estimate inelastic membrane deflections due to creep for several temperature ranges. We conclude that for temperatures less than 650°C, creep has negligible long-term effect on the transducer performance.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2024

MatCal Users Guide: Release 1.3.0

Any continuum mechanics model will require three components: (1) a discretized geometry of the boundary value problem being studied, (2) the partial differential equations to be solved, and (3) the initial conditions and boundary conditions for the problem. To describe material behavior in these computational models, material models contribute to (2) the underlying equations and, occasionally, to (3) the initial conditions for the simulation. These material models can exhibit a mathematical form that is empirically based, based on first principles, or developed from both empirical observations and known physics. In general, these models are meant to represent a class of materials with well understood behavior. As a result, material models have parameters that must be tuned or calibrated so that the model response matches characterization data available for the specific material it is intended to represent when used to simulate a specific system. For simple models, such as isotropic, linear elastic materials in solid mechanics, this calibration process can be a simple analytical calculation directly extracting the parameters from experimental measurements. For complex models that have many inputs and require many characterization datasets to adequately identify the material behavior, the model calibration process can require an inverse problem approach where an optimization is performed to tune the model parameters to the available data.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Hydrated Metal and Metal-Nitrate Complexes in Water: Full Lanthanide(III) Series plus Miscellaneous Metal Ions

This is a dataset of hydrated metal complexes and metal–nitrate hydrated complexes intended for public use, reproducibility, and downstream structural analysis. A key feature is coverage across the full lanthanide(III) series (La–Lu), enabling systematic comparisons of coordination motifs and bonding trends across the entire lanthanide sequence. In addition to the lanthanides, the dataset also includes other metal ions such as UO2(VI), Fe(II), and Fe(III). The dataset provides optimized geometries for hydrated and nitrate-containing hydrated complexes, together with representative ab initio molecular dynamics (AIMD) trajectories saved in standard XYZ formats. The accompanying NWChem input decks enable reproduction of the reported calculations and provide a starting point for extending the simulations to related coordination environments. Computationally, DFT calculations employ the B3LYP functional with DFT-D3BJ dispersion corrections and a COSMO continuum solvent model (dielectric constant 78.4) to represent solvation beyond the explicitly treated first hydration shell. AIMD simulations are performed with the NWChem qmd module at 298 K, integrating nuclear motion with the velocity-Verlet algorithm and controlling temperature using a Nosé–Hoover thermostat. Trajectories are approximately 4.8 ps in length and are used primarily to assess short-time stability of candidate coordination motifs, including (for lanthanides) differences between 8- versus 9-water coordination and comparisons between nitrate-bound and nitrate-free hydrated complexes.

Dinpajooh, Mohammadhasan [Pacific Northwest Nation↗
NASA NTRS1972

The investigation of vertebral injury sustained during aircrew ejection

A series of tests were performed on excised human vertebral segments to determine the static and dynamic response of the thoraco-lumbar spine when loaded in flexion. A total of fifteen tests were performed on eleven specimens. Specimens were obtained from male donors ranging in age from 34 to 60 years. Demographic data pertinent to each specimen and the elapsed time between death of the donor and testing of each corresponding specimen are presented. Only spinal segments comprised of lower thoracic and upper lumbar vertebrae were tested because in aircraft ejection injuries clinical complications in this anatomical region predominate. A complex continuum mathematical model describing the dynamic response of the human spine was formulated, solved, and verified experimentally. Detailed results are presented in figures, tables, and equations.

Benedict, J. V.↗
NASA NTRS1971

Analytical and experimental investigations of human spine flexure.

The authors report on experiments to measure the resistance of fresh human spines to flexion in the upper lumbar and lower thoracic regions and evaluate results by using a combination of strength of materials theory and effects of shear and comparing with data reported by other authors. The test results indicate that the thoraco-lumbar spine behaves approximately as a linear elastic beam, without relaxation effects. The authors formulate a simple continuum dynamic model of the spine simulating aircraft ejection and solve the resulting boundary value problem to illustrate the importance of the flexural mode. A constant cross-section, the selected model is a sinusoidally curved elastic beam with an end mass subjected to a Heaviside axial acceleration at the other end. The paper presents transient response results for the spinal model axial and bending displacements and axial force.-

Moffatt, C. A.↗